- Click services -> USB -> Enable "Core USB Support" apply settings
- Click Administration -> Commands & paste the following into the "Command Shell" input box http://192.168.1.1/Diagnostics.asp :
insmod usbnet
insmod cdc_ether
usb_modeswitch -J -v 0x12d1 -p 0x1f01
sleep 20
udhcpc -i eth3
After you paste the above, click "Save Startup".
-
Click Services -> Services & Scroll to the bottom of the page and click 'Reboot Router' wait for roughly 30 seconds. Once the router has rebooted & your're back into the interface there will be another 20 second delay for the IP to be obtained from the 4g modem and you will see "WAN IP: 192.168.8.100" in the top right of the interface.
-
Click on Setup -> Networking & Scroll down to "Port Setup" and under WAN Post Assignment change this to
eth3
& then apply settings. http://192.168.1.1/Networking.asp