Created
April 3, 2019 15:40
-
-
Save jveitchmichaelis/5e61fbdbb76ad2edc5eb2217835ad4e4 to your computer and use it in GitHub Desktop.
Rock960 boot output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
switch to partitions #0, OK | |
mmc0(part 0) is current device | |
DDR Version 1.12 20180518 | |
In | |
Channel 0: LPDDR3, 800MHz | |
CS = 0 | |
MR0=0x58 | |
MR1=0x58 | |
MR2=0x58 | |
MR3=0x58 | |
MR4=0x3 | |
MR5=0x1 | |
MR6=0x5 | |
MR7=0x0 | |
MR8=0x1F | |
MR9=0x1F | |
MR10=0x1F | |
MR11=0x1F | |
MR12=0x1F | |
MR13=0x1F | |
MR14=0x1F | |
MR15=0x1F | |
MR16=0x1F | |
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB | |
Channel 1: LPDDR3, 800MHz | |
CS = 0 | |
MR0=0x58 | |
MR1=0x58 | |
MR2=0x58 | |
MR3=0x58 | |
MR4=0x3 | |
MR5=0x1 | |
MR6=0x5 | |
MR7=0x0 | |
MR8=0x1F | |
MR9=0x1F | |
MR10=0x1F | |
MR11=0x1F | |
MR12=0x1F | |
MR13=0x1F | |
MR14=0x1F | |
MR15=0x1F | |
MR16=0x1F | |
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB | |
256B stride | |
ch 0 ddrconfig = 0x101, ddrsize = 0x20 | |
ch 1 ddrconfig = 0x101, ddrsize = 0x20 | |
pmugrf_os_reg[2] = 0x3280D280, stride = 0x9 | |
OUT | |
Boot1: 2018-04-08, version: 1.12 | |
CPUId = 0x0 | |
ChipType = 0x10, 217 | |
SdmmcInit=2 0 | |
BootCapSize=100000 | |
UserCapSize=14910MB | |
FwPartOffset=2000 , 100000 | |
mmc0:cmd8,32 | |
mmc0:cmd5,32 | |
mmc0:cmd55,32 | |
mmc0:cmd1,32 | |
mmc0:cmd8,32 | |
mmc0:cmd5,32 | |
mmc0:cmd55,32 | |
mmc0:cmd1,32 | |
mmc0:cmd8,32 | |
mmc0:cmd5,32 | |
mmc0:cmd55,32 | |
mmc0:cmd1,32 | |
SdmmcInit=0 1 | |
StorageInit ok = 67909 | |
LoadTrustBL | |
No find bl30.bin | |
No find bl32.bin | |
Load uboot, ReadLba = 2000 | |
Load OK, addr=0x200000, size=0xa13b0 | |
RunBL31 0x10000 | |
[01]NOTICE: BL31: v1.3(debug):65aa5ce | |
NOTICE: BL31: Built : 10:47:37, Jun 19 2018 | |
NOTICE: BL31: Rockchip release version: v1.1 | |
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 | |
INFO: Using opteed sec cpu_context! | |
INFO: boot cpu mask: 0 | |
INFO: plat_rockchip_pmu_init(1151): pd status 3e | |
INFO: BL31: Initializing runtime services | |
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
ERROR: Error initializing runtime service opteed_fast | |
INFO: BL31: Preparing for EL3 exit to normal world | |
INFO: Entry point address = 0x200000 | |
INFO: SPSR = 0x3c9 | |
U-Boot 2017.09-g01c5534-dirty (Apr 01 2019 - 19:13:27 +0000) | |
Model: Rockchip RK3399 Evaluation Board | |
DRAM: 2 GiB | |
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0 | |
*** Warning - bad CRC, using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
Model: Rockchip RK3399 Evaluation Board | |
Pcie: Enable Power | |
Net: No ethernet found. | |
Hit any key to stop autoboot: 0 | |
switch to partitions #0, OK | |
mmc0(part 0) is current device | |
Scanning mmc 0:4... | |
Found /extlinux/extlinux.conf | |
Retrieving file: /extlinux/extlinux.conf | |
reading /extlinux/extlinux.conf | |
191 bytes read in 11 ms (16.6 KiB/s) | |
1: kernel-4.4 | |
Retrieving file: /Image | |
reading /Image | |
18792456 bytes read in 843 ms (21.3 MiB/s) | |
append: earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1d rootfstype=ext4 init=/sbin/init rootwait | |
Retrieving file: /rock960-model-ab-linux.dtb | |
reading /rock960-model-ab-linux.dtb | |
74316 bytes read in 21 ms (3.4 MiB/s) | |
## Flattened Device Tree blob at 01f00000 | |
Booting using the fdt blob at 0x1f00000 | |
Loading Device Tree to 000000007deef000, end 000000007df0424b ... OK | |
Starting kernel ... | |
<hit enter to activate fiq debugger> | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 4.4.103 (root@5e902413b4d3) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #1 SMP Mon Apr 1 19:12:43 UTC 2019 | |
[ 0.000000] Boot CPU: AArch64 Processor [410fd034] | |
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.0 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef8000 s45800 r8192 d32024 u86016 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592 | |
[ 0.000000] Kernel command line: earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1d rootfstype=ext4 init=/sbin/init rootwait | |
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
[ 0.000000] software IO TLB [mem 0x79800000-0x7d800000] (64MB) mapped at [ffffffc079800000-ffffffc07d7fffff] | |
[ 0.000000] Memory: 1973032K/2095104K available (11326K kernel code, 1584K rwdata, 4260K rodata, 1152K init, 740K bss, 122072K reserved, 0K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) | |
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) | |
[ 0.000000] .init : 0xffffff8008fc0000 - 0xffffff80090e0000 ( 1152 KB) | |
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b90000 ( 11328 KB) | |
[ 0.000000] .rodata : 0xffffff8008b90000 - 0xffffff8008fc0000 ( 4288 KB) | |
[ 0.000000] .data : 0xffffff80090e0000 - 0xffffff800926c008 ( 1585 KB) | |
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) | |
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual) | |
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB) | |
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) | |
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 64. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 | |
[ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 | |
[ 0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0) | |
[ 0.000000] ITS: using cache flushing for cmd queue | |
[ 0.000000] GIC: using LPI property table @0x0000000000290000 | |
[ 0.000000] ITS: Allocated 1792 chunks for LPIs | |
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 | |
[ 0.000000] CPU0: using LPI pending table @0x00000000002a0000 | |
[ 0.000000] GIC: using cache flushing for LPI property table | |
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } | |
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } | |
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work | |
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work | |
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.001262] Console: colour dummy device 80x25 | |
[ 0.001288] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) | |
[ 0.001302] pid_max: default: 32768 minimum: 301 | |
[ 0.001454] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.001467] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.002155] Initializing cgroup subsys devices | |
[ 0.002174] Initializing cgroup subsys freezer | |
[ 0.002228] ftrace: allocating 41477 entries in 163 pages | |
[ 0.105674] sched-energy: Sched-energy-costs installed from DT | |
[ 0.105694] CPU0: update cpu_capacity 401 | |
[ 0.105748] ASID allocator initialised with 65536 entries | |
[ 0.108780] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created | |
[ 0.109248] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created | |
[ 0.110458] Detected VIPT I-cache on CPU1 | |
[ 0.110492] CPU1: found redistributor 1 region 0:0x00000000fef20000 | |
[ 0.110522] CPU1: using LPI pending table @0x0000000079110000 | |
[ 0.110565] CPU1: update cpu_capacity 401 | |
[ 0.110569] CPU1: Booted secondary processor [410fd034] | |
[ 0.111109] Detected VIPT I-cache on CPU2 | |
[ 0.111131] CPU2: found redistributor 2 region 0:0x00000000fef40000 | |
[ 0.111160] CPU2: using LPI pending table @0x0000000079140000 | |
[ 0.111188] CPU2: update cpu_capacity 401 | |
[ 0.111192] CPU2: Booted secondary processor [410fd034] | |
[ 0.111682] Detected VIPT I-cache on CPU3 | |
[ 0.111703] CPU3: found redistributor 3 region 0:0x00000000fef60000 | |
[ 0.111730] CPU3: using LPI pending table @0x0000000079190000 | |
[ 0.111757] CPU3: update cpu_capacity 401 | |
[ 0.111760] CPU3: Booted secondary processor [410fd034] | |
[ 0.112250] Detected PIPT I-cache on CPU4 | |
[ 0.112276] CPU4: found redistributor 100 region 0:0x00000000fef80000 | |
[ 0.112316] CPU4: using LPI pending table @0x00000000791c0000 | |
[ 0.112355] CPU4: update cpu_capacity 1024 | |
[ 0.112359] CPU4: Booted secondary processor [410fd082] | |
[ 0.112894] Detected PIPT I-cache on CPU5 | |
[ 0.112913] CPU5: found redistributor 101 region 0:0x00000000fefa0000 | |
[ 0.112950] CPU5: using LPI pending table @0x0000000079200000 | |
[ 0.112978] CPU5: update cpu_capacity 1024 | |
[ 0.112982] CPU5: Booted secondary processor [410fd082] | |
[ 0.113066] Brought up 6 CPUs | |
[ 0.113149] SMP: Total of 6 processors activated. | |
[ 0.113159] CPU features: detected feature: GIC system register CPU interface | |
[ 0.113171] CPU: All CPU(s) started at EL2 | |
[ 0.113218] alternatives: patching kernel code | |
[ 0.114609] devtmpfs: initialized | |
[ 0.128733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
[ 0.128757] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
[ 0.129216] pinctrl core: initialized pinctrl subsystem | |
[ 0.129927] NET: Registered protocol family 16 | |
[ 0.133115] cpuidle: using governor ladder | |
[ 0.137129] cpuidle: using governor menu | |
[ 0.137150] Registered FIQ tty driver | |
[ 0.137334] vdso: 2 pages (1 code @ ffffff8008b96000, 1 data @ ffffff80090e4000) | |
[ 0.137361] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.137521] DMA: preallocated 256 KiB pool for atomic allocations | |
[ 0.220289] console [ttyFIQ0] enabled | |
[ 0.220823] Registered fiq debugger ttyFIQ0 | |
[ 0.247922] vcc3v3_sys: supplied by vcc_sys | |
[ 0.248671] vcc3v3_pcie: supplied by vcc3v3_sys | |
[ 0.250062] iommu: Adding device ff650000.vpu_service to group 0 | |
[ 0.250677] iommu: Adding device ff660000.rkvdec to group 1 | |
[ 0.251263] iommu: A | |
[ 0.311949] thermal thermal_zone1: power_allocator: sustainable_power will be estimated | |
[ 0.312885] NET: Registered protocol family 2 | |
[ 0.313698] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
[ 0.314440] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) | |
[ 0.315463] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.316137] UDP hash table entries: 1024 (order: 4, 98304 bytes) | |
[ 0.316729] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) | |
[ 0.317572] NET: Registered protocol family 1 | |
[ 0.318282] RPC: Registered named UNIX socket transport module. | |
[ 0.318824] RPC: Registered udp transport module. | |
[ 0.319241] RPC: Registered tcp transport module. | |
[ 0.319657] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.320840] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.321633] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
[ 0.325394] Initialise system trusted keyring | |
[ 0.334004] NFS: Registering the id_resolver key type | |
[ 0.334475] Key type id_resolver registered | |
[ 0.334857] Key type id_legacy registered | |
[ 0.335270] fuse init (API version 7.23) | |
[ 0.335997] SGI XFS with security attributes, no debug enabled | |
[ 0.341119] NET: Registered protocol family 38 | |
[ 0.341533] Key type asymmetric registered | |
[ 0.341928] Asymmetric key parser 'x509' registered | |
[ 0.342518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
[ 0.343191] io scheduler noop registered | |
[ 0.343543] io scheduler deadline registered | |
[ 0.344052] io scheduler cfq registered (default) | |
[ 0.345875] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned | |
[ 0.351046] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found | |
[ 0.351625] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found | |
[ 0.352215] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found | |
[ 0.894814] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! | |
[ 0.895540] rockchip-pcie: probe of f8000000.pcie failed with error -110 | |
[ 0.897523] rk-vcodec ff650000.vpu_service: probe device | |
[ 0.898066] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc078c27010 | |
[ 0.898909] rk-vcodec ff650000.vpu_service: allocator is drm | |
[ 0.899474] rk-vcodec ff650000.vpu_service: checking hw id 0 | |
[ 0.900607] rk-vcodec ff650000.vpu_service: init success | |
[ 0.901921] rk-vcodec ff660000.rkvdec: probe device | |
[ 0.902392] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc078c27810 | |
[ 0.903126] rk-vcodec ff660000.rkvdec: allocator is drm | |
[ 0.903639] rk-vcodec ff660000.rkvdec: checking hw id 6876 | |
[ 0.904454] rk-vcodec ff660000.rkvdec: init success | |
[ 0.906288] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
[ 0.906970] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
[ 0.909245] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
[ 0.909926] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 | |
[ 0.911706] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled | |
[ 0.913921] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A | |
[ 0.915395] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 37, base_baud = 1500000) is a 16550A | |
[ 0.916806] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A | |
[ 0.918559] [drm:drm_core_init] Initialized drm 1.1.0 20060810 | |
[ 0.922377] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c2cb30) | |
[ 0.923307] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c2cb30) | |
[ 0.924268] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports | |
[ 0.924871] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver | |
[ 0.925608] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) | |
[ 0.927123] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c25be8) | |
[ 0.927853] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[ 0.928555] [drm:drm_vblank_init] No driver support for vblank timestamp query. | |
[ 0.929358] rockchip-drm display-subsystem: failed to parse loader memory | |
[ 0.929985] rockchip-drm display-subsystem: No connectors reported connected with modes | |
[ 0.930716] [drm:drm_fb_helper_single_fb_probe] Cannot find any crtc or sizes - going 1024x768 | |
[ 0.943649] Console: switching to colour frame buffer device 128x48 | |
[ 0.951203] rockchip-drm display-subsystem: fb0: frame buffer device | |
[ 0.959495] mali ff9a0000.gpu: Failed to get regulator | |
[ 0.959969] mali ff9a0000.gpu: Power control initialization failed | |
[ 0.960866] Unable to detect cache hierarchy from DT for CPU 0 | |
[ 0.962153] brd: module loaded | |
[ 0.967513] loop: module loaded | |
[ 0.968343] zram: Added device: zram0 | |
[ 0.968963] lkdtm: No crash points registered, enable through debugfs | |
[ 0.971006] spidev spi32766.0: buggy DT: spidev listed directly in DT | |
[ 0.971602] ------------[ cut here ]------------ | |
[ 0.972007] WARNING: at drivers/spi/spidev.c:720 | |
[ 0.972412] Modules linked in: | |
[ 0.972701] | |
[ 0.972841] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.4.103 #1 | |
[ 0.973374] Hardware name: ROCK960 - 96boards based on Rockchip RK3399 (DT) | |
[ 0.973991] task: ffffffc0003d8000 task.stack: ffffffc079080000 | |
[ 0.974527] PC is at spidev_probe+0x1c4/0x1ec | |
[ 0.974921] LR is at spidev_probe+0x68/0x1ec | |
[ 0.975303] pc : [<ffffff8008583ea8>] lr : [<ffffff8008583d4c>] pstate: 60000045 | |
[ 0.975953] sp : ffffffc0790838c0 | |
[ 0.976252] x29: ffffffc0790838c0 x28: 0000000000000000 | |
[ 0.976744] x27: ffffff80090a85f0 x26: 0000000000000000 | |
[ 0.977234] x25: 0000000000000000 x24: ffffff80092f1000 | |
[ 0.977724] x23: ffffff8009170000 x22: ffffff800917a6d8 | |
[ 0.978214] x21: 0000000000000000 x20: ffffffc07808c000 | |
[ 0.978703] x19: ffffff8008c46fa8 x18: 00000000000ed0fe | |
[ 0.979193] x17: 0000000000000060 x16: 000000000000000e | |
[ 0.979683] x15: 000000000000000a x14: ffffff8089273817 | |
[ 0.980172] x13: 0000000000000005 x12: 0000000000000000 | |
[ 0.980662] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f | |
[ 0.981151] x9 : 6900feff02fefeff x8 : 7f7f7f7f7f7f7f7f | |
[ 0.981641] x7 : 01fefefefefefeff x6 : 8080808080808000 | |
[ 0.982131] x5 : 0080808080808080 x4 : 76656469ffffffff | |
[ 0.982620] x3 : 6a02000004000000 x2 : 0000004076eb7000 | |
[ 0.983110] x1 : 0000000000000005 x0 : 0000000000000000 | |
[ 0.983600] | |
[ 0.983600] PC: 0xffffff8008583e28: | |
[ 0.984040] 3e28 9111a000 79404401 36100401 90004842 aa1403e1 9127d442 97f8f898 1400001b | |
[ 0.984810] 3e48 910922c1 2a1903e0 91002021 52800015 97f8707e 91198301 aa0103e0 f8440c02 | |
[ 0.985578] 3e68 f9002037 f9000457 f9001662 f90006e0 91198300 9417f4c8 b9433a80 b9009260 | |
[ 0.986345] 3e88 35000095 52800000 f9005e93 14000009 aa1303e0 97f06fe8 2a1503e0 14000005 | |
[ 0.987113] 3ea8 d4210000 17ffffa9 12800255 17fffff1 a94153f3 a9425bf5 a94363f7 f94023f9 | |
[ 0.987880] 3ec8 a8c57bfd d65f03c0 a9bc7bfd 910003fd a90153f3 a9025bf5 f9001bf7 aa0003f6 | |
[ 0.988648] 3ee8 aa1e03e0 f0005fb5 aa0103f7 911982b4 d503201f aa1403e0 9417f47d f9402293 | |
[ 0.989416] 3f08 91010280 d100a273 9100a261 eb00003f 54000100 b9400262 b94046c1 6b01005f | |
[ 0.990185] | |
[ 0.990185] LR: 0xffffff8008583ccc: | |
[ 0.990624] 3ccc 9417f534 52800000 a94153f3 a9425bf5 a8c37bfd d65f03c0 a9bb7bfd 910003fd | |
[ 0.991392] 3cec a90153f3 a9025bf5 a90363f7 f90023f9 aa0003f4 aa1e03e0 d503201f f9415680 | |
[ 0.992160] 3d0c b4000220 f0003613 aa1403e1 913ea273 aa1303e0 940dd83f b5000160 90004841 | |
[ 0.992927] 3d2c aa1403e0 91264c21 97fe75be f9415680 b40000a0 aa1403e1 aa1303e0 940dd835 | |
[ 0.993695] 3d4c b4000ae0 d0006ac0 52901801 d2801302 72a04801 f9414c00 97f06b90 aa0003f3 | |
[ 0.994463] 3d6c 12800160 b4000a53 f0006b76 90004841 910922d5 9126ec21 910042b7 91002260 | |
[ 0.995230] 3d8c aa1703e2 f9001274 f0005fb8 97ed8a38 90004841 aa1703e2 91275c21 9100e260 | |
[ 0.995998] 3dac 9100a277 97ed8212 f9001677 91198300 f90006f7 9417f4cd 910022a0 d2800002 | |
[ 0.996767] | |
[ 0.996767] SP: 0xffffffc079083840: | |
[ 0.997206] 3840 0917a6d8 ffffff80 09170000 ffffff80 092f1000 ffffff80 00000000 00000000 | |
[ 0.997974] 3860 00000000 00000000 090a85f0 ffffff80 00000000 00000000 790838c0 ffffffc0 | |
[ 0.998742] 3880 08583d4c ffffff80 790838c0 ffffffc0 08583ea8 ffffff80 60000045 00000000 | |
[ 0.999509] 38a0 790838c0 ffffffc0 08583d4c ffffff80 ffffffff ffffffff 7808c000 ffffffc0 | |
[ 1.000277] 38c0 79083910 ffffffc0 08580f50 ffffff80 | |
[ 1.099484] ehci-platform fe3c0000.usb: EHCI Host Controller | |
[ 1.100149] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 | |
[ 1.100958] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000 | |
[ 1.106771] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 | |
[ 1.107470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.108081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.108724] usb usb1: Product: EHCI Host Controller | |
[ 1.109166] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd | |
[ 1.109654] usb usb1: SerialNumber: fe3c0000.usb | |
[ 1.110515] hub 1-0:1.0: USB hub found | |
[ 1.110888] hub 1-0:1.0: 1 port detected | |
[ 1.111778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 1.112339] ohci-platform: OHCI generic platform driver | |
[ 1.113277] ohci-platform fe3e0000.usb: Generic Platform OHCI controller | |
[ 1.114051] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 | |
[ 1.114838] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000 | |
[ 1.169909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | |
[ 1.170507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.171160] usb usb2: Product: Generic Platform OHCI controller | |
[ 1.171684] usb usb2: Manufacturer: Linux 4.4.103 ohci_hcd | |
[ 1.172180] usb usb2: SerialNumber: fe3e0000.usb | |
[ 1.173031] hub 2-0:1.0: USB hub found | |
[ 1.173391] hub 2-0:1.0: 1 port detected | |
[ 1.174608] usbcore: registered new interface driver cdc_acm | |
[ 1.175123] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
[ 1.175872] usbcore: registered new interface driver cdc_wdm | |
[ 1.176410] usbcore: registered new interface driver uas | |
[ 1.176965] usbcore: registered new interface driver usb-storage | |
[ 1.177573] usbcore: registered new interface driver usbserial | |
[ 1.178125] usbcore: registered new interface driver usbserial_generic | |
[ 1.178728] usbserial: USB Serial support registered for generic | |
[ 1.179309] usbcore: registered new interface driver cp210x | |
[ 1.179839] usbserial: USB Serial support registered for cp210x | |
[ 1.180405] usbcore: registered new interface driver ftdi_sio | |
[ 1.180951] usbserial: USB Serial support registered for FTDI USB Serial Device | |
[ 1.181666] usbcore: registered new interface driver keyspan | |
[ 1.182197] usbserial: USB Serial support registered for Keyspan - (without firmware) | |
[ 1.182917] usbserial: USB Serial support registered for Keyspan 1 port adapter | |
[ 1.183577] usbserial: USB Serial support registered for Keyspan 2 port adapter | |
[ 1.184248] usbserial: USB Serial support registered for Keyspan 4 port adapter | |
[ 1.184936] usbcore: registered new interface driver option | |
[ 1.185448] usbserial: USB Serial support registered for GSM modem (1-port) | |
[ 1.186170] usbcore: registered new interface driver oti6858 | |
[ 1.186689] usbserial: USB Serial support registered for oti6858 | |
[ 1.187268] usbcore: registered new interface driver pl2303 | |
[ 1.187788] usbserial: USB Serial support registered for pl2303 | |
[ 1.188350] usbcore: registered new interface driver qcserial | |
[ 1.188892] usbserial: USB Serial support registered for Qualcomm USB modem | |
[ 1.189548] usbcore: registered new interface driver sierra | |
[ 1.190084] usbserial: USB Serial support registered for Sierra USB modem | |
[ 1.191696] usbcore: registered new interface driver usbtouchscreen | |
[ 1.192616] i2c /dev entries driver | |
[ 1.194340] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! | |
[ 1.195017] fan53555-reg: supplied by vcc_sys | |
[ 1.197499] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! | |
[ 1.198162] fan53555-reg: supplied by vcc_sys | |
[ 1.200685] rk808 0-001b: Pmic Chip id: 0x0 | |
[ 1.203802] rk808-regulator rk808-regulator: there is no dvs0 gpio | |
[ 1.204392] rk808-regulator rk808-regulator: there is no dvs1 gpio | |
[ 1.205033] DCDC_REG1: supplied by vcc_sys | |
[ 1.206101] DCDC_REG2: supplied by vcc_sys | |
[ 1.206999] DCDC_REG3: supplied by vcc_sys | |
[ 1.207612] DCDC_REG4: supplied by vcc_sys | |
[ 1.208411] LDO_REG1: supplied by vcc_sys | |
[ 1.209878] LDO_REG2: supplied by vcc_sys | |
[ 1.211167] LDO_REG3: supplied by vcc_sys | |
[ 1.212462] LDO_REG4: supplied by vcc_sys | |
[ 1.213798] LDO_REG5: supplied by vcc_sys | |
[ 1.215087] LDO_REG6: supplied by vcc_sys | |
[ 1.216381] LDO_REG7: supplied by vcc_sys | |
[ 1.217702] LDO_REG8: supplied by vcc_sys | |
[ 1.219017] SWITCH_REG1: supplied by vcc3v3_sys | |
[ 1.219668] SWITCH_REG2: supplied by vcc3v3_sys | |
[ 1.223517] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 | |
[ 1.224559] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094c8000 | |
[ 1.225734] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094ca000 | |
[ 1.226838] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80094cc000 | |
[ 1.227931] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at ffffff80094ce000 | |
[ 1.239164] fusb302 4-0022: port 0 probe success | |
[ 1.239593] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d0000 | |
[ 1.241189] IR NEC protocol handler initialized | |
[ 1.241962] usbcore: registered new interface driver uvcvideo | |
[ 1.242472] USB Video Class driver (1.1.1) | |
[ 1.245301] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 | |
[ 1.246903] Bluetooth: Virtual HCI driver ver 1.5 | |
[ 1.247441] Bluetooth: HCI UART driver ver 2.3 | |
[ 1.247853] Bluetooth: HCI UART protocol H4 registered | |
[ 1.248306] Bluetooth: HCI UART protocol LL registered | |
[ 1.248768] Bluetooth: HCI UART protocol ATH3K registered | |
[ 1.249306] usbcore: registered new interface driver bfusb | |
[ 1.249854] usbcore: registered new interface driver btusb | |
[ 1.250721] cpu cpu0: leakage=24 | |
[ 1.251757] cpu cpu0: pvtm-sel=0 | |
[ 1.252312] cpu cpu4: leakage=43 | |
[ 1.254646] cpu cpu4: pvtm-sel=0 | |
[ 1.258873] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.259421] sdhci: Copyright(c) Pierre Ossman | |
[ 1.259833] Synopsys Designware Multimedia Card Interface Driver | |
[ 1.261225] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. | |
[ 1.261907] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. | |
[ 1.262510] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a | |
[ 1.263070] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo | |
[ 1.263953] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. | |
[ 1.264733] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found | |
[ 1.265288] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found | |
[ 1.266632] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. | |
[ 1.267334] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. | |
[ 1.267960] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a | |
[ 1.268505] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo | |
[ 1.269381] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. | |
[ 1.270206] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found | |
[ 1.270999] vcc_sd: unsupportable voltage range: 3300000-3000000uV | |
[ 1.271557] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done | |
[ 1.272228] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done | |
[ 1.283802] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
[ 1.295030] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized | |
[ 1.295952] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.298236] sdhci-arasan fe330000.sdhci: No vmmc regulator found | |
[ 1.298784] sdhci-arasan fe330000.sdhci: No vqmmc regulator found | |
[ 1.325940] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA | |
[ 1.327321] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 1.328155] usbcore: registered new interface driver usbhid | |
[ 1.328654] usbhid: USB HID core driver | |
[ 1.329708] ff100000.saradc supply vref not found, using dummy regulator | |
[ 1.331355] usbcore: registered new interface driver snd-usb-audio | |
[ 1.336124] Initializing XFRM netlink socket | |
[ 1.337199] NET: Registered protocol family 10 | |
[ 1.338953] NET: Registered protocol family 17 | |
[ 1.339382] NET: Registered protocol family 15 | |
[ 1.339842] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 1.341387] Bluetooth: RFCOMM socket layer initialized | |
[ 1.341981] Bluetooth: RFCOMM ver 1.11 | |
[ 1.342346] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
[ 1.342901] Bluetooth: HIDP socket layer initialized | |
[ 1.343404] [WLAN_RFKILL]: Enter rfkill_wlan_init | |
[ 1.344129] [WLAN_RFKILL]: Enter rfkill_wlan_probe | |
[ 1.344598] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354 | |
[ 1.345214] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. | |
[ 1.345851] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. | |
[ 1.346566] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 1003, flags = 0. | |
[ 1.347394] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio | |
[ 1.347869] [WLAN_RFKILL]: Exit rfkill_wlan_probe | |
[ 1.348338] [BT_RFKILL]: Enter rfkill_rk_init | |
[ 1.349081] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 1083. | |
[ 1.349851] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 1009. | |
[ 1.350595] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 1091. | |
[ 1.351339] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 1004. | |
[ 1.352674] [BT_RFKILL]: Request irq for bt wakeup host | |
[ 1.353229] [BT_RFKILL]: ** disable irq | |
[ 1.353728] [BT_RFKILL]: bt_default device registered. | |
[ 1.354275] Key type dns_resolver registered | |
[ 1.355683] cif_isp10_v4l2_drv_probe: probing... | |
[ 1.356212] cif_isp10_pltfrm_dev_init(1224) ERR: could not get default pinstate | |
[ 1.356876] cif_isp10_pltfrm_dev_init WARN: could not get pins_sleep pinstate | |
[ 1.357506] cif_isp10_pltfrm_dev_init WARN: could not get pins_inactive pinstate | |
[ 1.358892] cif_isp10_pltfrm_get_img_src_device(1644) ERR: could not get camera i2c client, maybe not yet created, deferring device probing... | |
[ 1.360029] cif_isp10_img_srcs_init(1099) ERR: failed with error -14 | |
[ 1.360587] cif_isp10_create(5772) ERR: cif_isp10_img_srcs_init failed | |
[ 1.361176] cif_isp10_create(5808) ERR: failed with error -14 | |
[ 1.362162] Registered cp15_barrier emulation handler | |
[ 1.362802] Registered setend emulation handler | |
[ 1.363788] Loading compiled-in X.509 certificates | |
[ 1.366202] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned | |
[ 1.370548] mali ff9a0000.gpu: leakage=32 | |
[ 1.374996] mali ff9a0000.gpu: pvtm-sel=0 | |
[ 1.375663] mmc1: MAN_BKOPS_EN bit is not set | |
[ 1.377388] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 | |
[ 1.378424] mali ff9a0000.gpu: Protected mode not available | |
[ 1.379442] mali ff9a0000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] | |
[ 1.380395] mali ff9a0000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] | |
[ 1.381335] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model | |
[ 1.382549] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 381; [Func] : kbase_devfreq_init(); success initing power_model_simple. | |
[ 1.384490] mali ff9a0000.gpu: Probed as mali0 | |
[ 1.391239] mmc1: new HS400 Enhanced strobe MMC card at address 0001 | |
[ 1.391335] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller | |
[ 1.392850] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3 | |
[ 1.393249] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB | |
[ 1.394014] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB | |
[ 1.394150] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 | |
[ 1.394217] xhci-hcd xhci-hcd.7.auto: irq 231, io mem 0xfe800000 | |
[ 1.394431] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.394439] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.394445] usb usb3: Product: xHCI Host Controller | |
[ 1.394451] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd | |
[ 1.394457] usb usb3: SerialNumber: xhci-hcd.7.auto | |
[ 1.395184] hub 3-0:1.0: USB hub found | |
[ 1.395221] hub 3-0:1.0: 1 port detected | |
[ 1.395593] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller | |
[ 1.395876] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4 | |
[ 1.395971] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 1.396095] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 | |
[ 1.396103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.396110] usb usb4: Product: xHCI Host Controller | |
[ 1.396116] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd | |
[ 1.396121] usb usb4: SerialNumber: xhci-hcd.7.auto | |
[ 1.396799] hub 4-0:1.0: USB hub found | |
[ 1.396833] hub 4-0:1.0: 1 port detected | |
[ 1.398406] xhci-hcd xhci-hcd.7.auto: remove, state 1 | |
[ 1.398426] usb usb4: USB disconnect, device number 1 | |
[ 1.406097] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB | |
[ 1.407159] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB | |
[ 1.422447] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds. | |
[ 1.423098] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset. | |
[ 1.423804] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered | |
[ 1.424568] xhci-hcd xhci-hcd.7.auto: remove, state 1 | |
[ 1.425093] usb usb3: USB disconnect, device number 1 | |
[ 1.426237] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered | |
[ 1.427800] mmcblk1: p1 p2 p3 p4 p5 | |
[ 1.432894] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller | |
[ 1.433535] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 | |
[ 1.434379] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010 | |
[ 1.435192] xhci-hcd xhci-hcd.8.auto: irq 232, io mem 0xfe900000 | |
[ 1.435866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.436464] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.437125] usb usb3: Product: xHCI Host Controller | |
[ 1.437556] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd | |
[ 1.438056] usb usb3: SerialNumber: xhci-hcd.8.auto | |
[ 1.439210] hub 3-0:1.0: USB hub found | |
[ 1.439584] hub 3-0:1.0: 1 port detected | |
[ 1.440346] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller | |
[ 1.441229] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 | |
[ 1.442004] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 1.442859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 | |
[ 1.443466] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.444122] usb usb4: Product: xHCI Host Controller | |
[ 1.444564] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd | |
[ 1.445071] usb usb4: SerialNumber: xhci-hcd.8.auto | |
[ 1.446188] hub 4-0:1.0: USB hub found | |
[ 1.446552] hub 4-0:1.0: 1 port detected | |
[ 1.451606] ehci-platform fe380000.usb: EHCI Host Controller | |
[ 1.452327] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 | |
[ 1.453194] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000 | |
[ 1.459859] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 | |
[ 1.460617] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 1.461243] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.461897] usb usb5: Product: EHCI Host Control | |
[ 1.523300] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 | |
[ 1.523931] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 1.524572] usb usb6: Product: Generic Platform OHCI controller | |
[ 1.525112] usb usb6: Manufacturer: Linux 4.4.103 ohci_hcd | |
[ 1.525600] usb usb6: SerialNumber: fe3a0000.usb | |
[ 1.526810] hub 6-0:1.0: USB hub found | |
[ 1.527177] hub 6-0:1.0: 1 port detected | |
[ 1.529254] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. | |
[ 1.529989] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. | |
[ 1.530602] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a | |
[ 1.531162] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo | |
[ 1.532059] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. | |
[ 1.532900] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found | |
[ 1.533447] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found | |
[ 1.534453] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq | |
[ 1.546068] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
[ 1.558173] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized | |
[ 1.560205] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok | |
[ 1.563960] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok | |
[ 1.567711] | |
[ 1.567798] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.2 (r) | |
[ 1.567808] ======== dhd_wlan_init_plat_data ======== | |
[ 1.567815] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1 | |
[ 1.567820] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1 | |
[ 1.567827] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter | |
[ 1.567836] dhd_wlan_init_gpio: host_oob_irq: 71 | |
[ 1.567840] dhd_wlan_init_gpio: host_oob_irq_flags=0x414 | |
[ 1.567844] dhd_wifi_platform_load: Enter | |
[ 1.567874] Power-up adapter 'DHD generic adapter' | |
[ 1.567959] wifi_platform_set_power = 1 | |
[ 1.567965] ======== PULL WL_REG_ON(-1) HIGH! ======== | |
[ 1.567970] [WLAN_RFKILL]: rockchip_wifi_power: 1 | |
[ 1.567975] [WLAN_RFKILL]: wifi turn on power. -1 | |
[ 1.573778] ======================================================= | |
[ 1.574337] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== | |
[ 1.574912] ======================================================= | |
[ 1.575473] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver v5.2.2.3_24783.20171030) init. | |
[ 1.576281] [WLAN_RFKILL]: rockchip_wifi_power: 1 | |
[ 1.576708] [WLAN_RFKILL]: wifi turn on power. -1 | |
[ 1.577149] RTW: module init start | |
[ 1.577467] RTW: rtl8188eu v5.2.2.3_24783.20171030 | |
[ 1.577910] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter | |
[ 1.578622] usbcore: registered new interface driver rtl8188eu | |
[ 1.579166] RTW: module init ret=0 | |
[ 1.581374] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:18:20 UTC (1358500700) | |
[ 1.605840] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) | |
[ 1.607902] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 1.609301] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-94108fb', rk_ko_ver is '5', built at '19:11:32', on 'Apr 1 2019'. | |
[ 1.609959] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 1.612268] Mali: Mali device driver loaded | |
[ 1.612784] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) | |
[ 1.613782] ALSA device list: | |
[ 1.614054] #0: HDMI-CODEC | |
[ 1.614322] #1: ROCKCHIP,SPDIF | |
[ 1.669679] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0) | |
[ 1.703185] EXT4-fs (mmcblk1p5): recovery complete | |
[ 1.704392] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) | |
[ 1.705168] VFS: Mounted root (ext4 filesystem) on device 179:5. | |
[ 1.706341] devtmpfs: mounted | |
[ 1.707250] Freeing unused kernel memory: 1152K | |
[ 1.741805] usb 3-1: new low-speed USB device number 2 using xhci-hcd | |
[ 1.781078] systemd[1]: System time before build time, advancing clock. | |
[ 1.787381] systemd[1]: Failed to insert module 'autofs4': No such file or directory | |
[ 1.799308] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available) | |
[ 1.803066] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available) | |
Welcome to [1B][1mDebian GNU/Linux 9 (stretch)[1B][0m! | |
[ 1.840454] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available) | |
[ 1.843190] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 34 bits of entropy available) | |
[ 1.844501] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 35 bits of entropy available) | |
[ 1.857386] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 36 bits of entropy available) | |
[ 1.857992] vendor storage:20160801 ret = 0 | |
[ 1.862641] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available) | |
[ 1.863835] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available) | |
[ 1.864842] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available) | |
[ 1.866188] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available) | |
[ 1.868317] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 123 | |
[ 1.868802] wifi_platform_bus_enumerate device present 1 | |
[ 1.868806] ======== Card detection to detect SDIO card! ======== | |
[ 1.868810] mmc2:mmc host rescan start! | |
[ 1.871455] usb 3-1: New USB device found, idVendor=04f2, idProduct=0116 | |
[ 1.872086] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 1.872720] usb 3-1: Product: USB Keyboard | |
[ 1.873107] usb 3-1: Manufacturer: CHICONY | |
[ 1.874335] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes | |
[ 1.875442] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) | |
[ 1.876051] mmc2: new ultra high speed SDR104 SDIO card at address 0001 | |
[ 1.892938] bcmsdh_register: register client driver | |
[ 1.893633] bcmsdh_sdmmc_probe: Enter num=1 | |
[ 1.893947] input: CHICONY USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1:1.0/0003:04F2:0116.0001/input/input0 | |
[ 1.895442] bcmsdh_sdmmc_probe: Enter num=2 | |
[ 1.895841] bus num (host idx)=2, slot num (rca)=1 | |
[ 1.896270] found adapter info 'DHD generic adapter' | |
[ 1.896923] sdioh_attach: set sd_f2_blocksize 256 | |
[ 1.897483] sdioh_attach: sd clock rate = 0 | |
[ 1.899023] F1 signature read @0x18000000=0x17224356 | |
[ 1.906540] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2 | |
[ 1.907813] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 | |
[ 1.908534] dhd_conf_set_chiprev: chip=0x4354, chiprev=2 | |
[ 1.909302] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 | |
[ 1.911194] wl_escan_attach: Enter | |
[ 1.911541] wl_escan_init: Enter | |
[ 1.912642] wl_create_event_handler(): thread:wl_escan_handler:aa started | |
[ 1.912654] tsk Enter, tsk = 0xffffffc0769501b0 | |
[ 1.914427] dhd_attach(): thread:dhd_watchdog_thread:ab started | |
[ 1.916437] dhd_attach(): thread:dhd_dpc:ac started | |
[ 1.917067] dhd_attach(): thread:dhd_rxf:ad started | |
[ 1.917510] dhd_deferred_work_init: work queue initialized | |
[ 1.918069] dhd_bus_set_default_min_res_mask: Unhandled chip id | |
[ 1.918903] sdioh_cis_read: func_cis_ptr[0]=0x10ac | |
[ 1.937345] Dongle Host Driver, version 1.579.77.41.2 (r) | |
[ 1.938811] Register interface [wlan0] MAC: cc:4b:73:27:0a:80 | |
[ 1.938811] | |
[ 1.940834] dhd_wl_ioctl: returning as busstate=0 | |
[ 1.941286] dhd_dbg_detach_pkt_monitor, 2204 | |
[ 1.941686] dhd_bus_devreset: == Power OFF == | |
[ 1.943808] bcmsdh_oob_intr_unregister: Enter | |
[ 1.944219] bcmsdh_oob_intr_unregister: irq is not registered | |
[ 1.944783] dhd_txglom_enable: enable 0 | |
[ 1.945149] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1 | |
[ 1.945574] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-xhci-hcd.8.auto-1/input0 | |
[ 1.946998] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1 | |
[ 1.947709] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5 | |
[ 1.948315] sdioh_set_mode: set txglom_mode to copy | |
[ 1.948761] dhd_bus_devreset: WLAN OFF DONE | |
[ 1.949715] wifi_platform_set_power = 0 | |
[ 1.950141] ======== PULL WL_REG_ON(-1) LOW! ======== | |
[ 1.950600] [WLAN_RFKILL]: rockchip_wifi_power: 0 | |
[ 1.951383] [WLAN_RFKILL]: wifi shut off power. | |
[ 1.952259] dhd_module_init: Exit err=0 | |
[ 1.977804] usb 6-1: new low-speed USB device number 2 using ohci-platform | |
[[1B][0;32m OK [1B][0m] Listening on Network Service Netlink Socket. | |
[[1B][0;1;33mUNSUPP[1B][0m] Starting of EFI System Partition Automount not supported. | |
[[1B][0;32m OK [1B][0m] Listening on /dev/initctl Compatibility Named Pipe. | |
[[1B][0;32m OK [1B][0m] Reached target Remote File Systems. | |
[[1B][0;32m OK [1B][0m] Reached target Swap. | |
[[1B][0;32m OK [1B][0m] Listening on Journal Socket (/dev/log). | |
[[1B][0;32m OK [1B][0m] Listening on Journal Socket. | |
[[1B][0;32m OK [1B][0m] Started Dispatch Password Requests to Console Directory Watch. | |
[[1B][0;32m OK [1B][0m] Created slice System Slice. | |
Starting Create Static Device Nodes in /dev... | |
Starting Set the console keyboard layout... | |
[[1B][0;32m OK [1B][0m] Created slice system-serial\x2dgetty.slice. | |
[[1B][0;32m OK [1B][0m] Created slice User and Session Slice. | |
[[1B][0;32m OK [1B][0m] Started Forward Password Requests to Wall Directory Watch. | |
[[1B][0;32m OK [1B][0m] Reached target Encrypted Volumes. | |
[[1B][0;32m OK [1B][0m] Listening on udev Kernel Socket. | |
Starting Nameserver information manager... | |
Starting Load Kernel Modules... | |
Starting Remount Root and Kernel File Systems... | |
[[1B][0;32m OK [1B][0m] Reached target Slices. | |
[[1B][0;32m OK [1B][0m] Created slice system-getty.slice. | |
[[1B][0;32m OK [1B][0m] Listening on udev Control Socket. | |
[[1B][0;32m OK [1B][0m] Listening on Syslog Socket. | |
Starting Journal Service... | |
Mounting Debug File System... | |
[[1B][0;32m OK [1B][0m] Started Remount Root and Kernel File Systems. | |
[[1B][0;32m OK [1B][0m] Started Load Kernel Modules. | |
Mounting FUSE Control File System... | |
Mounting Configuration File System... | |
Starting Apply Kernel Variables... | |
Starting Load/Save Random Seed... | |
Starting udev Coldplug all Devices... | |
[[1B][0;32m OK [1B][0m] Mounted Configuration File System. | |
[[1B][0;32m OK [1B][0m] Mounted FUSE Control File System. | |
[[1B][0;32m OK [1B][0m] Started Create Static Device Nodes in /dev. | |
[[1B][0;32m OK [1B][0m] Mounted Debug File System. | |
[[1B][0;32m OK [1B][0m] Started Nameserver information manager. | |
[ 2.161896] usb 6-1: New USB device found, idVendor=093a, idProduct=2510 | |
[ 2.162535] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 2.163236] usb 6-1: Product: USB Optical Mouse | |
[ 2.163644] usb 6-1: Manufacturer: PixArt | |
Starting udev Kernel Device Manager... | |
[[1B][0;32m OK [1B][0m] Started Apply Kernel Variables. | |
[[1B][0;32m OK [1B][0m] Started Load/Save Random Seed. | |
[ 2.174099] input: PixArt USB Optical Mouse as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:093A:2510.0002/input/input1 | |
[ 2.175660] hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-fe3a0000.usb-1/input0 | |
[[1B][0;32m OK [1B][0m] Started udev Kernel Device Manager. | |
Starting Network Service... | |
[[1B][0;32m OK [1B][0m] Started Network Service. | |
[[1B][0;32m OK [1B][0m] Started Set the console keyboard layout. | |
[[1B][0;32m OK [1B][0m] Reached target Local File Systems (Pre). | |
[[1B][0;32m OK [1B][0m] Reached target Local File Systems. | |
Starting Raise network interfaces... | |
Starting Set console font and keymap... | |
[[1B][0;32m OK [1B][0m] Started Set console font and keymap. | |
[[1B][0;32m OK [1B][0m] Started Journal Service. | |
Starting Flush Journal to Persistent Storage... | |
[[1B][0;32m OK [1B][0m] Started udev Coldplug all Devices. | |
[ 2.397217] systemd-journald[193]: Received request to flush runtime journal from PID 1 | |
[[1B][0;32m OK [1B][0m] Started Flush Journal to Persistent Storage. | |
Starting Create Volatile Files and Directories... | |
[[1B][0;32m OK [1B][0m] Started Create Volatile Files and Directories. | |
Starting Update UTMP about System Boot/Shutdown... | |
Starting Network Time Synchronization... | |
[[1B][0;32m OK [1B][0m] Started Update UTMP about System Boot/Shutdown. | |
[[1B][0;32m OK [1B][0m] Started Network Time Synchronization. | |
[[1B][0;32m OK [1B][0m] Reached target System Initialization. | |
[[1B][0;32m OK [1B][0m] Listening on OpenBSD Secure Shell server socket. | |
[[1B][0;32m OK [1B][0m] Listening on ACPID Listen Socket. | |
[[1B][0;32m OK [1B][0m] Started Daily Cleanup of Temporary Directories. | |
[[1B][0;32m OK [1B][0m] Listening on D-Bus System Message Bus Socket. | |
[[1B][0;32m OK [1B][0m] Started ACPI Events Check. | |
[[1B][0;32m OK [1B][0m] Reached target Paths. | |
Starting Docker Socket for the API. | |
[[1B][0;32m OK [1B][0m] Reached target System Time Synchronized. | |
[[1B][0;32m OK [1B][0m] Started Trigger anacron every hour. | |
[[1B][0;32m OK [1B][0m] Started Daily apt download activities. | |
[[1B][0;32m OK [1B][0m] Started Daily apt upgrade and clean activities. | |
[[1B][0;32m OK [1B][0m] Reached target Timers. | |
[[1B][0;32m OK [1B][0m] Listening on Docker Socket for the API. | |
[[1B][0;32m OK [1B][0m] Reached target Sockets. | |
[[1B][0;32m OK [1B][0m] Reached target Basic System. | |
Starting Disk Manager... | |
[[1B][0;32m OK [1B][0m] Started ACPI event daemon. | |
[[1B][0;32m OK [1B][0m] Started Run anacron jobs. | |
Starting System Logging Service... | |
Starting Login Service... | |
Starting Provide limited super user privileges to specific users... | |
Starting Save/Restore Sound Card State... | |
[[1B][0;32m OK [1B][0m] Started Setup rockchip platform environment. | |
Starting Daemon for power management... | |
Starting LSB: Load kernel modules needed to enable cpufreq scaling... | |
[[1B][0;32m OK [1B][0m] Started D-Bus System Message Bus. | |
Starting WPA supplicant... | |
Starting Network Manager... | |
[[1B][0;32m OK [1B][0m] Started System Logging Service. | |
[[1B][0;32m OK [1B][0m] Started Provide limited super user privileges to specific users. | |
[[1B][0;32m OK [1B][0m] Started Save/Restore Sound Card State. | |
[[1B][0;32m OK [1B][0m] Found device /dev/ttyFIQ0. | |
[[1B][0;32m OK [1B][0m] Started WPA supplicant. | |
[[1B][0;32m OK [1B][0m] Started Login Service. | |
Starting Authorization Manager... | |
[[1B][0;32m OK [1B][0m] Reached target Sound Card. | |
[[1B][0;32m OK [1B][0m] Started LSB: Load kernel modules needed to enable cpufreq scaling. | |
Starting LSB: set CPUFreq kernel parameters... | |
[[1B][0;32m OK [1B][0m] Started Raise network interfaces. | |
[[1B][0;32m OK [1B][0m] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
Starting Load/Save RF Kill Switch Status... | |
[[1B][0;32m OK [1B][0m] Started Authorization Manager. | |
[ 2.859939] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high! | |
[ 2.901913] [BT_RFKILL]: ENABLE UART_RTS | |
[[1B][0;32m OK [1B][0m] Started LSB: set CPUFreq kernel parameters. | |
[[1B][0;32m OK [1B][0m] Started Disk Manager. | |
[[1B][0;32m OK [1B][0m] Started Daemon for power management. | |
[ 3.002822] [BT_RFKILL]: DISABLE UART_RTS | |
[ 3.003245] [BT_RFKILL]: bt turn on power | |
[[1B][0;32m OK [1B][0m] Started Load/Save RF Kill Switch Status. | |
[[1B][0;32m OK [1B][0m] Started Network Manager. | |
[[1B][0;32m OK [1B][0m] Reached target Network. | |
Starting Network Name Resolution... | |
Starting Permit User Sessions... | |
[[1B][0;32m OK [1B][0m] Reached target Network is Online. | |
Starting LSB: Advanced IEEE 802.11 management daemon... | |
Starting containerd container runtime... | |
Starting /etc/rc.local Compatibility... | |
[[1B][0;32m OK [1B][0m] Started containerd container runtime. | |
[ 2.961520] rc.local[595]: /etc/rc.local: 13: /etc/rc.local: rk_wifi_init: not found | |
[[1B][0;32m OK [1B][0m] Started LSB: Advanced IEEE 802.11 management daemon. | |
[[1B][0;32m OK [1B][0m] Started Permit User Sessions. | |
[[1B][0;1;31mFAILED[1B][0m] Failed to start /etc/rc.local Compatibility. | |
See 'systemctl status rc-local.service' for details. | |
Starting Light Display Manager... | |
[[1B][0;32m OK [1B][0m] Started Getty on tty1. | |
[[1B][0;32m OK [1B][0m] Started Serial Getty on ttyFIQ0. | |
[[1B][0;32m OK [1B][0m] Reached target Login Prompts. | |
Starting Docker Application Container Engine... | |
Starting Network Manager Script Dispatcher Service... | |
[[1B][0;32m OK [1B][0m] Started Network Manager Script Dispatcher Service. | |
[[1B][0;32m OK [1B][0m] Started Light Display Manager. | |
Starting Hostname Service... | |
[[1B][0;32m OK [1B][0m] Started Network Name Resolution. | |
[[1B][0;32m OK [1B][0m] Started Hostname Service. | |
[ 3.382186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
[ 3.382906] dhd_open: Enter ffffffc0002ff000 | |
[ 3.383288] | |
[ 3.383288] Dongle Host Driver, version 1.579.77.41.2 (r) | |
[ 3.383907] wl_android_wifi_on in 1 | |
[ 3.384216] wl_android_wifi_on in 2: g_wifi_on=0 | |
[ 3.384628] wifi_platform_set_power = 1 | |
[ 3.384986] ======== PULL WL_REG_ON(-1) HIGH! ======== | |
[ 3.385444] [WLAN_RFKILL]: rockchip_wifi_power: 1 | |
[ 3.385871] [WLAN_RFKILL]: wifi turn on power. -1 | |
[ 3.673404] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.674251] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.675441] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.676411] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.677338] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.678267] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property | |
[ 3.686845] sdio_reset_comm(): | |
[ 3.701831] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
[ 3.718988] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) | |
[ 3.743832] random: nonblocking pool is initialized | |
[ 3.767983] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) | |
[ 3.771744] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 3.775564] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 3.781844] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) | |
[ 3.895684] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0) | |
[ 4.090699] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 123 | |
[ 4.091475] sdioh_start: set sd_f2_blocksize 256 | |
[ 4.092723] | |
[ 4.092723] | |
[ 4.092723] dhd_bus_devreset: == WLAN ON == | |
[ 4.093958] F1 signature read @0x18000000=0x17224356 | |
[ 4.099923] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2 | |
[ 4.101698] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 | |
[ 4.102447] dhd_bus_set_default_min_res_mask: Unhandled chip id | |
[ 4.105928] dhd_conf_read_config: Ignore config file /system/etc/firmware/config.txt | |
[ 4.106625] Final fw_path=/system/etc/firmware/fw_bcm4356a2_ag.bin | |
[ 4.107260] Final nv_path=/system/etc/firmware/nvram_ap6356.txt | |
[ 4.107806] Final clm_path=/system/etc/firmware/clm_bcmdhd.blob | |
[ 4.108324] Final conf_path=/system/etc/firmware/config.txt | |
[ 4.108855] dhd_set_bus_params: set use_rxchain 0 | |
[ 4.109268] dhd_set_bus_params: set txinrx_thres 128 | |
[ 4.109702] dhd_set_bus_params: set txglomsize 36 | |
[ 4.111906] dhd_os_open_image: /system/etc/firmware/fw_bcm4356a2_ag.bin (558327 bytes) open success | |
[ 4.170163] dhd_os_open_image: /system/etc/firmware/nvram_ap6356.txt (2840 bytes) open success | |
[ 4.171300] NVRAM version: AP6356S_NVRAM_V1.2_20170331 | |
[ 4.173193] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. | |
[ 4.230032] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) | |
[ 4.231880] bcmsdh_oob_intr_register HW_OOB irq=71 flags=0x4 | |
[ 4.232644] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist | |
[ 4.233405] dhd_get_memdump_info: MEMDUMP ENABLED = 2 | |
[ 4.235447] Disable tdls_auto_op failed. -1 | |
[ 4.235857] dhd_preinit_ioctls: Set tcpack_sup_mode 1 | |
[ 4.236906] dhd_apply_default_clm: Ignore clm file /system/etc/firmware/clm_bcmdhd.blob | |
[[1B][0;1;31mFAILED[1B][0m] Failed to start Docker Application Container Engine. | |
See 'systemctl status docker.service' for details. | |
[ 4.239374] Firmware up: op_mode=0x0005, MAC=cc:4b:73:27:0a:80 | |
[ 4.239997] dhd_conf_set_country: set country CN, revision 38 | |
[[1B][0;32m OK [1B][0m] Reached target Multi-User System. | |
[[1B][0;32m OK [1B][0m] Reached target Graphical Interface. | |
Starting Update UTMP about System Runlevel Changes... | |
[[1B][0;32m OK [1B][0m] Created slice User Slice of linaro. | |
Starting User Manager for UID 1000... | |
[[1B][0;32m OK [1B][0m] Started Session c1 of user linaro. | |
[[1B][0;32m OK [1B][0m] Started Update UTMP about System Runlevel Changes. | |
[ 4.277560] dhd_wlfc_enable: ret=0 | |
[ 4.277909] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created | |
[ 4.278544] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created | |
[ 4.280040] Country code: CN (CN/38) | |
[ 4.280812] dhd_conf_set_intiovar: set roam_off 1 | |
[ 4.284154] dhd_conf_set_intiovar: set txbf 1 | |
[ 4.285552] dhd_preinit_ioctls Set scancache failed -23 | |
[ 4.286290] dhd_conf_set_intiovar: set WLC_SET_FAKEFRAG 219 1 | |
[ 4.294655] Driver: 1.579.77.41.2 (r) | |
[ 4.294655] Firmware: wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d | |
[ 4.294655] CLM: 7.10.16 | |
[ 4.296390] dhd_txglom_enable: enable 1 | |
[ 4.296738] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=36, bus_txglom=-1 | |
[ 4.297476] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1 | |
[ 4.298169] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5 | |
[ 4.298772] sdioh_set_mode: set txglom_mode to copy | |
[ 4.299213] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1 | |
[ 4.303243] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 | |
[ 4.304137] dhd_conf_set_intiovar: set ampdu_hostreorder 1 | |
[ 4.305947] dhd_pno_init: Support Android Location Service | |
[[1B][0;32m OK [1B][0m] Started User Manager for UID 1000. | |
[ 4.314257] tty_port_close_start: tty->count = 1 port count = 2. | |
Debian GNU/Linux 9 linaro-alip ttyFIQ0 | |
linaro-alip login: root (automatic login) | |
[ 4.341327] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created | |
[ 4.342220] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 | |
[ 4.342968] dhd_rtt_init : FTM is not supported | |
[ 4.343380] dhd_preinit_ioctls: SensorHub diabled 0 | |
[ 4.344432] dhd_preinit_ioctls failed to set ShubHub disable | |
[ 4.345452] dhd_ndo_get_version: failed, retcode = -23 | |
[ 4.346489] dhd_wl_ioctl_get_intiovar: get int iovar wnm_bsstrans_resp failed, ERR -23 | |
[ 4.347212] failed to get wnm_bsstrans_resp | |
Last login: Mon Apr 1 22:25:41 UTC 2019 on ttyFIQ0 | |
[ 4.348318] failed to set WNM capabilities | |
[ 4.348693] wl_android_wifi_on: Success | |
Linux linaro-alip 4.4.103 #1 SMP Mon Apr 1 19:12:43 UTC 2019 aarch64 | |
The programs included with the Debian GNU/Linux system are free software; | |
the exact distribution terms for each program are described in the | |
individual files in /usr/share/doc/*/copyright. | |
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
permitted by applicable law. | |
[ 4.378070] dhd_open: Exit ret=0 | |
[ 4.436201] cfg80211: World regulatory domain updated: | |
[ 4.436671] cfg80211: DFS Master region: unset | |
[ 4.437098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
[ 4.437983] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 4.438692] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) | |
[ 4.439539] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 4.440269] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) | |
[ 4.441132] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) | |
[ 4.441997] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) | |
[ 4.442706] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 4.443446] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) | |
[ 4.481826] P2P interface registered | |
[ 4.482158] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc076a09400, wdev->net: (null) | |
[ 4.493877] WLC_E_IF: NO_IF set, event Ignored | |
[ 4.495428] P2P interface started | |
root@linaro-alip:~# [ 5.368136] dwhdmi-rockchip ff940000.hdmi: Rate 0 missing; compute N dynamically | |
[ 5.393442] dwhdmi-rockchip ff940000.hdmi: Rate 0 missing; compute N dynamically | |
[ 8.511323] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high! | |
[ 8.553929] [BT_RFKILL]: ENABLE UART_RTS | |
[ 8.655068] [BT_RFKILL]: DISABLE UART_RTS | |
[ 8.655530] [BT_RFKILL]: bt turn on power |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment