taylor-jones · August 3, 2020 06:20
diff --git a/uncrustify.cfg b/uncrustify.cfg
 # Uncrustify 0.61
 #
 # uncrustify config file
 #

 #newlines                                  { Auto, LF, CR, CRLF }
 #  The type of line endings

 input_tab_size                          = 4
 #  The original size of tabs in the input

 output_tab_size                         = 2
 #  The size of tabs in the output (only used if align_with_tabs=true)

 #string_escape_char                        Number
 #  The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)

 #string_escape_char2                       Number
 #  Alternate string escape char for Pawn. Only works right before the quote char.

 #string_replace_tab_chars                  { False, True }
 #  Replace tab characters found in string literals with the escape sequence \t instead.

 #tok_split_gte                             { False, True }
 #  Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
 #  If true (default), 'assert(x<0 && y>=3)' will be broken.
 #  Improvements to template detection may make this option obsolete.

 #disable_processing_cmt                    String
 #  Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.

 #enable_processing_cmt                     String
 #  Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.

 #enable_digraphs                           { False, True }
 #  Enable parsing of digraphs. Default=false

 #utf8_bom                                  { Ignore, Add, Remove, Force }
 #  Control what to do with the UTF-8 BOM (recommend 'remove')

 #utf8_byte                                 { False, True }
 #  If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8

 #utf8_force                                { False, True }
 #  Force the output encoding to UTF-8

 #
 # Indenting
 #

 indent_columns                          = output_tab_size
 #  The number of columns to indent per level.
 #  Usually 2, 3, 4, or 8.

 #indent_continue                           Number
 #  The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
 #  For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level

 indent_with_tabs                        = 0
 #  How to use tabs when indenting code
 #  0=spaces only
 #  1=indent with tabs to brace level, align with spaces
 #  2=indent and align with tabs, using spaces when not on a tabstop

 #indent_cmt_with_tabs                      { False, True }
 #  Comments that are not a brace level are indented with tabs on a tabstop.
 #  Requires indent_with_tabs=2. If false, will use spaces.

 #indent_align_string                       { False, True }
 #  Whether to indent strings broken by '\' so that they line up

 #indent_xml_string                         Number
 #  The number of spaces to indent multi-line XML strings.
 #  Requires indent_align_string=True

 #indent_brace                              Number
 #  Spaces to indent '{' from level

 #indent_braces                             { False, True }
 #  Whether braces are indented to the body level

 #indent_braces_no_func                     { False, True }
 #  Disabled indenting function braces if indent_braces is true

 #indent_braces_no_class                    { False, True }
 #  Disabled indenting class braces if indent_braces is true

 #indent_braces_no_struct                   { False, True }
 #  Disabled indenting struct braces if indent_braces is true

 #indent_brace_parent                       { False, True }
 #  Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.

 #indent_paren_open_brace                   { False, True }
 #  Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.

 indent_namespace                        = true
 #  Whether the 'namespace' body is indented

 #indent_namespace_single_indent            { False, True }
 #  Only indent one namespace and no sub-namespaces.
 #  Requires indent_namespace=true.

 #indent_namespace_level                    Number
 #  The number of spaces to indent a namespace block

 #indent_namespace_limit                    Number
 #  If the body of the namespace is longer than this number, it won't be indented.
 #  Requires indent_namespace=true. Default=0 (no limit)

 #indent_extern                             { False, True }
 #  Whether the 'extern "C"' body is indented

 indent_class                            = true
 #  Whether the 'class' body is indented

 indent_class_colon                      = true
 #  Whether to indent the stuff after a leading base class colon

 indent_class_on_colon                   = true
 #  Indent based on a class colon instead of the stuff after the colon.
 #  Requires indent_class_colon=true. Default=false

 #indent_constr_colon                       { False, True }
 #  Whether to indent the stuff after a leading class initializer colon

 #indent_ctor_init_leading                  Number
 #  Virtual indent from the ':' for member initializers. Default is 2

 #indent_ctor_init                          Number
 #  Additional indenting for constructor initializer list

 #indent_else_if                            { False, True }
 #  False=treat 'else\nif' as 'else if' for indenting purposes
 #  True=indent the 'if' one level
 #  

 #indent_var_def_blk                        Number
 #  Amount to indent variable declarations after a open brace. neg=relative, pos=absolute

 #indent_var_def_cont                       { False, True }
 #  Indent continued variable declarations instead of aligning.

 #indent_shift                              { False, True }
 #  Indent continued shift expressions ('<<' and '>>') instead of aligning.
 #  Turn align_left_shift off when enabling this.

 #indent_func_def_force_col1                { False, True }
 #  True:  force indentation of function definition to start in column 1
 #  False: use the default behavior

 #indent_func_call_param                    { False, True }
 #  True:  indent continued function call parameters one indent level
 #  False: align parameters under the open paren

 #indent_func_def_param                     { False, True }
 #  Same as indent_func_call_param, but for function defs

 #indent_func_proto_param                   { False, True }
 #  Same as indent_func_call_param, but for function protos

 #indent_func_class_param                   { False, True }
 #  Same as indent_func_call_param, but for class declarations

 #indent_func_ctor_var_param                { False, True }
 #  Same as indent_func_call_param, but for class variable constructors

 #indent_template_param                     { False, True }
 #  Same as indent_func_call_param, but for templates

 #indent_func_param_double                  { False, True }
 #  Double the indent for indent_func_xxx_param options

 #indent_func_const                         Number
 #  Indentation column for standalone 'const' function decl/proto qualifier

 #indent_func_throw                         Number
 #  Indentation column for standalone 'throw' function decl/proto qualifier

 #indent_member                             Number
 #  The number of spaces to indent a continued '->' or '.'
 #  Usually set to 0, 1, or indent_columns.

 #indent_sing_line_comments                 Number
 #  Spaces to indent single line ('//') comments on lines before code

 indent_relative_single_line_comments    = true
 #  If set, will indent trailing single line ('//') comments relative
 #  to the code instead of trying to keep the same absolute column

 #indent_switch_case                        Number
 #  Spaces to indent 'case' from 'switch'
 #  Usually 0 or indent_columns.

 #indent_case_shift                         Number
 #  Spaces to shift the 'case' line, without affecting any other lines
 #  Usually 0.

 #indent_case_brace                         Number
 #  Spaces to indent '{' from 'case'.
 #  By default, the brace will appear under the 'c' in case.
 #  Usually set to 0 or indent_columns.

 #indent_col1_comment                       { False, True }
 #  Whether to indent comments found in first column

 #indent_label                              Number
 #  How to indent goto labels
 #   >0 : absolute column where 1 is the leftmost column
 #   <=0 : subtract from brace indent

 indent_access_spec                      = 2
 #  Same as indent_label, but for access specifiers that are followed by a colon

 #indent_access_spec_body                   { False, True }
 #  Indent the code after an access specifier by one level.
 #  If set, this option forces 'indent_access_spec=0'

 #indent_paren_nl                           { False, True }
 #  If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)

 #indent_paren_close                        Number
 #  Controls the indent of a close paren after a newline.
 #  0: Indent to body level
 #  1: Align under the open paren
 #  2: Indent to the brace level

 #indent_comma_paren                        { False, True }
 #  Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren

 #indent_bool_paren                         { False, True }
 #  Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren

 #indent_first_bool_expr                    { False, True }
 #  If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones

 #indent_square_nl                          { False, True }
 #  If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)

 #indent_preserve_sql                       { False, True }
 #  Don't change the relative indent of ESQL/C 'EXEC SQL' bodies

 #indent_align_assign                       { False, True }
 #  Align continued statements at the '='. Default=True
 #  If FALSE or the '=' is followed by a newline, the next line is indent one tab.

 #indent_oc_block                           { False, True }
 #  Indent OC blocks at brace level instead of usual rules.

 #indent_oc_block_msg                       Number
 #  Indent OC blocks in a message relative to the parameter name.
 #  0=use indent_oc_block rules, 1+=spaces to indent

 #indent_oc_msg_colon                       Number
 #  Minimum indent for subsequent parameters

 #indent_oc_msg_prioritize_first_colon      { False, True }
 #  If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
 #  Default is true.

 #indent_oc_block_msg_xcode_style           { False, True }
 #  If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).

 #indent_oc_block_msg_from_keyword          { False, True }
 #  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.

 #indent_oc_block_msg_from_colon            { False, True }
 #  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.

 #indent_oc_block_msg_from_caret            { False, True }
 #  If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.

 #indent_oc_block_msg_from_brace            { False, True }
 #  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.

 #indent_min_vbrace_open                    Number
 #  When identing after virtual brace open and newline add further spaces to reach this min. indent.

 #indent_vbrace_open_on_tabstop             { False, True }
 #  TRUE: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.

 #
 # Spacing options
 #

 sp_arith                                = force
 #  Add or remove space around arithmetic operator '+', '-', '/', '*', etc

 sp_assign                               = force
 #  Add or remove space around assignment operator '=', '+=', etc

 #sp_cpp_lambda_assign                      { Ignore, Add, Remove, Force }
 #  Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign

 #sp_cpp_lambda_paren                       { Ignore, Add, Remove, Force }
 #  Add or remove space after the capture specification in C++11 lambda.

 #sp_assign_default                         { Ignore, Add, Remove, Force }
 #  Add or remove space around assignment operator '=' in a prototype

 #sp_before_assign                          { Ignore, Add, Remove, Force }
 #  Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.

 #sp_after_assign                           { Ignore, Add, Remove, Force }
 #  Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.

 #sp_enum_paren                             { Ignore, Add, Remove, Force }
 #  Add or remove space in 'NS_ENUM ('

 #sp_enum_assign                            { Ignore, Add, Remove, Force }
 #  Add or remove space around assignment '=' in enum

 #sp_enum_before_assign                     { Ignore, Add, Remove, Force }
 #  Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.

 #sp_enum_after_assign                      { Ignore, Add, Remove, Force }
 #  Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.

 #sp_pp_concat                              { Ignore, Add, Remove, Force }
 #  Add or remove space around preprocessor '##' concatenation operator. Default=Add

 #sp_pp_stringify                           { Ignore, Add, Remove, Force }
 #  Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.

 #sp_before_pp_stringify                    { Ignore, Add, Remove, Force }
 #  Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.

 sp_bool                                 = force
 #  Add or remove space around boolean operators '&&' and '||'

 sp_compare                              = force
 #  Add or remove space around compare operator '<', '>', '==', etc

 #sp_inside_paren                           { Ignore, Add, Remove, Force }
 #  Add or remove space inside '(' and ')'

 #sp_paren_paren                            { Ignore, Add, Remove, Force }
 #  Add or remove space between nested parens: '((' vs ') )'

 #sp_cparen_oparen                          { Ignore, Add, Remove, Force }
 #  Add or remove space between back-to-back parens: ')(' vs ') ('

 #sp_balance_nested_parens                  { False, True }
 #  Whether to balance spaces inside nested parens

 #sp_paren_brace                            { Ignore, Add, Remove, Force }
 #  Add or remove space between ')' and '{'

 #sp_before_ptr_star                        { Ignore, Add, Remove, Force }
 #  Add or remove space before pointer star '*'

 #sp_before_unnamed_ptr_star                { Ignore, Add, Remove, Force }
 #  Add or remove space before pointer star '*' that isn't followed by a variable name
 #  If set to 'ignore', sp_before_ptr_star is used instead.

 #sp_between_ptr_star                       { Ignore, Add, Remove, Force }
 #  Add or remove space between pointer stars '*'

 #sp_after_ptr_star                         { Ignore, Add, Remove, Force }
 #  Add or remove space after pointer star '*', if followed by a word.

 #sp_after_ptr_star_qualifier               { Ignore, Add, Remove, Force }
 #  Add or remove space after pointer star '*', if followed by a qualifier.

 #sp_after_ptr_star_func                    { Ignore, Add, Remove, Force }
 #  Add or remove space after a pointer star '*', if followed by a func proto/def.

 #sp_ptr_star_paren                         { Ignore, Add, Remove, Force }
 #  Add or remove space after a pointer star '*', if followed by an open paren (function types).

 #sp_before_ptr_star_func                   { Ignore, Add, Remove, Force }
 #  Add or remove space before a pointer star '*', if followed by a func proto/def.

 #sp_before_byref                           { Ignore, Add, Remove, Force }
 #  Add or remove space before a reference sign '&'

 #sp_before_unnamed_byref                   { Ignore, Add, Remove, Force }
 #  Add or remove space before a reference sign '&' that isn't followed by a variable name
 #  If set to 'ignore', sp_before_byref is used instead.

 #sp_after_byref                            { Ignore, Add, Remove, Force }
 #  Add or remove space after reference sign '&', if followed by a word.

 #sp_after_byref_func                       { Ignore, Add, Remove, Force }
 #  Add or remove space after a reference sign '&', if followed by a func proto/def.

 #sp_before_byref_func                      { Ignore, Add, Remove, Force }
 #  Add or remove space before a reference sign '&', if followed by a func proto/def.

 #sp_after_type                             { Ignore, Add, Remove, Force }
 #  Add or remove space between type and word. Default=Force

 #sp_before_template_paren                  { Ignore, Add, Remove, Force }
 #  Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.

 #sp_template_angle                         { Ignore, Add, Remove, Force }
 #  Add or remove space in 'template <' vs 'template<'.
 #  If set to ignore, sp_before_angle is used.

 #sp_before_angle                           { Ignore, Add, Remove, Force }
 #  Add or remove space before '<>'

 #sp_inside_angle                           { Ignore, Add, Remove, Force }
 #  Add or remove space inside '<' and '>'

 #sp_after_angle                            { Ignore, Add, Remove, Force }
 #  Add or remove space after '<>'

 #sp_angle_paren                            { Ignore, Add, Remove, Force }
 #  Add or remove space between '<>' and '(' as found in 'new List<byte>();'

 #sp_angle_word                             { Ignore, Add, Remove, Force }
 #  Add or remove space between '<>' and a word as in 'List<byte> m;'

 #sp_angle_shift                            { Ignore, Add, Remove, Force }
 #  Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add

 #sp_permit_cpp11_shift                     { False, True }
 #  Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
 #  sp_angle_shift cannot remove the space without this option.

 sp_before_sparen                        = force
 #  Add or remove space before '(' of 'if', 'for', 'switch', and 'while'

 #sp_inside_sparen                          { Ignore, Add, Remove, Force }
 #  Add or remove space inside if-condition '(' and ')'

 #sp_inside_sparen_close                    { Ignore, Add, Remove, Force }
 #  Add or remove space before if-condition ')'. Overrides sp_inside_sparen.

 #sp_inside_sparen_open                     { Ignore, Add, Remove, Force }
 #  Add or remove space after if-condition '('. Overrides sp_inside_sparen.

 sp_after_sparen                         = force
 #  Add or remove space after ')' of 'if', 'for', 'switch', and 'while'

 sp_sparen_brace                         = force
 #  Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'

 #sp_invariant_paren                        { Ignore, Add, Remove, Force }
 #  Add or remove space between 'invariant' and '(' in the D language.

 #sp_after_invariant_paren                  { Ignore, Add, Remove, Force }
 #  Add or remove space after the ')' in 'invariant (C) c' in the D language.

 #sp_special_semi                           { Ignore, Add, Remove, Force }
 #  Add or remove space before empty statement ';' on 'if', 'for' and 'while'

 #sp_before_semi                            { Ignore, Add, Remove, Force }
 #  Add or remove space before ';'. Default=Remove

 #sp_before_semi_for                      = force
 #  Add or remove space before ';' in non-empty 'for' statements

 #sp_before_semi_for_empty                  { Ignore, Add, Remove, Force }
 #  Add or remove space before a semicolon of an empty part of a for statement.

 #sp_after_semi                             { Ignore, Add, Remove, Force }
 #  Add or remove space after ';', except when followed by a comment. Default=Add

 sp_after_semi_for                       = force
 #  Add or remove space after ';' in non-empty 'for' statements. Default=Force

 #sp_after_semi_for_empty                   { Ignore, Add, Remove, Force }
 #  Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).

 #sp_before_square                          { Ignore, Add, Remove, Force }
 #  Add or remove space before '[' (except '[]')

 #sp_before_squares                         { Ignore, Add, Remove, Force }
 #  Add or remove space before '[]'

 #sp_inside_square                          { Ignore, Add, Remove, Force }
 #  Add or remove space inside a non-empty '[' and ']'

 sp_after_comma                          = force
 #  Add or remove space after ','

 #sp_before_comma                           { Ignore, Add, Remove, Force }
 #  Add or remove space before ','

 #sp_after_mdatype_commas                   { Ignore, Add, Remove, Force }
 #  Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'

 #sp_before_mdatype_commas                  { Ignore, Add, Remove, Force }
 #  Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'

 #sp_between_mdatype_commas                 { Ignore, Add, Remove, Force }
 #  Add or remove space between ',' in multidimensional array type 'int[,,]'

 #sp_paren_comma                            { Ignore, Add, Remove, Force }
 #  Add or remove space between an open paren and comma: '(,' vs '( ,'
 #  

 #sp_before_ellipsis                        { Ignore, Add, Remove, Force }
 #  Add or remove space before the variadic '...' when preceded by a non-punctuator

 #sp_after_class_colon                      { Ignore, Add, Remove, Force }
 #  Add or remove space after class ':'

 #sp_before_class_colon                     { Ignore, Add, Remove, Force }
 #  Add or remove space before class ':'

 #sp_after_constr_colon                     { Ignore, Add, Remove, Force }
 #  Add or remove space after class constructor ':'

 #sp_before_constr_colon                    { Ignore, Add, Remove, Force }
 #  Add or remove space before class constructor ':'

 #sp_before_case_colon                      { Ignore, Add, Remove, Force }
 #  Add or remove space before case ':'. Default=Remove

 #sp_after_operator                         { Ignore, Add, Remove, Force }
 #  Add or remove space between 'operator' and operator sign

 #sp_after_operator_sym                     { Ignore, Add, Remove, Force }
 #  Add or remove space between the operator symbol and the open paren, as in 'operator ++('

 sp_after_cast                           = remove
 #  Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'

 #sp_inside_paren_cast                      { Ignore, Add, Remove, Force }
 #  Add or remove spaces inside cast parens

 #sp_cpp_cast_paren                         { Ignore, Add, Remove, Force }
 #  Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'

 sp_sizeof_paren                         = remove
 #  Add or remove space between 'sizeof' and '('

 #sp_after_tag                              { Ignore, Add, Remove, Force }
 #  Add or remove space after the tag keyword (Pawn)

 sp_inside_braces_enum                   = force
 #  Add or remove space inside enum '{' and '}'

 sp_inside_braces_struct                 = force
 #  Add or remove space inside struct/union '{' and '}'

 sp_inside_braces                        = force
 #  Add or remove space inside '{' and '}'

 #sp_inside_braces_empty                    { Ignore, Add, Remove, Force }
 #  Add or remove space inside '{}'

 #sp_type_func                              { Ignore, Add, Remove, Force }
 #  Add or remove space between return type and function name
 #  A minimum of 1 is forced except for pointer return types.

 sp_func_proto_paren                     = remove
 #  Add or remove space between function name and '(' on function declaration

 sp_func_def_paren                       = remove
 #  Add or remove space between function name and '(' on function definition

 #sp_inside_fparens                         { Ignore, Add, Remove, Force }
 #  Add or remove space inside empty function '()'

 #sp_inside_fparen                          { Ignore, Add, Remove, Force }
 #  Add or remove space inside function '(' and ')'

 #sp_inside_tparen                          { Ignore, Add, Remove, Force }
 #  Add or remove space inside the first parens in the function type: 'void (*x)(...)'

 #sp_after_tparen_close                     { Ignore, Add, Remove, Force }
 #  Add or remove between the parens in the function type: 'void (*x)(...)'

 #sp_square_fparen                          { Ignore, Add, Remove, Force }
 #  Add or remove space between ']' and '(' when part of a function call.

 sp_fparen_brace                         = force
 #  Add or remove space between ')' and '{' of function

 #sp_fparen_dbrace                          { Ignore, Add, Remove, Force }
 #  Java: Add or remove space between ')' and '{{' of double brace initializer.

 sp_func_call_paren                      = remove
 #  Add or remove space between function name and '(' on function calls

 #sp_func_call_paren_empty                  { Ignore, Add, Remove, Force }
 #  Add or remove space between function name and '()' on function calls without parameters.
 #  If set to 'ignore' (the default), sp_func_call_paren is used.

 #sp_func_call_user_paren                   { Ignore, Add, Remove, Force }
 #  Add or remove space between the user function name and '(' on function calls
 #  You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.

 #sp_func_class_paren                       { Ignore, Add, Remove, Force }
 #  Add or remove space between a constructor/destructor and the open paren

 sp_return_paren                         = force
 #  Add or remove space between 'return' and '('

 #sp_attribute_paren                        { Ignore, Add, Remove, Force }
 #  Add or remove space between '__attribute__' and '('

 #sp_defined_paren                          { Ignore, Add, Remove, Force }
 #  Add or remove space between 'defined' and '(' in '#if defined (FOO)'

 #sp_throw_paren                            { Ignore, Add, Remove, Force }
 #  Add or remove space between 'throw' and '(' in 'throw (something)'

 #sp_after_throw                            { Ignore, Add, Remove, Force }
 #  Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'

 #sp_catch_paren                            { Ignore, Add, Remove, Force }
 #  Add or remove space between 'catch' and '(' in 'catch (something) { }'
 #  If set to ignore, sp_before_sparen is used.

 #sp_version_paren                          { Ignore, Add, Remove, Force }
 #  Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
 #  If set to ignore, sp_before_sparen is used.

 #sp_scope_paren                            { Ignore, Add, Remove, Force }
 #  Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
 #  If set to ignore, sp_before_sparen is used.

 #sp_macro                                  { Ignore, Add, Remove, Force }
 #  Add or remove space between macro and value

 #sp_macro_func                             { Ignore, Add, Remove, Force }
 #  Add or remove space between macro function ')' and value

 sp_else_brace                           = force
 #  Add or remove space between 'else' and '{' if on the same line

 sp_brace_else                           = force
 #  Add or remove space between '}' and 'else' if on the same line

 #sp_brace_typedef                          { Ignore, Add, Remove, Force }
 #  Add or remove space between '}' and the name of a typedef on the same line

 #sp_catch_brace                            { Ignore, Add, Remove, Force }
 #  Add or remove space between 'catch' and '{' if on the same line

 #sp_brace_catch                            { Ignore, Add, Remove, Force }
 #  Add or remove space between '}' and 'catch' if on the same line

 #sp_finally_brace                          { Ignore, Add, Remove, Force }
 #  Add or remove space between 'finally' and '{' if on the same line

 #sp_brace_finally                          { Ignore, Add, Remove, Force }
 #  Add or remove space between '}' and 'finally' if on the same line

 #sp_try_brace                              { Ignore, Add, Remove, Force }
 #  Add or remove space between 'try' and '{' if on the same line

 #sp_getset_brace                           { Ignore, Add, Remove, Force }
 #  Add or remove space between get/set and '{' if on the same line

 #sp_word_brace                             { Ignore, Add, Remove, Force }
 #  Add or remove space between a variable and '{' for C++ uniform initialization

 #sp_word_brace_ns                          { Ignore, Add, Remove, Force }
 #  Add or remove space between a variable and '{' for a namespace

 #sp_before_dc                              { Ignore, Add, Remove, Force }
 #  Add or remove space before the '::' operator

 #sp_after_dc                               { Ignore, Add, Remove, Force }
 #  Add or remove space after the '::' operator

 #sp_d_array_colon                          { Ignore, Add, Remove, Force }
 #  Add or remove around the D named array initializer ':' operator

 #sp_not                                    { Ignore, Add, Remove, Force }
 #  Add or remove space after the '!' (not) operator. Default=Remove

 #sp_inv                                    { Ignore, Add, Remove, Force }
 #  Add or remove space after the '~' (invert) operator. Default=Remove

 #sp_addr                                   { Ignore, Add, Remove, Force }
 #  Add or remove space after the '&' (address-of) operator. Default=Remove
 #  This does not affect the spacing after a '&' that is part of a type.

 #sp_member                                 { Ignore, Add, Remove, Force }
 #  Add or remove space around the '.' or '->' operators. Default=Remove

 #sp_deref                                  { Ignore, Add, Remove, Force }
 #  Add or remove space after the '*' (dereference) operator. Default=Remove
 #  This does not affect the spacing after a '*' that is part of a type.

 #sp_sign                                   { Ignore, Add, Remove, Force }
 #  Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove

 #sp_incdec                                 { Ignore, Add, Remove, Force }
 #  Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove

 #sp_before_nl_cont                         { Ignore, Add, Remove, Force }
 #  Add or remove space before a backslash-newline at the end of a line. Default=Add

 #sp_after_oc_scope                         { Ignore, Add, Remove, Force }
 #  Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'

 #sp_after_oc_colon                         { Ignore, Add, Remove, Force }
 #  Add or remove space after the colon in message specs
 #  '-(int) f:(int) x;' vs '-(int) f: (int) x;'

 #sp_before_oc_colon                        { Ignore, Add, Remove, Force }
 #  Add or remove space before the colon in message specs
 #  '-(int) f: (int) x;' vs '-(int) f : (int) x;'

 #sp_after_oc_dict_colon                    { Ignore, Add, Remove, Force }
 #  Add or remove space after the colon in immutable dictionary expression
 #  'NSDictionary *test = @{@"foo" :@"bar"};'

 #sp_before_oc_dict_colon                   { Ignore, Add, Remove, Force }
 #  Add or remove space before the colon in immutable dictionary expression
 #  'NSDictionary *test = @{@"foo" :@"bar"};'

 #sp_after_send_oc_colon                    { Ignore, Add, Remove, Force }
 #  Add or remove space after the colon in message specs
 #  '[object setValue:1];' vs '[object setValue: 1];'

 #sp_before_send_oc_colon                   { Ignore, Add, Remove, Force }
 #  Add or remove space before the colon in message specs
 #  '[object setValue:1];' vs '[object setValue :1];'

 #sp_after_oc_type                          { Ignore, Add, Remove, Force }
 #  Add or remove space after the (type) in message specs
 #  '-(int)f: (int) x;' vs '-(int)f: (int)x;'

 #sp_after_oc_return_type                   { Ignore, Add, Remove, Force }
 #  Add or remove space after the first (type) in message specs
 #  '-(int) f:(int)x;' vs '-(int)f:(int)x;'

 #sp_after_oc_at_sel                        { Ignore, Add, Remove, Force }
 #  Add or remove space between '@selector' and '('
 #  '@selector(msgName)' vs '@selector (msgName)'
 #  Also applies to @protocol() constructs

 #sp_after_oc_at_sel_parens                 { Ignore, Add, Remove, Force }
 #  Add or remove space between '@selector(x)' and the following word
 #  '@selector(foo) a:' vs '@selector(foo)a:'

 #sp_inside_oc_at_sel_parens                { Ignore, Add, Remove, Force }
 #  Add or remove space inside '@selector' parens
 #  '@selector(foo)' vs '@selector( foo )'
 #  Also applies to @protocol() constructs

 #sp_before_oc_block_caret                  { Ignore, Add, Remove, Force }
 #  Add or remove space before a block pointer caret
 #  '^int (int arg){...}' vs. ' ^int (int arg){...}'

 #sp_after_oc_block_caret                   { Ignore, Add, Remove, Force }
 #  Add or remove space after a block pointer caret
 #  '^int (int arg){...}' vs. '^ int (int arg){...}'

 #sp_after_oc_msg_receiver                  { Ignore, Add, Remove, Force }
 #  Add or remove space between the receiver and selector in a message.
 #  '[receiver selector ...]'

 #sp_after_oc_property                      { Ignore, Add, Remove, Force }
 #  Add or remove space after @property.

 #sp_cond_colon                             { Ignore, Add, Remove, Force }
 #  Add or remove space around the ':' in 'b ? t : f'

 #sp_cond_colon_before                      { Ignore, Add, Remove, Force }
 #  Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.

 #sp_cond_colon_after                       { Ignore, Add, Remove, Force }
 #  Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.

 #sp_cond_question                          { Ignore, Add, Remove, Force }
 #  Add or remove space around the '?' in 'b ? t : f'

 #sp_cond_question_before                   { Ignore, Add, Remove, Force }
 #  Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.

 #sp_cond_question_after                    { Ignore, Add, Remove, Force }
 #  Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.

 #sp_cond_ternary_short                     { Ignore, Add, Remove, Force }
 #  In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.

 #sp_case_label                             { Ignore, Add, Remove, Force }
 #  Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.

 #sp_range                                  { Ignore, Add, Remove, Force }
 #  Control the space around the D '..' operator.

 #sp_after_for_colon                        { Ignore, Add, Remove, Force }
 #  Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)

 #sp_before_for_colon                       { Ignore, Add, Remove, Force }
 #  Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)

 #sp_extern_paren                           { Ignore, Add, Remove, Force }
 #  Control the spacing in 'extern (C)' (D)

 sp_cmt_cpp_start                        = force
 #  Control the space after the opening of a C++ comment '// A' vs '//A'

 #sp_cmt_cpp_doxygen                        { False, True }
 #  TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.

 #sp_endif_cmt                              { Ignore, Add, Remove, Force }
 #  Controls the spaces between #else or #endif and a trailing comment

 #sp_after_new                              { Ignore, Add, Remove, Force }
 #  Controls the spaces after 'new', 'delete', and 'delete[]'

 #sp_between_new_paren                      { Ignore, Add, Remove, Force }
 #  Controls the spaces between new and '(' in 'new()'

 sp_before_tr_emb_cmt                   = force
 #  Controls the spaces before a trailing or embedded comment

 sp_num_before_tr_emb_cmt               = 2
 #  Number of spaces before a trailing or embedded comment

 #sp_annotation_paren                       { Ignore, Add, Remove, Force }
 #  Control space between a Java annotation and the open paren.

 #
 # Code alignment (not left column spaces/tabs)
 #

 #align_keep_tabs                           { False, True }
 #  Whether to keep non-indenting tabs

 #align_with_tabs                           { False, True }
 #  Whether to use tabs for aligning

 #align_on_tabstop                          { False, True }
 #  Whether to bump out to the next tab when aligning

 #align_number_left                         { False, True }
 #  Whether to left-align numbers

 #align_keep_extra_space                    { False, True }
 #  Whether to keep whitespace not required for alignment.

 #align_func_params                         { False, True }
 #  Align variable definitions in prototypes and functions

 #align_same_func_call_params               { False, True }
 #  Align parameters in single-line functions that have the same name.
 #  The function names must already be aligned with each other.

 #align_var_def_span                        Number
 #  The span for aligning variable definitions (0=don't align)

 #align_var_def_star_style                  Number
 #  How to align the star in variable definitions.
 #   0=Part of the type     'void *   foo;'
 #   1=Part of the variable 'void     *foo;'
 #   2=Dangling             'void    *foo;'

 #align_var_def_amp_style                   Number
 #  How to align the '&' in variable definitions.
 #   0=Part of the type
 #   1=Part of the variable
 #   2=Dangling

 #align_var_def_thresh                      Number
 #  The threshold for aligning variable definitions (0=no limit)

 #align_var_def_gap                         Number
 #  The gap for aligning variable definitions

 #align_var_def_colon                       { False, True }
 #  Whether to align the colon in struct bit fields

 #align_var_def_attribute                   { False, True }
 #  Whether to align any attribute after the variable name

 #align_var_def_inline                      { False, True }
 #  Whether to align inline struct/enum/union variable definitions

 #align_assign_span                         Number
 #  The span for aligning on '=' in assignments (0=don't align)

 #align_assign_thresh                       Number
 #  The threshold for aligning on '=' in assignments (0=no limit)

 #align_enum_equ_span                       Number
 #  The span for aligning on '=' in enums (0=don't align)

 #align_enum_equ_thresh                     Number
 #  The threshold for aligning on '=' in enums (0=no limit)

 #align_var_struct_span                     Number
 #  The span for aligning struct/union (0=don't align)

 #align_var_struct_thresh                   Number
 #  The threshold for aligning struct/union member definitions (0=no limit)

 #align_var_struct_gap                      Number
 #  The gap for aligning struct/union member definitions

 #align_struct_init_span                    Number
 #  The span for aligning struct initializer values (0=don't align)

 #align_typedef_gap                         Number
 #  The minimum space between the type and the synonym of a typedef

 #align_typedef_span                        Number
 #  The span for aligning single-line typedefs (0=don't align)

 #align_typedef_func                        Number
 #  How to align typedef'd functions with other typedefs
 #  0: Don't mix them at all
 #  1: align the open paren with the types
 #  2: align the function type name with the other type names

 #align_typedef_star_style                  Number
 #  Controls the positioning of the '*' in typedefs. Just try it.
 #  0: Align on typedef type, ignore '*'
 #  1: The '*' is part of type name: typedef int  *pint;
 #  2: The '*' is part of the type, but dangling: typedef int *pint;

 #align_typedef_amp_style                   Number
 #  Controls the positioning of the '&' in typedefs. Just try it.
 #  0: Align on typedef type, ignore '&'
 #  1: The '&' is part of type name: typedef int  &pint;
 #  2: The '&' is part of the type, but dangling: typedef int &pint;

 #align_right_cmt_span                      Number
 #  The span for aligning comments that end lines (0=don't align)

 #align_right_cmt_mix                       { False, True }
 #  If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment

 #align_right_cmt_gap                       Number
 #  If a trailing comment is more than this number of columns away from the text it follows,
 #  it will qualify for being aligned. This has to be > 0 to do anything.

 #align_right_cmt_at_col                    Number
 #  Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)

 #align_func_proto_span                     Number
 #  The span for aligning function prototypes (0=don't align)

 #align_func_proto_gap                      Number
 #  Minimum gap between the return type and the function name.

 #align_on_operator                         { False, True }
 #  Align function protos on the 'operator' keyword instead of what follows

 #align_mix_var_proto                       { False, True }
 #  Whether to mix aligning prototype and variable declarations.
 #  If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.

 #align_single_line_func                    { False, True }
 #  Align single-line functions with function prototypes, uses align_func_proto_span

 #align_single_line_brace                   { False, True }
 #  Aligning the open brace of single-line functions.
 #  Requires align_single_line_func=true, uses align_func_proto_span

 #align_single_line_brace_gap               Number
 #  Gap for align_single_line_brace.
 #  

 #align_oc_msg_spec_span                    Number
 #  The span for aligning ObjC msg spec (0=don't align)

 #align_nl_cont                             { False, True }
 #  Whether to align macros wrapped with a backslash and a newline.
 #  This will not work right if the macro contains a multi-line comment.

 #align_pp_define_together                  { False, True }
 #  # Align macro functions and variables together
 #  

 #align_pp_define_gap                       Number
 #  The minimum space between label and value of a preprocessor define

 #align_pp_define_span                      Number
 #  The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)

 #align_left_shift                          { False, True }
 #  Align lines that start with '<<' with previous '<<'. Default=true

 #align_oc_msg_colon_span                   Number
 #  Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)

 #align_oc_msg_colon_first                  { False, True }
 #  If true, always align with the first parameter, even if it is too short.

 #align_oc_decl_colon                       { False, True }
 #  Aligning parameters in an Obj-C '+' or '-' declaration on the ':'

 #
 # Newline adding and removing options
 #

 #nl_collapse_empty_body                    { False, True }
 #  Whether to collapse empty blocks between '{' and '}'

 #nl_assign_leave_one_liners                { False, True }
 #  Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'

 #nl_class_leave_one_liners                 { False, True }
 #  Don't split one-line braced statements inside a class xx { } body

 #nl_enum_leave_one_liners                  { False, True }
 #  Don't split one-line enums: 'enum foo { BAR = 15 };'

 #nl_getset_leave_one_liners                { False, True }
 #  Don't split one-line get or set functions

 #nl_func_leave_one_liners                  { False, True }
 #  Don't split one-line function definitions - 'int foo() { return 0; }'

 #nl_cpp_lambda_leave_one_liners            { False, True }
 #  Don't split one-line C++11 lambdas - '[]() { return 0; }'

 #nl_if_leave_one_liners                    { False, True }
 #  Don't split one-line if/else statements - 'if(a) b++;'

 #nl_oc_msg_leave_one_liner                 { False, True }
 #  Don't split one-line OC messages

 nl_start_of_file                        = remove
 #  Add or remove newlines at the start of the file

 #nl_start_of_file_min                      Number
 #  The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'

 nl_end_of_file                          = force
 #  Add or remove newline at the end of the file

 nl_end_of_file_min                      = 2
 #  The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')

 nl_assign_brace                         = remove
 #  Add or remove newline between '=' and '{'

 #nl_assign_square                          { Ignore, Add, Remove, Force }
 #  Add or remove newline between '=' and '[' (D only)

 #nl_after_square_assign                    { Ignore, Add, Remove, Force }
 #  Add or remove newline after '= [' (D only). Will also affect the newline before the ']'

 nl_func_var_def_blk                     = 1
 #  The number of blank lines after a block of variable definitions at the top of a function body
 #  0 = No change (default)

 #nl_typedef_blk_start                      Number
 #  The number of newlines before a block of typedefs
 #  0 = No change (default)

 #nl_typedef_blk_end                        Number
 #  The number of newlines after a block of typedefs
 #  0 = No change (default)

 #nl_typedef_blk_in                         Number
 #  The maximum consecutive newlines within a block of typedefs
 #  0 = No change (default)

 #nl_var_def_blk_start                      Number
 #  The number of newlines before a block of variable definitions not at the top of a function body
 #  0 = No change (default)

 #nl_var_def_blk_end                        Number
 #  The number of newlines after a block of variable definitions not at the top of a function body
 #  0 = No change (default)

 #nl_var_def_blk_in                         Number
 #  The maximum consecutive newlines within a block of variable definitions
 #  0 = No change (default)

 #nl_fcall_brace                          = remove
 #  Add or remove newline between a function call's ')' and '{', as in:
 #  list_for_each(item, &list) { }

 nl_enum_brace                           = remove
 #  Add or remove newline between 'enum' and '{'

 nl_struct_brace                         = remove
 #  Add or remove newline between 'struct and '{'

 nl_union_brace                          = remove
 #  Add or remove newline between 'union' and '{'

 nl_if_brace                             = remove
 #  Add or remove newline between 'if' and '{'

 nl_brace_else                           = remove
 #  Add or remove newline between '}' and 'else'

 #nl_elseif_brace                           { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'else if' and '{'
 #  If set to ignore, nl_if_brace is used instead

 nl_else_brace                           = remove
 #  Add or remove newline between 'else' and '{'

 #nl_else_if                                { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'else' and 'if'

 #nl_brace_finally                          { Ignore, Add, Remove, Force }
 #  Add or remove newline between '}' and 'finally'

 #nl_finally_brace                          { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'finally' and '{'

 nl_try_brace                            = remove
 #  Add or remove newline between 'try' and '{'

 #nl_getset_brace                           { Ignore, Add, Remove, Force }
 #  Add or remove newline between get/set and '{'

 nl_for_brace                            = remove
 #  Add or remove newline between 'for' and '{'

 nl_catch_brace                          = remove
 #  Add or remove newline between 'catch' and '{'

 #nl_brace_catch                            { Ignore, Add, Remove, Force }
 #  Add or remove newline between '}' and 'catch'

 #nl_brace_square                           { Ignore, Add, Remove, Force }
 #  Add or remove newline between '}' and ']'

 #nl_brace_fparen                           { Ignore, Add, Remove, Force }
 #  Add or remove newline between '}' and ')' in a function invocation

 nl_while_brace                          = remove
 #  Add or remove newline between 'while' and '{'

 #nl_scope_brace                            { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'scope (x)' and '{' (D)

 #nl_unittest_brace                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'unittest' and '{' (D)

 #nl_version_brace                          { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'version (x)' and '{' (D)

 #nl_using_brace                            { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'using' and '{'

 #nl_brace_brace                            { Ignore, Add, Remove, Force }
 #  Add or remove newline between two open or close braces.
 #  Due to general newline/brace handling, REMOVE may not work.

 nl_do_brace                             = remove
 #  Add or remove newline between 'do' and '{'

 nl_brace_while                          = remove
 #  Add or remove newline between '}' and 'while' of 'do' statement

 nl_switch_brace                         = remove
 #  Add or remove newline between 'switch' and '{'

 #nl_multi_line_cond                        { False, True }
 #  Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
 #  Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.

 #nl_multi_line_define                      { False, True }
 #  Force a newline in a define after the macro name for multi-line defines.

 #nl_before_case                          = true
 #  Whether to put a newline before 'case' statement

 #nl_before_throw                           { Ignore, Add, Remove, Force }
 #  Add or remove newline between ')' and 'throw'

 #nl_after_case                           = false
 #  Whether to put a newline after 'case' statement

 #nl_case_colon_brace                       { Ignore, Add, Remove, Force }
 #  Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.

 nl_namespace_brace                      = remove
 #  Newline between namespace and {

 #nl_template_class                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between 'template<>' and whatever follows.

 nl_class_brace                          = remove
 #  Add or remove newline between 'class' and '{'

 #nl_class_init_args                        { Ignore, Add, Remove, Force }
 #  Add or remove newline after each ',' in the class base list

 #nl_constr_init_args                       { Ignore, Add, Remove, Force }
 #  Add or remove newline after each ',' in the constructor member initialization

 #nl_func_type_name                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between return type and function name in a function definition

 #nl_func_type_name_class                   { Ignore, Add, Remove, Force }
 #  Add or remove newline between return type and function name inside a class {}
 #  Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.

 #nl_func_scope_name                        { Ignore, Add, Remove, Force }
 #  Add or remove newline between function scope and name in a definition
 #  Controls the newline after '::' in 'void A::f() { }'

 #nl_func_proto_type_name                   { Ignore, Add, Remove, Force }
 #  Add or remove newline between return type and function name in a prototype

 #nl_func_paren                             { Ignore, Add, Remove, Force }
 #  Add or remove newline between a function name and the opening '('

 #nl_func_def_paren                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between a function name and the opening '(' in the definition

 #nl_func_decl_start                        { Ignore, Add, Remove, Force }
 #  Add or remove newline after '(' in a function declaration

 #nl_func_def_start                         { Ignore, Add, Remove, Force }
 #  Add or remove newline after '(' in a function definition

 #nl_func_decl_start_single                 { Ignore, Add, Remove, Force }
 #  Overrides nl_func_decl_start when there is only one parameter.

 #nl_func_def_start_single                  { Ignore, Add, Remove, Force }
 #  Overrides nl_func_def_start when there is only one parameter.

 #nl_func_decl_args                         { Ignore, Add, Remove, Force }
 #  Add or remove newline after each ',' in a function declaration

 #nl_func_def_args                          { Ignore, Add, Remove, Force }
 #  Add or remove newline after each ',' in a function definition

 #nl_func_decl_end                          { Ignore, Add, Remove, Force }
 #  Add or remove newline before the ')' in a function declaration

 #nl_func_def_end                           { Ignore, Add, Remove, Force }
 #  Add or remove newline before the ')' in a function definition

 #nl_func_decl_end_single                   { Ignore, Add, Remove, Force }
 #  Overrides nl_func_decl_end when there is only one parameter.

 #nl_func_def_end_single                    { Ignore, Add, Remove, Force }
 #  Overrides nl_func_def_end when there is only one parameter.

 #nl_func_decl_empty                        { Ignore, Add, Remove, Force }
 #  Add or remove newline between '()' in a function declaration.

 #nl_func_def_empty                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between '()' in a function definition.

 #nl_oc_msg_args                            { False, True }
 #  Whether to put each OC message parameter on a separate line
 #  See nl_oc_msg_leave_one_liner

 nl_fdef_brace                           = remove
 #  Add or remove newline between function signature and '{'

 #nl_cpp_ldef_brace                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between C++11 lambda signature and '{'

 #nl_return_expr                            { Ignore, Add, Remove, Force }
 #  Add or remove a newline between the return keyword and return expression.

 #nl_after_semicolon                        { False, True }
 #  Whether to put a newline after semicolons, except in 'for' statements

 #nl_paren_dbrace_open                      { Ignore, Add, Remove, Force }
 #  Java: Control the newline between the ')' and '{{' of the double brace initializer.

 #nl_after_brace_open                       { False, True }
 #  Whether to put a newline after brace open.
 #  This also adds a newline before the matching brace close.

 #nl_after_brace_open_cmt                   { False, True }
 #  If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
 #  placed between the open brace and a trailing single-line comment.

 #nl_after_vbrace_open                      { False, True }
 #  Whether to put a newline after a virtual brace open with a non-empty body.
 #  These occur in un-braced if/while/do/for statement bodies.

 #nl_after_vbrace_open_empty                { False, True }
 #  Whether to put a newline after a virtual brace open with an empty body.
 #  These occur in un-braced if/while/do/for statement bodies.

 nl_after_brace_close                      = True
 #  Whether to put a newline after a brace close.
 #  Does not apply if followed by a necessary ';'.

 #nl_after_vbrace_close                     { False, True }
 #  Whether to put a newline after a virtual brace close.
 #  Would add a newline before return in: 'if (foo) a++; return;'

 #nl_brace_struct_var                       { Ignore, Add, Remove, Force }
 #  Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
 #  Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close

 #nl_define_macro                           { False, True }
 #  Whether to alter newlines in '#define' macros

 #nl_squeeze_ifdef                          { False, True }
 #  Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'. Does not affect the whole-file #ifdef.

 #nl_before_if                              { Ignore, Add, Remove, Force }
 #  Add or remove blank line before 'if'

 #nl_after_if                               { Ignore, Add, Remove, Force }
 #  Add or remove blank line after 'if' statement

 #nl_before_for                             { Ignore, Add, Remove, Force }
 #  Add or remove blank line before 'for'

 #nl_after_for                              { Ignore, Add, Remove, Force }
 #  Add or remove blank line after 'for' statement

 #nl_before_while                           { Ignore, Add, Remove, Force }
 #  Add or remove blank line before 'while'

 #nl_after_while                            { Ignore, Add, Remove, Force }
 #  Add or remove blank line after 'while' statement

 #nl_before_switch                          { Ignore, Add, Remove, Force }
 #  Add or remove blank line before 'switch'

 #nl_after_switch                           { Ignore, Add, Remove, Force }
 #  Add or remove blank line after 'switch' statement

 #nl_before_do                              { Ignore, Add, Remove, Force }
 #  Add or remove blank line before 'do'

 #nl_after_do                               { Ignore, Add, Remove, Force }
 #  Add or remove blank line after 'do/while' statement

 #nl_ds_struct_enum_cmt                     { False, True }
 #  Whether to double-space commented-entries in struct/enum

 #nl_ds_struct_enum_close_brace             { False, True }
 #  Whether to double-space before the close brace of a struct/union/enum
 #  (lower priority than 'eat_blanks_before_close_brace')

 #nl_class_colon                            { Ignore, Add, Remove, Force }
 #  Add or remove a newline around a class colon.
 #  Related to pos_class_colon, nl_class_init_args, and pos_class_comma.

 #nl_constr_colon                           { Ignore, Add, Remove, Force }
 #  Add or remove a newline around a class constructor colon.
 #  Related to pos_constr_colon, nl_constr_init_args, and pos_constr_comma.

 #nl_create_if_one_liner                    { False, True }
 #  Change simple unbraced if statements into a one-liner
 #  'if(b)\n i++;' => 'if(b) i++;'

 #nl_create_for_one_liner                   { False, True }
 #  Change simple unbraced for statements into a one-liner
 #  'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'

 #nl_create_while_one_liner                 { False, True }
 #  Change simple unbraced while statements into a one-liner
 #  'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'

 #
 # Positioning options
 #

 #pos_arith                                 { Ignore, Lead, Trail }
 #  The position of arithmetic operators in wrapped expressions

 #pos_assign                                { Ignore, Lead, Trail }
 #  The position of assignment in wrapped expressions.
 #  Do not affect '=' followed by '{'

 #pos_bool                                  { Ignore, Lead, Trail }
 #  The position of boolean operators in wrapped expressions

 #pos_compare                               { Ignore, Lead, Trail }
 #  The position of comparison operators in wrapped expressions

 #pos_conditional                           { Ignore, Lead, Trail }
 #  The position of conditional (b ? t : f) operators in wrapped expressions

 #pos_comma                                 { Ignore, Lead, Trail }
 #  The position of the comma in wrapped expressions

 #pos_class_comma                           { Ignore, Lead, Trail }
 #  The position of the comma in the class base list

 #pos_constr_comma                          { Ignore, Lead, Trail }
 #  The position of the comma in the constructor initialization list

 #pos_class_colon                           { Ignore, Lead, Trail }
 #  The position of colons between class and base class list

 #pos_constr_colon                          { Ignore, Lead, Trail }
 #  The position of colons between constructor and member initialization

 #
 # Line Splitting options
 #

 #code_width                                Number
 #  Try to limit code width to N number of columns

 #ls_for_split_full                         { False, True }
 #  Whether to fully split long 'for' statements at semi-colons

 #ls_func_split_full                        { False, True }
 #  Whether to fully split long function protos/calls at commas

 #ls_code_width                             { False, True }
 #  Whether to split lines as close to code_width as possible and ignore some groupings

 #
 # Blank line options
 #

 nl_max                                  = 3
 #  The maximum consecutive newlines

 #nl_after_func_proto                       Number
 #  The number of newlines after a function prototype, if followed by another function prototype

 #nl_after_func_proto_group                 Number
 #  The number of newlines after a function prototype, if not followed by another function prototype

 nl_after_func_body                      = 3
 #  The number of newlines after '}' of a multi-line function body

 nl_after_func_body_class                = 2
 #  The number of newlines after '}' of a multi-line function body in a class declaration

 #nl_after_func_body_one_liner              Number
 #  The number of newlines after '}' of a single line function body

 #nl_before_block_comment                   Number
 #  The minimum number of newlines before a multi-line comment.
 #  Doesn't apply if after a brace open or another multi-line comment.

 #nl_before_c_comment                       Number
 #  The minimum number of newlines before a single-line C comment.
 #  Doesn't apply if after a brace open or other single-line C comments.

 #nl_before_cpp_comment                     Number
 #  The minimum number of newlines before a CPP comment.
 #  Doesn't apply if after a brace open or other CPP comments.

 #nl_after_multiline_comment                { False, True }
 #  Whether to force a newline after a multi-line comment.

 nl_after_label_colon                    = true
 #  Whether to force a newline after a label's colon.

 #nl_after_struct                           Number
 #  The number of newlines after '}' or ';' of a struct/enum/union definition

 #nl_after_class                            Number
 #  The number of newlines after '}' or ';' of a class definition

 #nl_before_access_spec                     Number
 #  The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
 #  Will not change the newline count if after a brace open.
 #  0 = No change.

 #nl_after_access_spec                      Number
 #  The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
 #  0 = No change.

 #nl_comment_func_def                       Number
 #  The number of newlines between a function def and the function comment.
 #  0 = No change.

 #nl_after_try_catch_finally                Number
 #  The number of newlines after a try-catch-finally block that isn't followed by a brace close.
 #  0 = No change.

 #nl_around_cs_property                     Number
 #  The number of newlines before and after a property, indexer or event decl.
 #  0 = No change.

 #nl_between_get_set                        Number
 #  The number of newlines between the get/set/add/remove handlers in C#.
 #  0 = No change.

 #nl_property_brace                         { Ignore, Add, Remove, Force }
 #  Add or remove newline between C# property and the '{'

 eat_blanks_after_open_brace             = true
 #  Whether to remove blank lines after '{'

 eat_blanks_before_close_brace           = true
 #  Whether to remove blank lines before '}'

 #nl_remove_extra_newlines                  Number
 #  How aggressively to remove extra newlines not in preproc.
 #  0: No change
 #  1: Remove most newlines not handled by other config
 #  2: Remove all newlines and reformat completely by config

 #nl_before_return                          { False, True }
 #  Whether to put a blank line before 'return' statements, unless after an open brace.

 #nl_after_return                           { False, True }
 #  Whether to put a blank line after 'return' statements, unless followed by a close brace.

 #nl_after_annotation                       { Ignore, Add, Remove, Force }
 #  Whether to put a newline after a Java annotation statement.
 #  Only affects annotations that are after a newline.

 #nl_between_annotation                     { Ignore, Add, Remove, Force }
 #  Controls the newline between two annotations.

 #
 # Code modifying options (non-whitespace)
 #

 mod_full_brace_do                       = remove
 #  Add or remove braces on single-line 'do' statement

 mod_full_brace_for                      = remove
 #  Add or remove braces on single-line 'for' statement

 #mod_full_brace_function                   { Ignore, Add, Remove, Force }
 #  Add or remove braces on single-line function definitions. (Pawn)

 #mod_full_brace_if                         { Ignore, Add, Remove, Force }
 #  Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.

 mod_full_brace_if_chain                 = true
 #  Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
 #  If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.

 mod_full_brace_nl                       = 1
 #  Don't remove braces around statements that span N newlines

 mod_full_brace_while                    = remove
 #  Add or remove braces on single-line 'while' statement

 #mod_full_brace_using                      { Ignore, Add, Remove, Force }
 #  Add or remove braces on single-line 'using ()' statement

 #mod_paren_on_return                     = remove
 #  Add or remove unnecessary paren on 'return' statement

 #mod_pawn_semicolon                        { False, True }
 #  Whether to change optional semicolons to real semicolons

 #mod_full_paren_if_bool                    { False, True }
 #  Add parens on 'while' and 'if' statement around bools

 #mod_remove_extra_semicolon                { False, True }
 #  Whether to remove superfluous semicolons

 #mod_add_long_function_closebrace_comment  Number
 #  If a function body exceeds the specified number of newlines and doesn't have a comment after
 #  the close brace, a comment will be added.

 #mod_add_long_namespace_closebrace_comment Number
 #  If a namespace body exceeds the specified number of newlines and doesn't have a comment after
 #  the close brace, a comment will be added.

 #mod_add_long_switch_closebrace_comment    Number
 #  If a switch body exceeds the specified number of newlines and doesn't have a comment after
 #  the close brace, a comment will be added.

 #mod_add_long_ifdef_endif_comment          Number
 #  If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
 #  the #endif, a comment will be added.

 #mod_add_long_ifdef_else_comment           Number
 #  If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
 #  the #else, a comment will be added.

 #mod_sort_import                           { False, True }
 #  If TRUE, will sort consecutive single-line 'import' statements [Java, D]

 #mod_sort_using                            { False, True }
 #  If TRUE, will sort consecutive single-line 'using' statements [C#]

 #mod_sort_include                          { False, True }
 #  If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
 #  This is generally a bad idea, as it may break your code.

 #mod_move_case_break                       { False, True }
 #  If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.

 #mod_case_brace                            { Ignore, Add, Remove, Force }
 #  Will add or remove the braces around a fully braced case statement.
 #  Will only remove the braces if there are no variable declarations in the block.

 #mod_remove_empty_return                   { False, True }
 #  If TRUE, it will remove a void 'return;' that appears as the last statement in a function.

 #
 # Comment modifications
 #

 #cmt_width                                 Number
 #  Try to wrap comments at cmt_width columns

 #cmt_reflow_mode                           Number
 #  Set the comment reflow mode (default: 0)
 #  0: no reflowing (apart from the line wrapping due to cmt_width)
 #  1: no touching at all
 #  2: full reflow
 #  

 #cmt_convert_tab_to_spaces                 { False, True }
 #  Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.

 #cmt_indent_multi                          { False, True }
 #  If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
 #  Default is true.

 #cmt_c_group                               { False, True }
 #  Whether to group c-comments that look like they are in a block

 #cmt_c_nl_start                            { False, True }
 #  Whether to put an empty '/*' on the first line of the combined c-comment

 #cmt_c_nl_end                              { False, True }
 #  Whether to put a newline before the closing '*/' of the combined c-comment

 #cmt_cpp_group                             { False, True }
 #  Whether to group cpp-comments that look like they are in a block

 #cmt_cpp_nl_start                          { False, True }
 #  Whether to put an empty '/*' on the first line of the combined cpp-comment

 #cmt_cpp_nl_end                            { False, True }
 #  Whether to put a newline before the closing '*/' of the combined cpp-comment

 #cmt_cpp_to_c                              { False, True }
 #  Whether to change cpp-comments into c-comments

 #cmt_star_cont                             { False, True }
 #  Whether to put a star on subsequent comment lines

 #cmt_sp_before_star_cont                   Number
 #  The number of spaces to insert at the start of subsequent comment lines

 #cmt_sp_after_star_cont                    Number
 #  The number of spaces to insert after the star on subsequent comment lines

 #cmt_multi_check_last                      { False, True }
 #  For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
 #  the comment are the same length. Default=True

 #cmt_insert_file_header                    String
 #  The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
 #  Will substitute $(filename) with the current file's name.

 #cmt_insert_file_footer                    String
 #  The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
 #  Will substitute $(filename) with the current file's name.

 #cmt_insert_func_header                    String
 #  The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
 #  Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
 #  Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }

 #cmt_insert_class_header                   String
 #  The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
 #  Will substitute $(class) with the class name.

 #cmt_insert_oc_msg_header                  String
 #  The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
 #  Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.

 #cmt_insert_before_preproc                 { False, True }
 #  If a preprocessor is encountered when stepping backwards from a function name, then
 #  this option decides whether the comment should be inserted.
 #  Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.

 #
 # Preprocessor options
 #

 pp_indent                               = remove
 #  Control indent of preprocessors inside #if blocks at brace level 0 (file-level)

 #pp_indent_at_level                        { False, True }
 #  Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)

 #pp_indent_count                           Number
 #  Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
 #  If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
 #  Default=1.

 #pp_space                                  { Ignore, Add, Remove, Force }
 #  Add or remove space after # based on pp_level of #if blocks

 #pp_space_count                            Number
 #  Sets the number of spaces added with pp_space

 #pp_indent_region                          Number
 #  The indent for #region and #endregion in C# and '#pragma region' in C/C++

 #pp_region_indent_code                     { False, True }
 #  Whether to indent the code between #region and #endregion

 #pp_indent_if                              Number
 #  If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level.
 #  0:  indent preprocessors using output_tab_size.
 #  >0: column at which all preprocessors will be indented.

 #pp_if_indent_code                         { False, True }
 #  Control whether to indent the code between #if, #else and #endif.

 #pp_define_at_level                        { False, True }
 #  Whether to indent '#define' at the brace level (true) or from column 1 (false)