stephenscaff · October 24, 2022 23:19
diff --git a/ffmpeg-cmnds.bash b/ffmpeg-cmnds.bash
 # FFMPEG Cmds
 # https://ffmpeg.org/ffmpeg-all.html#Video-Options
 # -i input file

 # Basic convert mov to mp4
 ffmpeg -i input.mov output.mp4


 # Simple Compress ( amount by -b 2500k)
 # -b: bitrate
 # -an: disables audio
 ffmpeg -i input.mp4  -b 2500k -an output.min.mp4


 # High-quality Encoding 
 # crf (Constant Rate Factor) param controls output quality.
 # The lower crf, the higher the quality (range: 0-51). The default value is 23
 # -c[:stream_specifier] codec (input/output,per-stream)
 # -codec[:stream_specifier] codec (input/output,per-stream)
 # eg: -c:v libx264: encodes all video streams with libx264

 # Encode and Legit Compress (compression amount by -crf 30)
 ffmpeg -i input.mp4 -c:v libx264 -crf 30 output.mp4


 # Create a cut at start / end, compress
 ffmpeg -i input.mp4 -ss 00:02 -to 00:10 -c:v libx264 -crf 30 output.mp4


 # Increase Playback speed, using setpts filters
 # Increase speed by x 10
 ffmpeg -i input.mp4 -filter:v "setpts=PTS/10" output.mp4


 # Cropping 
 # Crop filter has 4 params w, h, x and y
 # ie: crop=100:100:0:0 means "crop the 100 x 100 pixels from top right corner"
 ffmpeg -i input.mp4 -filter:v "crop=w:h:x:y" output.mp4


 # Reverse a vid 
 ffmpeg -i input.mp4 -vf reverse output_reversed.mp4


 # Forward & Reverse - Create a vid that contacts the vid in reverse (no audio)
 ffmpeg -i input.mp4 -filter_complex "[0:v]reverse,fifo[r];[0:v][r] concat=n=2:v=1 [v]" -map "[v]" output.mp4


 # Forward & Reverse - with filter (has audio)
 ffmpeg -i input.mp4 -filter_complex "[0:v]reverse,fifo[r];[0:v][0:a][r] [0:a]concat=n=2:v=1:a=1 [v] [a]" -map "[v]" -map "[a]" output.mp4

 # Speed up vid
 ffmpeg -i input.mp4 -r 16 -filter:v "setpts=0.35*PTS" output.faster.min.mp4

 # Concat multi vids 
 # 1 - Create Txt file with vids (in vids directory)
 echo file file1.mp4 >  list.txt 
 echo file file2.mp4 >> list.txt

 # 2 - Concatenate Files
 ffmpeg -f concat -i list.txt -c copy output.mp4


 # Triming 
 # -i: Input file
 # -ss: start time, e.g. 00:01:23.000 or 83secs (If this is placed before the input file it seeks to this position in the input file. If it's after the input it will split from that exact position.)
 # -t: duraction of clip
 # -to: end time
 # -c: copies without re-encoding
 # -avoid_negative_ts make_zero: Sets the first timestamp as 0
 # The times are passed in parsed eg 00:00:10.456
 # The output file is the last part of the command
 # ex: ffmpeg -ss [start] -i in.mp4 -t [duration] -c copy out.mp4
 ffmpeg -i input.mp4 -ss 0:00:00 -to 0:00:06.5 output.mp4

 # Trim With Re-encoding 
 # leave out -c (copy) param to automatically re-encode output
 # eg: ffmpeg -ss [start] -i in.mp4 -t [duration] -c:v libx264 -c:a aac -strict experimental -b:a 128k out.mp4

 
 # Take Screen Grab of Frame
 ffmpeg -ss 00:00:01 -i input.mp4 -frames:v 1 -q:v 2 output.jpg

 # Extract Frames 
 # To extract all frames from between 1 and 5 seconds, and also between 11 and 15 seconds:
 ffmpeg -i input.mp4 -vf select='between(t,1,5)+between(t,11,15)' -vsync 0 output.png

 # To extract one frame per second only:
 ffmpeg -i in.mp4 -fps=1 -vsync 0 output.png


 # Create a video slideshow from images
 # -r:  marks the image framerate (inverse time of each image); 
 # -vf: fps=25 marks the true framerate of the output.
 ffmpeg -r 1/5 -i img%03d.png -c:v libx264 -vf fps=25 -pix_fmt yuv420p out.mp4

 # EQ Filters
 # Adjust Brightness
 ffmpeg -i gateway.min.mp4 -vf eq=brightness=0.06 -c:a copy gateway.b2.min.mp4
	# FFMPEG Cmds
	# https://ffmpeg.org/ffmpeg-all.html#Video-Options
	# -i input file

	# Basic convert mov to mp4
	ffmpeg -i input.mov output.mp4


	# Simple Compress ( amount by -b 2500k)
	# -b: bitrate
	# -an: disables audio
	ffmpeg -i input.mp4 -b 2500k -an output.min.mp4


	# High-quality Encoding
	# crf (Constant Rate Factor) param controls output quality.
	# The lower crf, the higher the quality (range: 0-51). The default value is 23
	# -c[:stream_specifier] codec (input/output,per-stream)
	# -codec[:stream_specifier] codec (input/output,per-stream)
	# eg: -c:v libx264: encodes all video streams with libx264

	# Encode and Legit Compress (compression amount by -crf 30)
	ffmpeg -i input.mp4 -c:v libx264 -crf 30 output.mp4


	# Create a cut at start / end, compress
	ffmpeg -i input.mp4 -ss 00:02 -to 00:10 -c:v libx264 -crf 30 output.mp4


	# Increase Playback speed, using setpts filters
	# Increase speed by x 10
	ffmpeg -i input.mp4 -filter:v "setpts=PTS/10" output.mp4


	# Cropping
	# Crop filter has 4 params w, h, x and y
	# ie: crop=100:100:0:0 means "crop the 100 x 100 pixels from top right corner"
	ffmpeg -i input.mp4 -filter:v "crop=w:h:x:y" output.mp4


	# Reverse a vid
	ffmpeg -i input.mp4 -vf reverse output_reversed.mp4


	# Forward & Reverse - Create a vid that contacts the vid in reverse (no audio)
	ffmpeg -i input.mp4 -filter_complex "[0:v]reverse,fifo[r];[0:v][r] concat=n=2:v=1 [v]" -map "[v]" output.mp4


	# Forward & Reverse - with filter (has audio)
	ffmpeg -i input.mp4 -filter_complex "[0:v]reverse,fifo[r];[0:v][0:a][r] [0:a]concat=n=2:v=1:a=1 [v] [a]" -map "[v]" -map "[a]" output.mp4

	# Speed up vid
	ffmpeg -i input.mp4 -r 16 -filter:v "setpts=0.35*PTS" output.faster.min.mp4

	# Concat multi vids
	# 1 - Create Txt file with vids (in vids directory)
	echo file file1.mp4 > list.txt
	echo file file2.mp4 >> list.txt

	# 2 - Concatenate Files
	ffmpeg -f concat -i list.txt -c copy output.mp4


	# Triming
	# -i: Input file
	# -ss: start time, e.g. 00:01:23.000 or 83secs (If this is placed before the input file it seeks to this position in the input file. If it's after the input it will split from that exact position.)
	# -t: duraction of clip
	# -to: end time
	# -c: copies without re-encoding
	# -avoid_negative_ts make_zero: Sets the first timestamp as 0
	# The times are passed in parsed eg 00:00:10.456
	# The output file is the last part of the command
	# ex: ffmpeg -ss [start] -i in.mp4 -t [duration] -c copy out.mp4
	ffmpeg -i input.mp4 -ss 0:00:00 -to 0:00:06.5 output.mp4

	# Trim With Re-encoding
	# leave out -c (copy) param to automatically re-encode output
	# eg: ffmpeg -ss [start] -i in.mp4 -t [duration] -c:v libx264 -c:a aac -strict experimental -b:a 128k out.mp4


	# Take Screen Grab of Frame
	ffmpeg -ss 00:00:01 -i input.mp4 -frames:v 1 -q:v 2 output.jpg

	# Extract Frames
	# To extract all frames from between 1 and 5 seconds, and also between 11 and 15 seconds:
	ffmpeg -i input.mp4 -vf select='between(t,1,5)+between(t,11,15)' -vsync 0 output.png

	# To extract one frame per second only:
	ffmpeg -i in.mp4 -fps=1 -vsync 0 output.png


	# Create a video slideshow from images
	# -r: marks the image framerate (inverse time of each image);
	# -vf: fps=25 marks the true framerate of the output.
	ffmpeg -r 1/5 -i img%03d.png -c:v libx264 -vf fps=25 -pix_fmt yuv420p out.mp4

	# EQ Filters
	# Adjust Brightness
	ffmpeg -i gateway.min.mp4 -vf eq=brightness=0.06 -c:a copy gateway.b2.min.mp4