Created
February 9, 2022 23:19
-
-
Save wbatty/4f778fa372c26a6b89038f00bd93444e to your computer and use it in GitHub Desktop.
ABS Config for Ender 5 w/ PEX bed
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by SuperSlicer 2.3.57 on 2022-02-09 at 23:15:44 UTC | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bed_custom_model = | |
| bed_custom_texture = | |
| bed_shape = 5x2.5,240x2.5,240x237.5,5x237.5 | |
| bed_temperature = 110 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n\n | |
| between_objects_gcode = | |
| bottom_fill_pattern = rectilinear | |
| bottom_solid_layers = 5 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 250 | |
| bridge_angle = 0 | |
| bridge_fan_speed = 30 | |
| bridge_flow_ratio = 0.94999999999999996 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| color_change_gcode = M600 | |
| colorprint_heights = | |
| compatible_printers_condition_cummulative = printer_model=~/(ENDER|CR|SERMOON).*/;printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ | |
| complete_objects = 0 | |
| cooling = 1 | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_acceleration = 500 | |
| default_filament_profile = "Creality PLA @CREALITY" | |
| default_print_profile = 0.20mm NORMAL @CREALITY | |
| deretract_speed = 20 | |
| disable_fan_first_layers = 3 | |
| dont_support_bridges = 1 | |
| draft_shield = 0 | |
| duplicate_distance = 6 | |
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | |
| end_gcode = END_PRINT | |
| ensure_vertical_shell_thickness = 1 | |
| external_perimeter_extrusion_width = 100% | |
| external_perimeter_speed = 22 | |
| external_perimeters_first = 0 | |
| extra_loading_move = -2 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 34 | |
| extruder_clearance_radius = 47 | |
| extruder_colour = #FCE94F | |
| extruder_offset = 0x0 | |
| extrusion_axis = E | |
| extrusion_multiplier = 1.14 | |
| extrusion_width = 111% | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #DDDDDD | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 20 | |
| filament_custom_variables = "" | |
| filament_density = 1.04 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = 5.5 | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_seam_gap = nil | |
| filament_settings_id = "MatterHackers ABS @ Benny" | |
| filament_soluble = 0 | |
| filament_spool_weight = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_vendor = Generic | |
| filament_wipe = nil | |
| filament_wipe_extra_perimeter = nil | |
| filament_wipe_only_crossing = nil | |
| filament_wipe_speed = nil | |
| fill_angle = 45 | |
| fill_density = 40% | |
| fill_pattern = grid | |
| first_layer_acceleration = 0 | |
| first_layer_bed_temperature = 110 | |
| first_layer_extrusion_width = 100% | |
| first_layer_height = 0.2 | |
| elefant_foot_compensation = 0.1 | |
| first_layer_speed = 12 | |
| first_layer_temperature = 245 | |
| full_fan_speed_layer = 4 | |
| gap_fill_last = 0 | |
| gap_fill_speed = 30 | |
| gcode_comments = 0 | |
| gcode_flavor = reprap | |
| gcode_label_objects = 1 | |
| gcode_precision_e = 5 | |
| gcode_precision_xyz = 3 | |
| high_current_on_filament_swap = 0 | |
| host_type = octoprint | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 100% | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 50 | |
| inherits_cummulative = "0.20mm NORMAL @CREALITY";"Generic ABS @CREALITY";"Creality Ender-5 0.4mm" | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z} | |
| layer_height = 0.2 | |
| machine_limits_usage = time_estimate_only | |
| machine_max_acceleration_e = 1000 | |
| machine_max_acceleration_extruding = 500 | |
| machine_max_acceleration_retracting = 1000 | |
| machine_max_acceleration_x = 500 | |
| machine_max_acceleration_y = 500 | |
| machine_max_acceleration_z = 100 | |
| machine_max_feedrate_e = 60 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 5 | |
| machine_max_jerk_e = 5 | |
| machine_max_jerk_x = 8 | |
| machine_max_jerk_y = 8 | |
| machine_max_jerk_z = 0.4 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_fan_speed = 0 | |
| max_gcode_per_second = 1500 | |
| max_layer_height = 0.32 | |
| max_print_height = 300 | |
| max_print_speed = 100 | |
| max_volumetric_speed = 0 | |
| min_fan_speed = 0 | |
| min_layer_height = 0.04 | |
| min_print_speed = 15 | |
| min_skirt_length = 4 | |
| notes = | |
| nozzle_diameter = 0.4 | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{print_time}_{layer_height}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| parking_pos_retraction = 92 | |
| pause_print_gcode = | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 100% | |
| perimeter_speed = 36 | |
| perimeters = 4 | |
| physical_printer_settings_id = | |
| post_process = | |
| print_custom_variables = | |
| print_settings_id = Voron ABS @ Benny | |
| printer_custom_variables = | |
| printer_model = ENDER5 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN | |
| printer_settings_id = Benny 0.4mm - Klipper | |
| printer_technology = FFF | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_port = | |
| raft_layers = 0 | |
| remaining_times = 0 | |
| remaining_times_type = m73 | |
| resolution = 0.0125 | |
| resolution_internal = 0.2 | |
| retract_before_travel = 2 | |
| retract_before_wipe = 70% | |
| retract_layer_change = 1 | |
| retract_length = 4 | |
| retract_length_toolchange = 1 | |
| retract_lift = 0 | |
| retract_lift_above = 0 | |
| retract_lift_below = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 50 | |
| seam_position = nearest | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 3 | |
| skirt_height = 2 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slowdown_below_layer_time = 20 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 100% | |
| solid_infill_speed = 40 | |
| solid_over_perimeters = 2 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| start_filament_gcode = "; Filament gcode\n" | |
| start_gcode = START_PRINT EXTRUDER_TEMP={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} BED_TEMP=[first_layer_bed_temperature] | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 1 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.35000000000000003 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 95% | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 40 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 40 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| temperature = 245 | |
| template_custom_gcode = | |
| thin_walls = 1 | |
| threads = 12 | |
| thumbnails = 0x0,0x0 | |
| toolchange_gcode = | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_width = 100% | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 5 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 150 | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| wipe_into_infill = 0 | |
| wipe_into_objects = 0 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 160 | |
| wipe_tower_y = 160 | |
| wiping_volumes_extruders = 70,70 | |
| wiping_volumes_matrix = 0 | |
| xy_size_compensation = 0 | |
| z_offset = 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment