|
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c |
|
index 0a16529..da775ab 100644 |
|
--- a/board/ti/am335x/board.c |
|
+++ b/board/ti/am335x/board.c |
|
@@ -264,7 +264,7 @@ const struct dpll_params *get_dpll_ddr_params(void) |
|
|
|
if (board_is_evm_sk()) |
|
return &dpll_ddr3_303MHz[ind]; |
|
- else if (board_is_bone_lt() || board_is_icev2()) |
|
+ else if (board_is_pb() || board_is_bone_lt() || board_is_icev2()) |
|
return &dpll_ddr3_400MHz[ind]; |
|
else if (board_is_evm_15_or_later()) |
|
return &dpll_ddr3_303MHz[ind]; |
|
@@ -274,7 +274,7 @@ const struct dpll_params *get_dpll_ddr_params(void) |
|
|
|
static u8 bone_not_connected_to_ac_power(void) |
|
{ |
|
- if (board_is_bone()) { |
|
+ if (board_is_bone() && !board_is_pb()) { |
|
uchar pmic_status_reg; |
|
if (tps65217_reg_read(TPS65217_STATUS, |
|
&pmic_status_reg)) |
|
@@ -295,7 +295,7 @@ const struct dpll_params *get_dpll_mpu_params(void) |
|
if (bone_not_connected_to_ac_power()) |
|
freq = MPUPLL_M_600; |
|
|
|
- if (board_is_bone_lt()) |
|
+ if (board_is_pb() || board_is_bone_lt()) |
|
freq = MPUPLL_M_1000; |
|
|
|
switch (freq) { |
|
@@ -324,7 +324,7 @@ static void scale_vcores_bone(int freq) |
|
* Only perform PMIC configurations if board rev > A1 |
|
* on Beaglebone White |
|
*/ |
|
- if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) |
|
+ if (!board_is_pb() && board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) |
|
return; |
|
|
|
if (i2c_probe(TPS65217_CHIP_PM)) |
|
@@ -341,7 +341,7 @@ static void scale_vcores_bone(int freq) |
|
* Override what we have detected since we know if we have |
|
* a Beaglebone Black it supports 1GHz. |
|
*/ |
|
- if (board_is_bone_lt()) |
|
+ if (board_is_pb() || board_is_bone_lt()) |
|
freq = MPUPLL_M_1000; |
|
|
|
switch (freq) { |
|
@@ -387,9 +387,10 @@ static void scale_vcores_bone(int freq) |
|
|
|
/* |
|
* Set LDO3, LDO4 output voltage to 3.3V for Beaglebone. |
|
- * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black. |
|
+ * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black |
|
+ * and PocketBeagle. |
|
*/ |
|
- if (board_is_bone()) { |
|
+ if (board_is_bone() && !board_is_pb()) { |
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, |
|
TPS65217_DEFLS1, |
|
TPS65217_LDO_VOLTAGE_OUT_3_3, |
|
@@ -542,7 +543,7 @@ void sdram_init(void) |
|
if (board_is_evm_sk()) |
|
config_ddr(303, &ioregs_evmsk, &ddr3_data, |
|
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); |
|
- else if (board_is_bone_lt()) |
|
+ else if (board_is_pb() || board_is_bone_lt()) |
|
config_ddr(400, &ioregs_bonelt, |
|
&ddr3_beagleblack_data, |
|
&ddr3_beagleblack_cmd_ctrl_data, |
|
@@ -859,7 +860,7 @@ int board_eth_init(bd_t *bis) |
|
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) |
|
|
|
#ifdef CONFIG_DRIVER_TI_CPSW |
|
- if (board_is_bone() || board_is_bone_lt() || |
|
+ if ((board_is_bone() && !board_is_pb()) || board_is_bone_lt() || |
|
board_is_idk()) { |
|
writel(MII_MODE_ENABLE, &cdev->miisel); |
|
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = |
|
@@ -927,6 +928,8 @@ int board_fit_config_name_match(const char *name) |
|
{ |
|
if (board_is_gp_evm() && !strcmp(name, "am335x-evm")) |
|
return 0; |
|
+ else if (board_is_pb() && !strcmp(name, "am335x-pocketbeagle")) |
|
+ return 0; |
|
else if (board_is_bone() && !strcmp(name, "am335x-bone")) |
|
return 0; |
|
else if (board_is_bone_lt() && !strcmp(name, "am335x-boneblack")) |
|
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h |
|
index e13fcff..d8faa4b 100644 |
|
--- a/board/ti/am335x/board.h |
|
+++ b/board/ti/am335x/board.h |
|
@@ -24,6 +24,14 @@ |
|
#define EMIF_OCP_CONFIG_BEAGLEBONE_BLACK 0x00141414 |
|
#define EMIF_OCP_CONFIG_AM335X_EVM 0x003d3d3d |
|
|
|
+static inline int board_is_pb(void) |
|
+{ |
|
+/* |
|
+ return board_ti_is("A335PBGL"); |
|
+*/ |
|
+ return 1; |
|
+} |
|
+ |
|
static inline int board_is_bone(void) |
|
{ |
|
return board_ti_is("A335BONE"); |
|
@@ -41,7 +49,7 @@ static inline int board_is_bbg1(void) |
|
|
|
static inline int board_is_beaglebonex(void) |
|
{ |
|
- return board_is_bone() || board_is_bone_lt() || board_is_bbg1(); |
|
+ return board_is_pb() || board_is_bone() || board_is_bone_lt() || board_is_bbg1(); |
|
} |
|
|
|
static inline int board_is_evm_sk(void) |
|
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c |
|
index ad85b3a..8326735 100644 |
|
--- a/board/ti/am335x/mux.c |
|
+++ b/board/ti/am335x/mux.c |
|
@@ -341,7 +341,10 @@ static unsigned short detect_daughter_board_profile(void) |
|
void enable_board_pin_mux(void) |
|
{ |
|
/* Do board-specific muxes. */ |
|
- if (board_is_bone()) { |
|
+ if (board_is_pb()) { |
|
+ configure_module_pin_mux(mii1_pin_mux); |
|
+ configure_module_pin_mux(mmc0_pin_mux); |
|
+ } else if (board_is_bone()) { |
|
/* Beaglebone pinmux */ |
|
configure_module_pin_mux(mii1_pin_mux); |
|
configure_module_pin_mux(mmc0_pin_mux); |
|
diff --git a/configs/am335x_pocketbeagle_defconfig b/configs/am335x_pocketbeagle_defconfig |
|
new file mode 100644 |
|
index 0000000..0c94835 |
|
--- /dev/null |
|
+++ b/configs/am335x_pocketbeagle_defconfig |
|
@@ -0,0 +1,1033 @@ |
|
+# |
|
+# Automatically generated file; DO NOT EDIT. |
|
+# U-Boot 2017.09-rc1 Configuration |
|
+# |
|
+CONFIG_CREATE_ARCH_SYMLINK=y |
|
+# CONFIG_ARC is not set |
|
+CONFIG_ARM=y |
|
+# CONFIG_M68K is not set |
|
+# CONFIG_MICROBLAZE is not set |
|
+# CONFIG_MIPS is not set |
|
+# CONFIG_NDS32 is not set |
|
+# CONFIG_NIOS2 is not set |
|
+# CONFIG_PPC is not set |
|
+# CONFIG_SANDBOX is not set |
|
+# CONFIG_SH is not set |
|
+# CONFIG_X86 is not set |
|
+# CONFIG_XTENSA is not set |
|
+CONFIG_SYS_ARCH="arm" |
|
+CONFIG_SYS_CPU="armv7" |
|
+CONFIG_SYS_SOC="am33xx" |
|
+CONFIG_SYS_VENDOR="ti" |
|
+CONFIG_SYS_BOARD="am335x" |
|
+CONFIG_SYS_CONFIG_NAME="am335x_evm" |
|
+ |
|
+# |
|
+# ARM architecture |
|
+# |
|
+CONFIG_HAS_VBAR=y |
|
+CONFIG_HAS_THUMB2=y |
|
+CONFIG_ARM_ASM_UNIFIED=y |
|
+CONFIG_CPU_V7=y |
|
+CONFIG_SYS_ARM_ARCH=7 |
|
+CONFIG_SYS_CACHE_SHIFT_6=y |
|
+CONFIG_SYS_CACHELINE_SIZE=64 |
|
+# CONFIG_ARM_SMCCC is not set |
|
+# CONFIG_SEMIHOSTING is not set |
|
+CONFIG_SYS_THUMB_BUILD=y |
|
+CONFIG_SPL_SYS_THUMB_BUILD=y |
|
+# CONFIG_SYS_L2CACHE_OFF is not set |
|
+# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set |
|
+# CONFIG_ARM_CORTEX_CPU_IS_UP is not set |
|
+CONFIG_USE_ARCH_MEMCPY=y |
|
+CONFIG_SPL_USE_ARCH_MEMCPY=y |
|
+CONFIG_USE_ARCH_MEMSET=y |
|
+CONFIG_SPL_USE_ARCH_MEMSET=y |
|
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set |
|
+# CONFIG_ARCH_AT91 is not set |
|
+# CONFIG_TARGET_EDB93XX is not set |
|
+# CONFIG_TARGET_ASPENITE is not set |
|
+# CONFIG_TARGET_GPLUGD is not set |
|
+# CONFIG_ARCH_DAVINCI is not set |
|
+# CONFIG_KIRKWOOD is not set |
|
+# CONFIG_ARCH_MVEBU is not set |
|
+# CONFIG_TARGET_DEVKIT3250 is not set |
|
+# CONFIG_TARGET_WORK_92105 is not set |
|
+# CONFIG_TARGET_MX25PDK is not set |
|
+# CONFIG_TARGET_ZMX25 is not set |
|
+# CONFIG_TARGET_APF27 is not set |
|
+# CONFIG_TARGET_APX4DEVKIT is not set |
|
+# CONFIG_TARGET_XFI3 is not set |
|
+# CONFIG_TARGET_M28EVK is not set |
|
+# CONFIG_TARGET_MX23EVK is not set |
|
+# CONFIG_TARGET_MX28EVK is not set |
|
+# CONFIG_TARGET_MX23_OLINUXINO is not set |
|
+# CONFIG_TARGET_BG0900 is not set |
|
+# CONFIG_TARGET_SANSA_FUZE_PLUS is not set |
|
+# CONFIG_TARGET_SC_SPS_1 is not set |
|
+# CONFIG_ORION5X is not set |
|
+# CONFIG_TARGET_SPEAR300 is not set |
|
+# CONFIG_TARGET_SPEAR310 is not set |
|
+# CONFIG_TARGET_SPEAR320 is not set |
|
+# CONFIG_TARGET_SPEAR600 is not set |
|
+# CONFIG_TARGET_STV0991 is not set |
|
+# CONFIG_TARGET_X600 is not set |
|
+# CONFIG_TARGET_IMX31_PHYCORE is not set |
|
+# CONFIG_TARGET_IMX31_PHYCORE_EET is not set |
|
+# CONFIG_TARGET_MX31ADS is not set |
|
+# CONFIG_TARGET_MX31PDK is not set |
|
+# CONFIG_TARGET_WOODBURN is not set |
|
+# CONFIG_TARGET_WOODBURN_SD is not set |
|
+# CONFIG_TARGET_FLEA3 is not set |
|
+# CONFIG_TARGET_MX35PDK is not set |
|
+# CONFIG_ARCH_BCM283X is not set |
|
+# CONFIG_TARGET_VEXPRESS_CA15_TC2 is not set |
|
+# CONFIG_TARGET_VEXPRESS_CA5X2 is not set |
|
+# CONFIG_TARGET_VEXPRESS_CA9X4 is not set |
|
+# CONFIG_TARGET_BCM23550_W1D is not set |
|
+# CONFIG_TARGET_BCM28155_AP is not set |
|
+# CONFIG_TARGET_BCMCYGNUS is not set |
|
+# CONFIG_TARGET_BCMNSP is not set |
|
+# CONFIG_TARGET_BCMNS2 is not set |
|
+# CONFIG_ARCH_EXYNOS is not set |
|
+# CONFIG_ARCH_S5PC1XX is not set |
|
+# CONFIG_ARCH_HIGHBANK is not set |
|
+# CONFIG_ARCH_INTEGRATOR is not set |
|
+# CONFIG_ARCH_KEYSTONE is not set |
|
+CONFIG_ARCH_OMAP2PLUS=y |
|
+# CONFIG_ARCH_MESON is not set |
|
+# CONFIG_ARCH_MX7ULP is not set |
|
+# CONFIG_ARCH_MX7 is not set |
|
+# CONFIG_ARCH_MX6 is not set |
|
+# CONFIG_ARCH_MX5 is not set |
|
+# CONFIG_ARCH_RMOBILE is not set |
|
+# CONFIG_TARGET_S32V234EVB is not set |
|
+# CONFIG_ARCH_SNAPDRAGON is not set |
|
+# CONFIG_ARCH_SOCFPGA is not set |
|
+# CONFIG_ARCH_SUNXI is not set |
|
+# CONFIG_TARGET_TS4600 is not set |
|
+# CONFIG_ARCH_VF610 is not set |
|
+# CONFIG_ARCH_ZYNQ is not set |
|
+# CONFIG_ARCH_ZYNQMP is not set |
|
+# CONFIG_TEGRA is not set |
|
+# CONFIG_TARGET_VEXPRESS64_AEMV8A is not set |
|
+# CONFIG_TARGET_VEXPRESS64_BASE_FVP is not set |
|
+# CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM is not set |
|
+# CONFIG_TARGET_VEXPRESS64_JUNO is not set |
|
+# CONFIG_TARGET_LS2080A_EMU is not set |
|
+# CONFIG_TARGET_LS2080A_SIMU is not set |
|
+# CONFIG_TARGET_LS2080AQDS is not set |
|
+# CONFIG_TARGET_LS2080ARDB is not set |
|
+# CONFIG_TARGET_LS2081ARDB is not set |
|
+# CONFIG_TARGET_HIKEY is not set |
|
+# CONFIG_TARGET_POPLAR is not set |
|
+# CONFIG_TARGET_LS1012AQDS is not set |
|
+# CONFIG_TARGET_LS1012ARDB is not set |
|
+# CONFIG_TARGET_LS1012AFRDM is not set |
|
+# CONFIG_TARGET_LS1021AQDS is not set |
|
+# CONFIG_TARGET_LS1021ATWR is not set |
|
+# CONFIG_TARGET_LS1021AIOT is not set |
|
+# CONFIG_TARGET_LS1043AQDS is not set |
|
+# CONFIG_TARGET_LS1043ARDB is not set |
|
+# CONFIG_TARGET_LS1046AQDS is not set |
|
+# CONFIG_TARGET_LS1046ARDB is not set |
|
+# CONFIG_TARGET_H2200 is not set |
|
+# CONFIG_TARGET_ZIPITZ2 is not set |
|
+# CONFIG_TARGET_COLIBRI_PXA270 is not set |
|
+# CONFIG_ARCH_UNIPHIER is not set |
|
+# CONFIG_STM32 is not set |
|
+# CONFIG_ARCH_STI is not set |
|
+# CONFIG_ARCH_ROCKCHIP is not set |
|
+# CONFIG_TARGET_THUNDERX_88XX is not set |
|
+# CONFIG_ARCH_ASPEED is not set |
|
+CONFIG_SYS_TEXT_BASE=0x80800000 |
|
+CONFIG_TI_I2C_BOARD_DETECT=y |
|
+CONFIG_EEPROM_BUS_ADDRESS=0 |
|
+CONFIG_EEPROM_CHIP_ADDRESS=0x50 |
|
+CONFIG_TI_COMMON_CMD_OPTIONS=y |
|
+CONFIG_SPL_GPIO_SUPPORT=y |
|
+CONFIG_SPL_LIBCOMMON_SUPPORT=y |
|
+CONFIG_SPL_LIBGENERIC_SUPPORT=y |
|
+CONFIG_SYS_MALLOC_F_LEN=0x400 |
|
+# CONFIG_OMAP34XX is not set |
|
+# CONFIG_OMAP44XX is not set |
|
+# CONFIG_OMAP54XX is not set |
|
+# CONFIG_TI814X is not set |
|
+# CONFIG_TI816X is not set |
|
+# CONFIG_AM43XX is not set |
|
+CONFIG_AM33XX=y |
|
+CONFIG_SYS_MPUCLK=500 |
|
+# CONFIG_TI_SECURE_DEVICE is not set |
|
+CONFIG_CONS_INDEX=1 |
|
+CONFIG_TARGET_AM335X_EVM=y |
|
+# CONFIG_TARGET_AM335X_BALTOS is not set |
|
+# CONFIG_TARGET_AM335X_IGEP003X is not set |
|
+# CONFIG_TARGET_AM335X_SHC is not set |
|
+# CONFIG_TARGET_AM335X_SL50 is not set |
|
+# CONFIG_TARGET_BAV335X is not set |
|
+# CONFIG_TARGET_BRXRE1 is not set |
|
+# CONFIG_TARGET_BRPPT1 is not set |
|
+# CONFIG_TARGET_CHILIBOARD is not set |
|
+# CONFIG_TARGET_CM_T335 is not set |
|
+# CONFIG_TARGET_DRACO is not set |
|
+# CONFIG_TARGET_ETAMIN is not set |
|
+# CONFIG_TARGET_PCM051 is not set |
|
+# CONFIG_TARGET_PENGWYN is not set |
|
+# CONFIG_TARGET_PEPPER is not set |
|
+# CONFIG_TARGET_PXM2 is not set |
|
+# CONFIG_TARGET_RASTABAN is not set |
|
+# CONFIG_TARGET_RUT is not set |
|
+# CONFIG_TARGET_THUBAN is not set |
|
+CONFIG_ISW_ENTRY_ADDR=0x402F0400 |
|
+CONFIG_PUB_ROM_DATA_SIZE=0x8400 |
|
+# CONFIG_NOR is not set |
|
+CONFIG_SPL_MMC_SUPPORT=y |
|
+CONFIG_SPL_SERIAL_SUPPORT=y |
|
+# CONFIG_SPL_DRIVERS_MISC_SUPPORT is not set |
|
+CONFIG_SPL_LIBDISK_SUPPORT=y |
|
+# CONFIG_SPL_NAND_SUPPORT is not set |
|
+# CONFIG_SPL_SPI_FLASH_SUPPORT is not set |
|
+# CONFIG_SPL_SPI_SUPPORT is not set |
|
+CONFIG_SPL_WATCHDOG_SUPPORT=y |
|
+CONFIG_IDENT_STRING="" |
|
+# CONFIG_VIDEO is not set |
|
+CONFIG_SPL_STACK_R_ADDR=0x82000000 |
|
+CONFIG_SPL_FAT_SUPPORT=y |
|
+# CONFIG_ARMV7_LPAE is not set |
|
+# CONFIG_CMD_DEKBLOB is not set |
|
+# CONFIG_CMD_HDMIDETECT is not set |
|
+ |
|
+# |
|
+# ARM debug |
|
+# |
|
+# CONFIG_DEBUG_LL is not set |
|
+CONFIG_SMBIOS_PRODUCT_NAME="am335x" |
|
+# CONFIG_DEBUG_UART is not set |
|
+# CONFIG_AHCI is not set |
|
+ |
|
+# |
|
+# General setup |
|
+# |
|
+CONFIG_LOCALVERSION="" |
|
+CONFIG_LOCALVERSION_AUTO=y |
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y |
|
+CONFIG_DISTRO_DEFAULTS=y |
|
+CONFIG_SYS_MALLOC_F=y |
|
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 |
|
+CONFIG_EXPERT=y |
|
+CONFIG_SYS_MALLOC_CLEAR_ON_INIT=y |
|
+# CONFIG_TOOLS_DEBUG is not set |
|
+# CONFIG_PHYS_64BIT is not set |
|
+ |
|
+# |
|
+# Boot images |
|
+# |
|
+CONFIG_FIT=y |
|
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y |
|
+# CONFIG_FIT_SIGNATURE is not set |
|
+# CONFIG_FIT_VERBOSE is not set |
|
+# CONFIG_FIT_BEST_MATCH is not set |
|
+# CONFIG_SPL_FIT is not set |
|
+# CONFIG_SPL_FIT_SIGNATURE is not set |
|
+# CONFIG_SPL_LOAD_FIT is not set |
|
+# CONFIG_OF_BOARD_SETUP is not set |
|
+# CONFIG_OF_SYSTEM_SETUP is not set |
|
+# CONFIG_OF_STDOUT_VIA_ALIAS is not set |
|
+CONFIG_SYS_EXTRA_OPTIONS="" |
|
+CONFIG_ARCH_FIXUP_FDT_MEMORY=y |
|
+ |
|
+# |
|
+# API |
|
+# |
|
+# CONFIG_API is not set |
|
+ |
|
+# |
|
+# Boot timing |
|
+# |
|
+# CONFIG_BOOTSTAGE is not set |
|
+CONFIG_BOOTSTAGE_USER_COUNT=20 |
|
+CONFIG_BOOTSTAGE_RECORD_COUNT=30 |
|
+CONFIG_BOOTSTAGE_STASH_ADDR=0 |
|
+CONFIG_BOOTSTAGE_STASH_SIZE=0x1000 |
|
+ |
|
+# |
|
+# Boot media |
|
+# |
|
+# CONFIG_NAND_BOOT is not set |
|
+# CONFIG_ONENAND_BOOT is not set |
|
+# CONFIG_QSPI_BOOT is not set |
|
+# CONFIG_SATA_BOOT is not set |
|
+# CONFIG_SD_BOOT is not set |
|
+# CONFIG_SPI_BOOT is not set |
|
+ |
|
+# |
|
+# Environment |
|
+# |
|
+# CONFIG_ENV_IS_IN_DATAFLASH is not set |
|
+# CONFIG_ENV_IS_IN_EEPROM is not set |
|
+CONFIG_ENV_IS_IN_FAT=y |
|
+# CONFIG_ENV_IS_IN_FLASH is not set |
|
+# CONFIG_ENV_IS_IN_MMC is not set |
|
+# CONFIG_ENV_IS_IN_NAND is not set |
|
+# CONFIG_ENV_IS_IN_NVRAM is not set |
|
+# CONFIG_ENV_IS_IN_ONENAND is not set |
|
+# CONFIG_ENV_IS_IN_REMOTE is not set |
|
+# CONFIG_ENV_IS_IN_SPI_FLASH is not set |
|
+# CONFIG_ENV_IS_IN_UBI is not set |
|
+# CONFIG_ENV_IS_NOWHERE is not set |
|
+CONFIG_ENV_FAT_INTERFACE="mmc" |
|
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" |
|
+CONFIG_ENV_FAT_FILE="uboot.env" |
|
+CONFIG_BOOTDELAY=2 |
|
+ |
|
+# |
|
+# Console |
|
+# |
|
+CONFIG_MENU=y |
|
+# CONFIG_CONSOLE_RECORD is not set |
|
+# CONFIG_SILENT_CONSOLE is not set |
|
+# CONFIG_PRE_CONSOLE_BUFFER is not set |
|
+CONFIG_CONSOLE_MUX=y |
|
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y |
|
+# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set |
|
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y |
|
+CONFIG_SYS_CONSOLE_INFO_QUIET=y |
|
+# CONFIG_SYS_STDIO_DEREGISTER is not set |
|
+# CONFIG_FIT_EMBED is not set |
|
+CONFIG_DEFAULT_FDT_FILE="" |
|
+CONFIG_VERSION_VARIABLE=y |
|
+CONFIG_BOARD_LATE_INIT=y |
|
+CONFIG_DISPLAY_CPUINFO=y |
|
+CONFIG_DISPLAY_BOARDINFO=y |
|
+ |
|
+# |
|
+# Start-up hooks |
|
+# |
|
+# CONFIG_ARCH_EARLY_INIT_R is not set |
|
+CONFIG_ARCH_MISC_INIT=y |
|
+# CONFIG_BOARD_EARLY_INIT_F is not set |
|
+ |
|
+# |
|
+# Security support |
|
+# |
|
+CONFIG_HASH=y |
|
+ |
|
+# |
|
+# SPL / TPL |
|
+# |
|
+CONFIG_SUPPORT_SPL=y |
|
+CONFIG_SPL=y |
|
+CONFIG_SPL_BOARD_INIT=y |
|
+CONFIG_SPL_RAW_IMAGE_SUPPORT=y |
|
+CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y |
|
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
|
+CONFIG_SPL_STACK_R=y |
|
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x100000 |
|
+CONFIG_SPL_SEPARATE_BSS=y |
|
+# CONFIG_SPL_DISPLAY_PRINT is not set |
|
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y |
|
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 |
|
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set |
|
+# CONFIG_SPL_CPU_SUPPORT is not set |
|
+# CONFIG_SPL_CRYPTO_SUPPORT is not set |
|
+# CONFIG_SPL_HASH_SUPPORT is not set |
|
+# CONFIG_SPL_DMA_SUPPORT is not set |
|
+CONFIG_SPL_ENV_SUPPORT=y |
|
+# CONFIG_SPL_SAVEENV is not set |
|
+# CONFIG_SPL_ETH_SUPPORT is not set |
|
+CONFIG_SPL_EXT_SUPPORT=y |
|
+# CONFIG_SPL_FPGA_SUPPORT is not set |
|
+CONFIG_SPL_I2C_SUPPORT=y |
|
+# CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT is not set |
|
+# CONFIG_SPL_MTD_SUPPORT is not set |
|
+CONFIG_SPL_MUSB_NEW_SUPPORT=y |
|
+# CONFIG_SPL_NET_SUPPORT is not set |
|
+# CONFIG_SPL_NO_CPU_SUPPORT is not set |
|
+# CONFIG_SPL_NOR_SUPPORT is not set |
|
+# CONFIG_SPL_XIP_SUPPORT is not set |
|
+# CONFIG_SPL_ONENAND_SUPPORT is not set |
|
+CONFIG_SPL_OS_BOOT=y |
|
+# CONFIG_SPL_PCI_SUPPORT is not set |
|
+# CONFIG_SPL_PCH_SUPPORT is not set |
|
+# CONFIG_SPL_POST_MEM_SUPPORT is not set |
|
+CONFIG_SPL_POWER_SUPPORT=y |
|
+# CONFIG_SPL_RAM_SUPPORT is not set |
|
+# CONFIG_SPL_RTC_SUPPORT is not set |
|
+# CONFIG_SPL_SATA_SUPPORT is not set |
|
+# CONFIG_SPL_TIMER_SUPPORT is not set |
|
+# CONFIG_SPL_USB_HOST_SUPPORT is not set |
|
+# CONFIG_SPL_USB_GADGET_SUPPORT is not set |
|
+CONFIG_SPL_YMODEM_SUPPORT=y |
|
+ |
|
+# |
|
+# Command line interface |
|
+# |
|
+CONFIG_CMDLINE=y |
|
+CONFIG_HUSH_PARSER=y |
|
+CONFIG_SYS_PROMPT="=> " |
|
+ |
|
+# |
|
+# Autoboot options |
|
+# |
|
+CONFIG_AUTOBOOT=y |
|
+CONFIG_AUTOBOOT_KEYED=y |
|
+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" |
|
+# CONFIG_AUTOBOOT_ENCRYPTION is not set |
|
+CONFIG_AUTOBOOT_DELAY_STR="d" |
|
+CONFIG_AUTOBOOT_STOP_STR=" " |
|
+# CONFIG_AUTOBOOT_KEYED_CTRLC is not set |
|
+ |
|
+# |
|
+# FASTBOOT |
|
+# |
|
+CONFIG_FASTBOOT=y |
|
+CONFIG_USB_FUNCTION_FASTBOOT=y |
|
+CONFIG_CMD_FASTBOOT=y |
|
+# CONFIG_ANDROID_BOOT_IMAGE is not set |
|
+CONFIG_FASTBOOT_BUF_ADDR=0x81000000 |
|
+CONFIG_FASTBOOT_BUF_SIZE=0x07000000 |
|
+CONFIG_FASTBOOT_USB_DEV=0 |
|
+# CONFIG_FASTBOOT_FLASH is not set |
|
+ |
|
+# |
|
+# Commands |
|
+# |
|
+ |
|
+# |
|
+# Info commands |
|
+# |
|
+CONFIG_CMD_BDI=y |
|
+# CONFIG_CMD_CONFIG is not set |
|
+CONFIG_CMD_CONSOLE=y |
|
+# CONFIG_CMD_CPU is not set |
|
+# CONFIG_CMD_LICENSE is not set |
|
+ |
|
+# |
|
+# Boot commands |
|
+# |
|
+CONFIG_CMD_BOOTD=y |
|
+CONFIG_CMD_BOOTM=y |
|
+CONFIG_CMD_BOOTZ=y |
|
+CONFIG_CMD_BOOTEFI=y |
|
+CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y |
|
+# CONFIG_CMD_BOOTEFI_HELLO is not set |
|
+# CONFIG_CMD_BOOTMENU is not set |
|
+CONFIG_CMD_ELF=y |
|
+CONFIG_CMD_FDT=y |
|
+CONFIG_CMD_GO=y |
|
+CONFIG_CMD_RUN=y |
|
+CONFIG_CMD_IMI=y |
|
+# CONFIG_CMD_IMLS is not set |
|
+CONFIG_CMD_XIMG=y |
|
+# CONFIG_CMD_POWEROFF is not set |
|
+ |
|
+# |
|
+# Environment commands |
|
+# |
|
+CONFIG_CMD_ASKENV=y |
|
+CONFIG_CMD_EXPORTENV=y |
|
+CONFIG_CMD_IMPORTENV=y |
|
+CONFIG_CMD_EDITENV=y |
|
+# CONFIG_CMD_GREPENV is not set |
|
+CONFIG_CMD_SAVEENV=y |
|
+CONFIG_CMD_ENV_EXISTS=y |
|
+# CONFIG_CMD_ENV_CALLBACK is not set |
|
+# CONFIG_CMD_ENV_FLAGS is not set |
|
+ |
|
+# |
|
+# Memory commands |
|
+# |
|
+CONFIG_CMD_MEMORY=y |
|
+CONFIG_CMD_CRC32=y |
|
+# CONFIG_CRC32_VERIFY is not set |
|
+CONFIG_CMD_EEPROM=y |
|
+# CONFIG_CMD_EEPROM_LAYOUT is not set |
|
+# CONFIG_CMD_MD5SUM is not set |
|
+# CONFIG_CMD_SHA1SUM is not set |
|
+# CONFIG_LOOPW is not set |
|
+# CONFIG_CMD_MEMTEST is not set |
|
+# CONFIG_CMD_MX_CYCLIC is not set |
|
+# CONFIG_CMD_MEMINFO is not set |
|
+ |
|
+# |
|
+# Compression commands |
|
+# |
|
+# CONFIG_CMD_LZMADEC is not set |
|
+# CONFIG_CMD_UNZIP is not set |
|
+# CONFIG_CMD_ZIP is not set |
|
+ |
|
+# |
|
+# Device access commands |
|
+# |
|
+# CONFIG_CMD_CLK is not set |
|
+CONFIG_CMD_DM=y |
|
+# CONFIG_CMD_DEMO is not set |
|
+# CONFIG_CMD_IDE is not set |
|
+# CONFIG_CMD_IO is not set |
|
+# CONFIG_CMD_IOTRACE is not set |
|
+CONFIG_CMD_LOADB=y |
|
+CONFIG_CMD_LOADS=y |
|
+# CONFIG_CMD_FLASH is not set |
|
+CONFIG_CMD_GPT=y |
|
+# CONFIG_CMD_GPT_RENAME is not set |
|
+# CONFIG_CMD_ARMFLASH is not set |
|
+CONFIG_CMD_MMC=y |
|
+# CONFIG_CMD_NAND is not set |
|
+CONFIG_CMD_PART=y |
|
+CONFIG_CMD_SF=y |
|
+CONFIG_CMD_SPI=y |
|
+CONFIG_CMD_I2C=y |
|
+CONFIG_CMD_USB=y |
|
+CONFIG_CMD_DFU=y |
|
+CONFIG_CMD_USB_MASS_STORAGE=y |
|
+# CONFIG_CMD_FPGA is not set |
|
+# CONFIG_CMD_FPGAD is not set |
|
+# CONFIG_CMD_FUSE is not set |
|
+CONFIG_CMD_GPIO=y |
|
+# CONFIG_CMD_FDC is not set |
|
+# CONFIG_CMD_SATA is not set |
|
+ |
|
+# |
|
+# Shell scripting commands |
|
+# |
|
+CONFIG_CMD_ECHO=y |
|
+CONFIG_CMD_ITEST=y |
|
+CONFIG_CMD_SOURCE=y |
|
+# CONFIG_CMD_SETEXPR is not set |
|
+ |
|
+# |
|
+# Network commands |
|
+# |
|
+CONFIG_CMD_NET=y |
|
+# CONFIG_CMD_TFTPPUT is not set |
|
+# CONFIG_CMD_TFTPSRV is not set |
|
+# CONFIG_CMD_RARP is not set |
|
+CONFIG_CMD_DHCP=y |
|
+CONFIG_CMD_PXE=y |
|
+CONFIG_CMD_NFS=y |
|
+CONFIG_CMD_MII=y |
|
+CONFIG_CMD_PING=y |
|
+# CONFIG_CMD_CDP is not set |
|
+# CONFIG_CMD_SNTP is not set |
|
+# CONFIG_CMD_DNS is not set |
|
+# CONFIG_CMD_LINK_LOCAL is not set |
|
+# CONFIG_CMD_ETHSW is not set |
|
+ |
|
+# |
|
+# Misc commands |
|
+# |
|
+# CONFIG_CMD_BSP is not set |
|
+# CONFIG_CMD_BKOPS_ENABLE is not set |
|
+# CONFIG_CMD_CACHE is not set |
|
+# CONFIG_CMD_DISPLAY is not set |
|
+# CONFIG_CMD_LED is not set |
|
+# CONFIG_CMD_DATE is not set |
|
+CONFIG_CMD_TIME=y |
|
+# CONFIG_CMD_GETTIME is not set |
|
+CONFIG_CMD_MISC=y |
|
+# CONFIG_CMD_TIMER is not set |
|
+# CONFIG_CMD_QFW is not set |
|
+ |
|
+# |
|
+# Power commands |
|
+# |
|
+ |
|
+# |
|
+# Security commands |
|
+# |
|
+# CONFIG_CMD_AES is not set |
|
+# CONFIG_CMD_BLOB is not set |
|
+# CONFIG_CMD_HASH is not set |
|
+ |
|
+# |
|
+# Firmware commands |
|
+# |
|
+ |
|
+# |
|
+# Filesystem commands |
|
+# |
|
+CONFIG_CMD_EXT2=y |
|
+CONFIG_CMD_EXT4=y |
|
+CONFIG_CMD_EXT4_WRITE=y |
|
+CONFIG_CMD_FAT=y |
|
+CONFIG_CMD_FS_GENERIC=y |
|
+# CONFIG_CMD_FS_UUID is not set |
|
+# CONFIG_CMD_JFFS2 is not set |
|
+# CONFIG_CMD_MTDPARTS is not set |
|
+ |
|
+# |
|
+# Debug commands |
|
+# |
|
+# CONFIG_CMD_BEDBUG is not set |
|
+# CONFIG_CMD_DIAG is not set |
|
+# CONFIG_CMD_KGDB is not set |
|
+# CONFIG_CMD_UBI is not set |
|
+ |
|
+# |
|
+# Partition Types |
|
+# |
|
+CONFIG_PARTITIONS=y |
|
+# CONFIG_MAC_PARTITION is not set |
|
+# CONFIG_SPL_MAC_PARTITION is not set |
|
+CONFIG_DOS_PARTITION=y |
|
+CONFIG_SPL_DOS_PARTITION=y |
|
+CONFIG_ISO_PARTITION=y |
|
+CONFIG_SPL_ISO_PARTITION=y |
|
+# CONFIG_AMIGA_PARTITION is not set |
|
+# CONFIG_SPL_AMIGA_PARTITION is not set |
|
+CONFIG_EFI_PARTITION=y |
|
+CONFIG_EFI_PARTITION_ENTRIES_OFF=0 |
|
+CONFIG_SPL_EFI_PARTITION=y |
|
+CONFIG_PARTITION_UUIDS=y |
|
+CONFIG_SPL_PARTITION_UUIDS=y |
|
+# CONFIG_PARTITION_TYPE_GUID is not set |
|
+CONFIG_SUPPORT_OF_CONTROL=y |
|
+ |
|
+# |
|
+# Device Tree Control |
|
+# |
|
+# CONFIG_OF_CONTROL is not set |
|
+# CONFIG_OF_BOARD_FIXUP is not set |
|
+CONFIG_NET=y |
|
+# CONFIG_NET_RANDOM_ETHADDR is not set |
|
+CONFIG_NETCONSOLE=y |
|
+CONFIG_NET_TFTP_VARS=y |
|
+CONFIG_BOOTP_PXE_CLIENTARCH=0x15 |
|
+CONFIG_BOOTP_VCI_STRING="U-Boot.armv7" |
|
+ |
|
+# |
|
+# Device Drivers |
|
+# |
|
+ |
|
+# |
|
+# Generic Driver Options |
|
+# |
|
+CONFIG_DM=y |
|
+CONFIG_SPL_DM=y |
|
+CONFIG_DM_WARN=y |
|
+CONFIG_DM_DEVICE_REMOVE=y |
|
+CONFIG_DM_STDIO=y |
|
+CONFIG_DM_SEQ_ALIAS=y |
|
+CONFIG_SPL_DM_SEQ_ALIAS=y |
|
+# CONFIG_REGMAP is not set |
|
+# CONFIG_SPL_REGMAP is not set |
|
+# CONFIG_DEVRES is not set |
|
+CONFIG_DM_DEV_READ_INLINE=y |
|
+# CONFIG_ADC is not set |
|
+# CONFIG_ADC_EXYNOS is not set |
|
+# CONFIG_ADC_SANDBOX is not set |
|
+# CONFIG_SATA is not set |
|
+ |
|
+# |
|
+# SATA/SCSI device support |
|
+# |
|
+# CONFIG_BLK is not set |
|
+# CONFIG_BLOCK_CACHE is not set |
|
+# CONFIG_IDE is not set |
|
+ |
|
+# |
|
+# Clock |
|
+# |
|
+# CONFIG_CLK is not set |
|
+# CONFIG_CPU is not set |
|
+ |
|
+# |
|
+# Hardware crypto devices |
|
+# |
|
+# CONFIG_FSL_CAAM is not set |
|
+# CONFIG_SYS_FSL_SEC_BE is not set |
|
+# CONFIG_SYS_FSL_SEC_LE is not set |
|
+ |
|
+# |
|
+# Demo for driver model |
|
+# |
|
+# CONFIG_DM_DEMO is not set |
|
+ |
|
+# |
|
+# DFU support |
|
+# |
|
+CONFIG_USB_FUNCTION_DFU=y |
|
+CONFIG_DFU_TFTP=y |
|
+CONFIG_DFU_MMC=y |
|
+# CONFIG_DFU_NAND is not set |
|
+CONFIG_DFU_RAM=y |
|
+# CONFIG_DFU_SF is not set |
|
+ |
|
+# |
|
+# DMA Support |
|
+# |
|
+# CONFIG_DMA is not set |
|
+# CONFIG_TI_EDMA3 is not set |
|
+ |
|
+# |
|
+# FPGA support |
|
+# |
|
+# CONFIG_FPGA_ALTERA is not set |
|
+# CONFIG_FPGA_SOCFPGA is not set |
|
+# CONFIG_FPGA_XILINX is not set |
|
+ |
|
+# |
|
+# GPIO Support |
|
+# |
|
+CONFIG_DM_GPIO=y |
|
+# CONFIG_ALTERA_PIO is not set |
|
+# CONFIG_DWAPB_GPIO is not set |
|
+# CONFIG_AT91_GPIO is not set |
|
+# CONFIG_ATMEL_PIO4 is not set |
|
+# CONFIG_INTEL_BROADWELL_GPIO is not set |
|
+# CONFIG_INTEL_ICH6_GPIO is not set |
|
+# CONFIG_IMX_RGPIO2P is not set |
|
+# CONFIG_LPC32XX_GPIO is not set |
|
+# CONFIG_MSM_GPIO is not set |
|
+CONFIG_OMAP_GPIO=y |
|
+# CONFIG_ROCKCHIP_GPIO is not set |
|
+# CONFIG_TEGRA_GPIO is not set |
|
+# CONFIG_TEGRA186_GPIO is not set |
|
+# CONFIG_VYBRID_GPIO is not set |
|
+# CONFIG_DM_74X164 is not set |
|
+# CONFIG_DM_PCA953X is not set |
|
+# CONFIG_MPC85XX_GPIO is not set |
|
+ |
|
+# |
|
+# I2C support |
|
+# |
|
+# CONFIG_DM_I2C is not set |
|
+# CONFIG_DM_I2C_COMPAT is not set |
|
+# CONFIG_SYS_I2C_DW is not set |
|
+# CONFIG_SYS_I2C_IMX_LPI2C is not set |
|
+CONFIG_DM_KEYBOARD=y |
|
+# CONFIG_CROS_EC_KEYB is not set |
|
+# CONFIG_I8042_KEYB is not set |
|
+ |
|
+# |
|
+# LED Support |
|
+# |
|
+# CONFIG_LED is not set |
|
+# CONFIG_SPL_LED is not set |
|
+# CONFIG_LED_STATUS is not set |
|
+ |
|
+# |
|
+# Mailbox Controller Support |
|
+# |
|
+ |
|
+# |
|
+# Memory Controller drivers |
|
+# |
|
+ |
|
+# |
|
+# Multifunction device drivers |
|
+# |
|
+# CONFIG_MISC is not set |
|
+# CONFIG_CROS_EC is not set |
|
+# CONFIG_DS4510 is not set |
|
+# CONFIG_FSL_SEC_MON is not set |
|
+# CONFIG_MXC_OCOTP is not set |
|
+# CONFIG_NUVOTON_NCT6102D is not set |
|
+# CONFIG_PWRSEQ is not set |
|
+# CONFIG_PCA9551_LED is not set |
|
+# CONFIG_WINBOND_W83627 is not set |
|
+ |
|
+# |
|
+# MMC Host controller Support |
|
+# |
|
+CONFIG_MMC=y |
|
+# CONFIG_DM_MMC is not set |
|
+# CONFIG_SPL_MMC_TINY is not set |
|
+# CONFIG_MMC_DW is not set |
|
+# CONFIG_MMC_MXC is not set |
|
+# CONFIG_MMC_MXS is not set |
|
+# CONFIG_MMC_PCI is not set |
|
+CONFIG_MMC_OMAP_HS=y |
|
+# CONFIG_MMC_SDHCI is not set |
|
+ |
|
+# |
|
+# MTD Support |
|
+# |
|
+# CONFIG_MTD is not set |
|
+# CONFIG_MTD_NOR_FLASH is not set |
|
+ |
|
+# |
|
+# NAND Device Support |
|
+# |
|
+# CONFIG_NAND_DENALI is not set |
|
+# CONFIG_NAND_VF610_NFC is not set |
|
+# CONFIG_NAND_PXA3XX is not set |
|
+# CONFIG_NAND_ARASAN is not set |
|
+# CONFIG_NAND_ZYNQ is not set |
|
+ |
|
+# |
|
+# Generic NAND options |
|
+# |
|
+# CONFIG_SYS_NAND_U_BOOT_LOCATIONS is not set |
|
+# CONFIG_SPL_NAND_DENALI is not set |
|
+ |
|
+# |
|
+# SPI Flash Support |
|
+# |
|
+CONFIG_SPI_FLASH=y |
|
+# CONFIG_SPI_FLASH_BAR is not set |
|
+# CONFIG_SF_DUAL_FLASH is not set |
|
+# CONFIG_SPI_FLASH_ATMEL is not set |
|
+# CONFIG_SPI_FLASH_EON is not set |
|
+# CONFIG_SPI_FLASH_GIGADEVICE is not set |
|
+# CONFIG_SPI_FLASH_MACRONIX is not set |
|
+# CONFIG_SPI_FLASH_SPANSION is not set |
|
+# CONFIG_SPI_FLASH_STMICRO is not set |
|
+# CONFIG_SPI_FLASH_SST is not set |
|
+CONFIG_SPI_FLASH_WINBOND=y |
|
+CONFIG_SPI_FLASH_USE_4K_SECTORS=y |
|
+# CONFIG_SPI_FLASH_MTD is not set |
|
+ |
|
+# |
|
+# UBI support |
|
+# |
|
+# CONFIG_MTD_UBI is not set |
|
+# CONFIG_BITBANGMII is not set |
|
+# CONFIG_MV88E6352_SWITCH is not set |
|
+CONFIG_PHYLIB=y |
|
+# CONFIG_MV88E61XX_SWITCH is not set |
|
+# CONFIG_PHYLIB_10G is not set |
|
+# CONFIG_PHY_AQUANTIA is not set |
|
+# CONFIG_PHY_ATHEROS is not set |
|
+# CONFIG_PHY_BROADCOM is not set |
|
+# CONFIG_PHY_CORTINA is not set |
|
+# CONFIG_PHY_DAVICOM is not set |
|
+# CONFIG_PHY_ET1011C is not set |
|
+# CONFIG_PHY_LXT is not set |
|
+# CONFIG_PHY_MARVELL is not set |
|
+# CONFIG_PHY_MICREL is not set |
|
+# CONFIG_PHY_MSCC is not set |
|
+# CONFIG_PHY_NATSEMI is not set |
|
+# CONFIG_PHY_REALTEK is not set |
|
+# CONFIG_PHY_SMSC is not set |
|
+# CONFIG_PHY_TERANETICS is not set |
|
+# CONFIG_PHY_TI is not set |
|
+# CONFIG_PHY_VITESSE is not set |
|
+# CONFIG_PHY_XILINX is not set |
|
+# CONFIG_DM_ETH is not set |
|
+# CONFIG_NETDEVICES is not set |
|
+# CONFIG_PCI is not set |
|
+ |
|
+# |
|
+# PHY Subsystem |
|
+# |
|
+# CONFIG_PHY is not set |
|
+# CONFIG_SPL_PHY is not set |
|
+# CONFIG_MVEBU_COMPHY_SUPPORT is not set |
|
+ |
|
+# |
|
+# Pin controllers |
|
+# |
|
+# CONFIG_PINCTRL is not set |
|
+# CONFIG_SPL_PINCTRL is not set |
|
+ |
|
+# |
|
+# Power |
|
+# |
|
+ |
|
+# |
|
+# Power Domain Support |
|
+# |
|
+# CONFIG_DM_PMIC is not set |
|
+# CONFIG_PMIC_AS3722 is not set |
|
+# CONFIG_POWER_MC34VR500 is not set |
|
+# CONFIG_DM_REGULATOR is not set |
|
+# CONFIG_DM_PWM is not set |
|
+# CONFIG_PWM_SANDBOX is not set |
|
+# CONFIG_RAM is not set |
|
+ |
|
+# |
|
+# Remote Processor drivers |
|
+# |
|
+ |
|
+# |
|
+# Reset Controller Support |
|
+# |
|
+ |
|
+# |
|
+# Real Time Clock |
|
+# |
|
+# CONFIG_DM_RTC is not set |
|
+# CONFIG_SCSI is not set |
|
+ |
|
+# |
|
+# Serial drivers |
|
+# |
|
+CONFIG_BAUDRATE=115200 |
|
+CONFIG_REQUIRE_SERIAL_CONSOLE=y |
|
+CONFIG_SERIAL_PRESENT=y |
|
+CONFIG_SPL_SERIAL_PRESENT=y |
|
+CONFIG_DM_SERIAL=y |
|
+# CONFIG_SERIAL_IRQ_BUFFER is not set |
|
+CONFIG_SPL_DM_SERIAL=y |
|
+# CONFIG_TPL_DM_SERIAL is not set |
|
+# CONFIG_DEBUG_UART_SKIP_INIT is not set |
|
+# CONFIG_ALTERA_JTAG_UART is not set |
|
+# CONFIG_ALTERA_UART is not set |
|
+# CONFIG_ATMEL_USART is not set |
|
+# CONFIG_FSL_LPUART is not set |
|
+# CONFIG_MVEBU_A3700_UART is not set |
|
+CONFIG_SYS_NS16550=y |
|
+# CONFIG_MSM_SERIAL is not set |
|
+# CONFIG_PXA_SERIAL is not set |
|
+ |
|
+# |
|
+# Sound support |
|
+# |
|
+# CONFIG_SOUND is not set |
|
+ |
|
+# |
|
+# SPI Support |
|
+# |
|
+# CONFIG_DM_SPI is not set |
|
+# CONFIG_SOFT_SPI is not set |
|
+# CONFIG_FSL_ESPI is not set |
|
+# CONFIG_FSL_QSPI is not set |
|
+# CONFIG_TI_QSPI is not set |
|
+ |
|
+# |
|
+# SPMI support |
|
+# |
|
+# CONFIG_SPMI is not set |
|
+ |
|
+# |
|
+# System reset device drivers |
|
+# |
|
+# CONFIG_SYSRESET is not set |
|
+# CONFIG_SYSRESET_SYSCON is not set |
|
+# CONFIG_SYSRESET_WATCHDOG is not set |
|
+# CONFIG_DM_THERMAL is not set |
|
+ |
|
+# |
|
+# Timer Support |
|
+# |
|
+# CONFIG_TIMER is not set |
|
+ |
|
+# |
|
+# TPM support |
|
+# |
|
+CONFIG_USB=y |
|
+# CONFIG_DM_USB is not set |
|
+ |
|
+# |
|
+# USB Host Controller Drivers |
|
+# |
|
+# CONFIG_USB_XHCI_HCD is not set |
|
+# CONFIG_USB_EHCI_HCD is not set |
|
+# CONFIG_USB_OHCI_HCD is not set |
|
+# CONFIG_USB_UHCI_HCD is not set |
|
+# CONFIG_USB_DWC2 is not set |
|
+# CONFIG_USB_DWC3 is not set |
|
+ |
|
+# |
|
+# MUSB Controller Driver |
|
+# |
|
+CONFIG_USB_MUSB_HOST=y |
|
+CONFIG_USB_MUSB_GADGET=y |
|
+ |
|
+# |
|
+# ULPI drivers |
|
+# |
|
+ |
|
+# |
|
+# USB peripherals |
|
+# |
|
+CONFIG_USB_STORAGE=y |
|
+# CONFIG_USB_KEYBOARD is not set |
|
+CONFIG_USB_GADGET=y |
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set |
|
+# CONFIG_USB_GADGET_BCM_UDC_OTG_PHY is not set |
|
+# CONFIG_USB_GADGET_DWC2_OTG is not set |
|
+# CONFIG_CI_UDC is not set |
|
+CONFIG_USB_GADGET_VBUS_DRAW=2 |
|
+CONFIG_USB_GADGET_DUALSPEED=y |
|
+CONFIG_USB_GADGET_DOWNLOAD=y |
|
+CONFIG_G_DNL_MANUFACTURER="Texas Instruments" |
|
+CONFIG_G_DNL_VENDOR_NUM=0x0451 |
|
+CONFIG_G_DNL_PRODUCT_NUM=0xd022 |
|
+CONFIG_USBNET_DEVADDR="de:ad:be:ef:00:01" |
|
+ |
|
+# |
|
+# Graphics support |
|
+# |
|
+# CONFIG_DM_VIDEO is not set |
|
+# CONFIG_SYS_WHITE_ON_BLACK is not set |
|
+ |
|
+# |
|
+# TrueType Fonts |
|
+# |
|
+# CONFIG_VIDEO_VESA is not set |
|
+# CONFIG_VIDEO_LCD_ANX9804 is not set |
|
+# CONFIG_VIDEO_LCD_SSD2828 is not set |
|
+# CONFIG_VIDEO_MVEBU is not set |
|
+# CONFIG_DISPLAY is not set |
|
+# CONFIG_VIDEO_BRIDGE is not set |
|
+# CONFIG_LCD is not set |
|
+ |
|
+# |
|
+# Watchdog Timer Support |
|
+# |
|
+CONFIG_HW_WATCHDOG=y |
|
+# CONFIG_BCM2835_WDT is not set |
|
+CONFIG_OMAP_WATCHDOG=y |
|
+# CONFIG_ULP_WATCHDOG is not set |
|
+# CONFIG_WDT is not set |
|
+# CONFIG_PHYS_TO_BUS is not set |
|
+ |
|
+# |
|
+# File systems |
|
+# |
|
+# CONFIG_FS_CBFS is not set |
|
+CONFIG_FS_FAT=y |
|
+CONFIG_FAT_WRITE=y |
|
+CONFIG_FS_FAT_MAX_CLUSTSIZE=65536 |
|
+# CONFIG_FS_JFFS2 is not set |
|
+# CONFIG_FS_CRAMFS is not set |
|
+ |
|
+# |
|
+# Library routines |
|
+# |
|
+# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set |
|
+CONFIG_HAVE_PRIVATE_LIBGCC=y |
|
+CONFIG_USE_PRIVATE_LIBGCC=y |
|
+CONFIG_SYS_HZ=1000 |
|
+CONFIG_USE_TINY_PRINTF=y |
|
+CONFIG_REGEX=y |
|
+# CONFIG_LIB_RAND is not set |
|
+# CONFIG_SPL_TINY_MEMSET is not set |
|
+# CONFIG_CMD_DHRYSTONE is not set |
|
+ |
|
+# |
|
+# Security support |
|
+# |
|
+# CONFIG_AES is not set |
|
+# CONFIG_RSA is not set |
|
+# CONFIG_TPM is not set |
|
+ |
|
+# |
|
+# Hashing Support |
|
+# |
|
+CONFIG_SHA1=y |
|
+CONFIG_SHA256=y |
|
+# CONFIG_SHA_HW_ACCEL is not set |
|
+CONFIG_MD5=y |
|
+ |
|
+# |
|
+# Compression Support |
|
+# |
|
+# CONFIG_LZ4 is not set |
|
+# CONFIG_LZMA is not set |
|
+CONFIG_LZO=y |
|
+# CONFIG_ERRNO_STR is not set |
|
+CONFIG_OF_LIBFDT=y |
|
+CONFIG_OF_LIBFDT_OVERLAY=y |
|
+CONFIG_SPL_OF_LIBFDT=y |
|
+# CONFIG_FDT_FIXUP_PARTITIONS is not set |
|
+ |
|
+# |
|
+# System tables |
|
+# |
|
+CONFIG_GENERATE_SMBIOS_TABLE=y |
|
+CONFIG_SMBIOS_MANUFACTURER="ti" |
|
+CONFIG_EFI_LOADER=y |
|
+# CONFIG_UNIT_TEST is not set |
|
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h |
|
index fbab610..75c20bd 100644 |
|
--- a/include/configs/am335x_evm.h |
|
+++ b/include/configs/am335x_evm.h |
|
@@ -60,7 +60,10 @@ |
|
#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ |
|
"bootcmd_" #devtypel #instance "=" \ |
|
"setenv mmcdev " #instance"; "\ |
|
- "setenv bootpart " #instance":2 ; "\ |
|
+ "setenv bootpart " #instance":2; "\ |
|
+ "run mmcboot;"\ |
|
+ "setenv mmcdev " #instance"; "\ |
|
+ "setenv bootpart " #instance":1; "\ |
|
"run mmcboot\0" |
|
|
|
#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ |
|
@@ -134,7 +137,24 @@ |
|
"ramboot=echo Booting from ramdisk ...; " \ |
|
"run ramargs; " \ |
|
"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ |
|
+ "pb_eeprom_hdr=" \ |
|
+ "mw 82001000 ee3355aa; " \ |
|
+ "mw 82001004 35333341; " \ |
|
+ "mw 82001008 4c474250\0" \ |
|
+ "serverip=192.168.1.1\0" \ |
|
+ "ipaddr=192.168.1.2\0" \ |
|
+ "if_netconsole=ping $serverip\0" \ |
|
+ "start_netconsole=" \ |
|
+ "setenv ncip $serverip; " \ |
|
+ "setenv bootdelay 10; " \ |
|
+ "setenv stdin serial,nc; " \ |
|
+ "setenv stdout serial,nc; " \ |
|
+ "setenv stderr serial,nc; " \ |
|
+ "version\0" \ |
|
+ "preboot=run if_netconsole start_netconsole\0"\ |
|
"findfdt="\ |
|
+ "if test $board_name = A335PBGL; then " \ |
|
+ "setenv fdtfile am335x-pocketbeagle.dtb; fi; " \ |
|
"if test $board_name = A335BONE; then " \ |
|
"setenv fdtfile am335x-bone.dtb; fi; " \ |
|
"if test $board_name = A335BNLT; then " \ |
|
@@ -263,9 +283,14 @@ |
|
#define CONFIG_USB_MUSB_PIO_ONLY |
|
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT |
|
#define CONFIG_AM335X_USB0 |
|
-#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL |
|
#define CONFIG_AM335X_USB1 |
|
+#ifdef CONFIG_AM335X_USB_SWAP |
|
+#define CONFIG_AM335X_USB0_MODE MUSB_HOST |
|
+#define CONFIG_AM335X_USB1_MODE MUSB_PERIPHERAL |
|
+#else |
|
+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL |
|
#define CONFIG_AM335X_USB1_MODE MUSB_HOST |
|
+#endif |
|
|
|
#ifndef CONFIG_SPL_USBETH_SUPPORT |
|
/* Fastboot */ |
|
@@ -278,6 +303,7 @@ |
|
#define CONFIG_USB_ETHER |
|
#define CONFIG_USB_ETH_RNDIS |
|
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" |
|
+#define CONFIG_USB_FUNCTION_MASS_STORAGE |
|
#endif /* CONFIG_USB_MUSB_GADGET */ |
|
|
|
/* |
|
@@ -337,6 +363,17 @@ |
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) |
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
|
#define CONFIG_SYS_MMC_MAX_DEVICE 2 |
|
+#elif defined(CONFIG_SD_BOOT) |
|
+#define CONFIG_ENV_IS_IN_FAT |
|
+#define FAT_ENV_INTERFACE "mmc" |
|
+#define FAT_ENV_DEVICE_AND_PART "0:1" |
|
+#define FAT_ENV_FILE "uboot.env" |
|
+#ifndef CONFIG_FAT_WRITE |
|
+#define CONFIG_FAT_WRITE |
|
+#endif |
|
+#define FAT_ENV_DEVICE 0 |
|
+#define FAT_ENV_PART 1 |
|
+#define CONFIG_BOOT_PARTITION_ACCESS |
|
#elif defined(CONFIG_NOR_BOOT) |
|
#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ |
|
#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ |
|
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h |
|
index bf44121..f92bd67 100644 |
|
--- a/include/configs/ti_am335x_common.h |
|
+++ b/include/configs/ti_am335x_common.h |
|
@@ -39,7 +39,9 @@ |
|
#define CONFIG_MII /* Required in net/eth.c */ |
|
#endif |
|
|
|
+#ifndef CONFIG_DISABLE_CPSW |
|
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ |
|
+#endif |
|
/* |
|
* RTC related defines. To use bootcount you must set bootlimit in the |
|
* environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT |
|
diff --git a/include/environment/ti/mmc.h b/include/environment/ti/mmc.h |
|
index 4305ebd..b803ecc 100644 |
|
--- a/include/environment/ti/mmc.h |
|
+++ b/include/environment/ti/mmc.h |
|
@@ -23,9 +23,10 @@ |
|
"bootenvfile=uEnv.txt\0" \ |
|
"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ |
|
"env import -t ${loadaddr} ${filesize}\0" \ |
|
- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \ |
|
- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ |
|
- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ |
|
+ "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootdir}/${bootenvfile}; then echo Found ${bootdir}/${bootenvfile} in FAT partition; else load mmc ${mmcdev} ${loadaddr} ${bootdir}/${bootenvfile}; fi\0" \ |
|
+ "loadimage=if test -n ${uname_r}; then load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/vmlinuz-${uname_r}; run loadrd; else load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}; fi\0" \ |
|
+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/initrd.img-${uname_r}; setenv rdsize ${filesize}\0" \ |
|
+ "loadfdt=if test -n ${uname_r}; then load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtbs/${uname_r}/${fdtfile}; else load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}; fi;\0" \ |
|
"envboot=mmc dev ${mmcdev}; " \ |
|
"if mmc rescan; then " \ |
|
"echo SD/MMC found on device ${mmcdev};" \ |
|
@@ -45,7 +46,11 @@ |
|
"mmcloados=run args_mmc; " \ |
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ |
|
"if run loadfdt; then " \ |
|
- "bootz ${loadaddr} - ${fdtaddr}; " \ |
|
+ "if test -n ${uname_r}; then " \ |
|
+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ |
|
+ "else " \ |
|
+ "bootz ${loadaddr} - ${fdtaddr}; " \ |
|
+ "fi; " \ |
|
"else " \ |
|
"if test ${boot_fdt} = try; then " \ |
|
"bootz; " \ |
Hi, I want to enable RNDIS in uboot on BeagleBone Green Wireless.
Is this possible by configuring the latest uboot? (https://github.com/u-boot/u-boot)
I had spent a lot of time on the internet.
But can not find useful information.
If you know how to achieve this, please help~