Created
August 31, 2019 19:05
-
-
Save mirao/30c026ee119de72a6cd8c12617d7d7f3 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Mode details: https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules | |
Reading symbols from /home/mira/workspace/stm32f4discovery/stm32cube-virtualCOMPort/.pio/build/disco_f407vg/firmware.elf... | |
done. | |
PlatformIO Unified Debugger -> http://bit.ly/pio-debug | |
PlatformIO: debug_tool = stlink | |
PlatformIO: Initializing remote target... | |
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:18) | |
Licensed under GNU GPL v2 | |
For bug reports, read | |
http://openocd.org/doc/doxygen/bugs.html | |
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD | |
adapter speed: 2000 kHz | |
adapter_nsrst_delay: 100 | |
none separate | |
srst_only separate srst_nogate srst_open_drain connect_deassert_srst | |
Info : tcl server disabled | |
Info : telnet server disabled | |
Info : clock speed 2000 kHz | |
Info : STLINK V2J34M25 (API v2) VID:PID 0483:374B | |
Info : Target voltage: 2.887920 | |
Info : stm32f4x.cpu: hardware has 6 breakpoints, 4 watchpoints | |
Info : accepting 'gdb' connection from pipe | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x41000000 pc: 0x08000930 msp: 0x2001ffc0 | |
Info : device id = 0x10076413 | |
Info : flash size = 1024 kbytes | |
Info : flash size = 512 bytes | |
0x08000930 in main () at Src/main.c:124 | |
124 } else if (BSP_PB_GetState(BUTTON_KEY) == GPIO_PIN_RESET && lastPushButtonState == GPIO_PIN_SET) { | |
Temporary breakpoint 1 at 0x80008c4: file Src/main.c, line 75. | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz | |
adapter speed: 1800 kHz | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
Info : Unable to match requested speed 8000 kHz, using 4000 kHz | |
Info : Unable to match requested speed 8000 kHz, using 4000 kHz | |
adapter speed: 4000 kHz | |
Loading section .isr_vector, size 0x188 lma 0x8000000 | |
Loading section .text, size 0x45d4 lma 0x8000188 | |
Loading section .rodata, size 0x1e0 lma 0x800475c | |
Loading section .ARM, size 0x8 lma 0x800493c | |
Loading section .init_array, size 0x4 lma 0x8004944 | |
Loading section .fini_array, size 0x4 lma 0x8004948 | |
Loading section .data, size 0x360 lma 0x800494c | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
Start address 0x80046f0, load size 19628 | |
Transfer rate: 17 KB/sec, 2453 bytes/write. | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz | |
adapter speed: 1800 kHz | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
target halted due to debug-request, current mode: Thread | |
xPSR: 0x01000000 pc: 0x080046f0 msp: 0x20020000 | |
PlatformIO: Initialization completed | |
PlatformIO: Resume the execution to `debug_init_break = tbreak main` | |
PlatformIO: More configuration options -> http://bit.ly/pio-debug | |
Note: automatically using hardware breakpoints for read-only addresses. | |
Temporary breakpoint 1, main () at Src/main.c:75 | |
75 int main(void) { | |
pio_reset_target | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
Info : Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
Unable to match requested speed 2000 kHz, using 1800 kHz | |
adapter speed: 1800 kHz |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment