Skip to content

Instantly share code, notes, and snippets.

@zaneclaes
Created August 6, 2020 13:15
Show Gist options
  • Save zaneclaes/4582226accb1c81aafaa5a9a1f0f6d4c to your computer and use it in GitHub Desktop.
Save zaneclaes/4582226accb1c81aafaa5a9a1f0f6d4c to your computer and use it in GitHub Desktop.
client> $$
$0=10 (Step pulse time, microseconds)
$1=25 (Step idle delay, milliseconds)
$2=0$3=0 (Step pulse invert, mask)
$4=0 (Invert step enable pin, boolean)
$5=0 (Invert limit pins, boolean)
$6=0 (Invert probe pin, boolean)
$10=1 (Status report options, mask)
$11=0.010 (Junction deviation, millimeters)
$12=0.002 (Arc tolerance, millimeters)
$13=0 (Report in inches, boolean)
$20=0 (Soft limits enable, boolean)
$21=0 (Hard limits enable, boolean)
$22=1 (Homing cycle enable, boolean)
$23=0 (Homing direction invert, mask)
$24=250.000 (Homing locate feed rate, mm/min)
$25=500.000 (Homing search seek rate, mm/min)
$26=250 (Homing switch debounce delay, milliseconds)
$27=1.000 (Homing switch pull-off distance, millimeters)
$30=24000 (Maximum spindle speed, RPM)
$31=4000 (Minimum spindle speed, RPM)
$32=0 (Laser-mode enable, boolean)
$40=22528
$41=17408
$42=20480
$43=5000
$50=22528
$51=17408
$52=20480
$53=5000
$60=20480
$61=17408
$62=18432
$63=5000
$80=0
$81=2438.400
$82=1219.200
$83=3021.013
$84=577.850
$85=1.004
$86=1.003
$100=127.775 (X-axis travel resolution, step/mm)
$101=127.775 (Y-axis travel resolution, step/mm)
$102=918.750 (Z-axis travel resolution, step/mm)
$110=1000.000 (X-axis maximum rate, mm/min)
$111=1000.000 (Y-axis maximum rate, mm/min)
$112=250.000 (Z-axis maximum rate, mm/min)
$120=25.000 (X-axis acceleration, mm/sec^2)
$121=25.000 (Y-axis acceleration, mm/sec^2)
$122=10.000 (Z-axis acceleration, mm/sec^2)
$130=2500.000 (X-axis maximum travel, millimeters)
$131=1250.000 (Y-axis maximum travel, millimeters)
$132=25.000 (Z-axis maximum travel, millimeters)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment