Last active
January 4, 2021 10:34
-
-
Save mgarratt/6004a44e53ec38f33888bcfaa122911e to your computer and use it in GitHub Desktop.
Cura Ender-5 Start/End G-code
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
;Begin Custom End G-code | |
G91 ;Relative positioning | |
G1 E-2 F2700 ;Retract a bit | |
G1 E-2 Z0.2 F2400 ;Retract and raise Z | |
G1 X5 Y5 F3000 ;Wipe out | |
G1 Z10 ;Raise Z more | |
G90 ;Absolute positionning | |
G1 X220 Y220 ;Present print | |
M106 S0 ;Turn-off fan | |
M104 S0 ;Turn-off hotend | |
M140 S0 ;Turn-off bed | |
M84 X Y E ;Disable all steppers but Z | |
M117 Print Complete! | |
;End Custom End G-code |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
;Begin Custom Start G-code | |
M117 Home & level | |
G28 ;Home | |
G29 ;Auto-level | |
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration | |
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate | |
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration | |
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk | |
M220 S100 ;Reset Feedrate | |
M221 S100 ;Reset Flowrate | |
M140 S{material_bed_temperature} ;Start heating bed | |
M104 S150 ;Get the extruder warm while the bed heats | |
M190 S{material_bed_temperature} ;Wait for bed to reach temp before proceeding | |
M104 S{material_print_temperature} ;Fully heat extruder | |
M109 S{material_print_temperature} ;Wait for extruder to reach temp before proceeding | |
M117 Nozzle clean | |
G92 E0 ;Reset Extruder | |
G1 Z2.0 F3000 ;Move Z Axis up | |
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position | |
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line | |
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little | |
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line | |
G92 E0 ;Reset Extruder | |
G1 E-1 F500 ;Retract 1 mm | |
G1 X80 F9000 ;Sweep right to cut any strings | |
G1 Z2.0 F3000 ;Move Z Axis up | |
G92 E0 ;Reset Extruder | |
;End Custom Start G-code |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment