Created
June 8, 2021 11:18
-
-
Save ptpt52/e3bf6950c85d02f54cc80bd0a45c5acc to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
starting pid 1017, tty '/dev/ttyS0': '/usr/bin/login.sh' | |
(none) login: ROM: Use nor flash. | |
ERR: Param type error | |
ERR: Param type error | |
R | |
U-Boot 2010.06-dirty (Dec 02 2020 - 10:12:00) | |
DRAM: 64 MiB | |
SF: Got idcode 20 70 18 20 70 | |
spi_flash_probe_xmc multi wire open flag is 103 | |
In: serial | |
Out: serial | |
Err: serial | |
Net: set to RMII | |
FH EMAC | |
Press 'E' to stop autoboot: 0 | |
SF: Got idcode 20 70 18 20 70 | |
spi_flash_probe_xmc multi wire open flag is 103 | |
verify flash image OK | |
load kernel 0x00050000(0x00300000) to 0xa1000000 | |
## Booting kernel from Legacy Image at a1000000 ... | |
Image Name: Linux-3.0.8 | |
Image Type: ARM Linux Kernel Image (uncompressed) | |
Data Size: 2922224 Bytes = 2.8 MiB | |
Load Address: a0008000 | |
Entry Point: a0008000 | |
Verifying Checksum ... OK | |
Loading Kernel Image ... OK | |
OK | |
prepare atags | |
Starting kernel ... | |
Uncompressing Linux... done, booting the kernel. | |
[ 0.000000] Linux version 3.0.8 (luchunyong@lcy-mint64-vm) (gcc version 4.3.2 (crosstool-NG 1.19.0) ) #1 Wed Dec 2 10:17:33 CST 2020 | |
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f | |
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache | |
[ 0.000000] Machine: FH8852 | |
[ 0.000000] Memory policy: ECC disabled, Data cache writeback | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 17780 | |
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=192.168.1.203 mem=70M mtdparts=spi_flash:64k(bootstrap),64k(uboot-env),192k(uboot),3M(kernel),512k(data),4288k(app),3M(kernel1),4288k() | |
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | |
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Memory: 70MB = 70MB total | |
[ 0.000000] Memory: 65904k/65904k available, 5776k reserved, 0K highmem | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) | |
[ 0.000000] vmalloc : 0xc4800000 - 0xfe000000 ( 920 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xc4600000 ( 70 MB) | |
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
[ 0.000000] .init : 0xc0008000 - 0xc00f2000 ( 936 kB) | |
[ 0.000000] .text : 0xc00f2000 - 0xc04a6000 (3792 kB) | |
[ 0.000000] .data : 0xc04a6000 - 0xc04c7580 ( 134 kB) | |
[ 0.000000] .bss : 0xc04c75a4 - 0xc04f0624 ( 165 kB) | |
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] NR_IRQS:128 | |
[ 0.000000] timer mult: 0xfa000000, timer shift: 0x16 | |
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms | |
[ 0.000000] Console: colour dummy device 80x30 | |
[ 0.000000] console [ttyS0] enabled | |
[ 0.179323] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) | |
[ 0.240035] pid_max: default: 32768 minimum: 301 | |
[ 0.244631] Mount-cache hash table entries: 512 | |
[ 0.249377] CPU: Testing write buffer coherency: ok | |
[ 0.253924] hw perfevents: enabled with v6 PMU driver, 3 counters available | |
[ 0.261416] devtmpfs: initialized | |
[ 0.266667] NET: Registered protocol family 16 | |
[ 0.271339] FH8856 board init | |
[ 0.279233] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. | |
[ 0.283205] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
[ 0.352207] bio: create slab <bio-0> at 0 | |
[ 0.356296] fh_dmac fh_dmac.0: FH DMA Controller, 6 channels | |
[ 0.361566] usbcore: registered new interface driver usbfs | |
[ 0.365182] usbcore: registered new interface driver hub | |
[ 0.370375] usbcore: registered new device driver usb | |
[ 0.378735] cfg80211: Calling CRDA to update world regulatory domain | |
[ 0.384457] Switching to clocksource fh_clocksource | |
[ 0.424692] NET: Registered protocol family 2 | |
[ 0.426341] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.433459] TCP established hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.440192] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.446476] TCP: Hash tables configured (established 4096 bind 4096) | |
[ 0.452741] TCP reno registered | |
[ 0.455844] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.461663] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.468138] NET: Registered protocol family 1 | |
[ 0.472644] RPC: Registered named UNIX socket transport module. | |
[ 0.478034] RPC: Registered udp transport module. | |
[ 0.482743] RPC: Registered tcp transport module. | |
[ 0.487363] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.894952] JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc. | |
[ 0.907445] exFAT: Version 1.2.9 | |
[ 0.910643] msgmni has been set to 128 | |
[ 0.922402] NET: Registered protocol family 38 | |
[ 0.924034] io scheduler noop registered (default) | |
[ 0.942794] ttyS.0: ttyS0 at MMIO 0xf0700000 (irq = 30) is a ttyS | |
[ 0.950794] ttyS.1: ttyS1 at MMIO 0xf0800000 (irq = 31) is a ttyS | |
[ 0.970751] brd: module loaded | |
[ 1.043422] loop: module loaded | |
[ 1.069792] CLK misc driver init successfully | |
[ 1.100737] m25p80 spi0.0: unrecognized JEDEC id 207018 | |
[ 1.103340] m25p80 spi0.0: Try default128 | |
[ 1.107711] m25p80 spi0.0: found default128, expected m25p80 | |
[ 1.113943] m25p80 spi0.0: set_qe : 235 default not support multi wire.. | |
[ 1.121329] m25p80 spi0.0: default128 (16384 Kbytes) | |
[ 1.126717] DEBUG-CMDLINE-PART: parsing <64k(bootstrap),64k(uboot-env),192k(uboot),3M(kernel),512k(data),4288k(app),3M(kernel1),4288k(app1)> | |
[ 1.140524] DEBUG-CMDLINE-PART: partition 7: name <app1>, offset ffffffff, size 430000, mask flags 0 | |
[ 1.150494] DEBUG-CMDLINE-PART: partition 6: name <kernel1>, offset ffffffff, size 300000, mask flags 0 | |
[ 1.160755] DEBUG-CMDLINE-PART: partition 5: name <app>, offset ffffffff, size 430000, mask flags 0 | |
[ 1.170650] DEBUG-CMDLINE-PART: partition 4: name <data>, offset ffffffff, size 80000, mask flags 0 | |
[ 1.180525] DEBUG-CMDLINE-PART: partition 3: name <kernel>, offset ffffffff, size 300000, mask flags 0 | |
[ 1.190692] DEBUG-CMDLINE-PART: partition 2: name <uboot>, offset ffffffff, size 30000, mask flags 0 | |
[ 1.200671] DEBUG-CMDLINE-PART: partition 1: name <uboot-env>, offset ffffffff, size 10000, mask flags 0 | |
[ 1.211030] DEBUG-CMDLINE-PART: partition 0: name <bootstrap>, offset ffffffff, size 10000, mask flags 0 | |
[ 1.221388] DEBUG-CMDLINE-PART: mtdid=<spi_flash> num_parts=<8> | |
[ 1.227845] 8 cmdlinepart partitions found on MTD device spi_flash | |
[ 1.234607] Creating 8 MTD partitions on "spi_flash": | |
[ 1.240110] 0x000000000000-0x000000010000 : "bootstrap" | |
[ 1.264948] 0x000000010000-0x000000020000 : "uboot-env" | |
[ 1.285521] 0x000000020000-0x000000050000 : "uboot" | |
[ 1.305685] 0x000000050000-0x000000350000 : "kernel" | |
[ 1.325973] 0x000000350000-0x0000003d0000 : "data" | |
[ 1.346026] 0x0000003d0000-0x000000800000 : "app" | |
[ 1.366110] 0x000000800000-0x000000b00000 : "kernel1" | |
[ 1.386579] 0x000000b00000-0x000000f30000 : "app1" | |
[ 1.437021] console [netcon0] enabled | |
[ 1.437907] netconsole: network logging started | |
[ 1.446789] resource: start=e0700000, len=00100000 | |
[ 1.448974] base=0xc4a00000 (after adjust) | |
[ 1.453527] fh_otg_driver_probe: mapped PA 0xe0700000 to VA 0xc4a00000 | |
[ 1.679721] Core Release: 4.00a | |
[ 1.680043] Setting default values for core params | |
[ 1.884766] dma_enable :1 | |
[ 1.884789] dma_desc_enable :1 | |
[ 2.087346] Using Descriptor DMA mode | |
[ 2.088234] Periodic Transfer Interrupt Enhancement - disabled | |
[ 2.094617] Multiprocessor Interrupt Enhancement - disabled | |
[ 2.100701] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
[ 2.105438] FH OTG HCD INIT (c437b580) | |
[ 2.109527] hcd regs before base(c4a00000) | |
[ 2.114046] fh_otg fh_otg: FH OTG Controller | |
[ 2.118701] fh_otg fh_otg: new USB bus registered, assigned bus number 1 | |
[ 2.126045] ______ here 21 reg=c4a00000 addr= c436c200 | |
[ 2.131606] fh_otg fh_otg: irq 27, io mem 0x00000000 | |
[ 2.137017] Init: Power Port (0) | |
[ 2.140623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 2.147924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.155836] usb usb1: Product: FH OTG Controller | |
[ 2.160866] usb usb1: Manufacturer: Linux 3.0.8 fh_otg_hcd | |
[ 2.166832] usb usb1: SerialNumber: fh_otg | |
[ 2.176746] hub 1-0:1.0: USB hub found | |
[ 2.177764] hub 1-0:1.0: 1 port detected | |
[ 2.217040] rtc core busy can't get time | |
[ 2.218225] rtc get time:rtc core busy 310 | |
[ 2.230833] fh_rtc fh_rtc.0: rtc core: registered rtc as rtc0 | |
[ 2.238988] i2c /dev entries driver | |
[ 2.244154] I2C driver: | |
[ 2.244170] platform registration... | |
[ 2.247666] Clock: 50000khz, Standard-mode HCNT:LCNT = 212:249 | |
[ 2.254321] tx fifo depth: 16, rx fifo depth: 16 | |
[ 2.268193] I2C - (dev. name: fh_i2c - id: 0, IRQ #11 | |
[ 2.268207] IO base addr: 0xc48a8000) | |
[ 2.274963] I2C driver: | |
[ 2.274976] platform registration... | |
[ 2.281527] Clock: 50000khz, Standard-mode HCNT:LCNT = 212:249 | |
[ 2.288099] tx fifo depth: 16, rx fifo depth: 16 | |
[ 2.310733] I2C - (dev. name: fh_i2c - id: 1, IRQ #12 | |
[ 2.310747] IO base addr: 0xc48b0000) | |
[ 2.343675] card0 disconnected! | |
[ 2.357864] TCP cubic registered | |
[ 2.358286] NET: Registered protocol family 17 | |
[ 2.363207] lib80211: common routines for IEEE802.11 drivers | |
[ 2.369325] Registering the dns_resolver key type | |
[ 2.374513] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 | |
[ 2.416220] GMAC driver: | |
[ 2.416235] platform registration... | |
[ 2.419861] using random MAC address: b6:69:6d:a7:e3:4e | |
[ 2.436582] fh_gmac fh_gmac.0: eth0: mixed HW and IP checksum settings. | |
[ 2.440753] fh_gmac fh_gmac.0: eth0: mixed no checksumming and other settings. | |
[ 2.448752] eth0 - (dev. name: fh_gmac - id: 0, IRQ #15 | |
[ 2.448765] IO base addr: 0xc48d0000) | |
[ 2.464994] fh rtc get time error | |
[ 2.465534] fh_rtc fh_rtc.0: setting system clock to 2059-09-19 08:04:03 UTC (2831184243) | |
[ 2.482153] aes driver registered | |
[ 2.656747] gmac_rmii: probed | |
[ 2.656879] eth0: MII BUS or phydev is NULL | |
[ 2.662069] IP-Config: Failed to open eth0 | |
[ 2.665909] IP-Config: No network devices available. | |
[ 2.679563] Freeing init memory: 936K | |
starting pid 519, tty '': '/etc/init.d/rcS' | |
[RCS]: /etc/init.d/S01udev | |
Starting udev: [ OK ] | |
[RCS]: /etc/init.d/S02init_rootfs | |
[RCS]: /etc/init.d/S03network | |
[RCS]: /etc/init.d/S04app | |
Replace /usr/bin/noodles v8.5 with /app/abin/noodles v9.1 | |
Replace /usr/bin/img_up v7.5 with /app/bin/img_up v8.3 | |
Replace /usr/bin/fw_printenv v1.2 with /app/bin/fw_printenv v1.8 | |
============================================= | |
Kernel version : 3.0.8 | |
SDK version : FH8856_IPC_V1.1.0_20190125 | |
patch:FH8856_IPC_V1.1.0.FP61_20201126 | |
Model name : EF1002_UNI | |
FW version : V1.2.001-00-210128-18:40 | |
============================================= | |
Sat Jan 1 00:00:00 CST 2000 | |
vmm with 58304K | |
insmod /app/modules/vmm.ko mmz=anonymous,0,0xa4600000,58304K anony=1 | |
[ 4.600533] Video Memory Manager | |
insmod /app/modules/rtvbus.ko ra=0xa7ef0000 rs=65536 fn=rtthread_arc.bin fa=0xa7f00000 | |
[ 4.970387] [RTVBUS] version: V1.1.0.P40(g52e9f5a),build: 2020-04-21 | |
[ 4.973890] load rtthread_arc.bin at 0xa7f00000, set ring buffer at 0xa7ef0000 with size 0x10000 | |
[ 4.982673] get irq offset: 0 | |
[ 4.986963] chn0 dev nr: 252 | |
[ 5.001050] VBus loaded: 255 in blocks, 255 out blocks | |
[ 5.003328] VBUS driver loaded. | |
[ 5.006441] VBUS load rtthread_arc.bin for rtvbus | |
[ 5.038278] firmware: rtthread_arc.bin loaded | |
[ 5.039886] firmware: rtthread_arc.bin started | |
[ 5.044231] ARC is running. | |
insmod /app/modules/media_process.ko | |
[ 5.076394] media_process: module license 'Proprietary' taints kernel. | |
[ 5.080063] Disabling lock debugging due to kernel taint | |
[ 5.108087] [MEDIA]media_process_module_init 276: media process init success!! | |
insmod /app/modules/isp.ko | |
[ 5.148628] module->phys_addr=0xe8400000 module->virt_addr=0xc4c00000 | |
[ 5.152434] isp - (dev. name: ispp - IRQ #7 | |
[ 5.152445] IO base addr: 0xc4c00000) | |
[ 5.160473] module->phys_addr=0xe8500000 module->virt_addr=0xc4e00000 | |
[ 5.167012] isp - (dev. name: ispf - IRQ #8 | |
[ 5.167023] IO base addr: 0xc4e00000) | |
[ 5.175036] | |
[ 5.175042] stat buffer size: 68KBytes | |
insmod /app/modules/vpu.ko | |
[ 5.244140] [VPU]vpu_module_init 727: vpu init success!! | |
insmod /app/modules/enc.ko | |
[ 5.360745] [ENC]pae_module_init 327: PAE init success! | |
insmod /app/modules/hevc.ko | |
[ 5.514276] [HEVC]hevc_module_init 226: HEVC init success! | |
insmod /app/modules/jpeg.ko | |
[ 5.558627] [JPEG]jpeg_module_init 190: JPEG init success! | |
insmod /app/modules/bgm.ko | |
[ 5.594188] [BGM]bgm_module_init 495: bgm init success!! | |
insmod /app/modules/vbus_ac.ko | |
[ 5.620350] ACW_VBUS version: V1.1.0-RC3(ga6aaaaa) | |
insmod /app/modules/gpio_wave.ko GW_TIMER_INTERVAL=100 | |
[ 5.645959] gpiowave_init | |
[ 5.645990] params: | |
[ 5.647808] timeout 100 | |
[ 5.650226] groupnum 2 | |
[ 5.671139] gpiowave_probe | |
[ 5.689303] gpiowave_probe | |
[ 5.711572] gpiowave_probe | |
insmod /app/modules/ipv6.ko | |
[ 5.879595] NET: Registered protocol family 10 | |
ls: /dev/mmcblk*: No such file or directory | |
sensor_probe(v3.0): auto probe sensor | |
gc4653_mipi | |
echo "cap_0_2560_1440" > /proc/driver/vpu | |
echo "cap_1_740_416" > /proc/driver/vpu | |
echo "buf_0_3" > /proc/driver/vpu | |
echo "buf_1_3" > /proc/driver/vpu | |
echo "sublimit_off" > /proc/driver/vpu | |
[ut_cmd_server_init, line:115] INFO: cmd server init ok: #sh_server | |
echo "stm_2359296" > /proc/driver/enc | |
echo "stm_2359296" > /proc/driver/hevc | |
echo "usebfrm_0" > /proc/driver/hevc | |
echo "cir_on" > /proc/driver/isp | |
echo "wdr_off" > /proc/driver/isp | |
echo "sublimit_off" > /proc/driver/isp | |
echo "ispp_two_buff" > /proc/driver/isp | |
[ 8.544771] gmac_rmii: probed | |
[ 8.545202] eth0: PHY ID 937c4023 at 0 IRQ -1 (0:00) active | |
[ 8.550724] fh_gmac fh_gmac.0: eth0: mixed HW and IP checksum settings. | |
[ 8.557025] fh_gmac fh_gmac.0: eth0: mixed no checksumming and other settings. | |
eth0 plugged | |
Run netcfg: eth0 | |
srv_system[udhcpc -p /var/lock/udhcpc_eth0.pid -t 30 -T 1 -b -s /usr/share/udhcpc/default.script -i eth0 &] | |
exec cmd: "udhcpc -p /var/lock/udhcpc_eth0.pid -t 30 -T 1 -b -s /usr/share/udhcpc/default.script -i eth0 &" | |
ret=0 WIFEXITED(ret)=1 WEXITSTATUS(ret)=0 | |
set eth0 dns 114.114.114.114 | |
set eth0 dns 8.8.8.8 | |
ls: /dev/mmcblk*: No such file or directory | |
rm: can't remove '/app/userdata/perror': No such file or directory | |
starting pid 902, tty '': '/sbin/inetd -f -e /etc/inetd.conf' | |
udhcpc (v1.19.3) started | |
Please press Enter to activate this console. DIR is /mnt/sd/log_EF1002 | |
Setting IP address 0.0.0.0 on eth0 | |
@@@@@@@@@@ NOODLES v9.1 START @@@@@@@@@@@@@@@@@ | |
eth0 unplugged | |
Received SIGTERM | |
srv_system[echo CST-8 > /etc/TZ] | |
exec cmd: "echo CST-8 > /etc/TZ" | |
ret=0 WIFEXITED(ret)=1 WEXITSTATUS(ret)=0 | |
[ 10.881589] [wdt] set topval: 5 | |
[ 11.184565] gpiowave_open | |
@@@@@@@@@@@@@@@@@ MainApp START @@@@@@@@@@@@@@@@@ | |
ver:YGT.EF1002_UNI-V1.2.001-00-210128-18:40 | |
[apl_net_init, line:61] WARNING: YG MPTool not supported | |
mask_count:0 | |
Set timezone="CST-8", daylight="false" | |
Set TZ=PST-8:00 | |
app_system[echo CST-8 > /etc/TZ] | |
remote sytem: cmd="echo CST-8 > /etc/TZ", result="0" | |
Create timer: apl_timer_watchdog | |
[apl_watchdog_open, line:83] INFO: Enable watchdog | |
telnetd stopped | |
ftpd stopped | |
enter 2008 | |
set service avbuf_size=1048576 | |
Set sensor: gc4653_mipi | |
Set sensor width: 2560 | |
Set sensor height: 1440 | |
enter 2017 | |
[dsp] version: V1.1.0.P46(g26d1d0d),build: 2020-05-29 | |
>>>>>>RTC: write 1618293928 | |
!!!FH_SYS_Init ok | |
[gpio_ldr_val]0 | |
[gpio_irc_val]0 | |
[gpio_ircon]2 | |
[gpio_ircoff]3 | |
[gpio_network]0 | |
[gpio_infrared_val]0 | |
[gpio_infrared]5 | |
[gpio_white_light_val]0 | |
[gpio_white_light]6 | |
[gpio_signal]51 | |
[gpio_ao_mute_val]1 | |
[gpio_ao_mute]19 | |
[gpio_sensor_reset]13 | |
NETWORK: 0 | |
ptz_init_delay= 0 | |
[audio_vol]22 | |
[audio_micvol]2 | |
[audio_outvol]31 | |
[ai_period]320 | |
[ao_period]320 | |
[audio_fullduplex_enable]0 | |
[audio_in]MIC | |
[audio_out]LINE | |
[sadc_ldr]0 | |
[motion_sensitivity]30 | |
g_service_light_region[0] = [2147483647,2000,] | |
g_service_light_region[1] = [2500,0,] | |
>>>>>>>>>>>>>>>>>>>>>>>>ldr_region(): [-1,100,day],[425,0,night] | |
g_service_ldr_positive = 1 | |
g_service_ldr_region[0] = [2147483647,100,day] | |
g_service_ldr_region[1] = [425,0,night] | |
service_jpeg_init | |
jpg cfg[0]: chan[0] disabled | |
jpg cfg[1]: chan[1] resize_mode[2] qp[76] speed[4] buf_limit[-1] | |
jpg buffer limit size: 65536 | |
enter 2022 | |
!!!FH_VPSS_SetViAttr ok . width = 2560, height = 1440 | |
!!!FH_VPSS_Enable ok | |
[seven] sdk format[50] = 602 | |
isp_check_format:width=25[TEE2]CARD is not writeable | |
srv_system[echo cbf1offset_0_3 > /proc/driver/hevc] | |
exec cmd: "echo cbf1offset_0_3 > /proc/driver/hevc" | |
ret=0 WIFEXITED(ret)=1 WEXITSTATUS(ret)=0 | |
srv_system[echo iplambda_0_100_100 > /proc/driver/hevc] | |
exec cmd: "echo iplambda_0_100_100 > /proc/driver/hevc" | |
ret=0 WIFEXITED(ret)=1 WEXITSTATUS(ret)=0 | |
process '/sbin/inetd -f -e /etc/inetd.conf' (pid 902) exited. Scheduling for restart. | |
starting pid 967, tty '': '/sbin/inetd -f -e /etc/inetd.conf' | |
[ 11.836988] get fd: 21, prio: 20 | |
60, height=1440, framerate=20.000000, sensor format=1538(0x00000602) | |
[isp] version: V1.1.0.P60(g91ecd26),build: 2020-11-26 | |
[ispcore] version: V1.1.0.P58(g200673b),build: 2020-11-06 | |
ADV_ISP version: V1.1.0.P61(g4e9112d), build: 2020-11-26 | |
probe sensor: gc4653_mipi | |
[sensor_gpios] not defined! | |
mipi version: V1.1.0-RC3(gdae664b) | |
[sensor_gpios] not defined! | |
!!!API_ISP_Init ok | |
!!!FHAdv_Isp_Init ok | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=0, style=0 | |
isp param version is not compitable with current setting! | |
g_service_bus_ircut 1 | |
night_light_on = 0 | |
[_service_bus_light_ctrl, line:815] INFO: g_service_night_light_on = 0, g_service_white_light = -1 | |
---?.??.-?.??.???.?.??-??.????.??.--- | |
service_venc_start_org<0>: { width<2560>height<1440>fr<20.000000>rc<1>level<250>bitrate<1331200>keyinv<60>smart<0>} | |
[_service_venc_start, line:1583] INFO: FH_NORMAL_H265 | |
[_service_venc_start, line:1758] INFO: FH_RC_H265_AVBR | |
FH_START_CHANNEL<0>: { width<2560>height<1440>fr<20.000000>rc<1>level<250>bitrate<1331200:lv 0>keyinv<60>} | |
!!!FH_VPSS_SetChnAttr<0> ok | |
!!!FH_VPSS_OpenChn<0> ok | |
!!!FH_VPSS_SetFramectrl<0> ok | |
!!!FH_VENC_CreateChn<0> ok | |
===================================================================================== | |
FH_VENC_CHN_CONFIG: chn 0 | |
chn_attr.enc_type=FH_NORMAL_H265 | |
chn_attr.h265_attr.profile=H265_PROFILE_MAIN | |
chn_attr.h265_attr.i_frame_intterval=60 | |
chn_attr.h265_attr.size.u32Width=2560 | |
chn_attr.h265_attr.size.u32Height=1440 | |
rc_attr.enc_type=FH_RC_H265_AVBR | |
rc_attr.h265_avbr.init_qp=38 | |
rc_attr.h265_avbr.bitrate=1198080 | |
rc_attr.h265_avbr.IminQP=31 | |
rc_attr.h265_avbr.ImaxQP=50 | |
rc_attr.h265_avbr.PminQP=33 | |
rc_attr.h265_avbr.PmaxQP=50 | |
rc_attr.h265_avbr.FrameRate.frame_count=2000 | |
rc_attr.h265_avbr.FrameRate.frame_time=100 | |
rc_attr.h265_avbr.maxrate_percent=110 | |
rc_attr.h265_avbr.IFrmMaxBits=0 | |
rc_attr.h265_avbr.IP_QPDelta=0 | |
rc_attr.h265_avbr.I_BitProp=5 | |
rc_attr.h265_avbr.P_BitProp=1 | |
rc_attr.h265_avbr.fluctuate_level=0 | |
rc_attr.h265_avbr.stillrate_percent=30 | |
rc_attr.h265_avbr.maxstillqp=38 | |
===================================================================================== | |
!!!FH_VENC_SetChnAttr<0> ok | |
!!!FH_VENC_StartRecvPic<0> ok | |
!!!FH_SYS_BindVpu2Enc<0> ok!!!!!!!!!!!!!! | |
FH_VPSS_SetScalerCoeff(0,9) | |
app_system[echo cbf1offset_0_3 > /proc/driver/hevc] | |
remote sytem: cmd="echo cbf1offset_0_3 > /proc/driver/hevc", result="0" | |
app_system[echo iplambda_0_100_100 > /proc/driver/hevc] | |
remote sytem: cmd="echo iplambda_0_100_100 > /proc/driver/hevc", result="0" | |
service_venc_start_org<1>: { width<640>height<360>fr<20.000000>rc<1>level<250>bitrate<393216>keyinv<60>smart<0>} | |
[_service_venc_start, line:1583] INFO: FH_NORMAL_H265 | |
[_service_venc_start, line:1758] INFO: FH_RC_H265_AVBR | |
FH_START_CHANNEL<1>: { width<640>height<360>fr<20.000000>rc<1>level<250>bitrate<393216:lv 0>keyinv<60>} | |
!!!FH_VPSS_SetChnAttr<1> ok | |
!!!FH_VPSS_OpenChn<1> ok | |
!!!FH_VPSS_SetFramectrl<1> ok | |
!!!FH_VENC_CreateChn<1> ok | |
===================================================================================== | |
FH_VENC_CHN_CONFIG: chn 1 | |
chn_attr.enc_type=FH_NORMAL_H265 | |
chn_attr.h265_attr.profile=H265_PROFILE_MAIN | |
chn_attr.h265_attr.i_frame_intterval=60 | |
chn_attr.h265_attr.size.u32Width=640 | |
chn_attr.h265_attr.size.u32Height=360 | |
rc_attr.enc_type=FH_RC_H265_AVBR | |
rc_attr.h265_avbr.init_qp=20 | |
rc_attr.h265_avbr.bitrate=353894 | |
rc_attr.h265_avbr.IminQP=17 | |
rc_attr.h265_avbr.ImaxQP=40 | |
rc_attr.h265_avbr.PminQP=17 | |
rc_attr.h265_avbr.PmaxQP=40 | |
rc_attr.h265_avbr.FrameRate.frame_count=2000 | |
rc_attr.h265_avbr.FrameRate.frame_time=100 | |
rc_attr.h265_avbr.maxrate_percent=110 | |
rc_attr.h265_avbr.IFrmMaxBits=0 | |
rc_attr.h265_avbr.IP_QPDelta=3 | |
rc_attr.h265_avbr.I_BitProp=5 | |
rc_attr.h265_avbr.P_BitProp=1 | |
rc_attr.h265_avbr.fluctuate_level=0 | |
rc_attr.h265_avbr.stillrate_percent=50 | |
rc_attr.h265_avbr.maxstillqp=30 | |
===================================================================================== | |
!!!FH_VENC_SetChnAttr<1> ok | |
!!!FH_VENC_StartRecvPic<1> ok | |
!!!FH_SYS_BindVpu2Enc<1> ok!!!!!!!!!!!!!! | |
FH_VPSS_SetScalerCoeff(1,2) | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=0, style=0 | |
isp param version is not compitable with current setting! | |
Get brightness: val<100> | |
Get contrast: mode<1>, val<76> | |
Get saturation: mode<1>, val<90> | |
Get sharpness: mode<1>, val<13> | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=0, style=4 | |
isp param version is not compitable with current setting! | |
Get brightness: val<80> | |
Get contrast: mode<1>, val<76> | |
Get saturation: mode<1>, val<90> | |
Get sharpness: mode<1>, val<8> | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=1, style=0 | |
isp param version is not compitable with current setting! | |
Get brightness: val<100> | |
Get contrast: mode<1>, val<102> | |
Get saturation: mode<1>, val<0> | |
Get sharpness: mode<1>, val<12> | |
Set scene: day, style: 0 | |
[service_vp_set_scene, line:1721] INFO: service_vp_set_ircut = 1 | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=0, style=0 | |
isp param version is not compitable with current setting! | |
===========AP_SET_FRAME_HEIGH, value=2250, maxDiff=5 | |
service_vp_get_default_ae max = 2245, UpMax = 1, min= 4 | |
AC version: V1.1.0-RC3(ga6aaaaa) | |
FH_AC_Init ok | |
FH_AC_Set_Config ok | |
FH_AC_AI_Enable ok | |
FH_AC_AI_SetVol ok | |
enter 2028 | |
jpeg_capa:1 | |
jpeg_capa:1 | |
service_jpeg_config chan 1, w 640, h 384 | |
enter 2033 | |
osd profile 0 width: 2560, height: 1440 | |
osd profile 1 width: 640, height: 368 | |
osd set form 0 | |
osd set form 1 | |
osd set form 2 | |
osd set form 3 | |
Create timer: osd_refresh_timer | |
[apl_record_init, line:148] -------------apl record init, record version 2.0------------- | |
[zj_init, line:2270] | |
zj_light_update: light = -1 | |
[apl_netctrl_init, line:207] apl_netctrl_init: | |
[apl_netctrl_init, line:208] if_eth:eth0 | |
[apl_netctrl_init, line:209] eth_select:1 | |
[apl_netctrl_init, line:210] eth_pluged:-1 | |
[apl_netctrl_init, line:211] eth_active:0 | |
[apl_netctrl_init, line:212] eth_enable:1 | |
[apl_netctrl_init, line:214] if_wlan:(null) | |
[apl_netctrl_init, line:215] if_ap:(null) | |
>>>>>>>>>>>>>>>>>>apl audio play init!!!! | |
ai_pause 0 | |
ao_pause 1 | |
depth<16>samplerate<8000> | |
FH_AC_AO_Disable ok | |
[apl_netctrl_thread, line:896] eth plug off!!! | |
FH_AC_Set_Config ok | |
FH_AC_AO_Enable ok | |
[service_ao_frame_reset, line:446] INFO: service_ao_frame_reset 640, 10 | |
APL_SHOWSTAT_WELCOME | |
[apl_dec_active_cell, line:590] INFO: begin | |
ActiveCell:"z/8=" | |
packbits: len=2 | |
[0x00366E80]: cf ff | |
unpackbits: len=50 | |
[0x40127C10]: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | |
[0x40127C20]: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | |
[0x40127C30]: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | |
[0x40127C40]: ff ff | |
[apl_dec_active_cell, line:600] INFO: end | |
g_service_md_sensitivity = 50 | |
Human detect disable | |
apl_human_detect_area md | |
[apl_set_md_type, line:150] INFO: human detect venc:1, if_save_jpeg:0 | |
found human model :/app/hdt_model/model_human_77403532.bin | |
found human model :/app/hdt_model/model_human_86185422.bin | |
found human model :/app/hdt_model/model_human_86185770.bin | |
load model_file: /app/hdt_model/model_human_77403532.bin | |
>>>>>>>> play audio file: /app/wav/welcome.wav | |
ao_pause 0 | |
load model_file: /app/hdt_model/model_human_86185422.bin | |
load model_file: /app/hdt_model/model_human_86185770.bin | |
---------------------------------- | |
detectMode 0 | |
maxScaleNum 40 | |
slideStep 2 | |
perScaleRate 128 | |
rotateAngle 0 | |
---------------------------------- | |
g_config.use_frame :0 | |
fhobjdetect 0.5.11 | |
objdetect 0.7.11fhimgprocess 0.4.11 | |
imgprocess 0.6.2 | |
fhgvbus 0.3.13 | |
apl_human_detect_area md | |
human_threshold<headshoulder>=23 | |
model_id:86185422, thresh:23 | |
human_threshold<person>=45 | |
model_id:86185770, thresh:45 | |
human_threshold<face>=35 | |
model_id:77403532, thresh:35 | |
=============== set md type 5===== | |
Human detect enable | |
Create timer: apl_monitor_time_change | |
Create timer: apl_monitor_check_imaging_setting | |
Create timer: apl_monitor_drv_proc | |
white = 0 | |
[service_vp_set_ldr_mode, line:708] INFO: service_vp_set_ldr_mode:0 | |
Before setting brightness: val<100> | |
Set brightness: val<100> | |
Before setting contrast: mode<1>, val<76> | |
Set contrast: mode<1>, val<76> | |
Before setting saturation: mode<1>, val<90> | |
Set saturation: mode<1>, val<90> | |
Before setting sharpness: mode<1>, val<13> | |
Set sharpness: mode<1>, val<13> | |
Set exposure: ae_mode<0>,ae_time<4000>,ae_gain<0> | |
set exposure time: max: 100000.000000, min: 3.000000 | |
Set exposure max min time: ae_mode<0>,ae_max_time<100000>,ae_min_time<3> | |
u16WndHeight:2250,s32Tmp:68 | |
in set default min intt:4 | |
min intt 4 | |
in set default max intt:2245 | |
max intt 2245 | |
in g_default_sensor_up:1, set max_up:1 | |
new intt = 62, new sensor gain = 64 | |
Set IrCutFilter: 2 | |
Set white balance: 0 | |
Error: not supported yet | |
[apl_set_rotate_mirror_flip, line:673] INFO: rotate=0, mirror=1, flip=1 | |
!!!FH_VENC_StopRecvPic<0> ok,time<32> | |
!!!FH_VENC_StopRecvPic<1> ok,time<19> | |
Set mirror/flip: mirror<1>,flip<1> | |
ao_pause 1 | |
!!!FH_VENC_StartRecvPic<0> ok | |
!!!FH_VENC_StartRecvPic<1> ok | |
[ut_cmd_server_init, line:115] INFO: cmd server init ok: @cmd_server | |
apl_set_product_event_callback registered[zj_start, line:3594] | |
version=V2.2.001-00-210125 | |
key[DeviceSn] origin value | |
val=, plain text, not base 64 encode | |
key[DevKey] origin value | |
val=, plain text, not base 64 encode | |
OTA omit version check=no | |
04-13 14:05:29(1176982736) cos INFO: [Cos_SysInit:62]Cos init ok | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_InitCamerMng:37]camera Init ok | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_InitDeviceMng:24]cfg_device Init Ok | |
04-13 14:05:29(1180378320) cos INFO: [Cos_ThreadProc:175]thread[Cos_InetMgr]:0x399910 , threadid:1180378320 start ok | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1002 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:734]load systerm file {"Sign":"1390","CtrlType":"0","TimeZone":"0","SetZoneFlag":"0","ChargeFlag":"0","CTEI":"","PuType":"0","PuAddr":"htt} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:742]load core file {"Sign":"656","AbilityUpFlag":"0","BussUpFlag":"0","DevUpFlag":"1","CamUpFlag":"1","TimerUpFlag":"0","AlarmUpFlag":"1",} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:750]load device file {"Sign":"12","EncAbility":"0","OTAAbility":"7","WifiSetAbility":"25","EnergyType":"0","AwakeAbility":"0","Powersupply} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:758]load camera file {"Sign":"1404","StreamCount":"2","VoicePlayAbility":"1","MicroPhoneAbility":"1","OSDSetAbility":"1","IRRedAbility":"1} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:766]load InIot file {"Sign":"1390","PTZAbility":"0","AttachPTZAbility":"1","PTZSpeedAbility":"0","MotionAbility":"1","DoorbellAbility":"0"} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1013 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1005 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1000 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1009 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1014 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1007 0] | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatInnerIotDevice:256]InIot add new Iot[1011 0] | |
04-13 14:05:29(1176982736) cos ERR: [Cos_FileLoad:131]file open pucFileName:./userdata/ZJCONF/config/iothubcfg.db | |
04-13 14:05:29(1176982736) cos ERR: [Cos_FileLoad:131]file open pucFileName:./userdata/ZJCONF/config/timepolicy.db | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:790]load alarm policy {"Sign":"1390","Policys":[{"AIIoTType":"1000","AIIoTID":"0","OpenFlag":"1","PolicyName":"MOTION","PolicyID":"100","W} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatAlarmPolicyNode:60]alarm policy add new policyid 100 | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_SetAlarmPolicyProp:148]alarm policy set policyid 100 prop {"Motion":{"Sensitive":"80","Status":"1","Interval":"60","ActiveTime":"0"},"Human":{"Sens} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatAlarmEventNode:105]alarm policyid 100 add new event 0 | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_FindAndCreatAlarmEventNode:105]alarm policyid 100 add new event 1 | |
04-13 14:05:29(1176982736) cos ERR: [Cos_FileLoad:131]file open pucFileName:./userdata/ZJCONF/config/groupcfg.db | |
04-13 14:05:29(1176982736) cos ERR: [Cos_FileLoad:131]file open pucFileName:./userdata/ZJCONF/config/ptzcfg.db | |
04-13 14:05:29(1176982736) cos ERR: [Cos_FileLoad:131]file open pucFileName:./userdata/ZJCONF/config/servsetcfg.db | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_LoadFile:824]load Cloud File inf {"AESVI":"0000000000000000","AppKey":"600982120","AppSecret":"e804cbebb0d81e61e40d026680227794","CloudId":"","Clou} | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_Task_Init:62]cfg task init ok msg queue 0x36d430 | |
04-13 14:05:29(1176982736) TRAS_TASK INFO: [Tras_Malloc_SockBuf:26]malloc socket buff cnt 10 | |
04-13 14:05:29(1176982736) ALIVE_TASK INFO: [TrasBase_GetBase:37]trasbase init ok | |
04-13 14:05:29(1176982736) TRAS_TASK INFO: [Tras_Malloc_SockBuf:26]malloc socket buff cnt 14 | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[HttpThread]:0x370638 create OK | |
04-13 14:05:29(1176982736) TRAS_HTTP INFO: [Tras_Httpclient_Init:160]Httpclient Initialize success! | |
04-13 14:05:29(1176982736) ALIVE_TASK INFO: [TrasLive_TaskInit:35]alive task init ok | |
04-13 14:05:29(1176982736) IOT_TASK INFO: [AiIot_init:36]init ok msg queue 0x370050 | |
04-13 14:05:29(1182495952) cos INFO: [Cos_ThreadProc:175]thread[HttpThread]:0x370638 , threadid:1182495952 start ok | |
04-13 14:05:29(1176982736) MD_CACHE INFO: [Md_VideoInit:57]media video init | |
04-13 14:05:29(1176982736) MD_CACHE INFO: [Md_AuidoInit:52]audio init ok | |
04-13 14:05:29(1176982736) CMD_TASK INFO: [Cmd_Task_Init:44]msg queue 0x383750 | |
04-13 14:05:29(1176982736) RF_TASK INFO: [Rf_Init:85]rf task Init ok msg queueu 0x36f178 | |
04-13 14:05:29(1176982736) IO_TASK INFO: [Li_Init:24]init ok | |
04-13 14:05:29(1176982736) MD_MP4_MUXER INFO: [Md_Mp4Muxer_Init:47]mp4 muxer init ok | |
04-13 14:05:29(1176982736) MD_MP4 INFO: [Md_Mp4DeMuxer_Init:40]mp4 demuxer init ok | |
04-13 14:05:29(1176982736) RD_TASK INFO: [Rd_Init:186]record task init | |
04-13 14:05:29(1176982736) SNAP_TASK INFO: [Sn_Init:1033]Snap init task done msg queue 0x36ed70 | |
04-13 14:05:29(1176982736) EVENT INFO: [Event_Init:835]Event init task ok msg queue 0x3839a8 | |
04-13 14:05:29(1176982736) CLOUD_TASK INFO: [Cloud_ResInit:41]cloud res init ok | |
04-13 14:05:29(1176982736) CLOUD_TASK INFO: [Cloud_Init:619]cloud task init ok | |
04-13 14:05:29(1176982736) LOG_TASK INFO: [Log_Init:41]init ok | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_SetAlarmPlatAddr:102]cfg_system set AlarmPlatAddr https://ehome.21cn.com | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_Init:94]zj task init ok | |
04-13 14:05:29(1176982736) cos INFO: [Cos_SysSetDeviceAbility:124]set device ability 0 | |
devmodel = EF1002_V2.0[11] | |
version = YGT.EF1002_UNI-V2.2.001-00-210125[33] | |
>>>WARNING: NO CTEIIDWARNING: NO DeviceSn or DevKey! | |
warning: no appid found! | |
[apl_cloud_cmd_on_set_auto_track_enable, line:2114] INFO: trace:0 | |
capstr = [lt] | |
>>ptz = 0, rdflag=0, lense=0, flight=0, light2=1, light3=0<< | |
[sensor_gpios] not defined! | |
audio duplex=no | |
id 0: w = 2560, h= 1440, fps = 20.000000, bitrate = 1331200 | |
real: 1331200->translate to: 9 | |
[0]res: 128, width: 2560, height: 1440 | |
id 1: w = 640, h= 360, fps = 20.000000, bitrate = 393216 | |
real: 393216->translate to: 5 | |
[1]res: 1, width: 640, height: 360 | |
#######audio type=EN_ZJ_AUDIOENC_TYPE_G711A########### | |
will describe device | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_AddIoTDevice:20]add iot 1000 0 out func (nil) | |
describe_json: {"Motion":{"Sensitive":"50","Status":"0","Interval":"60"},"Human":{"Sensitive":"50","Status":"0","Interval":"60"},"Face":{"Sensitive":"50","Status":"0","Interval":"60"}} | |
ZJ_AddIoTDevice(type 1009, id 0, NULL, NULL, NULL, zj_on_iot_set_output 0xc1d7c, NULL, NULL); | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_AddIoTDevice:20]add iot 1009 0 out func 0xc1d7c | |
describe_json: {"Status":"1"} | |
ZJ_AddIoTDevice(type 1014, id 0, NULL, NULL, NULL, zj_on_iot_set_output 0xc1d7c, NULL, NULL); | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_AddIoTDevice:20]add iot 1014 0 out func 0xc1d7c | |
describe_json: {"IrcutType":"2"} | |
ZJ_AddIoTDevice(type 1007, id 0, NULL, NULL, NULL, zj_on_iot_set_output 0xc1d7c, NULL, NULL); | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_AddIoTDevice:20]add iot 1007 0 out func 0xc1d7c | |
describe_json: {} | |
#######called apl_netctrl_set_snapshot_parse_callback | |
will call ZJ_Start at 12768ms | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_SetDefaultRecordProp:452]already set default record prop | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[cfg_task]:0x3841e0 create OK | |
04-13 14:05:29(1176982736) CFG_TASK INFO: [Cfg_Task_Start:102]cfg task start version[linux_linux_202101281823_svn 18310] | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[AIIOT_TASK]:0x384990 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[cmd_task]:0x384a60 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[RF_TASK]:0x384b48 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[localio_task]:0x384c18 create OK | |
04-13 14:05:29(1176982736) IO_TASK INFO: [Li_Start:52]task start ok | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[TrasBaseProcThread]:0x383f20 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[TrasBaseSendThread]:0x385130 create OK | |
[0]prevk 0x41df7cb8, 15148 > 0 | |
audio_enable=0, cam_enable=1 | |
04-13 14:05:29(1187955920) cos INFO: [Cos_ThreadProc:175]thread[cfg_task]:0x3841e0 , threadid:1187955920 start ok | |
04-13 14:05:29(1187955920) CFG_TASK INFO: [Cfg_BuildSystemJson:249]build system json {"Sign":"2319","CtrlType":"0","TimeZone":"0","SetZoneFlag":"0","ChargeFlag":"0","CTEI":"","PuType":"0","PuAdd} | |
04-13 14:05:29(1190692048) cos INFO: [Cos_ThreadProc:175]thread[AIIOT_TASK]:0x384990 , threadid:1190692048 start ok | |
04-13 14:05:29(1190692048) IOT_TASK INFO: [Aiiot_ProcAddPlugMsg:1091]add iot device 1000 0 | |
04-13 14:05:29(1193362640) cos INFO: [Cos_ThreadProc:175]thread[cmd_task]:0x384a60 , threadid:1193362640 start ok | |
04-13 14:05:29(1195979984) cos INFO: [Cos_ThreadProc:175]thread[RF_TASK]:0x384b48 , threadid:1195979984 start ok | |
04-13 14:05:29(1198666960) cos INFO: [Cos_ThreadProc:175]thread[localio_task]:0x384c18 , threadid:1198666960 start ok | |
04-13 14:05:29(1198666960) SNAP_TASK INFO: [Sn_IoRestart:993]Snap io restart ok,set path : | |
04-13 14:05:29(1198666960) EVENT INFO: [Event_IoReStart:703]Event io restart ok,set path : | |
04-13 14:05:29(1200846032) cos INFO: [Cos_ThreadProc:175]thread[TrasBaseProcThread]:0x383f20 , threadid:1200846032 start ok | |
04-13 14:05:29(1203721424) cos INFO: [Cos_ThreadProc:175]thread[TrasBaseSendThread]:0x385130 , threadid:1203721424 start ok | |
04-13 14:05:29(1205941456) cos INFO: [Cos_ThreadProc:175]thread[TunnelRecvThread]:0x385200 , threadid:1205941456 start ok | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[TunnelRecvThread]:0x385200 create OK | |
04-13 14:05:29(1176982736) TRAS_TASK INFO: [TrasBase_StartThread:360]Tras start threads running success | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[CloudMng]:0x387340 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[cloud res]:0x387410 create OK | |
04-13 14:05:29(1176982736) CLOUD_TASK INFO: [Cloud_ResStart:86]cloud res start ok | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[CloudChan]:0x3874e0 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[CloudExChan]:0x3875b0 create OK | |
04-13 14:05:29(1176982736) CLOUD_TASK INFO: [Cloud_Start:803]cloud task start ok | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[report_task]:0x387200 create OK | |
04-13 14:05:29(1176982736) cos INFO: [Cos_ThreadCreate:80]thread[loG_task]:0x387c70 create OK | |
04-13 14:05:29(1176982736) LOG_TASK INFO: [Log_Start:70]task start ok | |
04-13 14:05:29(1176982736) ZJ_TASK INFO: [ZJ_Start:329]zj task start ok | |
return from ZJ_Start by 12802ms | |
return from zj_ota_init | |
04-13 14:05:29(1187955920) CFG_TASK INFO: [Cfg_BuildCameraJson:789]build camera info {"Sign":"2333","StreamCount":"2","VoicePlayAbility":"1","MicroPhoneAbility":"1","OSDSetAbility":"1","IRRedAbi} | |
04-13 14:05:29(1187955920) CFG_TASK INFO: [Cfg_BuildInnerIotJson:763]build inIot info {"Sign":"2319","PTZAbility":"0","AttachPTZAbility":"1","PTZSpeedAbility":"0","MotionAbility":"1","DoorbellAb} | |
04-13 14:05:29(1216873680) cos INFO: [Cos_ThreadProc:175]thread[CloudExChan]:0x3875b0 , threadid:1216873680 start ok | |
04-13 14:05:29(1219667152) cos INFO: [Cos_ThreadProc:175]thread[report_task]:0x387200 , threadid:1219667152 start ok | |
04-13 14:05:29(1222440144) cos INFO: [Cos_ThreadProc:175]thread[loG_task]:0x387c70 , threadid:1222440144 start ok | |
04-13 14:05:29(1214080208) cos INFO: [Cos_ThreadProc:175]thread[CloudChan]:0x3874e0 , threadid:1214080208 start ok | |
04-13 14:05:29(1211942096) cos INFO: [Cos_ThreadProc:175]thread[cloud res]:0x387410 , threadid:1211942096 start ok | |
04-13 14:05:29(1209058512) cos INFO: [Cos_ThreadProc:175]thread[CloudMng]:0x387340 , threadid:1209058512 start ok | |
04-13 14:05:29(1190692048) IOT_TASK INFO: [Aiiot_ProcAddPlugMsg:1091]add iot device 1009 0 | |
04-13 14:05:29(1187955920) CFG_TASK INFO: [Cfg_BuildIotPolicyJson:794]build alarm policy info {"Sign":"2319","Policys":[{"AIIoTType":"1000","AIIoTID":"0","OpenFlag":"1","PolicyName":"MOTION","Po} | |
[zj_set_image_direction, line:2636] | |
[zj_on_iot_set_output, line:925] | |
[1007]zj_on_iot_set_output: {"CtrlType":"0"} | |
light= 0, duration= 43200 | |
run to 988 | |
priv->white_light set to 0 | |
zj_light_update: light = -2 | |
[zj_output_lamp, line:884] | |
call zj_inner_led_set(type=2, lighton=0, duration=43200) | |
run to zj_inner_led_set 2201 | |
run to zj_inner_led_set 2210 | |
run to ap_cloud_cmd_proc 949 | |
run to ap_cloud_cmd_proc 953 | |
zj_light_ctrl, type: 0, state: 0, duration: 43200 | |
lightup_at_night = 0 | |
04-13 14:05:29(1187955920) CFG_TASK INFO: [Cfg_Task_ProcFirstNtyFlag:919]set irMode EN_ZJ_IRMODE_AUTO | |
[zj_on_iot_set_output, line:925] | |
[1014]zj_on_iot_set_output: {"CtrlType":"0"} | |
zj_light_update: light = -2 | |
[zj_set_ir_mode, line:1191] | |
[zj_set_ir_mode:1202] EN_ZJ_IRMODE_AUTO | |
zj_set_ir_mode run to 1250 | |
apl_set_light_mode: called by 0xc2358, light_mode=1 | |
[apl_set_light_mode, line:934] INFO: ligh_mode = 1 | |
971: g_light_state=0 | |
04-13 14:05:29(1190692048) IOT_TASK INFO: [Aiiot_ProcAddPlugMsg:1091]add iot device 1014 0 | |
04-13 14:05:30(1190692048) IOT_TASK INFO: [Aiiot_ProcAddPlugMsg:1091]add iot device 1007 0 | |
Create timer: service_event_uio_timer_proc | |
MD version: V1.1.0.P61(g4e9112d), build: 2020-11-26 | |
threshold<130>framedelay<3> | |
ADV_SMARTIR version: V1.1.0.P61(g4e9112d), build: 2020-11-26 | |
FHAdv_SmartIR_Init success | |
gainDay2Night:0x400,gainNight2Day:0x280,lumaDay2Night:0x250,lumaNight2Day:0x450 | |
thL:0xb1, thH:0x91 | |
Custom_offset:0x80, recoverFrm:0x8ca0 | |
[event_thread2_proc, line:158] WARNING: slight_region day is not defined!! | |
[event_thread2_proc, line:161] WARNING: slight_region night is not defined!! | |
04-13 14:05:30(1190692048) IOT_TASK INFO: [Aiiot_ProcAlarmPolicyStatus:759]iot 1000 0 status turn to start | |
[zj_on_iot_start, line:761] | |
[zj_on_iot_set_prop, line:665] | |
#####zj_on_iot_set_prop value={"Motion":{"Sensitive":"80","Status":"1","Interval":"60","ActiveTime":"0"},"Human":{"Sensitive":"80","Status":"1","Interval":"60","ActiveTime":"0"}} | |
zj_on_iot_set_prop enter 710 | |
model_id:86185770, thresh:41 | |
zj_on_iot_set_prop enter 720 | |
zj_on_iot_set_prop enter 724 | |
04-13 14:05:30(1190692048) CFG_TASK INFO: [Cfg_SetInIotWorkStatus:681]inIot set iot [1000 0] workstatus 1 | |
04-13 14:05:30(1190692048) IOT_TASK INFO: [AiIot_ProcPlugStatus:288]iot 1000 0 start ok | |
04-13 14:05:30(1190692048) RD_TASK INFO: [Rd_FindAndCreateNode:250]cam 0 create node | |
04-13 14:05:30(1190692048) RD_TASK INFO: [Rd_SetAllDayRecordFlag:385]cam 0 set all day record flag 1 | |
night_light_on = 1 | |
[_service_bus_light_ctrl, line:815] INFO: g_service_night_light_on = 1, g_service_white_light = 0 | |
Before setting saturation: mode<1>, val<90> | |
Set saturation: mode<1>, val<1> | |
After setting saturation: mode<1>, val<1> | |
---?.??.-?.??.???.?.??-??.????.??.--- | |
zj_light_update: light = -1 | |
SERVICE_EVENT_DARKLEVEL : dark_level_param<night> | |
SERVICE_EVENT_LIGHTSWITHING : isday<0> | |
APL_EVENT_IMAGE_CHANGED | |
>>>>>APL_EVENT_IMAGE_CHANGED:: lightup_at_night = 0, g_daylight=0 | |
===> APL_MSG:: name=MSGID_LIGHT_SWITCH, id=0x00001001, para0=0x00000000, para1=0x00000000, para2=0x00000000, para3=0x00000000, buf_size=32 | |
apl_ipc_light_switch_ = [night] | |
light switch level: night | |
apl_set_scene: scene=1, style=0 | |
Set scene: night, style: 0 | |
[service_vp_set_scene, line:1721] INFO: service_vp_set_ircut = 0 | |
g_service_bus_ircut 0 | |
[service_load_scene_hex, line:119] INFO: Get sensor data ok: scene=1, style=0 | |
isp param version is not compitable with current setting! | |
[sensor lib]notice change fps 20.000000 to 12.000000 | |
===========AP_SET_FRAME_HEIGH, value=3950, maxDiff=5 | |
service_vp_get_default_ae max = 3945, UpMax = 0, min= 4 | |
[service_vp_set_ldr_mode, line:708] INFO: service_vp_set_ldr_mode:0 | |
Before setting brightness: val<100> | |
Set brightness: val<100> | |
Before setting contrast: mode<1>, val<102> | |
Set contrast: mode<1>, val<102> | |
Before setting saturation: mode<1>, val<0> | |
Set saturation: mode<1>, val<0> | |
Before setting sharpness: mode<1>, val<12> | |
Set sharpness: mode<1>, val<12> | |
Set exposure: ae_mode<0>,ae_time<4000>,ae_gain<0> | |
set exposure time: max: 100000.000000, min: 3.000000 | |
Set exposure max min time: ae_mode<0>,ae_max_time<100000>,ae_min_time<3> | |
u16WndHeight:3950,s32Tmp:119 | |
in set default min intt:4 | |
min intt 4 | |
in set default max intt:3945 | |
max intt 3945 | |
new intt = 25, new sensor gain = 64 | |
Set IrCutFilter: 2 | |
Set white balance: 0 | |
Error: not supported yet | |
[apl_set_rotate_mirror_flip, line:673] INFO: rotate=0, mirror=1, flip=1 | |
!!!FH_VENC_StopRecvPic<0> ok,time<16> | |
!!!FH_VENC_StopRecvPic<1> ok,time<0> | |
Set mirror/flip: mirror<1>,flip<1> | |
!!!FH_VENC_StartRecvPic<0> ok | |
!!!FH_VENC_StartRecvPic<1> ok | |
===> APL_MSG:: name=MSGID_VSRC_FRAMERATE_CHANGE, id=0x00001023, para0=0x00030d40, para1=0x0001d4c0, para2=0x00000000, para3=0x00000000, buf_size=0 | |
sensor vsrc fps change: 20.00 ==> 12.00 | |
===> APL_MSG:: name=MSGID_SCENE_CHANGE, id=0x00001022, para0=0x00000000, para1=0x00000001, para2=0x00000000, para3=0x00000000, buf_size=0 | |
scene change: DAY ==> NIGHT | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
[net_print_ip_log, line:733] eth0 ip: 0.0.0.0 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
[net_print_ip_log, line:733] eth0 ip: 0.0.0.0 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
>>>>>>RTC: write 1618293988 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
[net_print_ip_log, line:733] eth0 ip: 0.0.0.0 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
[net_print_ip_log, line:733] eth0 ip: 0.0.0.0 | |
zj_light_update: light = 0 | |
audio_enable=0, cam_enable=1 | |
>>>>>>RTC: write 1618294048 | |
audio_enable=0, cam_enable=1 | |
zj_light_update: light = 0 | |
audio_enable=0, | |
starting pid 903, tty '/dev/ttyS0': '/usr/bin/login.sh' | |
(none) login: | |
process '/usr/bin/login.sh' (pid 903) exited. Scheduling for restart. | |
Please press Enter to activate this console. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment