Created
December 29, 2017 23:28
-
-
Save clee/2f87d5180faab8e79d1094d8667f96af to your computer and use it in GitHub Desktop.
TAZ6 start/end gcode for klipper
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ; | |
| M400 ; wait for moves to finish | |
| M104 S0 ; hotend off | |
| M107 ; fans off | |
| G91 ; relative positioning | |
| G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure | |
| G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more | |
| M117 Cooling please wait ; progress indicator message | |
| G90 ; absolute positioning | |
| G1 Y0 F3000 ; move to cooling position | |
| M190 R45 ; set bed to cool off | |
| G1 Y280 F3000 ; present finished print | |
| M84 ; steppers off | |
| G90 ; absolute positioning | |
| M117 Print complete ; progress indicator message | |
| ;{profile_string} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ;This profile is designed specifically for LulzBot TAZ 6 3D Printer | |
| ;Basic slice data: | |
| ;Sliced at: {day} {date} {time} | |
| ;Layer height: {layer_height} | |
| ;Walls: {wall_thickness} | |
| ;Fill: {fill_density} | |
| ;Estimated Print time: {print_time} | |
| ;Filament used: {filament_amount}m {filament_weight}g | |
| ;Filament cost: {filament_cost} | |
| ;G26 ; clear potential ''probe fail'' condition | |
| G21 ; set units to Millimetres | |
| M107 ; disable fans | |
| G90 ; absolute positioning | |
| M82 ; set extruder to absolute mode | |
| G92 E0 ; set extruder position to 0 | |
| M140 S{print_bed_temperature}; get bed heating up | |
| G28 X ; home X and Y | |
| G28 Y ; home X and Y | |
| G1 X-19 Y258 F1000 ; move to safe homing position | |
| M109 S160 ; soften filament for z homing | |
| G28 Z ; home Z | |
| G1 Z15 ; raise nozzle | |
| M104 S150 ; wipe temp | |
| G1 E-10 F100 ; suck up XXmm of filament | |
| G1 X-15 Y100 F3000 ; move above wiper pad | |
| G1 Z1 ; push nozzle into wiper | |
| G1 X-17 Y96 F1000 ; slow wipe | |
| G1 X-17 Y90 F1000 ; slow wipe | |
| G1 X-17 Y86 F1000 ; slow wipe | |
| G1 X-15 Y90 F1000 ; slow wipe | |
| G1 X-17 Y80 F1000 ; slow wipe | |
| G1 X-15 Y96 F1000 ; slow wipe | |
| G1 X-17 Y75 F2000 ; fast wipe | |
| G1 X-15 Y65 F2000 ; fast wipe | |
| G1 X-17 Y70 F2000 ; fast wipe | |
| G1 X-15 Y60 F2000 ; fast wipe | |
| G1 X-17 Y55 F2000 ; fast wipe | |
| G1 X-15 Y50 F2000 ; fast wipe | |
| G1 X-17 Y40 F2000 ; fast wipe | |
| G1 X-15 Y45 F2000 ; fast wipe | |
| G1 X-17 Y35 F2000 ; fast wipe | |
| G1 X-15 Y40 F2000 ; fast wipe | |
| G1 X-17 Y70 F2000 ; fast wipe | |
| G1 X-15 Y30 Z2 F2000 ; fast wipe | |
| G1 X-17 Y35 F2000 ; fast wipe | |
| G1 X-15 Y25 F2000 ; fast wipe | |
| G1 X-17 Y30 F2000 ; fast wipe | |
| G1 X-15 Y25 Z1.5 F1000 ; slow wipe | |
| G1 X-17 Y23 F1000 ; slow wipe | |
| G1 Z10 ; raise extruder | |
| M109 S150 ; heat to probe temp | |
| G1 X-9 Y-9 ; move above probe | |
| M204 S100 ; set accel for probing | |
| G29 ; probe sequence (for auto-leveling) | |
| M204 S500 ; set accel back to normal | |
| G1 X0 Y0 Z15 F5000 ; get out the way | |
| M400 ; clear buffer | |
| G4 S1 ; pause | |
| M117 Heating... ; LCD status message | |
| M140 S{print_bed_temperature}; get bed heating up | |
| M109 S{print_temperature} ; set extruder temp and wait | |
| M190 S{print_bed_temperature}; get bed temping up during first layer | |
| G1 Z2 E0 F75 ; extrude filament back into nozzle | |
| M117 TAZ Printing... ; LCD status message' |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment