Skip to content

Instantly share code, notes, and snippets.

@TonyApuzzo

TonyApuzzo/hc1_berg_1_fail.txt

Created February 12, 2019 03:53
Show Gist options
  • Save TonyApuzzo/b6cb594add8140c4c3a6348f5427348d to your computer and use it in GitHub Desktop.
Save TonyApuzzo/b6cb594add8140c4c3a6348f5427348d to your computer and use it in GitHub Desktop.
Download ZIP
hc1_berg_1_fail.txt
Raw
hc1_berg_1_fail.txt
U-Boot 2018.07 (Feb 10 2019 - 07:16:24 +0000) for ODROID-XU3/XU4/HC1
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: hc1
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
Failed (-5)
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
3234 bytes read in 4 ms (789.1 KiB/s)
## Executing script at 50000000
switch to partitions #0, OK
mmc0 is current device
loading env...
MMC read: dev # 0, block # 1228816, count 16 ... 16 blocks read: OK
## Error: bad CRC, import failed
1060 bytes read in 3 ms (344.7 KiB/s)
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
36 bytes read in 2 ms (17.6 KiB/s)
56225 bytes read in 8 ms (6.7 MiB/s)
Found valid slot A, 2 attempts remaining
storing env...
MMC write: dev # 0, block # 1228816, count 16 ... 16 blocks written: OK
Loading kernel
7665280 bytes read in 618 ms (11.8 MiB/s)
Starting kernel
load_kernel=ext4load mmc 0:5 0x42000000 zImage
bootargs=zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory HPD=true vout=hdmi usbhid.quirks=0x0eef:
0x0005:0x0004 smsc95xx.macaddr=00:1e:06:61:7a:39 false root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait rauc.slot=A console=t
ty1 console=ttySAC2,115200
Unknown command 'dmc' - try 'help'
Kernel image @ 0x42000000 [ 0x000000 - 0x74f680 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Device Tree to 4ffef000, end 4ffffba0 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.19.15 (root@b7114a395522) (gcc version 7.3.0 (Buildroot 2018.11.1-g30b599ac)) #2 SMP PREEMPT Tue Feb 12
02:40:31 UTC 2019
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 128 MiB at 0xb6800000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x4a4 with crng_init=0
[ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s43020 r8192 d22516 u73728
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
[ 0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory HPD=true vout
=hdmi usbhid.quirks=0x0eef:0x0005:0x0004 smsc95xx.macaddr=00:1e:06:61:7a:39 false root=PARTUUID=48617373-06 rootfstype=squashfs ro roo
twait rauc.slot=A console=tty1 console=ttySAC2,115200
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1908228K/2074624K available (10240K kernel code, 789K rwdata, 2532K rodata, 1024K init, 329K bss, 35324K reserv
ed, 131072K cma-reserved, 1157120K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (11232 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 790 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 330 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000032] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
[ 0.001469] Console: colour dummy device 80x30
[ 0.002109] console [tty1] enabled
[ 0.002165] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002208] pid_max: default: 32768 minimum: 301
[ 0.002390] Security Framework initialized
[ 0.002523] AppArmor: AppArmor initialized
[ 0.002618] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002658] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003568] CPU: Testing write buffer coherency: ok
[ 0.004481] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.028053] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.028652] ARM CCI driver probed
[ 0.028897] Exynos MCPM support installed
[ 0.035990] rcu: Hierarchical SRCU implementation.
[ 0.051990] smp: Bringing up secondary CPUs ...
[ 0.084369] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.116331] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.148330] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.180312] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.180321] CPU4: Spectre v2: incorrect context switching function, system vulnerable
[ 0.212311] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.212318] CPU5: Spectre v2: incorrect context switching function, system vulnerable
[ 0.244293] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.244300] CPU6: Spectre v2: incorrect context switching function, system vulnerable
[ 0.276310] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.276318] CPU7: Spectre v2: incorrect context switching function, system vulnerable
[ 0.276508] smp: Brought up 1 node, 8 CPUs
[ 0.276558] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.276583] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[ 0.276612] CPU: This may indicate a broken bootloader or firmware.
[ 0.278045] devtmpfs: initialized
[ 0.296426] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 0.296993] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.297045] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.304176] pinctrl core: initialized pinctrl subsystem
[ 0.306962] NET: Registered protocol family 16
[ 0.309573] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.311146] audit: initializing netlink subsys (disabled)
[ 0.311486] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
[ 0.312425] cpuidle: using governor menu
[ 0.313314] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.313349] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.359461] EXYNOS5420 PMU initialized
[ 0.404344] random: fast init done
[ 0.459860] SCSI subsystem initialized
[ 0.460221] usbcore: registered new interface driver usbfs
[ 0.460308] usbcore: registered new interface driver hub
[ 0.460504] usbcore: registered new device driver usb
[ 0.461251] s3c-i2c 12c80000.i2c: slave address 0x00
[ 0.461287] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 0.461635] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 0.462145] media: Linux media interface: v0.10
[ 0.462210] videodev: Linux video capture interface: v2.00
[ 0.462368] pps_core: LinuxPPS API ver. 1 registered
[ 0.462392] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.462950] Advanced Linux Sound Architecture Driver Initialized.
[ 0.464550] clocksource: Switched to clocksource mct-frc
[ 0.540797] VFS: Disk quotas dquot_6.6.0
[ 0.540914] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.541720] AppArmor: AppArmor Filesystem Enabled
[ 0.556764] NET: Registered protocol family 2
[ 0.557685] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.557752] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.557870] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.558067] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.558339] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.558411] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.558888] NET: Registered protocol family 1
[ 0.559711] RPC: Registered named UNIX socket transport module.
[ 0.559743] RPC: Registered udp transport module.
[ 0.559763] RPC: Registered tcp transport module.
[ 0.559784] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.561623] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.562444] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.567268] Initialise system trusted keyrings
[ 0.567601] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.577710] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.578702] NFS: Registering the id_resolver key type
[ 0.578765] Key type id_resolver registered
[ 0.578786] Key type id_legacy registered
[ 0.578817] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.578881] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.586124] Key type asymmetric registered
[ 0.586161] Asymmetric key parser 'x509' registered
[ 0.586254] bounce: pool size: 64 pages
[ 0.586342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.586661] io scheduler noop registered
[ 0.586686] io scheduler deadline registered
[ 0.586921] io scheduler cfq registered (default)
[ 0.586948] io scheduler mq-deadline registered
[ 0.586969] io scheduler kyber registered
[ 0.589942] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
[ 0.590083] samsung-usb2-phy 12130000.phy: Linked as a consumer to regulator.0
[ 0.591147] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
[ 0.591254] exynos5_usb3drd_phy 12100000.phy: Linked as a consumer to regulator.0
[ 0.591295] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
[ 0.591704] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
[ 0.591826] exynos5_usb3drd_phy 12500000.phy: Linked as a consumer to regulator.0
[ 0.591866] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
[ 0.600912] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 0.600954] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.604234] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 0.604271] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.605406] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 0.605441] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 0.687385] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.690042] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[ 0.690558] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[ 0.691012] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[ 1.604680] console [ttySAC2] enabled
[ 1.608751] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[ 1.618969] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[ 1.625388] iommu: Adding device 14450000.mixer to group 0
[ 1.630350] exynos-mixer 14450000.mixer: Linked as a consumer to 14650000.sysmmu
[ 1.639081] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 1.645044] iommu: Adding device 10850000.g2d to group 1
[ 1.649570] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a60000.sysmmu
[ 1.656943] exynos-drm-g2d 10850000.g2d: Linked as a consumer to 10a70000.sysmmu
[ 1.666070] iommu: Adding device 11c00000.rotator to group 2
[ 1.670342] exynos-rotator 11c00000.rotator: Linked as a consumer to 11d40000.sysmmu
[ 1.696934] brd: module loaded
[ 1.713331] loop: module loaded
[ 1.715713] zram: Added device: zram0
[ 1.719336] zram: Added device: zram1
[ 1.722961] zram: Added device: zram2
[ 1.726847] libphy: Fixed MDIO Bus: probed
[ 1.730377] usbcore: registered new interface driver r8152
[ 1.735570] usbcore: registered new interface driver cdc_ether
[ 1.741353] usbcore: registered new interface driver cdc_subset
[ 1.749306] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.754425] ehci-exynos: EHCI EXYNOS driver
[ 1.758912] exynos-ehci 12110000.usb: EHCI Host Controller
[ 1.764049] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[ 1.772074] exynos-ehci 12110000.usb: irq 85, io mem 0x12110000
[ 1.792617] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 1.797513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.805440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.812619] usb usb1: Product: EHCI Host Controller
[ 1.817462] usb usb1: Manufacturer: Linux 4.19.15 ehci_hcd
[ 1.822921] usb usb1: SerialNumber: 12110000.usb
[ 1.828238] hub 1-0:1.0: USB hub found
[ 1.831321] hub 1-0:1.0: 3 ports detected
[ 1.836274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.841408] ohci-exynos: OHCI EXYNOS driver
[ 1.845788] exynos-ohci 12120000.usb: USB Host Controller
[ 1.850947] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[ 1.858721] exynos-ohci 12120000.usb: irq 85, io mem 0x12120000
[ 1.924885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 1.931727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.939104] usb usb2: Product: USB Host Controller
[ 1.943668] usb usb2: Manufacturer: Linux 4.19.15 ohci_hcd
[ 1.949125] usb usb2: SerialNumber: 12120000.usb
[ 1.954383] hub 2-0:1.0: USB hub found
[ 1.957493] hub 2-0:1.0: 3 ports detected
[ 1.963155] usbcore: registered new interface driver usb-storage
[ 1.967882] usbcore: registered new interface driver usbserial_generic
[ 1.974285] usbserial: USB Serial support registered for generic
[ 1.981019] mousedev: PS/2 mouse device common for all mice
[ 1.987233] i2c /dev entries driver
[ 2.010725] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 2.025911] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 2.082483] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 2.090372] IR NEC protocol handler initialized
[ 2.093501] IR RC5(x/sz) protocol handler initialized
[ 2.098497] IR RC6 protocol handler initialized
[ 2.103002] IR JVC protocol handler initialized
[ 2.107505] IR Sony protocol handler initialized
[ 2.112095] IR SANYO protocol handler initialized
[ 2.116779] IR Sharp protocol handler initialized
[ 2.121457] IR MCE Keyboard/mouse protocol handler initialized
[ 2.127264] IR XMP protocol handler initialized
[ 2.132594] iommu: Adding device 11f50000.jpeg to group 3
[ 2.137171] s5p-jpeg 11f50000.jpeg: Linked as a consumer to 11f10000.sysmmu
[ 2.144689] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
[ 2.151327] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
[ 2.158129] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ 2.163822] iommu: Adding device 11f60000.jpeg to group 4
[ 2.168613] usb 1-1: new high-speed USB device number 2 using exynos-ehci
[ 2.168964] s5p-jpeg 11f60000.jpeg: Linked as a consumer to 11f20000.sysmmu
[ 2.183146] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
[ 2.189875] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
[ 2.196692] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
[ 2.202929] iommu: Adding device 11000000.codec to group 5
[ 2.208070] s5p-mfc 11000000.codec: Linked as a consumer to 11200000.sysmmu
[ 2.214554] s5p-mfc 11000000.codec: Linked as a consumer to 11210000.sysmmu
[ 2.244490] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers
[ 2.252155] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 2.260752] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 2.271345] s5p-mfc 11000000.codec: decoder registered as /dev/video4
[ 2.277693] s5p-mfc 11000000.codec: encoder registered as /dev/video5
[ 2.286452] iommu: Adding device 13e00000.video-scaler to group 6
[ 2.291636] exynos-gsc 13e00000.video-scaler: Linked as a consumer to 13e80000.sysmmu
[ 2.299812] iommu: Adding device 13e10000.video-scaler to group 7
[ 2.305463] exynos-gsc 13e10000.video-scaler: Linked as a consumer to 13e90000.sysmmu
[ 2.317799] exynos-tmu 10060000.tmu: Linked as a consumer to regulator.7
[ 2.323286] thermal thermal_zone0: failed to read out thermal zone (-22)
[ 2.329771] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
[ 2.331984] usb 1-1: New USB device found, idVendor=05e3, idProduct=0738, bcdDevice= 5.67
[ 2.337207] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
[ 2.345343] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.345351] usb 1-1: Product: USB Storage
[ 2.345361] usb 1-1: SerialNumber: 000000000567
[ 2.354193] exynos-tmu 10064000.tmu: Linked as a consumer to regulator.7
[ 2.375810] thermal thermal_zone1: failed to read out thermal zone (-22)
[ 2.376450] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.382437] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
[ 2.389323] scsi host0: usb-storage 1-1:1.0
[ 2.395861] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
[ 2.396700] exynos-tmu 10068000.tmu: Linked as a consumer to regulator.7
[ 2.414907] thermal thermal_zone2: failed to read out thermal zone (-22)
[ 2.421435] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
[ 2.428869] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
[ 2.437632] exynos-tmu 1006c000.tmu: Linked as a consumer to regulator.7
[ 2.443725] thermal thermal_zone3: failed to read out thermal zone (-22)
[ 2.450288] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
[ 2.457722] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
[ 2.466488] exynos-tmu 100a0000.tmu: Linked as a consumer to regulator.7
[ 2.472615] thermal thermal_zone4: failed to read out thermal zone (-22)
[ 2.480216] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[ 2.488069] device-mapper: uevent: version 1.0.3
[ 2.492299] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 2.501389] cpu cpu0: Linked as a consumer to regulator.44
[ 2.505888] cpu cpu0: Dropping the link to regulator.44
[ 2.511706] cpu cpu0: Linked as a consumer to regulator.44
[ 2.519895] cpu cpu4: Linked as a consumer to regulator.40
[ 2.528742] sdhci: Secure Digital Host Controller Interface driver
[ 2.533524] sdhci: Copyright(c) Pierre Ossman
[ 2.538249] Synopsys Designware Multimedia Card Interface Driver
[ 2.545043] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[ 2.550766] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 2.557178] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 2.562434] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 87,64 bit host data width,64 deep fifo
[ 2.571770] dwmmc_exynos 12200000.mmc: Linked as a consumer to regulator.18
[ 2.578664] dwmmc_exynos 12200000.mmc: Linked as a consumer to regulator.3
[ 2.585543] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 2.609165] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.630799] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[ 2.636283] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 2.642729] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 2.648102] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 88,64 bit host data width,64 deep fifo
[ 2.657454] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.19
[ 2.664355] dwmmc_exynos 12220000.mmc: Linked as a consumer to regulator.13
[ 2.690053] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.716509] s5p-secss 10830000.sss: s5p-sss driver registered
[ 2.721620] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.727235] usbcore: registered new interface driver usbhid
[ 2.731835] usbhid: USB HID core driver
[ 2.738922] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[ 2.744785] exynos-bus soc:bus_wcore: Dropping the link to regulator.41
[ 2.758457] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[ 2.763098] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.764018] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[ 2.773619] mmc1: new high speed SDXC card at address 0001
[ 2.780336] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[ 2.786304] mmcblk1: mmc1:0001 JC2RT 59.6 GiB
[ 2.793515] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[ 2.808340] mmcblk1: p1 p2 < p5 p6 p7 p8 p9 > p3 p4
[ 2.809077] exynos-adc 12d10000.adc: Linked as a consumer to regulator.4
[ 2.827344] drop_monitor: Initializing network drop monitor service
[ 2.833374] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 2.838237] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 2.845662] IPVS: ipvs loaded.
[ 2.848440] IPVS: [rr] scheduler registered.
[ 2.853837] NET: Registered protocol family 10
[ 2.858274] Segment Routing with IPv6
[ 2.861467] NET: Registered protocol family 17
[ 2.865214] NET: Registered protocol family 15
[ 2.869704] Bridge firewalling registered
[ 2.873676] Key type dns_resolver registered
[ 2.878907] Registering SWP/SWPB emulation handler
[ 2.884066] registered taskstats version 1
[ 2.886742] Loading compiled-in X.509 certificates
[ 2.893326] Key type encrypted registered
[ 2.895879] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.939634] exynos-hdmi 14530000.hdmi: Linked as a consumer to regulator.6
[ 2.945837] exynos-hdmi 14530000.hdmi: Linked as a consumer to regulator.7
[ 2.952685] OF: graph: no port node found in /soc/hdmi@14530000
[ 2.960344] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[ 2.967156] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0b6790c)
[ 2.973370] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0b67fb0)
[ 2.980336] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
[ 2.988148] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0b68bf4)
[ 2.994666] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
[ 3.003051] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0b69480)
[ 3.009884] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.016463] [drm] No driver support for vblank timestamp query.
[ 3.022424] [drm] Cannot find any crtc or sizes
[ 3.028045] [drm] Cannot find any crtc or sizes
[ 3.031638] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[ 3.039533] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.9
[ 3.045628] exynos-dwc3 soc:usb3-0: Linked as a consumer to regulator.11
[ 3.052770] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
[ 3.058343] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 3.062821] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[ 3.070830] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.079811] xhci-hcd xhci-hcd.3.auto: irq 153, io mem 0x12000000
[ 3.086240] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.093966] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.101133] usb usb3: Product: xHCI Host Controller
[ 3.105978] usb usb3: Manufacturer: Linux 4.19.15 xhci-hcd
[ 3.111439] usb usb3: SerialNumber: xhci-hcd.3.auto
[ 3.117225] hub 3-0:1.0: USB hub found
[ 3.120043] hub 3-0:1.0: 1 port detected
[ 3.124300] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 3.129403] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[ 3.137013] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 3.143679] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.151791] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 3.159884] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.167071] usb usb4: Product: xHCI Host Controller
[ 3.171921] usb usb4: Manufacturer: Linux 4.19.15 xhci-hcd
[ 3.177381] usb usb4: SerialNumber: xhci-hcd.3.auto
[ 3.183025] hub 4-0:1.0: USB hub found
[ 3.186007] hub 4-0:1.0: 1 port detected
[ 3.191319] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.9
[ 3.197079] exynos-dwc3 soc:usb3-1: Linked as a consumer to regulator.11
[ 3.204015] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
[ 3.209310] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 3.214213] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[ 3.222192] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[ 3.231245] xhci-hcd xhci-hcd.6.auto: irq 154, io mem 0x12400000
[ 3.237581] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.245384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.252561] usb usb5: Product: xHCI Host Controller
[ 3.257407] usb usb5: Manufacturer: Linux 4.19.15 xhci-hcd
[ 3.262866] usb usb5: SerialNumber: xhci-hcd.6.auto
[ 3.268717] hub 5-0:1.0: USB hub found
[ 3.271477] hub 5-0:1.0: 1 port detected
[ 3.275738] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 3.280848] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[ 3.288455] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0 SuperSpeed
[ 3.295133] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.303231] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 3.311313] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.318503] usb usb6: Product: xHCI Host Controller
[ 3.323350] usb usb6: Manufacturer: Linux 4.19.15 xhci-hcd
[ 3.328808] usb usb6: SerialNumber: xhci-hcd.6.auto
[ 3.334596] hub 6-0:1.0: USB hub found
[ 3.337510] hub 6-0:1.0: 1 port detected
[ 3.344455] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 3.348725] rtc rtc1: invalid alarm value: 1900-1-3 0:0:0
[ 3.354259] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 3.363235] exynos-bus soc:bus_wcore: Linked as a consumer to regulator.41
[ 3.369042] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
[ 3.377812] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
[ 3.385662] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
[ 3.393963] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
[ 3.402284] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
[ 3.410659] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
[ 3.418679] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
[ 3.427034] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
[ 3.434784] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0567 PQ: 0 ANSI: 6
[ 3.435472] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
[ 3.443182] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.453512] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
[ 3.465546] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
[ 3.472924] scsi 0:0:0:1: Direct-Access Generic STORAGE DEVICE 0567 PQ: 0 ANSI: 6
[ 3.473729] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
[ 3.481235] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 3.489309] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.490150] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
[ 3.491155] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
[ 3.492227] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
[ 3.493730] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
[ 3.496076] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 3.539642] odroid-audio sound: snd_soc_register_card() failed: -517
[ 3.547216] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 3.547681] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 3.557679] odroid-audio sound: snd_soc_register_card() failed: -517
[ 3.564669] console [netcon0] enabled
[ 3.567585] netconsole: network logging started
[ 3.573310] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 3.581194] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 3.586041] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01 00:00:08 UTC (946684808)
[ 3.594455] odroid-audio sound: snd_soc_register_card() failed: -517
[ 3.617995] ALSA device list:
[ 3.619520] No soundcards found.
[ 3.629951] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
[ 3.640251] devtmpfs: mounted
[ 3.646109] Freeing unused kernel memory: 1024K
[ 3.649739] Run /sbin/init as init process
[ 3.780935] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 3.811257] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.01
[ 3.818534] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.825320] usb 4-1: Product: USB to SATA bridge
[ 3.830084] usb 4-1: Manufacturer: JMicron
[ 3.833937] usb 4-1: SerialNumber: DB00000000013B
[ 3.844127] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 3.849114] odroid-audio sound: snd_soc_register_card() failed: -517
[ 3.997462] systemd[1]: System time before build time, advancing clock.
[ 4.034693] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSE
TUP +GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 4.055348] systemd[1]: Detected architecture arm.
Welcome to HassOS 3.0!
[ 4.086263] systemd[1]: Set hostname to <hassio>.
[ 4.099948] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.105310] systemd[1]: Initializing machine ID from random generator.
[ 4.112299] systemd[1]: Installed transient /etc/machine-id file.
[ 4.440894] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.466176] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 4.473023] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 4.480066] usb 6-1: Product: USB 10/100/1000 LAN
[ 4.484709] usb 6-1: Manufacturer: Realtek
[ 4.488789] usb 6-1: SerialNumber: 000001000000
[ 4.519793] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 4.520722] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.524801] odroid-audio sound: snd_soc_register_card() failed: -517
[ 4.531283] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 4.556777] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.575799] systemd[1]: Starting HassOS ZRAM tmp...
Starting HassOS ZRAM tmp...
[ 4.592981] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 4.616883] systemd[1]: Reached target HassOS hardware targets.
[ OK ] Reached target HassOS hardware targets.
[ 4.637479] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ OK 4.659745] zram2: detected capacity change from 0 to 16777216
m] Listening on Journal Socket (/dev/log).
[ OK ] Reached target Remote File Systems.
[ OK ] Started Forward Password Requests to Wall Directory [ 4.703539] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using
xhci-hcd
Watch.
[ OK ] Reached target Paths.
[ OK ] Listening on Journal Socket.
Starting Create list of required st&ce nodes for the current kernel...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 4.795274] r8152 6-1:1.0 eth0: v1.09.9
[ 4.800947] odroid-audio sound: ASoC: CPU DAI (null) not registered
[ 4.805840] odroid-audio sound: snd_soc_register_card() failed: -517
Starting Journal Service...
[ OK ] Listening on initctl Compatibility Named Pipe.
Starting Remount Root and Kernel File Systems...
[ OK ] Listening on udev Control Socket.
Starting HassOS ZRAM var...
Starting HassOS ZRAM swap...[ 4.899729] zram1: detected capacity change from 0 to 33554432
Mounting POSIX Message Queue File System...
[ 4.928176] zram0: detected capacity change from 0 to 522326016
[ OK ] Listening on udev Kernel Socket.
Starting udev Coldplug all Devices...
Mounting Kernel Debug File System...
[ OK ] Created slice system-getty.slice.
[ OK ] Reached target HassOS zram targets.
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta&vice nodes for the current kernel.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started udev Kernel Device Manager.
[ 5.608162] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 5.613432] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 5.630087] odroid-audio sound: i2s-hifi <-> samsung-i2s mapping ok
[ 5.648674] dma-pl330 3880000.adma: PM domain MAU will not be powered off
[ 5.690390] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 5.697671] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 5.718833] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 5.730915] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ OK ] Started udev Coldplug all Devices.
[ 5.784997] scsi host1: uas
[ 5.787485] scsi 1:0:0:0: Direct-Access JMicron 3101 PQ: 0 ANSI: 6
[ 5.797273] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 5.798568] sd 1:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 5.809040] usbcore: registered new interface driver uas
[ 5.809046] sd 1:0:0:0: [sdc] 4096-byte physical blocks
[ 5.809313] sd 1:0:0:0: [sdc] Write Protect is off
[ 5.825355] sd 1:0:0:0: [sdc] Disabling FUA
[ 5.828347] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.845560] sdc: sdc1 sdc2
[ 5.850087] sd 1:0:0:0: [sdc] Attached SCSI disk
[ OK ] Found device /dev/ttySAC2.
[ OK ] Started HassOS ZRAM swap.
[ OK ] Found device /dev/zram0.
[ OK ] Found device /dev/zram1.
[ OK ] Found device /dev/zram2.
[ OK ] Found device /dev/disk/by-label/hassos-overlay.
[ OK ] Started HassOS ZRAM tmp.
[ 6.798265] random: crng init done
[ 6.800236] random: 7 urandom warning(s) missed due to ratelimiting
[ OK ] Started HassOS ZRAM var.
[ OK ] Found device /dev/disk/by-label/hassos-boot.
[ OK ] Found device Patriot_Burst hassos-data.
Starting HassOS data resizing...
Mounting HassOS overlay partition...
Mounting HassOS ZRAM var...
[ 10.008430] EXT4-fs (zram1): mounted filesystem without journal. Opts: nobarrier
Activating swap HassOS ZRAM swap...
[ 10.045544] EXT4-fs (mmcblk1p3): recovery complete
[ OK ] Reached [ 10.051485] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.051671] Adding 510080k swap on /dev/zram0. Priority:-2 extents:1 across:510080k SS
target Sound Card.
[ OK ] Activated swap HassOS ZRAM swap.
[ OK ] Mounted HassOS overlay partition.
[ OK ] Mounted HassOS ZRAM var.
[ 10.146299] sdc: sdc1 sdc2
[ 10.153973] hassos-expand[222]: [INFO] Update hassos-data partition 1
Mounting Bluetooth persistent state...
Mounting Kernel persistent m[ 10.182665] sdc: sdc1 sdc2
odules-load.d...
Mounting Dropbear persistent keys...
Mounting Docker persistent user...
Mounting Dropbear persistent user...
Mounting Docker persistent configuration...
Mounting Systemd persistent state...
Mounting Systemd persistent logging...
Mounting Udev persistent rules.d...
[ OK ] Reached target Swap.
Mounting Temporary Directory (/tmp)...
[ 10.370254] EXT4-fs (zram2): mounted filesystem without journal. Opts: nobarrier
[ OK ] Mounted Bluetooth persistent state.
[ OK ] Mounted Kernel persistent modules-load.d.
[ OK ] Mounted Dropbear persistent keys.
[ OK ] Mounted Docker persistent user.
[ OK ] Mounted Dropbear persistent user.
[ OK ] Mounted Docker persistent configuration.
[ OK ] Mounted Systemd persistent state.
[ OK ] Mounted Systemd persistent logging.
[ OK ] Mounted Udev persistent rules.d.
[ OK ] Mounted Temporary Directory (/tmp).
[ OK ] Reached target Local File Systems.
Mounting HassOS boot partition...
Starting Rebuild Journal Catalog...
Starting Retrigger udev rules after user rules mounted...
Starting Flush Journal to Persistent Storage...
[ 10.887977] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Starting Load/Save Random Seed...
Mounting Kernel Configuration File System...
Starting Apply Kernel Variables...
[ OK ] Mounted HassOS boot partition.
[ OK ] Started Rebuild Journal Catalog.
[ OK ] Started Load/Save Random Seed.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started Apply Kernel Variables.
Starting Update is Completed...
[ OK ] Started Update is Completed.
[ 11.178543] systemd-journald[152]: Received request to flush runtime journal from PID 1
[ 11.205195] sdc: sdc1 sdc2
[ OK ] Started Flush Journal to Persistent Storage.
[ 11.375749] hassos-expand[222]: The operation has completed successfully.
[ OK ] Started Retrigger udev rules after user rules mounted.
[ 11.681135] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 11.689190] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 11.699574] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
[ 11.707574] s5p_mfc_load_firmware:73: Firmware is not present in the /lib/firmware directory nor compiled in kernel
[ 12.397479] sdc: sdc1 sdc2
[ 12.401438] hassos-expand[222]: Setting name!
[ 12.416486] hassos-expand[222]: partNum is 0
[ 12.433009] hassos-expand[222]: The operation has completed successfully.
[ 12.452606] hassos-expand[222]: No problems found. 2014 free sectors (1007.0 KiB) available in 1
[ 12.472582] hassos-expand[222]: segments, the largest of which is 2014 (1007.0 KiB) in size.
[ 12.493061] hassos-expand[222]: [INFO] Resize hassos-data filesystem
[ 12.513881] hassos-expand[222]: e2fsck 1.44.4 (18-Aug-2018)
[ 12.532551] hassos-expand[222]: ext2fs_open2: Bad magic number in super-block
[FAILED] Failed to start HassOS data resizing.
[ 12.548861] See 'systemctl status hassos-expand.service' for details.hassos-expand
[222]: e2fsck: Superblock invalid, trying backup blocks...
[ 12.588450] hassos-expand[222]: e2fsck: Bad magic number in super-block while trying to open /dev/sdc1
[ 12.608624] hassos-expand[222]: The superblock could not be read or does not describe a valid ext2/ext3/ext4
[ 12.628703] hassos-expand[222]: filesystem. If the device is valid and it really contains an ext2/ext3/ext4
[ 12.648586] hassos-expand[222]: filesystem (and not swap or ufs or something else), then the superblock
[ 12.668786] hassos-expand[222]: is corrupt, and you might try running e2fsck with an alternate superblock:
[ 12.688725] hassos-expand[222]: e2fsck -b 8193 <device>
[ 12.708587] hassos-expand[222]: or
[ 12.720614] hassos-expand[222]: e2fsck -b 32768 <device>
[DEPEND] Dependency failed for HassOS data partition.
[DEPEND] Dependency failed for Docker persistent data.
[DEPEND] Dependency failed for Docker Application Container Engine.
[DEPEND] Dependency failed for Dropbear SSH daemon.
[DEPEND] Dependency failed for Serial Getty on ttySAC2.
[DEPEND] Dependency failed for HassOS supervisor.
[DEPEND] Dependency failed for Getty on tty1.
[DEPEND] Dependency failed for NetworkManager persistent data.
[DEPEND] Dependency failed for HassOS AppArmor.
Starting Create Volatile Files and Directories...
[ OK ] Reached target Login Prompts.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Mounting Hostname persistent configuration...
Mounting NetworkManager persistent system connections...
Mounting Timesyncd persistent configuration...
Mounting Hosts persistent configuration...
[ OK ] Mounted Hostname persistent configuration.
[ OK ] Mounted NetworkManager persistent system connections.
[ OK ] Mounted Timesyncd persistent configuration.
[ OK ] Mounted Hosts persistent configuration.
Starting Network Time Synchronization...
[ OK ] Reached target HassOS overlay targets.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started HassOS mark boot partition as good.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Starting Docker Socket for the API.
[ OK ] Reached target System Time Synchronized.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ OK ] Started Avahi DNS Configuration Daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
Starting HassOS persists journald...
Starting Rauc Update Service...
[ OK ] Started HassOS persists journald.
[ OK ] Started Rauc Update Service.
Starting Hostname Service...
[ OK ] Started Hostname Service.
[ OK ] Started Network Manager.
Starting Network Manager Script Dispatcher Service...
Starting Network Manager Wait Online...
[ OK ] Reached target Network.
Starting HassOS Configuration Manager...
[ OK ] Started Network Manager Script Dispatcher Service.
[ 15.051564] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.063177] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.089026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.094994] r8152 6-1:1.0 eth0: carrier on
[ OK ] Started HassOS Configuration Manager.
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Reached target Multi-User System.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Starting HassOS rauc good...
[ OK ] Started HassOS rauc good.
[ TIME ] Timed out waiting for device Patriot_Burst hassos-data.
[DEPEND] Dependency failed for HassOS data resizing.
[DEPEND] Dependency failed for HassOS data partition.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment