Created
January 10, 2022 04:00
-
-
Save kissste/ace1f054531b273af86d152af08bf5dd to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sagemcom F@ast 5250 (Fast 5250) Boot | |
Firmware version: SG9F11000E (8a.37.5.2) | |
Serial port, 115200N8 | |
Primary boot with ubi support | |
Version: 5.18.0.2-Bonding-256M (Oct 2 2014 - 09:50:40) | |
Copyright (C) 2011 - 2013 Sagemcom All rights reserved | |
gpio in: fe87fffd | |
board type: f5250bc (00010090) | |
board frequency: 000001f4 | |
nand ctrl (b909804c) 04060506 19050505 | |
ddr ctrl (b9100000) f624079e 22163424 c6001842 00000018 0000000d | |
ddr ctrl (b9108118) 01004342 00000301 | |
Secondary boot | |
Version: 5.18.0 (Oct 2 2014 - 09:50:39) | |
Copyright (C) 2011 - 2013 Sagemcom All rights reserved | |
board type: 00010090 | |
boot partition size: 08000000 | |
executing raw u-boot | |
U-Boot 2010.09 | |
Version: 5.18.0-small (Oct 02 2014 - 09:50:15) | |
Copyright (C) 2011 - 2013 Sagemcom All rights reserved | |
board type: 00010090 | |
boot partition size: 08000000 | |
CPU: IKANOS Fusiv 185 Family, Major Revision: 2 | |
HOST MIPS Clock: 500 MHz | |
AP Clock: 500 MHz | |
DDR: 250 MHz | |
BME MIPS Clock: 400 MHz | |
AFE CLK MODE: Single Ended | |
DRAM: 256 MiB | |
NAND: 128 MiB | |
Creating 1 MTD partitions on "nand0": | |
0x0000000c0000-0x000008000000 : "mtd=2" | |
UBI: attaching mtd1 to ubi0 | |
UBI: physical eraseblock size: 131072 bytes (128 KiB) | |
UBI: logical eraseblock size: 126976 bytes | |
UBI: smallest flash I/O unit: 2048 | |
UBI: VID header offset: 2048 (aligned 2048) | |
UBI: data offset: 4096 | |
UBI: attached mtd1 to ubi0 | |
UBI: MTD device name: "mtd=2" | |
UBI: MTD device size: 127 MiB | |
UBI: number of good PEBs: 1018 | |
UBI: number of bad PEBs: 0 | |
UBI: max. allowed volumes: 128 | |
UBI: wear-leveling threshold: 256 | |
UBI: number of internal volumes: 1 | |
UBI: number of user volumes: 8 | |
UBI: available PEBs: 373 | |
UBI: total number of reserved PEBs: 645 | |
UBI: number of PEBs reserved for bad PEB handling: 10 | |
UBI: max/mean erase counter: 963/909 | |
bootenv volume not found | |
using default environment | |
Found switch QCA8337rev11 | |
Net: emac1 | |
Hit any key to stop autoboot: 0 | |
sb3: sb3_sagem_init() | |
sb3: action: 1007 | |
sb3: sb3_wait_for_magic() | |
magic = D | |
sb3: action: 1002 | |
sb3: sb3_boot( operational ) | |
sb3: top available addr 0x8f930000, ram available = 0xf530000 | |
sb3_load_ubivol: max_load_size=257097728 | |
Volume operational found at volume id 4, used_bytes=20062208 | |
read 20062208 bytes from volume 4 to 80400000(buf address) | |
UBI: fixable bit-flip detected at PEB 98:4096 | |
UBI: schedule PEB 98 for scrubbing | |
sb3: image operational moved to 8e610000-8f932000 | |
gsdf ident string OK | |
gsdf size OK | |
gsdf auth_hash OK | |
sb3: image operational has gsdf format | |
gsdf ident string OK | |
gsdf size OK | |
gsdf auth_hash OK | |
found a root CA certificate in section 0 | |
found a secondary certificate in section 1 | |
certificate chain OK | |
root certificate OK (sagemcom caCert) | |
signature OK | |
section list OK | |
gsdf head_hash OK | |
gsdf data_hash OK | |
sb3: image operational signature OK | |
sb3: No pre-boot commands | |
sb3: setting kernel args | |
bootm 8E62F000 | |
## Booting kernel from Legacy Image at 8e62f000 ... | |
Image Name: scOS SG9F11000E (8a.37.5.2) | |
Created: 2018-12-20 7:41:58 UTC | |
Image Type: MIPS Linux Kernel Image (gzip compressed) | |
Data Size: 1638400 Bytes = 1.6 MiB | |
Load Address: 80010000 | |
Entry Point: 800142f0 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
Starting kernel ... | |
Linux version 2.6.28.8 (g361098@compil-atr-2) (gcc version 4.2.4) #1 PREEMPT Thu Dec 20 08:41:43 CET 2018 | |
argc 14 arg <NULL> env memsize=256 | |
memsize board_memsize = 256 | |
env memsize=256 | |
initrd_start 80000000 | |
env initrd_start=0xA0000000 | |
initrd_size start 80000000 end 80000000 | |
env initrd_size=0x0 | |
flash_start 0 | |
env flash_start=0x00000000 | |
board_flash_size ffff062a | |
env flash_size=0xFFFF062A | |
env ethaddr=00:01:02:03:04:05 | |
arg[1] root=mtd:rootfs | |
arg[2] init=/etc/preinit | |
arg[3] ro | |
arg[4] rootfstype=squashfs | |
arg[5] console=ttyS0,115200 | |
arg[6] rootfs_offset=0x001b2000 | |
arg[7] rootfs_size=0x01170000 | |
arg[8] mtdparts=nand:128k(fboot),640k(reserved),-(partAll) | |
arg[9] ubi.mtd=ubi | |
arg[10] part_main=partAll | |
arg[11] part_boot=partAll | |
arg[12] image_ubivol=operational | |
arg[13] board_type=00010090 | |
Fusiv MIPS Clock = 500000000 System Clock = 250000000 | |
CPU revision is: 00019554 (MIPS 34Kc) | |
Determined physical RAM map: | |
memory: 0f800000 @ 00000000 (usable) | |
Initrd not found or empty - disabling initrd | |
Zone PFN ranges: | |
Normal 0x00000000 -> 0x0000f800 | |
Movable zone start PFN for each node | |
early_node_map[1] active PFN ranges | |
0: 0x00000000 -> 0x0000f800 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62992 | |
Kernel command line: root=mtd:rootfs init=/etc/preinit ro rootfstype=squashfs console=ttyS0,115200 rootfs_offset=0x001b2000 rootfs_size=0x01170000 | |
UBI image volume: "operational" | |
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
Writing ErrCtl register=00008000 | |
Readback ErrCtl register=00008000 | |
Initializing IPC.. | |
PID hash table entries: 1024 (order: 10, 4096 bytes) | |
console [ttyS0] enabled | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 247364k/253952k available (2618k kernel code, 6252k reserved, 615k data, 156k init, 0k highmem) | |
Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976) | |
Mount-cache hash table entries: 512 | |
net_namespace: 692 bytes | |
SgDbg -> Initialize ... <6>Ok | |
NET: Registered protocol family 16 | |
PCIE Block Reset 1 | |
PCIE Block Reset 2 | |
Changing the MPLL Prescale Value for External Clock Mode | |
GPIO19/22 Peripheral Reset | |
Fusiv PCIe RC0 Starting ... | |
PCIe RC0 Link Up !!!! | |
registering PCI controller with io_map_base unset | |
Fusiv PCIe RC1 Starting ... | |
PCIe RC1 Link Up !!!! | |
registering PCI controller with io_map_base unset | |
pci 0001:01:00.0: PME# supported from D0 D1 D3hot | |
pci 0001:01:00.0: PME# disabled | |
Bluetooth: Core ver 2.13 | |
NET: Registered protocol family 31 | |
Bluetooth: HCI device and connection manager initialized | |
Bluetooth: HCI socket layer initialized | |
NET: Registered protocol family 8 | |
NET: Registered protocol family 20 | |
NET: Registered protocol family 2 | |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
TCP bind hash table entries: 8192 (order: 3, 32768 bytes) | |
TCP: Hash tables configured (established 8192 bind 8192) | |
TCP reno registered | |
NET: Registered protocol family 1 | |
squashfs: version 3.4 (2008/08/26) Phillip Lougher | |
squashfs: LZMA suppport for slax.org by jro | |
Registering unionfs 2.5.2 (for 2.6.28.10) | |
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
fuse init (API version 7.10) | |
msgmni has been set to 483 | |
alg: No test for stdrng (krng) | |
io scheduler noop registered (default) | |
Serial: 8250/16550 driver2 ports, IRQ sharing disabled | |
serial8250: ttyS0 at MMIO 0xb9010000 (irq = 28) is a 16450 | |
serial8250: ttyS1 at MMIO 0xb9018000 (irq = 29) is a 16450 | |
brd: module loaded | |
PPP generic driver version 2.4.2 | |
NET: Registered protocol family 24 | |
tun: Universal TUN/TAP device driver, 1.6 | |
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
VX185 On-Chip NAND FLash Controller Driver, Version 1.2 (c) 2010 Ikanos, Inc. | |
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron NAND 128MiB 3,3V 8-bit) | |
Scanning device for bad blocks | |
Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit": | |
0x00000000-0x000c0000 : "ipl" | |
0x000c0000-0x08000000 : "ubi" | |
UBI: attaching mtd1 to ubi0 | |
UBI: physical eraseblock size: 131072 bytes (128 KiB) | |
UBI: logical eraseblock size: 126976 bytes | |
UBI: smallest flash I/O unit: 2048 | |
UBI: VID header offset: 2048 (aligned 2048) | |
UBI: data offset: 4096 | |
Add UBI volume partitions: name=secondaryboot | |
Add UBI volume partitions: name=uboot | |
Add UBI volume partitions: name=permanent_param | |
Add UBI volume partitions: name=rescue | |
Add UBI volume partitions: name=operational | |
reating 3 MTD partitions on "operational": | |
0x00000000-0x0001f000 : "firm_header" | |
0x0001f000-0x001d1000 : "kernel" | |
0x001b2000-0x01322000 : "rootfs" | |
Add UBI volume partitions: name=caldata | |
Add UBI volume partitions: name=filesystem1 | |
Add UBI volume partitions: name=gui | |
Creating 2 MTD partitions on "gui": | |
0x00000000-0x0001f000 : "gui_header" | |
mtd: partition "gui_header" is out of reach -- disabled | |
0x00000000-0x00000000 : "guifs" | |
mtd: partition "guifs" is out of reach -- disabled | |
UBI: attached mtd1 to ubi0 | |
UBI: MTD device name: "ubi" | |
UBI: MTD device size: 127 MiB | |
UBI: number of good PEBs: 1018 | |
UBI: number of bad PEBs: 0 | |
UBI: max. allowed volumes: 128 | |
UBI: wear-leveling threshold: 256 | |
UBI: number of internal volumes: 1 | |
UBI: number of user volumes: 8 | |
UBI: available PEBs: 373 | |
UBI: total number of reserved PEBs: 645 | |
UBI: number of PEBs reserved for bad PEB handling: 10 | |
UBI: max/mean erase counter: 963/909 | |
UBI: background thread "ubi_bgt0d" started, PID 180 | |
Bluetooth: HCI UART driver ver 2.2 | |
Bluetooth: HCI BCSP protocol initialized | |
ip_tables: (C) 2000-2006 Netfilter Core Team | |
TCP cubic registered | |
NET: Registered protocol family 17 | |
Bridge firewalling registered | |
Ebtables v2.0 registered | |
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> | |
All bugs added by David S. Miller <davem@redhat.com> | |
VFS: Mounted root (squashfs filesystem) readonly. | |
Freeing unused kernel memory: 156k freed | |
Warning: unable to open an initial console. | |
- preinit - | |
- regular preinit - | |
- init - | |
UBIFS: recovery needed | |
UBIFS: recovery completed | |
UBIFS: mounted UBI device 0, volume 6, name "filesystem1" | |
UBIFS: file system size: 6983680 bytes (6820 KiB, 6 MiB, 55 LEBs) | |
UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) | |
UBIFS: media format: 4 (latest is 4) | |
UBIFS: default compressor: LZO | |
UBIFS: reserved for root: 345139 bytes (337 KiB) | |
unionfs: new lower inode mtime (bindex=1, name=tmp) | |
[HAL-BSP]: kSysButtonManaged[39]: WARNING -> Button name >= Max(10) | |
[HAL-BSP]: kSysButtonManaged[39]: WARNING -> Button name >= Max(10) | |
Cal location [0]: 00000000 | |
+HWT | |
Target:8c86b000 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready | |
-HWT | |
Target:8c86b000 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready | |
HTC Service:0x0300 ep:1 TX flow control disabled | |
Target:8c86b000 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready | |
HTC Service:0x0100 ep:2 TX flow control disabled | |
nf_conntrack_rtsp v0.7 loading | |
Dec 31 19:00:24 crond[712]: crond: crond (busybox 1.17.3) started, log level 5 | |
Dec 31 19:00:26 crond[792]: crond: crond (busybox 1.17.3) started, log level 5 | |
gXdslMode:2 | |
CPE start address is af800000 | |
Intializing BME 0 | |
Intializing BME 1 | |
ipos system initialized | |
BME 1 is coming up | |
b1p0 iposBmeStartBlk cmdtag 0 status: IN PROGRESS | |
cpe> | |
Transfer to SDRAM Successful | |
BmeHw: Downloading BME 1 software at af800000 | |
Enabled clocks for BME and related modules | |
BmeHw: Bme 1 software code downloaded successfully | |
Programmed BME window registers sucessfully | |
BME out of reset | |
b1p0 iposBmeStartBlk cmdtag 0 status: COMPLETE | |
cpe> | |
alm freq 20 | |
status freq 30 | |
b1p0 iposPeriodicReportEnable cmdtag 99 status: IN PROGRESS | |
cpe> | |
alm freq 20 | |
status freq 30 | |
/etc/config/dslSavedConfig.conf file exists | |
Restoring last configuration | |
Please execute 'vdsl' in 3 seconds to enter into Supervisor mode | |
2 | |
VAP device WLAN_PRIV0 created osifp: (8b20ab80) os_if: (8b8bc000) | |
1 | |
0 | |
b1p0 iposPeriodicReportEnable cmdtag 99 status: IN PROGRESS | |
cpe> | |
b1p0 iposPeriodicReportEnable cmdtag 99 status: COMPLETE | |
cpe> | |
b1p0 iposPeriodicReportEnable cmdtag 99 status: COMPLETE | |
cpe> | |
Changing port profile #2 BAND_PLAN=0x2 PTM MODE=0x0 | |
OamoptionMask 33 | |
optionMask 8 | |
b1p0 iposBmeProvision cmdtag 0 status: IN PROGRESS | |
cpe> | |
b1p0 iposBmeProvision cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 iposPmConfig cmdtag 0 status: IN PROGRESS | |
cpe> | |
b1p2 iposPmConfig cmdtag 0 status: IN PROGRESS | |
cpe> | |
b1p1 iposPmConfig cmdtag 0 status: COMPLETE | |
cpe> | |
b1p2 iposPmConfig cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 iposPortProvision cmdtag 0 status: IN PROGRESS | |
cpe> | |
b1p1 iposPortProvision cmdtag 0 status: COMPLETE | |
cpe> | |
b1p2 iposPortProvision cmdtag 0 status: IN PROGRESS | |
cpe> | |
b1p2 iposPortProvision cmdtag 0 status: COMPLETE | |
cpe> Dec 31 19:01:13 upnpd[1416]: Initializing UPnP SDK IPv4... | |
Dec 31 19:01:14 upnpd[1416]: UPnP SDK Successfully Initialized. | |
Dec 31 19:01:14 upnpd[1416]: Setting the Web Server Root Directory to /etc/linuxigd | |
Dec 31 19:01:14 upnpd[1416]: Succesfully set the Web Server Root Directory. | |
Dec 31 19:01:14 upnpd[1416]: IPv4 Registering the root device IGDv2 with descDocUrl http://192.168.2.1:49153/51443057/gatedesc0b.xml and lowerDescDg | |
Dec 31 19:01:14 upnpd[1416]: Send initial sspd:byebye messages | |
Dec 31 19:01:14 upnpd[1416]: IPv4 Registering the root device IGDv2 again with descDocUrl http://192.168.2.1:49153/51443057/gatedesc0b.xml | |
Dec 31 19:01:14 upnpd[1416]: IGD root device successfully registered. | |
Dec 31 19:01:14 upnpd[1416]: UDN's: uuid:75802409-bccb-40e7-8e6c-fa095ecce13e | |
uuid:75802409-bccb-40e7-8e6c-fa095ecce13f | |
Dec 31 19:01:14 upnpd[1416]: WANConnectionUDN's: uuid:75802409-bccb-40e7-8e6c-fa095ecce140 | |
Dec 31 19:01:14 upnpd[1416]: Failure obtaining ip address of interface ppp0 | |
Dec 31 19:01:14 upnpd[1416]: Failure obtaining ip address of interface ppp0 | |
Dec 31 19:01:14 upnpd[1416]: DHCPServerConfigurable set to false, dnsmasq not found at: /etc/init.d/dnsmasq. | |
Dec 31 19:01:14 upnpd[1416]: IPv4 Advertisements Sent. Advertisement sending interval set to 1800 seconds. Listening for requests ... | |
Dec 31 19:01:14 upnpd[1416]: Advertisements Sent. Advertisement sending interval set to 1800 seconds. Listening for requests ... | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> Dec 31 19:02:14 upnpd[1542]: Failure obtaining ip address of interface ppp0 | |
Dec 31 19:02:14 upnpd[1542]: Failure obtaining ip address of interface ppp0 | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
b1p1 bondingRegReset cmdtag 0 status: COMPLETE | |
cpe> | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment