I hereby claim:
- I am maz3max on github.
- I am mazemax (https://keybase.io/mazemax) on keybase.
- I have a public key whose fingerprint is A6EF 4612 2FF3 66D9 F0B9 F65F AEF4 9AEC EFEC 21A6
To claim this, I am signing this object:
[mcu] | |
serial: /dev/ttyAMA0 | |
baud: 125000 | |
restart_method: command | |
[printer] | |
kinematics: delta | |
max_velocity: 300 | |
max_accel: 3000 | |
max_z_velocity: 150 |
# Anycubic delta kossel Plus klipper config file (copy it to ~/printer.cfg) | |
# correct USB port | |
# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT | |
# FIRST. Incorrectly configured parameters may cause damage. | |
# Z height probe. One may define this section to enable Z height | |
# probing hardware. When this section is enabled, PROBE and | |
# QUERY_PROBE extended g-code commands become available. The probe | |
# section also creates a virtual probe:z_virtual_endstop pin. One may | |
# set the stepper_z endstop_pin to this virtual pin on cartesian style |
pcb2gcode --metric --front *-F.Cu.gbr --back *-B.Cu.gbr --outline *-Edge.Cuts.gbr --drill *-PTH.drl --zwork -0.3000 --mill-feed 100 --mill-speed 15000 --voronoi --vectorial --zdrill -2.5000 --zchange 30.0000 --drill-feed 400 --drill-side auto --drill-speed 15000 --milldrill --nog81 --cutter-diameter 1.0000 --fill-outline --bridges 0.5000 --bridgesnum 5 --zbridges -0.6000 --zcut -2.5000 --zsafe 2.0000 --cut-feed 610 --cut-speed 20000 --cut-infeed 10.0000 --optimise --metricoutput --zero-start |
# | |
# /etc/makepkg.conf | |
# | |
######################################################################### | |
# SOURCE ACQUISITION | |
######################################################################### | |
# | |
#-- The download utilities that makepkg should use to acquire sources | |
# Format: 'protocol::agent' |
I hereby claim:
To claim this, I am signing this object: