Last active
November 6, 2023 05:53
-
-
Save just-trey/040c43367b4f42588b48b68af886ec55 to your computer and use it in GitHub Desktop.
simple start / end print macro
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
print_end |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
M104 S0 ; Stops PrusaSlicer from sending temp waits separately | |
M140 S0 | |
print_start EXTRUDER=[first_layer_temperature[initial_extruder]] BED=[first_layer_bed_temperature] |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
print_start EXTRUDER={material_print_temperature_layer_0} BED={material_bed_temperature_layer_0} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
##################################################################### | |
# print_start macro | |
##################################################################### | |
[gcode_macro PRINT_START] | |
gcode: | |
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer. | |
{% set target_bed = params.BED|int %} | |
{% set target_extruder = params.EXTRUDER|int %} | |
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %} | |
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %} # This is not used but is the ycenter of the bed | |
SET_DISPLAY_TEXT MSG="Homing" # Displays info | |
G28 # Full home (XYZ) | |
G90 # Use absolute positioning | |
BED_MESH_CLEAR # Clears old saved bed mesh (if any) | |
SET_DISPLAY_TEXT MSG="Hotend: 150c" # Displays info | |
M104 S150 # Heats the nozzle to 150c | |
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info | |
M190 S{target_bed} # Sets the target temp for the bed | |
SET_DISPLAY_TEXT MSG="Z-tilt adjust" # Displays info | |
Z_TILT_ADJUST # Levels the buildplate via z_tilt_adjust | |
G28 Z # Homes Z after z_tilt_adjust | |
## Comment the below line if using bed mesh each print | |
BED_MESH_PROFILE LOAD="default" | |
## Uncomment for KAMP mesh (2 of 2) | |
# SET_DISPLAY_TEXT MSG="Creating Bed mesh" # Displays info | |
# BED_MESH_CALIBRATE # Starts bed mesh | |
# G28 Z # Homes Z after bed_mesh_calibrate | |
# Heats up the nozzle up to target via data from the slicer | |
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info | |
M107 # Turns off partcooling fan | |
M109 S{target_extruder} # Heats the nozzle to printing temp | |
# Do a purge line, then start the print | |
SET_DISPLAY_TEXT MSG="Printing" # Displays info | |
# Standard Purge | |
G0 X{x_wait - 50} Y4 F10000 # Moves to starting point | |
G0 Z0.4 # Raises Z to 0.4 | |
G91 # Incremental positioning | |
G1 X100 E20 F1000 # Purge line | |
# KAMP Purge | |
# LINE_PURGE | |
G90 # Absolut position | |
[gcode_macro PRINT_END] | |
gcode: | |
{% set x_park = printer.toolhead.axis_maximum.x|float - 3.0 %} | |
{% set y_park = printer.toolhead.axis_maximum.y|float - 3.0 %} | |
SET_DISPLAY_TEXT MSG="Finished Printing" | |
M104 S0 | |
M140 S0 | |
G92 E1 | |
G1 E-1 F300 #Retract the filament | |
G90 | |
G1 X{x_park} Y{y_park} F6000 | |
M18 # Unlock Stepper Motors |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment