Skip to content

Instantly share code, notes, and snippets.

@jesg

jesg/conf

Created March 17, 2016 02:42
Show Gist options
  • Save jesg/151a0bc291d893c90bb9 to your computer and use it in GitHub Desktop.
Save jesg/151a0bc291d893c90bb9 to your computer and use it in GitHub Desktop.
Download ZIP
i3wm
Raw
conf
# file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
#
# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
exec --no-startup-id ~/bin/monit22
exec --no-startup-id /usr/bin/pa-applet
exec --no-startup-id /usr/bin/nm-applet
exec --no-startup-id udisksvm
# exec --no-startup-id emacs --daemon --load ~/.emacs
exec --no-startup-id /usr/bin/mpd
exec --no-startup-id /usr/bin/sonata --hidden
exec --no-startup-id feh --bg-center ~/images/hobs-wal.jpg
# exec --no-startup-id i3-msg 'workspace 1; exec /usr/bin/firefox'
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
# font pango:DejaVu Sans Mono 10
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+h focus left
bindsym $mod+j focus down
bindsym $mod+k focus up
bindsym $mod+l focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+j move down
bindsym $mod+Shift+k move up
bindsym $mod+Shift+l move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+b split i
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command ~/bin/conky-i3bar
}
Raw
conky-i3bar
#!/bin/sh
# Send the header so that i3bar knows we want to use JSON:
echo '{"version":1}'
# Begin the endless array.
echo '['
# We send an empty first array of blocks to make the loop simpler:
echo '[],'
# Now send blocks with information forever:
exec conky -c $HOME/.conkyrc[
Raw
conkyrc
out_to_x no
own_window no
out_to_console yes
background no
max_text_width 0
# Update interval in seconds
update_interval 2.0
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Shortens units to a single character (kiB->k, GiB->G, etc.). Default is off.
short_units yes
# How strict should if_up be when testing an interface for being up?
# The value is one of up, link or address, to check for the interface
# being solely up, being up and having link or being up, having link
# and an assigned IP address.
if_up_strictness address
# Add spaces to keep things from moving about? This only affects certain objects.
# use_spacer should have an argument of left, right, or none
use_spacer left
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 4
# mpd settings
#mpd_host localhost
#mpd_port 6600
# Stuff after 'TEXT' will be formatted on screen
TEXT
# JSON for i3bar
# ${if_mpd_playing}
# { "full_text" : "${mpd_artist} - ${mpd_title}",
# "color" : "\#d466138"},
# ${endif}
[
{ "full_text" : "/ ${fs_free /}" , "color" : "\#dce7ed" },
{ "full_text" : "/home ${fs_free /home}" , "color" : "\#dce7ed" },
${if_up enp5s0}
{ "full_text" : "Wire ${addr enp5s0} \u2193${downspeedf enp5s0}k \u2191${upspeedf enp5s0}k",
"color" : "\#00FF00"},
${endif}
${if_up wlp3s0}
{ "full_text" : "Wifi ${wireless_link_qual_max} ${addr wlp3s0} \u2193${downspeedf wlp3s0}k \u2191${upspeedf wlp3s0}k",
"color" : "\#00FF00"},
${endif}
{ "full_text" : "IO \u2191${diskio_read} \u2193${diskio_write}", "color" : "\#dce7ed"},
{ "full_text" : "CPU ${cpu cpu}%", "color" : "\#dce7ed"},
{ "full_text" : "RAM ${memperc}%" , "color" :
${if_match ${memperc}<90}"\#ffffff"${else}"\#ff0000"${endif} },
{ "full_text" : "${battery_short} ${battery_time}", "color" : "\#dce7ed" },
{ "full_text" : "${time %F %R}", "color" : "\#ccffff"}
],[
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment