Last active
August 2, 2017 08:35
-
-
Save dzindra/03acab55e3bd7ba3290c31660f1d1f4f to your computer and use it in GitHub Desktop.
Strv printer config
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r 1.36.2-prusa3d on Wed Aug 2 10:34:28 2017 | |
| [filament:Prusa PLA 1.75mm] | |
| bed_temperature = 55 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF14E2 | |
| filament_cost = 0 | |
| filament_density = 0 | |
| filament_diameter = 1.75 | |
| filament_max_volumetric_speed = 0 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_settings_id = | |
| filament_soluble = 0 | |
| filament_type = PLA | |
| first_layer_bed_temperature = 55 | |
| first_layer_temperature = 215 | |
| max_fan_speed = 100 | |
| min_fan_speed = 85 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 25 | |
| temperature = 210 | |
| [presets] | |
| filament = Prusa PLA 1.75mm.ini | |
| filament_1 = Prusa PLA 1.75mm | |
| filament_2 = Prusa PLA 1.75mm | |
| filament_3 = Prusa PLA 1.75mm | |
| print = 0.20mm NORMAL.ini | |
| printer = Original Prusa i3 MK2.ini | |
| [print:0.05mm DETAIL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 300 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| complete_objects = 0 | |
| default_acceleration = 500 | |
| dont_support_bridges = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 70% | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 800 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.5 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 30 | |
| interface_shells = 0 | |
| layer_height = 0.05 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 300 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 30 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.15 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.3 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1.5 | |
| support_material_speed = 30 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 35 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_walls = 0 | |
| threads = 4 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 15 | |
| travel_speed = 180 | |
| wipe_tower = 0 | |
| wipe_tower_per_color_wipe = 15 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 1000 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 25 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 70% | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.15 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 35 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_walls = 0 | |
| threads = 4 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 12 | |
| travel_speed = 120 | |
| wipe_tower = 0 | |
| wipe_tower_per_color_wipe = 15 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 1000 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 25 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 70% | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.15 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 35 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_walls = 0 | |
| threads = 4 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 9 | |
| travel_speed = 120 | |
| wipe_tower = 1 | |
| wipe_tower_per_color_wipe = 15 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm NORMAL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 70% | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.15 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 35 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_walls = 0 | |
| threads = 4 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 6 | |
| travel_speed = 120 | |
| wipe_tower = 1 | |
| wipe_tower_per_color_wipe = 15 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.35mm FAST] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 1000 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.6 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 70% | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.35 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.43 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.7 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.15 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 35 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 60% | |
| thin_walls = 0 | |
| threads = 4 | |
| top_infill_extrusion_width = 0.43 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| travel_speed = 120 | |
| wipe_tower = 1 | |
| wipe_tower_per_color_wipe = 15 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [printer:Original Prusa i3 MK2] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| max_layer_height = 0.25 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = | |
| octoprint_host = | |
| printer_notes = | |
| printer_settings_id = | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 3 | |
| retract_lift = 0.5 | |
| retract_lift_above = 1 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.0.12 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [settings] | |
| autocenter = |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment