Created
November 17, 2022 10:07
-
-
Save andrew-codechimp/280e3d48ab12190d3ddf57dae6ebb1a3 to your computer and use it in GitHub Desktop.
Gosund SP111 Smart Plug ESPHome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# | |
# gosund sp111 smart plug with power sensor | |
# | |
substitutions: | |
devicename: esphplug01 | |
upper_devicename: EsphPlug01 | |
# WiFi connection | |
wifi: | |
ssid: !secret wifi_ssid | |
password: !secret wifi_password | |
ap: | |
ssid: ${upper_devicename} | |
password: !secret ap_password | |
captive_portal: | |
# Enable over-the-air updates | |
ota: | |
# Enable Home Assistant API | |
api: | |
packages: | |
gosundplug: !include common/gosundplug.yaml | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# | |
# gosund sp111 smart plug with power sensor | |
# | |
esphome: | |
name: ${devicename} | |
platform: ESP8266 | |
board: esp8285 | |
esp8266_restore_from_flash: true | |
on_boot: | |
priority: -100 | |
then: | |
- if: | |
condition: | |
- lambda: 'return id(relay_startup_state);' | |
then: | |
- switch.turn_on: ${devicename}_relay | |
logger: | |
globals: | |
- id: led_enabled | |
type: bool | |
restore_value: yes | |
initial_value: "true" | |
- id: relay_startup_state | |
type: bool | |
restore_value: yes | |
initial_value: "false" | |
binary_sensor: | |
- platform: gpio | |
pin: | |
number: GPIO3 | |
inverted: True | |
name: ${upper_devicename} Power Button | |
on_press: | |
- switch.toggle: ${devicename}_relay | |
light: | |
- platform: status_led | |
id: led | |
restore_mode: ALWAYS_OFF | |
pin: | |
number: GPIO1 | |
inverted: True | |
switch: | |
- platform: gpio | |
name: ${upper_devicename} Relay | |
pin: GPIO14 | |
id: ${devicename}_relay | |
restore_mode: ALWAYS_OFF | |
on_turn_on: | |
then: | |
- if: | |
condition: | |
- lambda: 'return id(led_enabled);' | |
then: | |
- light.turn_on: led | |
on_turn_off: | |
- light.turn_off: led | |
- platform: template | |
name: ${upper_devicename} LED Enabled | |
entity_category: config | |
lambda: |- | |
if (id(led_enabled)) { | |
return true; | |
} else { | |
return false; | |
} | |
turn_on_action: | |
- globals.set: | |
id: led_enabled | |
value: 'true' | |
- if: | |
condition: | |
switch.is_on: ${devicename}_relay | |
then: | |
- light.turn_on: led | |
turn_off_action: | |
- light.turn_off: led | |
- globals.set: | |
id: led_enabled | |
value: 'false' | |
- platform: template | |
name: ${upper_devicename} relay power on state | |
entity_category: config | |
lambda: |- | |
if (id(relay_startup_state)) { | |
return true; | |
} else { | |
return false; | |
} | |
turn_on_action: | |
- globals.set: | |
id: relay_startup_state | |
value: 'true' | |
turn_off_action: | |
- globals.set: | |
id: relay_startup_state | |
value: 'false' | |
sensor: | |
- platform: hlw8012 | |
sel_pin: | |
number: GPIO12 | |
inverted: True | |
cf_pin: GPIO04 | |
cf1_pin: GPIO05 | |
current_resistor: 0.00221 | |
voltage_divider: 871 | |
current: | |
name: ${upper_devicename} Current | |
unit_of_measurement: A | |
voltage: | |
name: ${upper_devicename} Voltage | |
unit_of_measurement: V | |
power: | |
name: ${upper_devicename} Wattage | |
id: energy_temp_Wattage | |
unit_of_measurement: W | |
change_mode_every: 8 | |
update_interval: 10s | |
- platform: total_daily_energy | |
name: ${upper_devicename} Total Daily Energy | |
power_id: energy_temp_Wattage | |
restore: false | |
filters: | |
# Multiplication factor from W to kW is 0.001 | |
- multiply: 0.001 | |
unit_of_measurement: kWh | |
# Enable time component to reset energy at midnight | |
time: | |
- platform: sntp | |
id: my_time |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment