Last active
October 11, 2018 09:43
-
-
Save vk496/4fe74c1b2f2649e33f9ad5e5c560b331 to your computer and use it in GitHub Desktop.
Strong 1200 logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
=================================================================== | |
MT7621 stage1 code Mar 12 2015 14:43:30 (ASIC) | |
CPU=500000000 HZ BUS=166666666 HZ | |
================================================================== | |
Change MPLL source from XTAL to CR... | |
do MEMPLL setting.. | |
MEMPLL Config : 0x31100000 | |
3PLL mode + External loopback | |
=== XTAL-40Mhz === DDR-800Mhz === | |
PLL2 FB_DL: 0xa, 1/0 = 615/409 29000000 | |
PLL4 FB_DL: 0xa, 1/0 = 565/459 29000000 | |
PLL3 FB_DL: 0x15, 1/0 = 608/416 55000000 | |
do DDR setting..[01F40000] | |
Apply DDR3 Setting...(use customer AC) | |
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 | |
-------------------------------------------------------------------------------- | |
0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 | |
000F:| 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 | |
0010:| 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 | |
0011:| 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 | |
0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
DRAMC_DQSCTL1[0e0]=14000000 | |
DRAMC_DQSGCTL[124]=80000000 | |
rank 0 coarse = 16 | |
rank 0 fine = 48 | |
B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 | |
opt_dle value:10 | |
DRAMC_DDR2CTL[07c]=C287222D | |
DRAMC_PADCTL4[0e4]=000022B3 | |
DRAMC_DQIDLY1[210]=0E0E0B0D | |
DRAMC_DQIDLY2[214]=0A0C0A0C | |
DRAMC_DQIDLY3[218]=0E0B0C0A | |
DRAMC_DQIDLY4[21c]=0E0A0F0B | |
DRAMC_R0DELDLY[018]=00002C2C | |
================================================================== | |
RX DQS perbit delay software calibration | |
================================================================== | |
1.0-15 bit dq delay value | |
================================================================== | |
bit| 0 1 2 3 4 5 6 7 8 9 | |
-------------------------------------- | |
0 | 11 10 13 13 11 10 11 10 9 11 | |
10 | 10 11 11 13 10 13 | |
-------------------------------------- | |
================================================================== | |
2.dqs window | |
x=pass dqs delay value (min~max)center | |
y=0-7bit DQ of every group | |
input delay:DQS0 =44 DQS1 = 44 | |
================================================================== | |
bit DQS0 bit DQS1 | |
0 (1~84)42 8 (2~85)43 | |
1 (1~86)43 9 (1~85)43 | |
2 (1~85)43 10 (1~85)43 | |
3 (1~86)43 11 (1~82)41 | |
4 (1~86)43 12 (2~86)44 | |
5 (1~87)44 13 (1~84)42 | |
6 (1~85)43 14 (1~87)44 | |
7 (1~88)44 15 (1~85)43 | |
================================================================== | |
3.dq delay value last | |
================================================================== | |
bit| 0 1 2 3 4 5 6 7 8 9 | |
-------------------------------------- | |
0 | 13 11 14 14 12 10 12 10 10 12 | |
10 | 11 14 11 15 10 14 | |
================================================================== | |
================================================================== | |
TX perbyte calibration | |
================================================================== | |
DQS loop = 15, cmp_err_1 = ffff0000 | |
dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 | |
dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 | |
DQ loop=15, cmp_err_1 = ffff0000 | |
dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 | |
dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 | |
byte:0, (DQS,DQ)=(8,8) | |
byte:1, (DQS,DQ)=(8,8) | |
DRAMC_DQODLY1[200]=88888888 | |
DRAMC_DQODLY2[204]=88888888 | |
20,data:88 | |
[EMI] DRAMC calibration passed | |
=================================================================== | |
MT7621 stage1 code done | |
CPU=500000000 HZ BUS=166666666 HZ | |
=================================================================== | |
U-Boot 1.1.3 (Aug 12 2015 - 14:27:48) | |
Board: Ralink APSoC DRAM: 128 MB | |
relocate_code Pointer at: 87fb8000 | |
Config XHCI 40M PLL | |
****************************** | |
Software System Reset Occurred | |
****************************** | |
flash manufacture id: c2, device id 20 18 | |
find flash: MX25L12805D | |
============================================ | |
Ralink UBoot Version: 4.3.0.0 | |
-------------------------------------------- | |
ASIC MT7621A SingleCore (MAC to MT7530 Mode) | |
DRAM_CONF_FROM: Auto-Detection | |
DRAM_TYPE: DDR3 | |
DRAM bus: 16 bit | |
Xtal Mode=3 OCP Ratio=1/3 | |
Flash component: SPI Flash | |
Date:Aug 12 2015 Time:14:27:48 | |
============================================ | |
icache: sets:256, ways:4, linesz:32 ,total:32768 | |
dcache: sets:256, ways:4, linesz:32 ,total:32768 | |
##### The CPU freq = 880 MHZ #### | |
estimate memory size =128 Mbytes | |
#Reset_MT7530 | |
set LAN/WAN LLLLW | |
Please choose the operation: | |
1: Load system code to SDRAM via TFTP. | |
2: Load system code then write to Flash via TFTP. | |
3: Boot system code via Flash (default). | |
4: Entr boot command line interface. | |
7: Load Boot Loader code then write to Flash via Serial. | |
9: Load Boot Loader code then write to Flash via TFTP. | |
0 | |
3: System Boot system code via Flash. | |
## Booting image at bc050000 ... | |
Image Name: WR1201_8_128 | |
Image Type: MIPS Linux Kernel Image (lzma compressed) | |
Data Size: 7295340 Bytes = 7 MB | |
Load Address: 80001000 | |
Entry Point: 8000f500 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
No initrd | |
## Transferring control to Linux (at address 8000f500) ... | |
## Giving linux memsize in MB, 128 | |
Starting kernel ... | |
LINUX started... | |
THIS IS ASIC | |
Linux version 2.6.36 (root@linux-qoyc) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1486 SMP Tue Nov 29 18:11:51 CST 2016 | |
The CPU feqenuce set to 880 MHz | |
GCMP present | |
CPU revision is: 0001992f (MIPS 1004Kc) | |
Software DMA cache coherency | |
Determined physical RAM map: | |
memory: 08000000 @ 00000000 (usable) | |
Initrd not found or empty - disabling initrd | |
Zone PFN ranges: | |
Normal 0x00000000 -> 0x00008000 | |
Movable zone start PFN for each node | |
early_node_map[1] active PFN ranges | |
0: 0x00000000 -> 0x00008000 | |
avail: cpu2 is not ready | |
avail: cpu3 is not ready | |
Detected 1 available secondary CPU(s) | |
PERCPU: Embedded 7 pages/cpu @81103000 s6464 r8192 d14016 u65536 | |
pcpu-alloc: s6464 r8192 d14016 u65536 alloc=16*4096 | |
pcpu-alloc: [0] 0 [0] 1 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
Kernel command line: console=ttyS1,57600n8 root=/dev/ram0 console=ttyS1,57600 root=/dev/ram0 rootfstype=squashfs,jffs2 | |
PID hash table entries: 512 (order: -1, 2048 bytes) | |
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. | |
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
Writing ErrCtl register=00011580 | |
Readback ErrCtl register=00011580 | |
Memory: 118124k/131072k available (4723k kernel code, 12948k reserved, 1682k data, 5040k init, 0k highmem) | |
Hierarchical RCU implementation. | |
Verbose stalled-CPUs detection is disabled. | |
NR_IRQS:128 | |
Trying to install interrupt handler for IRQ24 | |
Trying to install interrupt handler for IRQ25 | |
Trying to install interrupt handler for IRQ22 | |
Trying to install interrupt handler for IRQ9 | |
Trying to install interrupt handler for IRQ10 | |
Trying to install interrupt handler for IRQ11 | |
Trying to install interrupt handler for IRQ12 | |
Trying to install interrupt handler for IRQ13 | |
Trying to install interrupt handler for IRQ14 | |
Trying to install interrupt handler for IRQ16 | |
Trying to install interrupt handler for IRQ17 | |
Trying to install interrupt handler for IRQ18 | |
Trying to install interrupt handler for IRQ19 | |
Trying to install interrupt handler for IRQ20 | |
Trying to install interrupt handler for IRQ21 | |
Trying to install interrupt handler for IRQ23 | |
Trying to install interrupt handler for IRQ26 | |
Trying to install interrupt handler for IRQ27 | |
Trying to install interrupt handler for IRQ28 | |
Trying to install interrupt handler for IRQ15 | |
Trying to install interrupt handler for IRQ8 | |
Trying to install interrupt handler for IRQ29 | |
Trying to install interrupt handler for IRQ30 | |
Trying to install interrupt handler for IRQ31 | |
console [ttyS1] enabled | |
Calibrating delay loop... 579.58 BogoMIPS (lpj=1159168) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 512 | |
launch: starting cpu1 | |
launch: cpu1 gone! | |
CPU revision is: 0001992f (MIPS 1004Kc) | |
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. | |
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
Brought up 2 CPUs | |
Synchronize counters across 2 CPUs: done. | |
NET: Registered protocol family 16 | |
release PCIe RST: RALINK_RSTCTRL = 7000000 | |
PCIE PHY initialize | |
***** Xtal 40MHz ***** | |
start MT7621 PCIe register access | |
RALINK_RSTCTRL = 7000000 | |
RALINK_CLKCFG1 = 77ffeff8 | |
*************** MT7621 PCIe RC mode ************* | |
PCIE2 no card, disable it(RST&CLK) | |
pcie_link status = 0x3 | |
RALINK_RSTCTRL= 3000000 | |
*** Configure Device number setting of Virtual PCI-PCI bridge *** | |
RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2 | |
PCIE0 enabled | |
PCIE1 enabled | |
interrupt enable status: 300000 | |
Port 1 N_FTS = 1b105000 | |
Port 0 N_FTS = 1b105000 | |
config reg done | |
init_rt2880pci done | |
bio: create slab <bio-0> at 0 | |
vgaarb: loaded | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) | |
pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000) | |
pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] | |
pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] | |
pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] | |
pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] | |
pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] | |
pci 0000:00:00.0: BAR 1: set to [mem 0x60400000-0x6040ffff] (PCI address [0x60400000-0x6040ffff] | |
pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] | |
pci 0000:00:01.0: BAR 1: set to [mem 0x60410000-0x6041ffff] (PCI address [0x60410000-0x6041ffff] | |
pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] | |
pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff] | |
pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] | |
pci 0000:00:00.0: PCI bridge to [bus 01-01] | |
pci 0000:00:00.0: bridge window [io disabled] | |
pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] | |
pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] | |
pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] | |
pci 0000:02:00.0: BAR 0: set to [mem 0x60200000-0x602fffff 64bit] (PCI address [0x60200000-0x602fffff] | |
pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] | |
pci 0000:00:01.0: PCI bridge to [bus 02-02] | |
pci 0000:00:01.0: bridge window [io disabled] | |
pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] | |
pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] | |
BAR0 at slot 0 = 0 | |
bus=0x0, slot = 0x0 | |
res[0]->start = 0 | |
res[0]->end = 0 | |
res[1]->start = 60400000 | |
res[1]->end = 6040ffff | |
res[2]->start = 0 | |
res[2]->end = 0 | |
res[3]->start = 0 | |
res[3]->end = 0 | |
res[4]->start = 0 | |
res[4]->end = 0 | |
res[5]->start = 0 | |
res[5]->end = 0 | |
BAR0 at slot 1 = 0 | |
bus=0x0, slot = 0x1 | |
res[0]->start = 0 | |
res[0]->end = 0 | |
res[1]->start = 60410000 | |
res[1]->end = 6041ffff | |
res[2]->start = 0 | |
res[2]->end = 0 | |
res[3]->start = 0 | |
res[3]->end = 0 | |
res[4]->start = 0 | |
res[4]->end = 0 | |
res[5]->start = 0 | |
res[5]->end = 0 | |
bus=0x1, slot = 0x0, irq=0x4 | |
res[0]->start = 60000000 | |
res[0]->end = 600fffff | |
res[1]->start = 0 | |
res[1]->end = 0 | |
res[2]->start = 0 | |
res[2]->end = 0 | |
res[3]->start = 0 | |
res[3]->end = 0 | |
res[4]->start = 0 | |
res[4]->end = 0 | |
res[5]->start = 0 | |
res[5]->end = 0 | |
bus=0x2, slot = 0x1, irq=0x18 | |
res[0]->start = 60200000 | |
res[0]->end = 602fffff | |
res[1]->start = 0 | |
res[1]->end = 0 | |
res[2]->start = 0 | |
res[2]->end = 0 | |
res[3]->start = 0 | |
res[3]->end = 0 | |
res[4]->start = 0 | |
res[4]->end = 0 | |
res[5]->start = 0 | |
res[5]->end = 0 | |
Switching to clocksource MIPS | |
NET: Registered protocol family 2 | |
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
TCP established hash table entries: 4096 (order: 3, 32768 bytes) | |
TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
TCP: Hash tables configured (established 4096 bind 4096) | |
TCP reno registered | |
UDP hash table entries: 128 (order: 0, 4096 bytes) | |
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) | |
NET: Registered protocol family 1 | |
4 CPUs re-calibrate udelay(lpj = 1167360) | |
Load Ralink Timer0 Module | |
Load Ralink Timer1 Module | |
Load Ralink Timer2 Module | |
fuse init (API version 7.15) | |
msgmni has been set to 230 | |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) | |
io scheduler noop registered (default) | |
lp: driver loaded but no devices found | |
set_gpio_type: id[23] type[0] | |
set_gpio_type: id[22] type[0] | |
set_gpio_type: id[25] type[1] | |
init_MTC_private_led OK | |
Ralink gpio driver initialized | |
Enable Ralink HS_DMA Controller Module | |
reg_int_mask=0, INT_MASK= 10000 | |
HSDMA_init function | |
phy_tx_ring0 = 0x07d48000, tx_ring0 = 0xa7d48000 | |
phy_rx_ring0 = 0x07d49000, rx_ring0 = 0xa7d49000 | |
TX_CTX_IDX0 = 0 | |
TX_DTX_IDX0 = 0 | |
RX_CRX_IDX0 = ff | |
RX_DRX_IDX0 = 0 | |
HSDMA_GLO_CFG = 475 | |
Enable Ralink GDMA Controller Module | |
GDMA IP Version=3 | |
spidrv_major = 217 | |
i2cdrv_major = 218 | |
spdif_mod_init: start SPDIF module | |
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A | |
serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A | |
brd: module loaded | |
flash manufacture id: c2, device id 20 18 | |
MX25L12805D(c2 2018c220) (16384 Kbytes) | |
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 | |
Creating 6 MTD partitions on "raspi": | |
0x000000000000-0x000001000000 : "ALL" | |
0x000000000000-0x000000030000 : "Bootloader" | |
0x000000030000-0x000000040000 : "Config" | |
0x000000040000-0x000000050000 : "Factory" | |
0x000000050000-0x000000ff0000 : "Kernel" | |
0x000000ff0000-0x000001000000 : "Second_Config" | |
rdm_major = 253 | |
GMAC1_MAC_ADRH -- : 0x0000000c | |
GMAC1_MAC_ADRL -- : 0x432880ad | |
Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500! | |
GMAC1_MAC_ADRH -- : 0x0000000c | |
GMAC1_MAC_ADRL -- : 0x43288003 | |
PROC INIT OK! | |
PPP generic driver version 2.4.2 | |
PPP BSD Compression module registered | |
PPP MPPE Compression module registered | |
NET: Registered protocol family 24 | |
PPTP driver version 0.8.5 | |
IMQ driver loaded successfully. | |
Hooking IMQ before NAT on PREROUTING. | |
Hooking IMQ after NAT on POSTROUTING. | |
usbcore: registered new interface driver catc | |
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
register rt2860 | |
=== pAd = c0282000, size = 2173440 === | |
<-- RTMPAllocTxRxRingMemory, Status=0 | |
<-- RTMPAllocAdapterBlock, Status=0 | |
pAd->CSRBaseAddress =0xc0180000, csr_addr=0xc0180000! | |
device_id =0x7662 | |
==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a | |
RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5 | |
RtmpEepromGetDefault::e2p_dafault=3 | |
NVM is efuse and the information is too less to bring up the interface | |
Force to use Flash mode | |
NVM is FLASH mode (pAd->flash_offset = 0x48000) | |
get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai | |
=== pAd = c0602000, size = 2173440 === | |
<-- RTMPAllocTxRxRingMemory, Status=0 | |
<-- RTMPAllocAdapterBlock, Status=0 | |
pAd->CSRBaseAddress =0xc0500000, csr_addr=0xc0500000! | |
device_id =0x7662 | |
==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a | |
RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5 | |
RtmpEepromGetDefault::e2p_dafault=3 | |
NVM is efuse and the information is too less to bring up the interface | |
Force to use Flash mode | |
NVM is FLASH mode (pAd->flash_offset = 0x40000) | |
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=ra | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
FM_OUT value: u4FmOut = 0(0x00000000) | |
xhc_mtk xhc_mtk: xHCI Host Controller | |
xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 | |
xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 2 ports detected | |
xhc_mtk xhc_mtk: xHCI Host Controller | |
xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 1 port detected | |
usbcore: registered new interface driver usbserial | |
USB Serial support registered for generic | |
usbcore: registered new interface driver usbserial_generic | |
usbserial: USB Serial Driver core | |
Netfilter messages via NETLINK v0.30. | |
nf_conntrack version 0.5.0 (1845 buckets, 7380 max) | |
matchsize=264 | |
xt_time: kernel timezone is -0000 | |
IPVS: Registered protocols () | |
IPVS: Connection hash table configured (size=4096, memory=32Kbytes) | |
IPVS: ipvs loaded. | |
GRE over IPv4 demultiplexor driver | |
gre: can't add protocol | |
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone | |
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
arp_tables: (C) 2002 David S. Miller | |
TCP cubic registered | |
NET: Registered protocol family 17 | |
L2TP core driver, V2.0 | |
PPPoL2TP kernel driver, V2.0 | |
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> | |
All bugs added by David S. Miller <davem@redhat.com> | |
>>>wsc_negotiate_info_init:r[0]<<< | |
>>>private_domain_init:r[0]<<< | |
Warning: unable to open an initial console. | |
Freeing unused kernel memory: 5040k freed | |
Algorithmics/MIPS FPU Emulator v1.5 | |
Welcome to | |
__ ___ _____ _____ _ _______ ______ _____ _ ___ | |
| \ / || ___|| __ \ | || __ ||__ __|| ___|| | / / | |
| ^ || |__ | | \ \| || | | | | | | |__ | |/ / | |
| | | || ___|| | | || || |__| | | | | ___|| \ | |
| | | || |___ | |__/ /| || __ | | | | |___ | |\ \ | |
|__| |___||_____||_____/ |_||_| |_| |_| |_____||_| \__\ | |
= Everyday Genius = | |
Give root password for system maintenance | |
(or type Control-D for normal startup): | |
Have a lot of fun... | |
Password for 'admin' changed | |
>>>chpasswd_root<<< | |
iptables>>>PRIVATE_DOMAIN_IOCTL_SET g_sz_private_domain=strong.1200.wr<<< | |
v1.4.10: | |
The "nat" table is not intended for filtering, the use of DROP is therefore inhibited. | |
Try `iptables -h' or 'iptables --help' for more information. | |
>>>PRIVATE_DOMAIN_IOCTL_GET g_sz_private_domain=strong.1200.wr<<< | |
>>>kernel_private_domain = strong.1200.wr<<< | |
==>dnsProxyInit... | |
==>filterInit... | |
==>natFunctionInit... | |
==>firewallFunctionInit... | |
==>qosInit... | |
==>systoolServiceInit... | |
==>IPTVServiceInit... | |
==>staticRouteFunctionInit... | |
Raeth v3.1 (Tasklet) | |
phy_free_head is 0x5e00000!!! | |
phy_free_tail_phy is 0x5e01ff0!!! | |
txd_pool=a5e02000 phy_txd_pool=05E02000 | |
ei_local->skb_free start address is 0x87ce9494. | |
free_txd: a5e02010, ei_local->cpu_ptr: 05E02000 | |
POOL HEAD_PTR | DMA_PTR | CPU_PTR | |
----------------+---------+-------- | |
0xa5e02000 0x05E02000 0x05E02000 | |
phy_qrx_ring = 0x05df9000, qrx_ring = 0xa5df9000 | |
phy_rx_ring0 = 0x05e04000, rx_ring0 = 0xa5e04000 | |
change HW-TRAP to 0x17ccf | |
set LAN/WAN LLLLW | |
GMAC1_MAC_ADRH -- : 0x0000000c | |
GMAC1_MAC_ADRL -- : 0x43288003 | |
CDMA_CSG_CFG = 81000000 | |
GDMA1_FWD_CFG = 20710000 | |
ra2880stop()...Done | |
Free TX/RX Ring Memory! | |
Raeth v3.1 (Tasklet) | |
phy_free_head is 0x5d30000!!! | |
phy_free_tail_phy is 0x5d31ff0!!! | |
txd_pool=a5d32000 phy_txd_pool=05D32000 | |
ei_local->skb_free start address is 0x87ce9494. | |
free_txd: a5d32010, ei_local->cpu_ptr: 05D32000 | |
POOL HEAD_PTR | DMA_PTR | CPU_PTR | |
----------------+---------+-------- | |
0xa5d32000 0x05D32000 0x05D32000 | |
phy_qrx_ring = 0x05d49000, qrx_ring = 0xa5d49000 | |
phy_rx_ring0 = 0x05d34000, rx_ring0 = 0xa5d34000 | |
change HW-TRAP to 0x17ccf | |
set LAN/WAN LLLLW | |
GMAC1_MAC_ADRH -- : 0x00000016 | |
GMAC1_MAC_ADRL -- : 0xfbc6a38e | |
CDMA_CSG_CFG = 81000000 | |
GDMA1_FWD_CFG = 20710000 | |
ifconfig: SIOCSIFHWADDR: Device or resource busy | |
device eth2 entered promiscuous mode | |
switch reg write offset=2004, value=ff0003 | |
switch reg write offset=2104, value=ff0003 | |
switch reg write offset=2204, value=ff0003 | |
switch reg write offset=2304, value=ff0003 | |
switch reg write offset=2404, value=ff0003 | |
switch reg write offset=2504, value=ff0003 | |
switch reg write offset=2010, value=810000c0 | |
switch reg write offset=2110, value=810000c0 | |
switch reg write offset=2210, value=810000c0 | |
switch reg write offset=2310, value=810000c0 | |
switch reg write offset=2410, value=810000c0 | |
switch reg write offset=2510, value=810000c0 | |
switch reg write offset=2610, value=81000000 | |
switch reg write offset=2710, value=81000000 | |
switch reg write offset=2604, value=20ff0003 | |
switch reg write offset=2704, value=20ff0003 | |
switch reg write offset=2610, value=81000000 | |
switch reg write offset=2014, value=10001 | |
switch reg write offset=2114, value=10001 | |
switch reg write offset=2214, value=10001 | |
switch reg write offset=2314, value=10001 | |
switch reg write offset=2414, valudevice eth2.1 entered promiscuous mode | |
e=10002 | |
switch reg write offset=2514, value=10001 | |
REG_ESW_WT_MAC_ATC is 0x7ff0002 | |
done. | |
br0: port 1(eth2.1) entering learning state | |
br0: port 1(eth2.1) entering learning state | |
Unable to open /etc/udhcpd.leases for reading | |
ReStart wireless Now | |
br0: port 1(eth2.1) entering forwarding state | |
ESW: Link Status Changed - Port0 Link UP | |
>>webdir[/etc_ro/web_root] | |
>>websDefaultPage[main.asp] | |
build time = | |
20141115060606a | |
rom patch for E3 IC | |
platform = | |
ALPS | |
hw/sw version = | |
�� | |
patch version = | |
FW Version:0.0.00 Build:1 | |
Build Time:201507311614____ | |
fw for E3 IC | |
RX[0] DESC a6375000 size = 4096 | |
RX[1] DESC a6376000 size = 4096 | |
E2pAccessMode=0 | |
cfg_mode=9 | |
cfg_mode=9 | |
wmode_band_equal(): Band Equal! | |
APSDCapable[0]=0 | |
APSDCapable[1]=0 | |
APSDCapable[2]=0 | |
APSDCapable[3]=0 | |
APSDCapable[4]=0 | |
APSDCapable[5]=0 | |
APSDCapable[6]=0 | |
APSDCapable[7]=0 | |
APSDCapable[8]=0 | |
APSDCapable[9]=0 | |
APSDCapable[10]=0 | |
APSDCapable[11]=0 | |
APSDCapable[12]=0 | |
APSDCapable[13]=0 | |
APSDCapable[14]=0 | |
APSDCapable[15]=0 | |
default ApCliAPSDCapable[0]=0 | |
Key1Str is Invalid key length(0) or Type(0) | |
Key2Str is Invalid key length(0) or Type(0) | |
Key3Str is Invalid key length(0) or Type(0) | |
Key4Str is Invalid key length(0) or Type(0) | |
1. Phy Mode = 14 | |
get_chl_grp:illegal channel (167) | |
get_chl_grp:illegal channel (167) | |
get_chl_grp:illegal channel (169) | |
get_chl_grp:illegal channel (169) | |
get_chl_grp:illegal channel (171) | |
get_chl_grp:illegal channel (171) | |
drivers/net/wireless/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed | |
Country Region from e2p = ffff | |
mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 | |
mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=2 | |
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0 | |
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16 | |
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0 | |
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5 | |
mt76x2_get_external_lna_gain::LNA type=0x10, BLNAGain=0xffffff8e, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c | |
2. Phy Mode = 14 | |
3. Phy Mode = 14 | |
andes_pci_fw_init | |
0x1300 = 00073200 | |
AntCfgInit: primary/secondary ant 0/1 | |
andes_load_cr:cr_type(2) | |
ChipStructAssign(): MT76x2 hook ! | |
RTMPSetPhyMode: channel is out of range, use first channel=0 | |
MCS Set = ff ff 00 00 01 | |
===================================================== | |
Channel 1 : Dirty = 33, ApCnt=10, Busy Time = 0, Skip Channel = FALSE | |
Channel 2 : Dirty = 4, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 3 : Dirty = 5, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 4 : Dirty = 34, ApCnt=3, Busy Time = 0, Skip Channel = FALSE | |
Channel 5 : Dirty = 35, ApCnt=1, Busy Time = 0, Skip Channel = FALSE | |
Channel 6 : Dirty = 34, ApCnt=4, Busy Time = 0, Skip Channel = FALSE | |
Channel 7 : Dirty = 5, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 8 : Dirty = 5, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 9 : Dirty = 4, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 10 : Dirty = 3, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 11 : Dirty = 31, ApCnt=2, Busy Time = 0, Skip Channel = FALSE | |
Channel 12 : Dirty = 2, ApCnt=0, Busy Time = 0, Skip Channel = TRUE | |
Channel 13 : Dirty = 31, ApCnt=3, Busy Time = 0, Skip Channel = TRUE | |
===================================================== | |
Rule 2 APCnt : minimum APCnt with minimum interference(dirtiness: 30~32) ==> Select Channel 11 | |
Dirtiness = 31 , Min ApCnt = 2 | |
mt76x2_bbp_adjust():rf_bw=1, ext_ch=3, PrimCh=11, HT-CentCh=9, VHT-CentCh=0 | |
APStartUp(): AP Set CentralFreq at 9(Prim=11, HT-CentCh=9, VHT-CentCh=0, BBP_BW=1) | |
mt76x2_calibration(channel = 9) | |
@@@ ed_monitor_init : ===> | |
@@@ ed_monitor_init : <=== | |
Main bssid = 00:16:fb:c6:a3:8c | |
mt76x2_reinit_agc_gain:original agc_vga0 = 0x44, agc_vga1 = 0x44 | |
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x44, agc_vga1 = 0x44 | |
mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x35, hi_lna1 = 0x35 | |
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x35, hi_lna1 = 0x35 | |
original vga value(chain0) = 44 | |
original vga value(chain1) = 44 | |
<==== rt28xx_init, Status=0 | |
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apcli | |
RTMPDrvOpen(1):Check if PDMA is idle! | |
RTMPDrvOpen(2):Check if PDMA is idle! | |
@@@ ed_monitor_init : ===> | |
@@@ ed_monitor_init : <=== | |
device ra0 entered promiscuous mode | |
br0: port 2(ra0) entering learning state | |
br0: port 2(ra0) entering learning state | |
build time = | |
20141115060606a | |
rom patch for E3 IC | |
platform = | |
ALPS | |
hw/sw version = | |
�� | |
patch version = | |
FW Version:0.0.00 Build:1 | |
Build Time:201507311614____ | |
fw for E3 IC | |
RX[0] DESC a6130000 size = 4096 | |
RX[1] DESC a6131000 size = 4096 | |
E2pAccessMode=0 | |
cfg_mode=14 | |
cfg_mode=14 | |
wmode_band_equal(): Band Not Equal! | |
APSDCapable[0]=0 | |
APSDCapable[1]=0 | |
APSDCapable[2]=0 | |
APSDCapable[3]=0 | |
APSDCapable[4]=0 | |
APSDCapable[5]=0 | |
APSDCapable[6]=0 | |
APSDCapable[7]=0 | |
APSDCapable[8]=0 | |
APSDCapable[9]=0 | |
APSDCapable[10]=0 | |
APSDCapable[11]=0 | |
APSDCapable[12]=0 | |
APSDCapable[13]=0 | |
APSDCapable[14]=0 | |
APSDCapable[15]=0 | |
default ApCliAPSDCapable[0]=0 | |
Key1Str is Invalid key length(0) or Type(0) | |
Key2Str is Invalid key length(0) or Type(0) | |
Key3Str is Invalid key length(0) or Type(0) | |
Key4Str is Invalid key length(0) or Type(0) | |
1. Phy Mode = 49 | |
get_chl_grp:illegal channel (167) | |
get_chl_grp:illegal channel (167) | |
get_chl_grp:illegal channel (169) | |
get_chl_grp:illegal channel (169) | |
get_chl_grp:illegal channel (171) | |
get_chl_grp:illegal channel (171) | |
drivers/net/wireless/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed | |
Country Region from e2p = ffff | |
mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 | |
mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=0 | |
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 | |
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=13, low_temp_slope=16 | |
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 | |
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=-7, tc_upper_bound=5 | |
mt76x2_get_external_lna_gain::LNA type=0x0, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8c, ALNAGain1=0xffffff8c, ALNAGain2=0xffffff8c | |
2. Phy Mode = 49 | |
3. Phy Mode = 49 | |
andes_pci_fw_init | |
0x1300 = 00073200 | |
AntCfgInit: primary/secondary ant 0/1 | |
andes_load_cr:cr_type(2) | |
ChipStructAssign(): MT76x2 hook ! | |
RTMPSetPhyMode: channel is out of range, use first channel=0 | |
MCS Set = ff ff 00 00 00 | |
br0: port 2(ra0) entering forwarding state | |
===================================================== | |
Channel 36 : Dirty = 32, ApCnt=1, Busy Time = 0, Skip Channel = FALSE | |
Channel 40 : Dirty = 2, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
Channel 44 : Dirty = 32, ApCnt=1, Busy Time = 0, Skip Channel = FALSE | |
Channel 48 : Dirty = 2, ApCnt=0, Busy Time = 0, Skip Channel = FALSE | |
===================================================== | |
Rule 2 APCnt : minimum APCnt with minimum interference(dirtiness: 30~32) ==> Select Channel 36 | |
Dirtiness = 32 , Min ApCnt = 1 | |
mt76x2_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=36, HT-CentCh=36, VHT-CentCh=42 | |
APStartUp(): AP Set CentralFreq at 36(Prim=36, HT-CentCh=36, VHT-CentCh=42, BBP_BW=0) | |
mt76x2_calibration(channel = 36) | |
@@@ ed_monitor_init : ===> | |
@@@ ed_monitor_init : <=== | |
Main bssid = 00:16:fb:c6:b3:8c | |
mt76x2_reinit_agc_gain:original agc_vga0 = 0x4a, agc_vga1 = 0x4a | |
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x4a, agc_vga1 = 0x4a | |
mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x33, hi_lna1 = 0x33 | |
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x33, hi_lna1 = 0x33 | |
original vga value(chain0) = 4a | |
original vga value(chain1) = 4a | |
<==== rt28xx_init, Status=0 | |
get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii | |
RTMPDrvOpen(1):Check if PDMA is idle! | |
RTMPDrvOpen(2):Check if PDMA is idle! | |
@@@ ed_monitor_init : ===> | |
@@@ ed_monitor_init : <=== | |
device rai0 entered promiscuous mode | |
br0: port 3(rai0) entering learning state | |
br0: port 3(rai0) entering learning state | |
wirelessAp force reset bw | |
Interface doesn't accept private ioctl... | |
set (8BE2): Invalid argument | |
set_ed_chk_proc(): ed_chk=0 | |
@@@ ed_monitor_exit : ===> | |
@@@ ed_monitor_exit : <=== | |
set_ed_chk_proc(): ed_chk=1 | |
@@@ ed_monitor_init : ===> | |
@@@ ed_monitor_init : <=== | |
>>>WSC_NEGOTIATE_INFO_REG_PID program_pid=1371<<< | |
br0: port 3(rai0) entering forwarding state | |
iptables: No chain/target/match by that name. | |
iptables: No chain/target/match by that name. | |
parsing error file /etc/miniupnpd.config line 14 : friendly_name=Dual Band Gigabit Router 1200 | |
create rclPrivateTimer OK | |
Feb 8 00:00:13 miniupnpd[1686]: HTTP listening on port 5500 | |
Feb 8 00:00:13 miniupnpd[1686]: Listening for NAT-PMP traffic on port 5351 | |
insmod: usbcore.ko: module not found | |
insmod: ehci-hcd.ko: module not found | |
insmod: ohci-hcd.ko: module not found | |
insmod: xhci-hcd.ko: module not found | |
Initializing USB Mass Storage driver... | |
usbcore: registered new interface driver usb-storage | |
USB Mass Storage support registered. | |
MTK MSDC device init. | |
msdc0 -> ops_get_cd return<0> <- msdc_ops_get_cd() : L<2317> PID<kworker/u:1><0x1a> | |
mtk-sd: MediaTek MT6575 MSDC Driver | |
usbcore: registered new interface driver usblp | |
Wireless reset gain value... | |
ra0 mac: | |
[0x2320]:18360af8 | |
ra0 mac: | |
[0x2324]:18360af8 | |
Wireless reset gain value... | |
ra0 mac: | |
[0x2320]:18360af8 | |
ra0 mac: | |
[0x2324]:18360af8 | |
Wireless reset gain value... | |
ra0 mac: | |
[0x2320]:18360af8 | |
ra0 mac: | |
[0x2324]:18360af8 | |
Wireless reset gain value... | |
ra0 mac: | |
[0x2320]:18360af8 | |
ra0 mac: | |
[0x2324]:18360af8 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/dts-v1/; | |
#include "mt7621.dtsi" | |
#include <dt-bindings/gpio/gpio.h> | |
#include <dt-bindings/input/input.h> | |
/ { | |
compatible = "strong,wr1200", "mediatek,mt7621-soc"; | |
model = "Strong 1200"; | |
aliases { | |
led-boot = &led_power; | |
led-failsafe = &led_power; | |
led-running = &led_power; | |
led-upgrade = &led_power; | |
}; | |
memory@0 { | |
device_type = "memory"; | |
reg = <0x0 0x8000000>; | |
}; | |
chosen { | |
bootargs = "console=ttyS0,57600"; | |
}; | |
gpio-leds { | |
compatible = "gpio-leds"; | |
led_power: power { | |
label = "wr1200:green:power"; | |
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; | |
}; | |
usb { | |
label = "wr1200:green:usb"; | |
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; | |
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; | |
linux,default-trigger = "usbport"; | |
}; | |
data { | |
label = "wr1200:green:data"; | |
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; | |
}; | |
}; | |
gpio-keys-polled { | |
compatible = "gpio-keys-polled"; | |
poll-interval = <20>; | |
reset { | |
label = "reset"; | |
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; | |
linux,code = <KEY_RESTART>; | |
}; | |
}; | |
}; | |
&spi0 { | |
status = "okay"; | |
m25p80@0 { | |
compatible = "jedec,spi-nor"; | |
reg = <0>; | |
spi-max-frequency = <10000000>; | |
m25p,chunked-io = <32>; | |
partitions { | |
compatible = "fixed-partitions"; | |
#address-cells = <1>; | |
#size-cells = <1>; | |
partition@0 { | |
label = "Bootloader"; | |
reg = <0x0 0x30000>; | |
read-only; | |
}; | |
partition@30000 { | |
label = "Config"; | |
reg = <0x30000 0x10000>; | |
read-only; | |
}; | |
factory: partition@40000 { | |
label = "Factory"; | |
reg = <0x40000 0x10000>; | |
read-only; | |
}; | |
partition@50000 { | |
label = "firmware"; | |
reg = <0x50000 0xfa0000>; | |
}; | |
partition@FF0000 { | |
label = "Second_Config"; | |
reg = <0xFF0000 0x10000>; | |
read-only; | |
}; | |
}; | |
}; | |
}; | |
ðernet { | |
mtd-mac-address = <&factory 0x00000004>; | |
mediatek,portmap = "llllw"; | |
}; | |
&sdhci { | |
status = "okay"; | |
}; | |
&pcie { | |
status = "okay"; | |
}; | |
&pcie0 { | |
mt76@0,0 { | |
reg = <0x0000 0 0 0 0>; | |
mediatek,mtd-eeprom = <&factory 0x8000>; | |
ieee80211-freq-limit = <5000000 6000000>; | |
}; | |
}; | |
&pcie1 { | |
mt76@0,0 { | |
reg = <0x0000 0 0 0 0>; | |
mediatek,mtd-eeprom = <&factory 0x0000>; | |
ieee80211-freq-limit = <2400000 2500000>; | |
}; | |
}; | |
&pinctrl { | |
state_default: pinctrl0 { | |
gpio { | |
ralink,group = "i2c", "uart2", "uart3", "rgmii2"; | |
ralink,function = "gpio"; | |
}; | |
}; | |
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
## Booting image at bc050000 ... | |
Image Name: MIPS OpenWrt Linux-4.14.74 | |
Image Type: MIPS Linux Kernel Image (lzma compressed) | |
Data Size: 3219611 Bytes = 3.1 MB | |
Load Address: 80001000 | |
Entry Point: 80001000 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
No initrd | |
## Transferring control to Linux (at address 80001000) ... | |
## Giving linux memsize in MB, 128 | |
Starting kernel ... | |
[ 0.000000] Linux version 4.14.74 (vk496@vk496-pc) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8222-6ef1c978ba)) #0 SMP Mon Oct 8 08:03:23 2018 | |
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.000000] MIPS: machine is Strong 1200 | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 08000000 @ 00000000 (usable) | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] VPE topology {2} total 2 | |
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] HighMem empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0 | |
[ 0.000000] percpu: Embedded 14 pages/cpu @8110e000 s26192 r8192 d22960 u57344 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 | |
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 | |
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | |
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Writing ErrCtl register=00011586 | |
[ 0.000000] Readback ErrCtl register=00011586 | |
[ 0.000000] Memory: 122388K/131072K available (4362K kernel code, 221K rwdata, 972K rodata, 1536K init, 241K bss, 8684K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS: 256 | |
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns | |
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns | |
[ 0.000011] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns | |
[ 0.015503] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) | |
[ 0.087800] pid_max: default: 32768 minimum: 301 | |
[ 0.097104] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.110119] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.125818] Hierarchical SRCU implementation. | |
[ 0.135121] smp: Bringing up secondary CPUs ... | |
[ 0.145171] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.145180] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.145192] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.145340] CPU1 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.204569] Synchronize counters for CPU 1: done. | |
[ 0.264246] smp: Brought up 1 node, 2 CPUs | |
[ 0.275635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.295109] futex hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.307363] pinctrl core: initialized pinctrl subsystem | |
[ 0.319237] NET: Registered protocol family 16 | |
[ 0.332778] rt2880-pinmux pinctrl: error claiming hogs: -22 | |
[ 0.343765] rt2880-pinmux pinctrl: could not claim hogs: -22 | |
[ 0.355039] rt2880-pinmux: probe of pinctrl failed with error -22 | |
[ 0.386622] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 0.397952] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 0.409230] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 0.424702] clocksource: Switched to clocksource GIC | |
[ 0.436448] NET: Registered protocol family 2 | |
[ 0.445774] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.459516] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) | |
[ 0.472130] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 0.484850] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.496366] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.509020] NET: Registered protocol family 1 | |
[ 1.914613] 4 CPUs re-calibrate udelay(lpj = 2924544) | |
[ 1.926004] Crashlog allocated RAM at address 0x3f00000 | |
[ 1.936500] workingset: timestamp_bits=30 max_order=15 bucket_order=0 | |
[ 1.958426] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 1.969938] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 1.993350] io scheduler noop registered | |
[ 2.001170] io scheduler deadline registered (default) | |
[ 2.012204] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
[ 2.026434] console [ttyS0] disabled | |
[ 2.033450] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A | |
[ 2.051518] console [ttyS0] enabled | |
[ 2.051518] console [ttyS0] enabled | |
[ 2.065231] bootconsole [early0] disabled | |
[ 2.065231] bootconsole [early0] disabled | |
[ 2.082455] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
[ 2.096168] libphy: Fixed MDIO Bus: probed | |
[ 2.176446] mtk_soc_eth 1e100000.ethernet: generated random MAC address 9a:db:4b:7f:ef:5b | |
[ 2.192922] libphy: mdio: probed | |
[ 3.611031] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver | |
[ 3.623653] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16 | |
[ 3.643172] NET: Registered protocol family 10 | |
[ 3.653477] Segment Routing with IPv6 | |
[ 3.660900] NET: Registered protocol family 17 | |
[ 3.669800] 8021q: 802.1Q VLAN Support v1.8 | |
[ 3.680971] hctosys: unable to open rtc device (rtc0) | |
[ 3.698903] Freeing unused kernel memory: 1536K | |
[ 3.707960] This architecture does not have kernel memory protection. | |
[ 3.730544] init: Console is alive | |
[ 3.737688] init: - watchdog - | |
[ 3.755639] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
[ 3.774050] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up | |
[ 3.790832] usbcore: registered new interface driver usbfs | |
[ 3.801943] usbcore: registered new interface driver hub | |
[ 3.812692] usbcore: registered new device driver usb | |
[ 3.833083] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator | |
[ 3.850495] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator | |
[ 3.868210] xhci-mtk 1e1c0000.xhci: xHCI Host Controller | |
[ 3.878837] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 | |
[ 3.904938] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010 | |
[ 3.921859] xhci-mtk 1e1c0000.xhci: irq 15, io mem 0x1e1c0000 | |
[ 3.934327] random: fast init done | |
[ 3.934393] hub 1-0:1.0: USB hub found | |
[ 3.934484] hub 1-0:1.0: 2 ports detected | |
[ 3.935292] xhci-mtk 1e1c0000.xhci: xHCI Host Controller | |
[ 3.935328] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 | |
[ 3.935355] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed | |
[ 3.935539] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 3.936482] hub 2-0:1.0: USB hub found | |
[ 3.936559] hub 2-0:1.0: 1 port detected | |
[ 3.938939] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
[ 4.055060] init: - preinit - | |
[ 4.215120] mtk_soc_eth 1e100000.ethernet: PPE started | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
[ 7.349856] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818 | |
[ 7.371702] procd: - early - | |
[ 7.377683] procd: - watchdog - | |
[ 8.004808] procd: - watchdog - | |
[ 8.011377] procd: - ubus - | |
[ 8.022159] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 8.075243] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 8.088278] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 8.101787] procd: - init - | |
Please press Enter to activate this console. | |
[ 8.239496] kmodloader: loading kernel modules from /etc/modules.d/* | |
[ 8.255833] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 8.276106] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 8.293119] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) | |
[ 8.340837] xt_time: kernel timezone is -0000 | |
[ 8.355976] PPP generic driver version 2.4.2 | |
[ 8.366526] NET: Registered protocol family 24 | |
[ 8.378095] kmodloader: done loading kernel modules from /etc/modules.d/* | |
[ 9.471008] urandom_read: 5 callbacks suppressed | |
[ 9.471022] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 9.544038] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 12.489233] mtk_soc_eth 1e100000.ethernet: PPE started | |
[ 12.539003] br-lan: port 1(eth0.1) entered blocking state | |
[ 12.549811] br-lan: port 1(eth0.1) entered disabled state | |
[ 12.561172] device eth0.1 entered promiscuous mode | |
[ 12.570748] device eth0 entered promiscuous mode | |
[ 12.593473] br-lan: port 1(eth0.1) entered blocking state | |
[ 12.604276] br-lan: port 1(eth0.1) entered forwarding state | |
[ 12.615768] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready | |
[ 13.515126] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready | |
BusyBox v1.29.3 () built-in shell (ash) | |
_______ ________ __ | |
| |.-----.-----.-----.| | | |.----.| |_ | |
| - || _ | -__| || | | || _|| _| | |
|_______|| __|_____|__|__||________||__| |____| | |
|__| W I R E L E S S F R E E D O M | |
----------------------------------------------------- | |
OpenWrt SNAPSHOT, r8278-b134b3299c | |
----------------------------------------------------- | |
=== WARNING! ===================================== | |
There is no root password defined on this device! | |
Use the "passwd" command to set up a new password | |
in order to prevent unauthorized SSH logins. | |
-------------------------------------------------- |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Starting kernel ... | |
[ 0.000000] Linux version 4.14.74 (vk496@vk496-pc) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8222-6ef1c978ba)) #0 SMP Thu Oct 4 22:44:55 2018 | |
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.000000] MIPS: machine is Strong 1200 | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 08000000 @ 00000000 (usable) | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] VPE topology {2} total 2 | |
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] HighMem empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0 | |
[ 0.000000] percpu: Embedded 14 pages/cpu @81110000 s26192 r8192 d22960 u57344 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 | |
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 | |
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | |
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Writing ErrCtl register=00011586 | |
[ 0.000000] Readback ErrCtl register=00011586 | |
[ 0.000000] Memory: 123560K/131072K available (4428K kernel code, 231K rwdata, 988K rodata, 228K init, 276K bss, 7512K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS: 256 | |
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns | |
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns | |
[ 0.000011] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns | |
[ 0.015513] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) | |
[ 0.087814] pid_max: default: 32768 minimum: 301 | |
[ 0.097121] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.110136] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.125898] Hierarchical SRCU implementation. | |
[ 0.135212] smp: Bringing up secondary CPUs ... | |
[ 0.145278] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.145287] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.145300] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.145458] CPU1 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.204655] Synchronize counters for CPU 1: done. | |
[ 0.264336] smp: Brought up 1 node, 2 CPUs | |
[ 0.276125] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.295610] futex hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.307863] pinctrl core: initialized pinctrl subsystem | |
[ 0.319735] NET: Registered protocol family 16 | |
[ 0.341115] pull PCIe RST: RALINK_RSTCTRL = 0 | |
[ 0.650056] release PCIe RST: RALINK_RSTCTRL = 7000000 | |
[ 0.660121] ***** Xtal 40MHz ***** | |
[ 0.666850] release PCIe RST: RALINK_RSTCTRL = 7000000 | |
[ 0.677059] Port 0 N_FTS = 1b102800 | |
[ 0.683957] Port 1 N_FTS = 1b102800 | |
[ 0.690884] Port 2 N_FTS = 1b102800 | |
[ 1.849138] PCIE2 no card, disable it(RST&CLK) | |
[ 1.857826] -> 21007f2 | |
[ 1.862648] PCIE0 enabled | |
[ 1.867844] PCIE1 enabled | |
[ 1.873031] PCI host bridge /pcie@1e140000 ranges: | |
[ 1.882555] MEM 0x0000000060000000..0x000000006fffffff | |
[ 1.892910] IO 0x000000001e160000..0x000000001e16ffff | |
[ 1.903274] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000 | |
[ 1.930889] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.942306] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.953555] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.966315] PCI host bridge to bus 0000:00 | |
[ 1.974359] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] | |
[ 1.988033] pci_bus 0000:00: root bus resource [io 0xffffffff] | |
[ 1.999747] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] | |
[ 2.013229] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | |
[ 2.029936] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
[ 2.045762] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
[ 2.063204] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] | |
[ 2.076269] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] | |
[ 2.090056] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] | |
[ 2.103182] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] | |
[ 2.117016] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] | |
[ 2.130491] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] | |
[ 2.144830] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] | |
[ 2.158315] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] | |
[ 2.172650] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] | |
[ 2.186134] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] | |
[ 2.199627] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] | |
[ 2.214135] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] | |
[ 2.228470] pci 0000:00:00.0: PCI bridge to [bus 01] | |
[ 2.238301] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] | |
[ 2.251805] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] | |
[ 2.266151] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] | |
[ 2.280664] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] | |
[ 2.294993] pci 0000:00:01.0: PCI bridge to [bus 02] | |
[ 2.304829] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] | |
[ 2.318321] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] | |
[ 2.334366] clocksource: Switched to clocksource GIC | |
[ 2.345905] NET: Registered protocol family 2 | |
[ 2.355550] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 2.369317] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) | |
[ 2.381912] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 2.394654] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 2.406176] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 2.418834] NET: Registered protocol family 1 | |
[ 2.664319] 4 CPUs re-calibrate udelay(lpj = 2924544) | |
[ 2.675601] Crashlog allocated RAM at address 0x3f00000 | |
[ 2.686228] workingset: timestamp_bits=30 max_order=15 bucket_order=0 | |
[ 2.707917] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 2.719479] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 2.743186] io scheduler noop registered | |
[ 2.750912] io scheduler deadline registered (default) | |
[ 2.761567] gpio-export gpio_export: 1 gpio(s) exported | |
[ 2.772839] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
[ 2.787093] console [ttyS0] disabled | |
[ 2.794118] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A | |
[ 2.812117] console [ttyS0] enabled | |
[ 2.812117] console [ttyS0] enabled | |
[ 2.825876] bootconsole [early0] disabled | |
[ 2.825876] bootconsole [early0] disabled | |
[ 2.842559] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
[ 2.855661] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error | |
[ 2.869705] Enable NFI Clock | |
[ 2.884913] # MTK NAND # : Use HW ECC | |
[ 62.854331] INFO: rcu_sched self-detected stall on CPU | |
[ 62.864562] 0-...: (5999 ticks this GP) idle=6fe/140000000000001/0 softirq=26/26 fqs=2999 | |
[ 62.881161] (t=6000 jiffies g=-289 c=-290 q=146) | |
[ 62.890689] NMI backtrace for cpu 0 | |
[ 62.897621] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.74 #0 | |
[ 62.909558] Stack : 00000000 80560000 00000000 8006f6cc 80580000 80528520 00000000 00000000 | |
[ 62.926185] 804f49c8 87c09d44 87c3037c 805608a7 804efaf8 00000001 87c09ce8 532616ab | |
[ 62.942811] 00000000 00000000 805c0000 00003268 00000000 0000009e 00000007 00000000 | |
[ 62.959436] 00000000 80560000 000db255 00000000 00000000 00000000 80580000 00000000 | |
[ 62.976061] 805662a0 8055e0ac 000000e0 80560000 00000003 80287210 00000000 805c0000 | |
[ 62.992687] ... | |
[ 62.997544] Call Trace: | |
[ 63.002432] [<80010680>] show_stack+0x58/0x100 | |
[ 63.011278] [<80435a9c>] dump_stack+0x9c/0xe0 | |
[ 63.019955] [<8043c944>] nmi_cpu_backtrace+0xe4/0x108 | |
[ 63.029996] [<8043ca30>] nmi_trigger_cpumask_backtrace+0xc8/0x168 | |
[ 63.042121] [<80083fb8>] rcu_dump_cpu_stacks+0xc4/0x13c | |
[ 63.052507] [<80083414>] rcu_check_callbacks+0x310/0x814 | |
[ 63.063077] [<80086998>] update_process_times+0x34/0x7c | |
[ 63.073486] [<8009757c>] tick_handle_periodic+0x34/0xd0 | |
[ 63.083893] [<80307040>] gic_compare_interrupt+0x70/0x80 | |
[ 63.094459] [<80076e30>] handle_percpu_devid_irq+0xbc/0x1a8 | |
[ 63.105559] [<800711a0>] generic_handle_irq+0x40/0x58 | |
[ 63.115628] [<8023be5c>] gic_handle_local_int+0x9c/0xe8 | |
[ 63.126013] [<8023c01c>] gic_irq_dispatch+0x10/0x20 | |
[ 63.135709] [<800711a0>] generic_handle_irq+0x40/0x58 | |
[ 63.145765] [<80452d3c>] do_IRQ+0x1c/0x2c | |
[ 63.153730] [<8023afec>] plat_irq_dispatch+0xfc/0x138 | |
[ 63.163770] [<8000b5e8>] except_vec_vi_end+0xb8/0xc4 | |
[ 63.173650] [<802c8910>] mtk_nand_command_bp+0x34c/0x454 | |
[ 63.184211] [<802c9bec>] mtk_nand_probe+0x2b4/0xa64 | |
[ 63.193936] [<80297548>] platform_drv_probe+0x40/0x84 | |
[ 63.203977] [<80295a48>] really_probe+0x140/0x2b8 | |
[ 63.213326] [<80295c64>] __driver_attach+0xa4/0xdc | |
[ 63.222848] [<80293afc>] bus_for_each_dev+0x5c/0xbc | |
[ 63.232543] [<80294fb8>] bus_add_driver+0xf8/0x218 | |
[ 63.242065] [<80296530>] driver_register+0xac/0xfc | |
[ 63.251586] [<80005650>] do_one_initcall+0xd0/0x1a0 | |
[ 63.261287] [<80587d78>] kernel_init_freeable+0x168/0x228 | |
[ 63.272035] [<8044cdbc>] kernel_init+0x10/0x10c | |
[ 63.281039] [<8000b0d8>] ret_from_kernel_thread+0x14/0x1c |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Starting kernel ... | |
[ 0.000000] Linux version 4.14.74 (vk496@vk496-pc) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8222-6ef1c978ba)) #0 SMP Mon Oct 8 08:03:23 2018 | |
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.000000] MIPS: machine is Strong 1200 | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 08000000 @ 00000000 (usable) | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] VPE topology {2} total 2 | |
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] HighMem empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0 | |
[ 0.000000] percpu: Embedded 14 pages/cpu @81110000 s26192 r8192 d22960 u57344 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 | |
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 | |
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | |
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Writing ErrCtl register=00011580 | |
[ 0.000000] Readback ErrCtl register=00011580 | |
[ 0.000000] Memory: 123660K/131072K available (4367K kernel code, 216K rwdata, 972K rodata, 256K init, 241K bss, 7412K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS: 256 | |
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns | |
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns | |
[ 0.000011] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns | |
[ 0.015505] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) | |
[ 0.087798] pid_max: default: 32768 minimum: 301 | |
[ 0.097106] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.110119] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.125833] Hierarchical SRCU implementation. | |
[ 0.135135] smp: Bringing up secondary CPUs ... | |
[ 0.145197] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.145206] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.145218] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. | |
[ 0.145369] CPU1 revision is: 0001992f (MIPS 1004Kc) | |
[ 0.204574] Synchronize counters for CPU 1: done. | |
[ 0.264250] smp: Brought up 1 node, 2 CPUs | |
[ 0.276051] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.295528] futex hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.307772] pinctrl core: initialized pinctrl subsystem | |
[ 0.319629] NET: Registered protocol family 16 | |
[ 0.341357] pull PCIe RST: RALINK_RSTCTRL = 0 | |
[ 0.650271] release PCIe RST: RALINK_RSTCTRL = 7000000 | |
[ 0.660334] ***** Xtal 40MHz ***** | |
[ 0.667065] release PCIe RST: RALINK_RSTCTRL = 7000000 | |
[ 0.677274] Port 0 N_FTS = 1b105000 | |
[ 0.684171] Port 1 N_FTS = 1b105000 | |
[ 0.691098] Port 2 N_FTS = 1b102800 | |
[ 1.849295] PCIE2 no card, disable it(RST&CLK) | |
[ 1.857982] -> 21007f2 | |
[ 1.862805] PCIE0 enabled | |
[ 1.867999] PCIE1 enabled | |
[ 1.873185] PCI host bridge /pcie@1e140000 ranges: | |
[ 1.882710] MEM 0x0000000060000000..0x000000006fffffff | |
[ 1.893066] IO 0x000000001e160000..0x000000001e16ffff | |
[ 1.903429] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000 | |
[ 1.930710] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.942087] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.953407] mt7621_gpio 1e000600.gpio: registering 32 gpios | |
[ 1.966149] PCI host bridge to bus 0000:00 | |
[ 1.974192] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] | |
[ 1.987872] pci_bus 0000:00: root bus resource [io 0xffffffff] | |
[ 1.999580] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] | |
[ 2.013053] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | |
[ 2.031330] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] | |
[ 2.044398] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] | |
[ 2.058186] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] | |
[ 2.071307] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] | |
[ 2.085133] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] | |
[ 2.098618] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] | |
[ 2.112957] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] | |
[ 2.126436] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] | |
[ 2.140779] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] | |
[ 2.154258] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] | |
[ 2.167749] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] | |
[ 2.182260] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] | |
[ 2.196588] pci 0000:00:00.0: PCI bridge to [bus 01] | |
[ 2.206428] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] | |
[ 2.219917] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] | |
[ 2.234268] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] | |
[ 2.248785] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] | |
[ 2.263118] pci 0000:00:01.0: PCI bridge to [bus 02] | |
[ 2.272949] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] | |
[ 2.286445] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] | |
[ 2.302809] clocksource: Switched to clocksource GIC | |
[ 2.314281] NET: Registered protocol family 2 | |
[ 2.323920] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 2.337676] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) | |
[ 2.350280] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 2.363004] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 2.374523] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 2.387179] NET: Registered protocol family 1 | |
[ 2.632751] 4 CPUs re-calibrate udelay(lpj = 2924544) | |
[ 2.644043] Crashlog allocated RAM at address 0x3f00000 | |
[ 2.654527] workingset: timestamp_bits=30 max_order=15 bucket_order=0 | |
[ 2.676679] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 2.688192] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 2.711561] io scheduler noop registered | |
[ 2.719381] io scheduler deadline registered (default) | |
[ 2.730594] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
[ 2.744775] console [ttyS0] disabled | |
[ 2.751788] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A | |
[ 2.769851] console [ttyS0] enabled | |
[ 2.769851] console [ttyS0] enabled | |
[ 2.783562] bootconsole [early0] disabled | |
[ 2.783562] bootconsole [early0] disabled | |
[ 2.800809] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
[ 2.814339] spi-mt7621 1e000b00.spi: sys_freq: 50000000 | |
[ 2.825912] m25p80 spi0.0: mx25l12805d (16384 Kbytes) | |
[ 2.836058] 5 fixed-partitions partitions found on MTD device spi0.0 | |
[ 2.848702] Creating 5 MTD partitions on "spi0.0": | |
[ 2.858249] 0x000000000000-0x000000030000 : "Bootloader" | |
[ 2.870083] 0x000000030000-0x000000040000 : "Config" | |
[ 2.881157] 0x000000040000-0x000000050000 : "Factory" | |
[ 2.892408] 0x000000050000-0x000000ff0000 : "firmware" | |
[ 2.905907] random: fast init done | |
[ 2.940002] 2 uimage-fw partitions found on MTD device firmware | |
[ 2.951806] 0x000000050000-0x0000002146fc : "kernel" | |
[ 2.963022] 0x0000002146fc-0x000000ff0000 : "rootfs" | |
[ 2.974055] mtd: device 5 (rootfs) set to be root filesystem | |
[ 2.985475] 1 squashfs-split partitions found on MTD device rootfs | |
[ 2.997805] 0x0000004d0000-0x000000ff0000 : "rootfs_data" | |
[ 3.009731] 0x000000ff0000-0x000001000000 : "Second_Config" | |
[ 3.022838] libphy: Fixed MDIO Bus: probed | |
[ 3.094853] libphy: mdio: probed | |
[ 4.501780] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver | |
[ 4.514390] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 17 | |
[ 4.534042] NET: Registered protocol family 10 | |
[ 4.544409] Segment Routing with IPv6 | |
[ 4.551773] NET: Registered protocol family 17 | |
[ 4.560680] 8021q: 802.1Q VLAN Support v1.8 | |
[ 4.572023] hctosys: unable to open rtc device (rtc0) | |
[ 4.588739] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. | |
[ 4.603677] Freeing unused kernel memory: 256K | |
[ 4.612526] This architecture does not have kernel memory protection. | |
[ 5.065323] random: crng init done | |
[ 5.266873] init: Console is alive | |
[ 5.274002] init: - watchdog - | |
[ 6.287903] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
[ 6.422051] usbcore: registered new interface driver usbfs | |
[ 6.433171] usbcore: registered new interface driver hub | |
[ 6.443923] usbcore: registered new device driver usb | |
[ 6.463167] SCSI subsystem initialized | |
[ 6.482084] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator | |
[ 6.499440] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator | |
[ 6.517135] xhci-mtk 1e1c0000.xhci: xHCI Host Controller | |
[ 6.527755] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 | |
[ 6.553055] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010 | |
[ 6.570006] xhci-mtk 1e1c0000.xhci: irq 16, io mem 0x1e1c0000 | |
[ 6.582646] hub 1-0:1.0: USB hub found | |
[ 6.590261] hub 1-0:1.0: 2 ports detected | |
[ 6.598915] xhci-mtk 1e1c0000.xhci: xHCI Host Controller | |
[ 6.609603] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 | |
[ 6.624563] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed | |
[ 6.637601] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 6.654722] hub 2-0:1.0: USB hub found | |
[ 6.662250] hub 2-0:1.0: 1 port detected | |
[ 6.676263] usbcore: registered new interface driver usb-storage | |
[ 6.688618] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
[ 6.723235] init: - preinit - | |
[ 7.212334] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up | |
[ 7.571267] mtk_soc_eth 1e100000.ethernet: PPE started | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
[ 10.800233] mount_root: jffs2 not ready yet, using temporary tmpfs overlay | |
[ 10.831335] urandom-seed: Seed file not found (/etc/urandom.seed) | |
[ 10.920922] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818 | |
[ 10.943437] procd: - early - | |
[ 10.949274] procd: - watchdog - | |
[ 11.632993] procd: - watchdog - | |
[ 11.639566] procd: - ubus - | |
[ 11.725203] procd: - init - | |
Please press Enter to activate this console. | |
[ 11.987057] kmodloader: loading kernel modules from /etc/modules.d/* | |
[ 12.012603] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 12.034042] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85 | |
[ 12.049365] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd | |
[ 12.064876] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 12.082436] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) | |
[ 12.136540] xt_time: kernel timezone is -0000 | |
[ 12.199806] bus=0x1, slot = 0x0, irq=0xff | |
[ 12.208175] mt76x2e 0000:01:00.0: ASIC revision: 76120044 | |
[ 12.873525] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a | |
[ 12.889548] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 | |
[ 12.900532] mt76x2e 0000:01:00.0: Build: 1 | |
[ 12.908722] mt76x2e 0000:01:00.0: Build Time: 201507311614____ | |
[ 12.942814] mt76x2e 0000:01:00.0: Firmware running! | |
[ 12.959116] bus=0x2, slot = 0x1, irq=0xff | |
[ 12.967477] mt76x2e 0000:02:00.0: ASIC revision: 76020044 | |
[ 13.632850] mt76x2e 0000:02:00.0: ROM patch already applied | |
[ 13.644943] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00 | |
[ 13.655946] mt76x2e 0000:02:00.0: Build: 1 | |
[ 13.664131] mt76x2e 0000:02:00.0: Build Time: 201507311614____ | |
[ 13.692816] mt76x2e 0000:02:00.0: Firmware running! | |
[ 13.716092] PPP generic driver version 2.4.2 | |
[ 13.727277] NET: Registered protocol family 24 | |
[ 13.740525] kmodloader: done loading kernel modules from /etc/modules.d/* | |
[ 18.930411] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 | |
[ 18.962905] jffs2_build_filesystem(): unlocking the mtd device... | |
[ 18.962922] done. | |
[ 18.979064] jffs2_build_filesystem(): erasing all blocks after the end marker... | |
[ 20.836846] mtk_soc_eth 1e100000.ethernet: PPE started | |
[ 20.941506] br-lan: port 1(eth0.1) entered blocking state | |
[ 20.952417] br-lan: port 1(eth0.1) entered disabled state | |
[ 20.963807] device eth0.1 entered promiscuous mode | |
[ 20.973427] device eth0 entered promiscuous mode | |
[ 21.024983] br-lan: port 1(eth0.1) entered blocking state | |
[ 21.035771] br-lan: port 1(eth0.1) entered forwarding state | |
[ 21.047163] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready | |
[ 21.873345] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment