- Ubuntu コミュニティが配布しているオフィシャルイメージPre-Installed OMAP/OMAP4 Images
- Robert Nelsonの OMAPデモイメージrcn-ee.com
Beagleboard Rev.C4の場合、Texas Instruments OMAP3 preinstalled desktop imageを使用
ubuntu-11.10-preinstalled-desktop-armel+omap.img.gz
Pandaboardの場合は同ページにあるomap4版を使用する
Linuxでの操作 dmesg でSDカードが /dev/sdX のどのXに割り当てられるかを確認後、
$ sudo sh -c 'zcat ./ubuntu-11.10-preinstalled-desktop-armel+omap.img.gz |dd bs=4M of=/dev/sdX ; sync'
SDカードを指してUser1 ボタンを押しながらReset
BeagleBoard Rev.C4の場合 U-bootの環境設定を行う必要がある. PandaBoardはそのままBootするので必要なし
$ setenv bootcmd 'mmc init;fatload mmc 0 0x82000000 boot.scr;source 0x82000000'; setenv autostart yes; saveenv; boot