Last active
January 1, 2024 20:27
-
-
Save bruxy70/e668e00e94b34bf699488fe1d8de379a to your computer and use it in GitHub Desktop.
ESPHome configuration for Vindriktning ESP32 kit https://www.laskakit.cz/laskakit-esp-vindriktning-esp-32-i2c/
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
substitutions: | |
device_name: air-quality | |
wifi_ssid: !secret wifi_ssid | |
wifi_password: !secret wifi_password | |
api_password: !secret api_password | |
ota_password: !secret ota_password | |
esphome: | |
name: ${device_name} | |
comment: IKEA LaskaKit ESP-VINDRIKTNING ESP-32 I2C | |
esp32: | |
board: nodemcu-32s | |
framework: | |
type: arduino | |
wifi: | |
ssid: ${wifi_ssid} | |
password: ${wifi_password} | |
api: | |
password: ${api_password} | |
ota: | |
password: ${ota_password} | |
logger: | |
uart: | |
rx_pin: 16 | |
tx_pin: 17 | |
baud_rate: 9600 | |
id: uart2 | |
sensor: | |
- platform: pm1006 | |
pm_2_5: | |
name: "Particulate Matter 2.5µm Concentration" | |
id: pm | |
accuracy_decimals: 1 | |
on_value: | |
then: | |
- if: | |
condition: | |
lambda: 'return x < 30;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 0 | |
range_to: 0 | |
red: 0.0 | |
green: 1.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- if: | |
condition: | |
lambda: 'return x > 90;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 0 | |
range_to: 0 | |
red: 1.0 | |
green: 0.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- light.addressable_set: | |
id: status | |
range_from: 0 | |
range_to: 0 | |
red: 1.0 | |
green: 0.72 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
uart_id: uart2 | |
update_interval: 20s | |
- platform: scd4x | |
co2: | |
name: "CO2" | |
id: co2 | |
on_value: | |
then: | |
- if: | |
condition: | |
lambda: 'return x < 1000;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 1 | |
range_to: 1 | |
red: 0.0 | |
green: 1.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- if: | |
condition: | |
lambda: 'return x > 1500;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 1 | |
range_to: 1 | |
red: 1.0 | |
green: 0.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- light.addressable_set: | |
id: status | |
range_from: 1 | |
range_to: 1 | |
red: 1.0 | |
green: 0.72 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
humidity: | |
name: "Humidity" | |
id: humidity | |
on_value: | |
then: | |
- if: | |
condition: | |
lambda: 'return x < 30;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 2 | |
range_to: 2 | |
red: 1.0 | |
green: 0.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- if: | |
condition: | |
lambda: 'return x > 60;' | |
then: | |
- light.addressable_set: | |
id: status | |
range_from: 2 | |
range_to: 2 | |
red: 0.0 | |
green: 0.0 | |
blue: 1.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
else: | |
- light.addressable_set: | |
id: status | |
range_from: 2 | |
range_to: 2 | |
red: 0.0 | |
green: 1.0 | |
blue: 0.0 | |
color_brightness: !lambda |- | |
return id(sun_elevation).state > 0 ? 1.0 : 0.5; | |
- platform: homeassistant | |
id: sun_elevation | |
entity_id: sun.sun | |
attribute: elevation | |
- platform: wifi_signal | |
name: "Air quality WiFi Signal Sensor" | |
entity_category: diagnostic | |
disabled_by_default: true | |
update_interval: 60s | |
switch: | |
- platform: gpio | |
pin: 12 | |
id: fan | |
restore_mode: ALWAYS_ON | |
disabled_by_default: true | |
entity_category: diagnostic | |
light: | |
- platform: neopixelbus | |
type: GRB | |
variant: WS2812 | |
pin: GPIO25 | |
num_leds: 3 | |
id: status | |
restore_mode: ALWAYS_ON | |
i2c: | |
sda: 21 | |
scl: 22 | |
scan: true | |
id: bus_a | |
button: | |
- platform: restart | |
name: "Restart ${device_name}" | |
disabled_by_default: true | |
entity_category: diagnostic | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment