Alexander MicroSur

READ THIS FIRST

Adaptive bed mesh is merged into klipper master branch. You can use this feature without this custom macro. Official klipper adaptive bed mesh

This macro will dynamically changing the bed mesh area based on the size of the parts will be printed. The fw will only probe on the area that the part will be printed (plus mesh_area_offset value)

You need gateway 3(mgl03) connected to MiHome. And also ip and gateway token.

Via XiaomiGateway3 component.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}

Better overcurrent/short detection

There are still some checks from OFW left to implement.
Make 144MHz PWM stable

PWM can be clocked @ 144MHz straight from PLL (it's @ 72MHz right now), doubling the resolution. This might cause problems

	input_select:
	radio:
	name: Радио
	options: ['-']
	icon: mdi:radio

	python_script: # https://github.com/AlexxIT/PythonScriptsPro

	automation:
	trigger:

	#######################################################################################################################
	# The Unavailable Entities Sensor Package has been moved to it's own repository!
	# https://github.com/jazzyisj/unavailable-entities-sensor
	#######################################################################################################################