Forked from mikejr83/PrusaSlicer-End-Mirror-Duplication.gcode
Created
June 6, 2021 12:41
-
-
Save av-jok/572bfbd5ba5682ba54f55fdba086a9b1 to your computer and use it in GitHub Desktop.
Various Custom G-Code for the Artist-D in Prusa Slicer
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
G91 ;Relative positioning | |
G0 E-2 F2700 ;Retract a bit | |
G0 E-2 Z0.2 F2400 ;Retract and raise Z | |
G0 X5 Y5 F3000 ;Wipe out | |
G0 Z10 ;Raise Z more | |
G90 ;Absolute positionning | |
G0 Y310 ;Present print | |
M106 S0 ;Turn-off fan | |
M104 S0 T0 ;Turn-off hotend 1 | |
M104 S0 T1 ;Turn-off hotend 2 | |
M140 S0 ;Turn-off bed | |
G28X ; Home x-carriages | |
M605 S1 ; Reset to auto-park | |
M84 X Y E ;Disable all steppers but Z |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
G91 ;Relative positioning | |
G0 E-2 F2700 ;Retract a bit | |
G0 E-2 Z0.2 F2400 ;Retract and raise Z | |
G0 X5 Y5 F3000 ;Wipe out | |
G0 Z10 ;Raise Z more | |
G90 ;Absolute positionning | |
{if current_extruder==0} | |
G0 X0 Y310 ;Present print | |
{else} | |
G0 X310 Y310 ;Present print | |
{endif} | |
M106 S0 ;Turn-off fan | |
M104 S0 T0 ;Turn-off hotend 1 | |
M104 S0 T1 ;Turn-off hotend 2 | |
M140 S0 ;Turn-off bed | |
G28X ; Home x-carriages | |
M84 X Y E ;Disable all steppers but Z |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; -- BEGIN - DUPLICATION MODE INITIALIZATION -- | |
M605 S1 ; AUTO-PARK MODE | |
T0 ; SET TOOL 0 | |
G28 ; HOME ALL AXIS | |
M605 S2 X155 ; SET DUPLICATION MODE AND NOZZLE OFFSET | |
G28 X ; HOME X AXIS | |
G1 X77.5 ; SET BOTH EXTRUDERS TO THE MIDDLE OF THEIR PRINT AREA | |
; -- END - DUPLICATION MODE INITIALIZATION | |
M140 S[first_layer_bed_temperature] ; Set Heat Bed temperature | |
M104 S[first_layer_temperature] ; Set Extruder temperature | |
M190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature | |
G1 Z15.0 F6000 ;Move the platform down 15mm | |
;Prime the extruder | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X10 Y20 Z0.3 F5000.0 ; Move to start position | |
M109 S[first_layer_temperature] ; Wait for Extruder temperature | |
G1 X10 Y200.0 Z0.2 F1500.0 E15 ; Draw the first line | |
G1 X10.3 Y200.0 Z0.2 F5000.0 ; Move to side a little | |
G1 X10.3 Y20 Z0.2 F1500.0 E30 ; Draw the second line | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X14 Y20 Z0.2 F5000.0 ; Move over to prevent blob squish |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; -- BEGIN - MIRROR MODE INITIALIZATION -- | |
M605 S1 | |
T0 | |
G28 | |
M605 S2 X155 | |
G28 X | |
G1 X77.5 | |
M605 S3 X155 | |
; -- END - MIRROR MODE INITIALIZATION | |
M140 S[first_layer_bed_temperature] ; Set Heat Bed temperature | |
M104 S[first_layer_temperature] ; Set Extruder temperature | |
M190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature | |
G1 Z15.0 F6000 ;Move the platform down 15mm | |
;Prime the extruder | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X10 Y20 Z0.3 F5000.0 ; Move to start position | |
M109 S[first_layer_temperature] ; Wait for Extruder temperature | |
G1 X10 Y200.0 Z0.2 F1500.0 E15 ; Draw the first line | |
G1 X10.3 Y200.0 Z0.2 F5000.0 ; Move to side a little | |
G1 X10.3 Y20 Z0.2 F1500.0 E30 ; Draw the second line | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X14 Y20 Z0.2 F5000.0 ; Move over to prevent blob squish |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
M605S1 ; Set to auto-park | |
T[initial_tool] | |
M140 S[first_layer_bed_temperature] ; Set Heat Bed temperature | |
M104 S[first_layer_temperature_[initial_tool]] ; Set Extruder temperature | |
G28 ;Home | |
M190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature | |
G1 Z15.0 F6000 ;Move the platform down 15mm | |
;Prime the extruder | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X10 Y20 Z0.3 F5000.0 ; Move to start position | |
M109 S[first_layer_temperature_[initial_tool]] ; Wait for Extruder temperature | |
G1 X10 Y200.0 Z0.2 F1500.0 E15 ; Draw the first line | |
G1 X10.3 Y200.0 Z0.2 F5000.0 ; Move to side a little | |
G1 X10.3 Y20 Z0.2 F1500.0 E30 ; Draw the second line | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X14 Y20 Z0.2 F5000.0 ; Move over to prevent blob squish |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; TOOL CHANGE ---START--- | |
T[next_extruder] | |
{if current_extruder != next_extruder} | |
M104 S175 T[current_extruder] | |
{endif} | |
{if layer_num==0} | |
M109 S[first_layer_temperature_[next_extruder]] T[next_extruder] ; Wait for Extruder temperature | |
{else} | |
M109 S[temperature_[next_extruder]] T[next_extruder] ; Wait for Extruder temperature | |
{endif} | |
; TOOL CHANGE ---END--- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment