This guide is unmaintained and was created for a specific workshop in 2017. It remains as a legacy reference. Use at your own risk.
Workshop Instructor:
- Lilly Ryan @attacus_au
This workshop is distributed under a CC BY-SA 4.0 license.
#!/bin/bash | |
#~/bin/upnpPortMapper.sh | |
#sudo apt-get install miniupnpc | |
#crontab -l | grep upnp || echo $(crontab -l ; echo '*/5 * * * * ~/bin/upnpPortMapper.sh >/dev/null 2>&1') | crontab - | |
export LC_ALL=C | |
router=$(ip r | grep default | cut -d " " -f 3) | |
gateway=$(upnpc -l | grep "desc: http://$router:[0-9]*/rootDesc.xml" | cut -d " " -f 3) | |
ip=$(upnpc -l | grep "Local LAN ip address" | cut -d: -f2) |
This guide is unmaintained and was created for a specific workshop in 2017. It remains as a legacy reference. Use at your own risk.
Workshop Instructor:
This workshop is distributed under a CC BY-SA 4.0 license.
#undef HID_ENABLED | |
// Arduino Due ADC->DMA->USB 1MSPS | |
// by stimmer | |
// from http://forum.arduino.cc/index.php?topic=137635.msg1136315#msg1136315 | |
// Input: Analog in A0 | |
// Output: Raw stream of uint16_t in range 0-4095 on Native USB Serial/ACM | |
// on linux, to stop the OS cooking your data: | |
// stty -F /dev/ttyACM0 raw -iexten -echo -echoe -echok -echoctl -echoke -onlcr |