Tanix TX6 with rtw_8822cs // second device is a NUC12 connected via 1Gb
tx6:~ # dmesg | more
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.12 (docker@28560942fd46) (aarch64-none-elf-gcc-12.2.0 (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT Sat Feb 25 20:41:36 UTC 2023
[ 0.000000] Machine model: Tanix TX6
...
[ 7.019860] rtw_8822cs mmc1:0001:1: WOW Firmware version 9.9.4, H2C version 15
[ 7.023515] rtw_8822cs mmc1:0001:1: Firmware version 9.9.14, H2C version 15
[ 7.852418] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8822
[ 7.857424] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cs_fw.bin
[ 7.873779] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cs_config.bin
...
[ 23.096233] wlan0: authenticate with xx
[ 26.219926] wlan0: send auth to xx (try 1/3)
[ 26.221833] wlan0: authenticated
[ 26.223720] wlan0: associate with xx (try 1/3)
[ 26.239429] wlan0: RX AssocResp from xx (capab=0x111 status=0 aid=2)
[ 26.304113] wlan0: associated
[ 26.327422] wlan0: Limiting TX power to 19 (22 - 3) dBm as advertised by xx
tx6:~ # iperf -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.42.63, port 41300
[ 5] local 192.168.42.236 port 5201 connected to 192.168.42.63 port 41302
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 3.57 MBytes 29.9 Mbits/sec
[ 5] 1.00-2.00 sec 3.65 MBytes 30.6 Mbits/sec
[ 5] 2.00-3.00 sec 5.60 MBytes 47.0 Mbits/sec
[ 5] 3.00-4.00 sec 6.20 MBytes 52.0 Mbits/sec
[ 5] 4.00-5.00 sec 5.83 MBytes 48.9 Mbits/sec
[ 5] 5.00-6.00 sec 7.05 MBytes 59.1 Mbits/sec
[ 5] 6.00-7.00 sec 7.14 MBytes 59.9 Mbits/sec
[ 5] 7.00-8.00 sec 7.12 MBytes 59.8 Mbits/sec
[ 5] 8.00-9.00 sec 7.42 MBytes 62.3 Mbits/sec
[ 5] 9.00-10.00 sec 7.34 MBytes 61.6 Mbits/sec
[ 5] 10.00-10.04 sec 451 KBytes 86.5 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.04 sec 61.4 MBytes 51.3 Mbits/sec receiver
tx6:~ # iperf -c 192.168.42.63
Connecting to host 192.168.42.63, port 5201
[ 5] local 192.168.42.236 port 59768 connected to 192.168.42.63 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 6.61 MBytes 55.4 Mbits/sec 0 380 KBytes
[ 5] 1.00-2.00 sec 6.20 MBytes 52.0 Mbits/sec 0 417 KBytes
[ 5] 2.00-3.00 sec 6.94 MBytes 58.2 Mbits/sec 0 458 KBytes
[ 5] 3.00-4.00 sec 5.89 MBytes 49.4 Mbits/sec 0 480 KBytes
[ 5] 4.00-5.00 sec 6.94 MBytes 58.2 Mbits/sec 0 507 KBytes
[ 5] 5.00-6.00 sec 7.00 MBytes 58.7 Mbits/sec 0 507 KBytes
[ 5] 6.00-7.00 sec 5.22 MBytes 43.8 Mbits/sec 0 507 KBytes
[ 5] 7.00-8.00 sec 6.20 MBytes 52.0 Mbits/sec 0 532 KBytes
[ 5] 8.00-9.00 sec 6.81 MBytes 57.2 Mbits/sec 0 532 KBytes
[ 5] 9.00-10.00 sec 6.14 MBytes 51.5 Mbits/sec 0 532 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 64.0 MBytes 53.6 Mbits/sec 0 sender
[ 5] 0.00-10.02 sec 62.4 MBytes 52.2 Mbits/sec receiver
iperf Done.
Tanix TX6 with rtw_8822bs // second device is a NUC12 connected via 1Gb
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.12 (docker@28560942fd46) (aarch64-none-elf-gcc-12.2.0 (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT Sat Feb 25 20:41:36 UTC 2023
[ 0.000000] Machine model: Tanix TX6
...
[ 8.495683] rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13
[ 8.551464] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822
[ 8.570754] Bluetooth: hci0: RTL: rom_version status=0 version=2
[ 8.570802] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822bs_fw.bin
[ 8.585613] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822bs_config.bin
[ 8.620451] Bluetooth: hci0: RTL: cfg_sz 75, total sz 24543
[ 9.720076] Bluetooth: hci0: RTL: fw version 0xaa89f793
[ 11.806712] wlan0: authenticate with xx
[ 11.806771] wlan0: 80 MHz not supported, disabling VHT
[ 12.184402] wlan0: send auth to xx (try 1/3)
[ 12.194501] wlan0: authenticated
[ 12.196183] wlan0: associate with xx (try 1/3)
[ 12.213927] wlan0: RX AssocResp from xx (capab=0x11 status=0 aid=6)
[ 12.248607] wlan0: associated
[ 12.351513] wlan0: Limiting TX power to 18 (21 - 3) dBm as advertised by xx
LibreELEC:~ # iperf -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.42.63, port 35878
[ 5] local 192.168.42.209 port 5201 connected to 192.168.42.63 port 35892
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 6.29 MBytes 52.8 Mbits/sec
[ 5] 1.00-2.00 sec 6.00 MBytes 50.3 Mbits/sec
[ 5] 2.00-3.00 sec 6.48 MBytes 54.3 Mbits/sec
[ 5] 3.00-4.00 sec 6.33 MBytes 53.1 Mbits/sec
[ 5] 4.00-5.00 sec 6.30 MBytes 52.8 Mbits/sec
[ 5] 5.00-6.00 sec 6.45 MBytes 54.1 Mbits/sec
[ 5] 6.00-7.00 sec 6.57 MBytes 55.1 Mbits/sec
[ 5] 7.00-8.00 sec 6.31 MBytes 52.9 Mbits/sec
[ 5] 8.00-9.00 sec 6.53 MBytes 54.8 Mbits/sec
[ 5] 9.00-10.00 sec 7.12 MBytes 59.7 Mbits/sec
[ 5] 10.00-10.00 sec 25.4 KBytes 47.7 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 64.4 MBytes 54.0 Mbits/sec receiver
LibreELEC:~ # iperf -c 192.168.42.63
Connecting to host 192.168.42.63, port 5201
[ 5] local 192.168.42.209 port 35908 connected to 192.168.42.63 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 7.00 MBytes 58.7 Mbits/sec 0 320 KBytes
[ 5] 1.00-2.00 sec 6.26 MBytes 52.5 Mbits/sec 0 364 KBytes
[ 5] 2.00-3.00 sec 6.38 MBytes 53.6 Mbits/sec 0 364 KBytes
[ 5] 3.00-4.00 sec 6.02 MBytes 50.5 Mbits/sec 0 382 KBytes
[ 5] 4.00-5.00 sec 6.38 MBytes 53.6 Mbits/sec 0 382 KBytes
[ 5] 5.00-6.00 sec 6.38 MBytes 53.6 Mbits/sec 0 382 KBytes
[ 5] 6.00-7.00 sec 5.96 MBytes 50.0 Mbits/sec 0 382 KBytes
[ 5] 7.00-8.00 sec 6.38 MBytes 53.6 Mbits/sec 0 382 KBytes
[ 5] 8.00-9.00 sec 6.08 MBytes 51.0 Mbits/sec 0 400 KBytes
[ 5] 9.00-10.00 sec 6.45 MBytes 54.1 Mbits/sec 0 400 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 63.3 MBytes 53.1 Mbits/sec 0 sender
[ 5] 0.00-10.03 sec 62.3 MBytes 52.0 Mbits/sec receiver
iperf Done.