- Read the fan speed mode:
ipmitool -H <IP> -U <USER> -P <PASSWD> raw 0x30 0x45 0x00
The values are:
- Standard: 0
- Full: 1
- Optimal: 2
- Heavy IO: 4
- Set fan mode to "full"
ipmitool -H <IP> -U <USER> -P <PASSWD> raw 0x30 0x45 0x01 0x01
- Force force PXE boot EFI to all future boots (persistent).
ipmitool -H <IP> -U <USER> -P <PASSWD> raw 0x0 0x8 0x05 0xe0 0x04 0x0 0x0 0x0
- What is the IPMI raw command to get the BIOS version?
ipmitool -I lanplus -H IP U ADMIN -P ADMIN raw 0x30 0xAC 0x00 0x00 | xxd -r -p
# The output will need to convert from Hex to ASCII. This command will work using X10 or later BMC firmware.
- Get the LAN1 MAC Address
ipmitool raw 0x30 0x21
- Get onboard LAN MAC Address (start from 2nd).
ipmitool raw 0x30 0x9f
@noslin005 Thank you for these commands. A couple points: