There are a number of corner cases to consider when dealing with Docker, multiple processes, and signals. Probably the most famous post on this matter is from the Phusion blog. Here, we'll see some examples of how to see these problems first hand, and one way to work around it.
The Phusion blog post recommends using their baseimage-docker. We ran into problems with Phusion's usage of syslog-ng, in particular with it creating unkillable processes pegged at 100% CPU usage. We're still investigating, but in the meanwhile we created the pid1 Haskell package together with a simple fpco/pid1 Docker image.
NOTE The primary reason we wrote our own implementation in Haskell was to
be able to embed it within the Stack build tool.
There are other lightweight init processes already available, such as
dumb-init.
I've also blogged about using
dumb-init. While
this post uses pid1
, there's nothing specific to it versus other init
processes.
The default entrypoint for the ubuntu Docker image is a null entrypoint,
meaning that the provided command will be run directly without any wrapping.
We're going to simulate that experience by using /usr/bin/env
as an
entrypoint, since switching entrypoint back to null isn't yet supported in
released Docker. When you run
/usr/bin/env foo bar baz
, the env
process will exec
the foo
command,
making foo
the new PID 1, which for our purposes gives it the same behavior
as a null entrypoint.
We'll start with our
sigterm.hs
program, which runs ps
(we'll see why soon), then sends itself a SIGTERM
and then loops forever. On a Unix system, the default process behavior when
receiving a SIGTERM
is to exit. Therefore, we'd expect that our process will
just exit when run. Let's see:
docker run --rm --entrypoint /usr/bin/env snoyberg/docker-testing sigterm
PID TTY TIME CMD
1 ? 00:00:00 sigterm
9 ? 00:00:00 ps
Still alive!
Still alive!
Still alive!
^C
The process ignored the SIGTERM
and kept running, until I hit Ctrl-C (we'll
see what that does later). Another feature in the sigterm code base, though,
is that if you give it the command line argument install-handler
, it will
explicitly install a SIGTERM handler which will kill the process. Perhaps
surprisingly, this has a significant impact on our application:
$ docker run --rm --entrypoint /usr/bin/env snoyberg/docker-testing sigterm install-handler
PID TTY TIME CMD
1 ? 00:00:00 sigterm
8 ? 00:00:00 ps
Still alive!
The reason for this is some Linux kernel magic: the kernel treats a process
with PID 1 specially, and does not, by default, kill the process when
receiving the SIGTERM
or SIGINT
signals. This can be very surprising
behavior. For a simpler example, try running the following commands in two
different terminals:
$ docker run --rm --name sleeper ubuntu:16.04 sleep 100
$ docker kill -s TERM sleeper
Notice how the docker run
command does not exit, and if you check your ps aux
output, you'll see that the process is still running. That's because the
sleep
process was not designed to be PID 1, and does not install a special
signal handler. To work around this problem, you've got two choices:
- Ensure every command you run from
docker run
has explicit handling ofSIGTERM
. - Make sure the command you run isn't PID 1, but instead use a process that is
designed to handle
SIGTERM
correctly.
Let's see how the sigterm
program works with our /sbin/pid1
entrypoint:
$ docker run --rm --entrypoint /sbin/pid1 snoyberg/docker-testing sigterm
PID TTY TIME CMD
1 ? 00:00:00 pid1
8 ? 00:00:00 sigterm
12 ? 00:00:00 ps
The program exits immediately, as we'd like. But look at the ps
output: our
first process is now pid1
instead of sigterm
. Since sigerm
is being
launched as a different PID (8 in this case), the special casing from the Linux
kernel does not come into play, and default SIGTERM
handling is active. To
step through exactly what happens in our case:
- Our container is created, and the command
/usr/sbin/pid1 sigterm
is run inside of it. pid1
starts as PID-1, does its business, and thenfork
/exec
s thesigterm
executable.sigterm
raises theSIGTERM
signal to itself, causing it to die.pid1
sees that its child died from SIGTERM (== signal 15) and exits with exit code 143 (== 128 + 15).- Since our PID1 is dead, our container dies too.
This isn't just some magic with sigterm
, you can do the same thing with sleep
:
$ docker run --rm --name sleeper fpco/pid1 sleep 100
$ docker kill -s TERM sleeper
Unlike with the ubuntu
image, this will kill the container immediately, due
to the /sbin/pid1
entrypoint used by fpco/pid1
.
Suppose you have process A, which fork
/exec
s process B. When process B
dies, process A must call waitpid
to get its exit status from the kernel, and
until it does so, process B will be dead but with an entry in the system
process table. This is known as being a zombie.
But what happens if process B outlives process A? In this case, process B is known as an orphan, and needs to be adopted by the init process, aka PID1. It is the init process's job to reap orphans so they do not remain as zombies.
The orphans.hs program will:
- Spawn a child process, and then loop forever calling
ps
- In the child process: run the
echo
command a few times, without callingwaitpid
, and then exit
As you can see, none of the processes involved will reap the zombie echo
processes. The output from the process confirms that we have, in fact, created
zombies:
$ docker run --rm --entrypoint /usr/bin/env snoyberg/docker-testing orphans
1
2
3
4
Still alive!
PID TTY TIME CMD
1 ? 00:00:00 orphans
8 ? 00:00:00 orphans
13 ? 00:00:00 echo <defunct>
14 ? 00:00:00 echo <defunct>
15 ? 00:00:00 echo <defunct>
16 ? 00:00:00 echo <defunct>
17 ? 00:00:00 ps
Still alive!
PID TTY TIME CMD
1 ? 00:00:00 orphans
13 ? 00:00:00 echo <defunct>
14 ? 00:00:00 echo <defunct>
15 ? 00:00:00 echo <defunct>
16 ? 00:00:00 echo <defunct>
18 ? 00:00:00 ps
Still alive!
And so on until we kill the container. That <defunct>
indicates a zombie
process. The issue is that our PID 1, orphans, doesn't do reaping. As you
probably guessed, we can solve this by just using the /sbin/pid1
entrypoint:
$ docker run --rm --entrypoint /sbin/pid1 snoyberg/docker-testing orphans
1
2
3
4
Still alive!
PID TTY TIME CMD
1 ? 00:00:00 pid1
10 ? 00:00:00 orphans
14 ? 00:00:00 orphans
19 ? 00:00:00 echo <defunct>
20 ? 00:00:00 echo <defunct>
21 ? 00:00:00 echo <defunct>
22 ? 00:00:00 echo <defunct>
23 ? 00:00:00 ps
Still alive!
PID TTY TIME CMD
1 ? 00:00:00 pid1
10 ? 00:00:00 orphans
24 ? 00:00:00 ps
Still alive!
pid1
now adopts the echo
processes when the child orphans
process dies,
and reaps accordingly.
Let's try out something else: process A is the primary command for the Docker container, and it spawns process B. Before process B exits, process A exits, causing the Docker container to exit. In this case, the running process B will be forcibly closed (see this Stack Overflow question for details). We can see this with our surviving.hs program:
$ docker run --rm --entrypoint /usr/bin/env snoyberg/docker-testing surviving
Parent sleeping
Child: 1
Child: 2
Child: 4
Child: 3
Child: 1
Child: 2
Child: 3
Child: 4
Parent exiting
Unfortunately this doesn't give our child processes a chance to do any cleanup.
Instead, we would rather send them a SIGTERM
, and after a grace period send
them a SIGKILL
. This is exactly what pid1
does:
$ docker run --rm --entrypoint /sbin/pid1 snoyberg/docker-testing surviving
Parent sleeping
Child: 2
Child: 3
Child: 1
Child: 4
Child: 2
Child: 1
Child: 4
Child: 3
Parent exiting
Got a TERM
Got a TERM
Got a TERM
Got a TERM
When you run sleep 60
and then hit Ctrl-C, the sleep
process itself
receives a SIGINT
. When you instead run docker run --rm fpco/pid1 sleep 60
and hit Ctrl-C, you may think that the same thing is happening. However, in
reality, it's not at all the same. Your docker run
call creates a docker run
process, which and that process sends a command to the Docker daemon on
your machine, and that daemon creates the actual sleep
process (inside a
container). When you hit Ctrl-C on your terminal, you're sending SIGINT
to
docker run
, which is in fact sending a command to the Docker daemon, which in
turn sends a SIGINT
to your sleep
process.
Want proof? Try out the following:
$ docker run --rm fpco/pid1 sleep 60&
[1] 417
$ kill -KILL $!
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
69fbc70e95e2 fpco/pid1 "/sbin/pid1 sleep 60" 11 seconds ago Up 11 seconds hopeful_mayer
[1]+ Killed docker run --rm fpco/pid1 sleep 60
In this case, we sent a SIGKILL
to the docker run
command. Unlike SIGINT
or SIGTERM
, and SIGKILL
cannot be handled, and therefore docker run
is
unable to delegate signal handling to a different process. As a result, the
docker run
command itself dies, but the sleep
process (and its container)
continue running.
Some takeaways from this:
- Make sure you use something like
pid1
so that yourSIGINT
orSIGTERM
to thedocker run
process actually get your container to reliably shut down - If you must send a
SIGKILL
to your process, use thedocker kill
command instead
We've used --entrypoint /sbin/pid1
a lot here. In fact, each usage of that
has been superfluous, since the fpco/pid1
and snoyberg/docker-testing
images both use /sbin/pid1
as their default entrypoint anyway. I included it
for explicitness. To prove it to you:
$ docker run --rm fpco/pid1 sleep 60
^C$
But if you don't want to muck with entrypoints, you can always just include
/sbin/pid1
at the beginning of your command, e.g.:
$ docker run --rm --entrypoint /usr/bin/env fpco/pid1 /sbin/pid1 sleep 60
^C$
And if you have your own Docker image and you'd just like to include the pid1
executable, you can download it from the Github releases
page.
You may be tempted to put something like ENTRYPOINT /sbin/pid1
in your
Dockerfile. Let's see why that won't work:
$ cat Dockerfile
FROM fpco/pid1
ENTRYPOINT /sbin/pid1
$ docker build --tag test .
Sending build context to Docker daemon 2.048 kB
Step 1 : FROM fpco/pid1
---> aef1f7b702b9
Step 2 : ENTRYPOINT /sbin/pid1
---> Using cache
---> f875b43a9e40
Successfully built f875b43a9e40
$ docker run --rm test ps
pid1: No arguments provided
The issue here is that we specified /sbin/pid1 in what Docker calls command
form. This is just a raw string which is interpreted by the shell. It is
unable to be passed an additional command (like ps
), and therefore pid1
itself complains that it hasn't been told what to run. The correct way to
specify your entrypoint is ENTRYPOINT ["/sbin/pid1"]
, e.g.:
$ cat Dockerfile
FROM fpco/pid1
ENTRYPOINT ["/sbin/pid1"]
$ docker build --tag test .
Sending build context to Docker daemon 2.048 kB
Step 1 : FROM fpco/pid1
---> aef1f7b702b9
Step 2 : ENTRYPOINT /sbin/pid1
---> Running in ba0fa8c5bd41
---> 4835dec4aae6
Removing intermediate container ba0fa8c5bd41
Successfully built 4835dec4aae6
$ docker run --rm test ps
PID TTY TIME CMD
1 ? 00:00:00 pid1
8 ? 00:00:00 ps
Generally speaking, you should stick with command form in your Dockerfiles at all times. It is explicit about whitespace handling, and avoids the need to use a shell as an interpreter.