Skip to content

Instantly share code, notes, and snippets.

@LeisureLinux

LeisureLinux/LeisureLinux.vimrc

Last active November 5, 2021 16:52
Show Gist options
  • Save LeisureLinux/ed9149cf71b0a681d1a40f14527367e3 to your computer and use it in GitHub Desktop.
Save LeisureLinux/ed9149cf71b0a681d1a40f14527367e3 to your computer and use it in GitHub Desktop.
Download ZIP
LeisureLinux vimrc
Raw
LeisureLinux.vimrc
" ****************************************************************
" * LeisureLinux [In both BiliBili ID & WeChat ID] Vim Notes *
" * -- Copyright or Copyleft, that is a question. *
" * -- 2021.11.02, Shanghai, China *
" ****************************************************************
"
" 为更好的让初学者用好 Vim 插件 ，特别加注释，一个文档全搞定
" If nvim, put below three lines into ~/.config/nvim/init.vim
" set runtimepath^=~/.vim runtimepath+=~/.vim/after
" let &packpath = &runtimepath
" source ~/.vimrc
" ################################################################
" Tip 0: 如何使用本文件？(How to use this file?)
" * Step 1: 备份 ~/.vimrc 文件(Backup ~/.vimrc file first)
" * Step 2: 下载本文件：(Download this file)
" * $ curl -fLo ~/.vimrc \
" [ -x socks5://yourProxyServer:port/ \ ]
" https://raw.githubusercontent.com/LeisureLinux/VimPlugins/master/LeisureLinux.vimrc
" * Step 3: 安装 vim-plug 插件管理器(Install vim-plug, the manager)
" $ curl -fLo ~/.vim/autoload/plug.vim --create-dirs \
" https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
" ## 请注意 vim-prettier 的安装需要去 packpath 下
" * Step 4: 安装所有插件(Run :PlugInstall to install all Plugins)
" ## 选项一：$ vim +PlugInstall +qall --headless
" ## 选项二：如果有网络问题，可以直接下载已经打包好的文件(不保证最新)：
" https://github.com/LeisureLinux/VimPlugins/releases/download/v0.2.1/LeisureLinux_Plugins.tar.xz，然后直接解压： $ tar xf <filename> -C ~/.vim
"
" Tip 1: Ctr-D & Ctr-]
" * :h <搜索字符>Ctr-D 是万能药，例如： :h html<Ctr-D>
" * 帮助内的高亮字符，都可以按 Ctr+] 进入
" * 如果不理解里面的任何词汇，只需要 :h <keywords> 即可
"
" Tip 2: 选择不同的颜色主题(colorscheme)
" * :h colo 加空格，再按 Ctr-D 就可以选择不同的颜色主题了
" * :h colo 直接回车则显示当前默认 colorscheme
"
" Tip 3: 插件相关的命令
" * 操作系统启动时可以用 -c 或者 + 后加 vim 命令
" * $ vim +PlugInstall +qall --headless // 常用的安装插件的办法
" * 其他插件命令： :PlugStatus :PlugUpdate :PlugClean :PlugUpgrade
"
" Tip 4: 不要被 Tab 搞混了
" * Ctr-W + T 可以把窗口切换成全屏
" * :tabs 可以列出所有的 Tab
" * gt 在所有的 Tab 之间跳转，Ctr-W + w 则在窗口之间跳转
" * :tabe <filename> 可以在新的 Tab 编辑文件
" * CtrlP 插件里，直接回车默认是在当前窗口打开
" * 选中文件 Ctr-O 会提示打开的位置
" * NERDTree 插件， Ctr-N 选中文件，按 t 才是在 Tab 打开
"
" Tip 5: 调试（PDAC：Plan-Do-Act-Check 方法论）
" * 查看加载的脚本： :scripts
" * 查看最近的消息： :messages
" * 查看所有映射的键： :map
" * 检查配置健康状态： :checkhealth
" * 关于 debug 的帮助 :h debug ；启动 Debug $ vim -D
" * 如果遇到有些插件冲突需要调试，关闭所有插件可以用
" $ vim -u NONE
"
" Tip 6: 其他
" 默认的 <Leader> 是 "\"，例如格式化代码是 \p
" * let mapleader = ","
" * set timeoutlen = 1000
" **********************************************************
"
" 设置帮助文档语言为中文： cn
" Change 'cn' to 'en', if you want to read help in English.
" Run ':source %' will take affect immediately
set helplang=cn
" Vim
let g:indentLine_color_term = 239
" GVim
let g:indentLine_color_gui = '#A4E57E'
set guifont=DroidSansMono\ Nerd\ Font:h16
" Full screen support
set guioptions-=T "remove toolbar
set guioptions-=m "remove menu bar
set guioptions-=r "remove right-hand scroll bar
set guioptions-=L "remove left-hand scroll bar
" none X terminal
let g:indentLine_color_tty_light = 7 " (default: 4)
let g:indentLine_color_dark = 1 " (default: 2)
" Background (Vim, GVim)
let g:indentLine_bgcolor_term = 202
let g:indentLine_bgcolor_gui = '#FF5F00'
" 加载 vim-prettier from ~/.vim/pack/plugins/start
packloadall
" **********************************************************
" * 如果你要使用 Vundle 来安装，请使用本段内注释掉的语句
" * 然后在操作系统内运行 $ vim +"PluginInstall" +qa --headless
" * set the runtime path to include Vundle and initialize
" * set rtp+=~/.vim/bundle/Vundle.vim
" * alternatively, pass a path where Vundle should install plugins
" * call vundle#begin('~/some/path/here')
" * Plugin 'VundleVim/Vundle.vim'
" * call vundle#end() " required
" * filetype plugin indent on " required
" **********************************************************
call plug#begin('~/.vim/plugged')
"
"颜色主题，帮助:h gruvbox8
" Plug 'lifepillar/vim-gruvbox8'
"颜色主题 meta5
Plug 'christophermca/meta5'
" 中文帮助
Plug 'yianwillis/vimcdoc'
"
"SQL Format
Plug 'b4b4r07/vim-sqlfmt'
"需要 ctags 支持的代码标签支持，先生成 tags 文件，帮助:h taglist
Plug 'vim-scripts/taglist.vim'
"Git 仓库管理，帮助:h fugitive
Plug 'tpope/vim-fugitive'
"支持 git diff ，帮助:h gitgutter
Plug 'airblade/vim-gitgutter'
" Cmake 项目支持，帮助:h cmake
Plug 'cdelledonne/vim-cmake' "cmake
" sparkup 暂时无帮助
Plug 'rstacruz/sparkup', {'rtp': 'vim/'}
"
" vim-toml 暂时无帮助
" Plug 'cespare/vim-toml'
" editorconfig seemed not that help
" Plug 'editorconfig/editorconfig-vim'
" lightline seemed not that help as well
" Plug 'itchyny/lightline.vim'
" Plug 'mengelbrecht/lightline-bufferline'
" For commentary，是不是会有冲突？
" Plug 'tpope/vim-commentary'
"
"Golang Support
Plug 'fatih/vim-go', { 'do': ':GoUpdateBinaries' }
" Clang Coding Style 帮助:h clang-format
Plug 'rhysd/vim-clang-format'
"CSV File Support
Plug 'chrisbra/csv.vim'
" 模糊搜索支持， 帮助:h fzf
Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
Plug 'junegunn/fzf.vim'
" 对齐, 帮助:h easy-align
Plug 'junegunn/vim-easy-align'
" 必备：按下 Ctr-P 模糊搜索文件，帮助:h ctrlp
Plug 'ctrlpvim/ctrlp.vim' " fuzzy find files
" To be researched
Plug 'neoclide/coc.nvim', {'branch': 'release'}
"Languange Server Protocol
Plug 'prabirshrestha/vim-lsp'
" 制表符对齐 帮助:h tabular
Plug 'godlygeek/tabular'
" Markdown ，默认折叠， 帮助:h markdown
Plug 'plasticboy/vim-markdown'
" 语法分析器 Syntax and lint checking :h ale
Plug 'dense-analysis/ale'
" HTML/CSS 代码快写工具 帮助:h emmet
Plug 'mattn/emmet-vim'
"必备，树形目录<Ctr-N>，需要字体支持 帮助:h nerdtree
"不要忘记了，终端的字体也要用 Nerd Fonts
Plug 'scrooloose/nerdtree'
" 用 \cc 添加注释，帮助:h nerd
Plug 'scrooloose/nerdcommenter'
Plug 'tiagofumo/vim-nerdtree-syntax-highlight'
" Plug 'christoomey/vim-tmux-navigator'
Plug 'Xuyuanp/nerdtree-git-plugin'
" post install (yarn install | npm install) then load plugin only for editing supported files
Plug 'prettier/vim-prettier', { 'do': 'yarn install' }
" 'for': ['javascript', 'typescript', 'css', 'less', 'scss', 'json', 'graphql', 'markdown', 'vue', 'svelte', 'yaml', 'html'] }
" 语言支持， 帮助 :h polyglot
Plug 'sheerun/vim-polyglot'
"必备：各大区块显示 帮助:h vim-airline
Plug 'vim-airline/vim-airline'
Plug 'vim-airline/vim-airline-themes'
"显示开发图标，帮助:h devicons
"安装 Nerd Font 兼容的字体或者自己打补丁
"设置终端字体也必须为 Nerd 兼容 (或者设置 'guifont' 如果使用的是GUI 版本).
"一定要设置 set encoding=utf8
Plug 'ryanoasis/vim-devicons'
" Plug 'Yggdroot/indentLine'
" Plug 'HerringtonDarkholme/yats.vim' " TS Syntax
call plug#end()
" rtp is abbeviation of run time path
set rtp+=~/.fzf
"
" Start interactive EasyAlign in visual mode (e.g. vip<Enter>)
vmap <Enter> <Plug>(EasyAlign)
" Start interactive EasyAlign for a motion/text object (e.g. gaip)
nmap ga <Plug>(EasyAlign)
" taglist flag
let Tlist_Inc_Winwidth = 0
let g:sqlfmt_command = "sqlfmt"
"au User lsp_setup call lsp#register_server({
"\ 'name': 'php',
"\ 'cmd': {server_info->['php', expand('$HOME/vendor/bin/php-language-server.php')]},
"\ 'whitelist': ['php'],
"\ })
"autocmd FileType php setlocal omnifunc=lsp#complete
inoremap jk <ESC>
nmap <C-n> :NERDTreeToggle<CR>
vmap ++ <plug>NERDCommenterToggle
nmap ++ <plug>NERDCommenterToggle
set nocompatible
filetype on
set mouse=a
set number
set hidden
set cindent
set autoindent
set tabstop=4
set expandtab
set smartindent
set shiftwidth=4
set encoding=utf8
set history=5000
set clipboard=unnamedplus
"set cursorline
" open NERDTree automatically
autocmd StdinReadPre * let s:std_in=1
autocmd VimEnter * NERDTree
let g:NERDTreeGitStatusWithFlags = 1
let g:WebDevIconsUnicodeDecorateFolderNodes = 1
let g:NERDTreeGitStatusNodeColorization = 1
let g:NERDTreeColorMapCustom = {
\ "Staged" : "#0ee375",
\ "Modified" : "#d9bf91",
\ "Renamed" : "#51C9FC",
\ "Untracked" : "#FCE77C",
\ "Unmerged" : "#FC51E6",
\ "Dirty" : "#FFBD61",
\ "Clean" : "#87939A",
\ "Ignored" : "#808080"
\ }
let g:NERDTreeIgnore = ['^node_modules$']
" vim-prettier
" let g:prettier#quickfix_enabled = 0
" let g:prettier#quickfix_auto_focus = 0
" prettier command for coc
command! -nargs=0 Prettier :CocCommand prettier.formatFile
" run prettier on save
let g:prettier#autoformat = 0
autocmd BufWritePre *.js,*.jsx,*.mjs,*.ts,*.tsx,*.css,*.less,*.scss,*.json,*.graphql,*.md,*.vue,*.yaml,*.html PrettierAsync
" ctrlp
let g:ctrlp_user_command = ['.git/', 'git --git-dir=%s/.git ls-files -oc --exclude-standard']
let g:ctrlp_open_new_file = 't'
" j/k will move virtual lines (lines that wrap)
noremap <silent> <expr> j (v:count == 0 ? 'gj' : 'j')
noremap <silent> <expr> k (v:count == 0 ? 'gk' : 'k')
nnoremap <C-s> :w<CR>
nnoremap <C-Q> :wq<CR>
" shift+arrow selection
nmap <S-Up> v<Up>
nmap <S-Down> v<Down>
nmap <S-Left> v<Left>
nmap <S-Right> v<Right>
vmap <S-Up> <Up>
vmap <S-Down> <Down>
vmap <S-Left> <Left>
vmap <S-Right> <Right>
imap <S-Up> <Esc>v<Up>
imap <S-Down> <Esc>v<Down>
imap <S-Left> <Esc>v<Left>
imap <S-Right> <Esc>v<Right>
vmap <C-c> y<Esc>i
vmap <C-x> d<Esc>i
" map <C-v> pi
" imap <C-v> <Esc>pi
colorscheme spring
" sync open file with NERDTree
" " Check if NERDTree is open or active
function! IsNERDTreeOpen()
return exists("t:NERDTreeBufName") && (bufwinnr(t:NERDTreeBufName) != -1)
endfunction
" Call NERDTreeFind iff NERDTree is active, current window contains a modifiable
" file, and we're not in vimdiff
function! SyncTree()
if &modifiable && IsNERDTreeOpen() && strlen(expand('%')) > 0 && !&diff
NERDTreeFind
wincmd p
endif
endfunction
" Highlight currently open buffer in NERDTree
autocmd BufEnter * call SyncTree()
" coc config
let g:coc_global_extensions = [
\ 'coc-snippets',
\ 'coc-pairs',
\ 'coc-tsserver',
\ 'coc-eslint',
\ 'coc-prettier',
\ 'coc-json',
\ 'coc-python',
\ ]
" from readme
" if hidden is not set, TextEdit might fail.
set hidden " Some servers have issues with backup files, see #649 set nobackup set nowritebackup " Better display for messages set cmdheight=2 " You will have bad experience for diagnostic messages when it's default 4000.
set updatetime=300
" don't give |ins-completion-menu| messages.
set shortmess+=c
" always show signcolumns
set signcolumn=yes
" Use tab for trigger completion with characters ahead and navigate.
" Use command ':verbose imap <tab>' to make sure tab is not mapped by other plugin.
inoremap <silent><expr> <TAB>
\ pumvisible() ? "\<C-n>" :
\ <SID>check_back_space() ? "\<TAB>" :
\ coc#refresh()
inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
function! s:check_back_space() abort
let col = col('.') - 1
return !col || getline('.')[col - 1] =~# '\s'
endfunction
" Use <c-space> to trigger completion.
inoremap <silent><expr> <c-space> coc#refresh()
" Use <cr> to confirm completion, `<C-g>u` means break undo chain at current position.
" Coc only does snippet and additional edit on confirm.
inoremap <expr> <cr> pumvisible() ? "\<C-y>" : "\<C-g>u\<CR>"
" Or use `complete_info` if your vim support it, like:
" inoremap <expr> <cr> complete_nfo()["selected"] != "-1" ? "\<C-y>" : "\<C-g>u\<CR>"
" Use `[g` and `]g` to navigate diagnostics
nmap <silent> [g <Plug>(coc-diagnostic-prev)
nmap <silent> ]g <Plug>(coc-diagnostic-next)
" Remap keys for gotos
nmap <silent> gd <Plug>(coc-definition)
nmap <silent> gy <Plug>(coc-type-definition)
nmap <silent> gr <Plug>(coc-references)
" Use K to show documentation in preview window
nnoremap <silent> K :call <SID>show_documentation()<CR>
function! s:show_documentation()
if (index(['vim','help'], &filetype) >= 0)
execute 'h '.expand('<cword>')
else
call CocAction('doHover')
endif
endfunction
" Highlight symbol under cursor on CursorHold
autocmd CursorHold * silent call CocActionAsync('highlight')
" Remap for rename current word
nmap <F2> <Plug>(coc-rename)
" Remap for format selected region
xmap <leader>f <Plug>(coc-format-selected)
nmap <leader>f <Plug>(coc-format-selected)
augroup mygroup
autocmd!
" Setup formatexpr specified filetype(s).
autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected')
" Update signature help on jump placeholder
autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
augroup end
" Remap for do codeAction of selected region, ex: `<leader>aap` for current paragraph
xmap <leader>a <Plug>(coc-codeaction-selected)
nmap <leader>a <Plug>(coc-codeaction-selected)
" Remap for do codeAction of current line
nmap <leader>ac <Plug>(coc-codeaction)
" Fix autofix problem of current line
nmap <leader>qf <Plug>(coc-fix-current)
" Create mappings for function text object, requires document symbols feature of languageserver.
xmap if <Plug>(coc-funcobj-i)
xmap af <Plug>(coc-funcobj-a)
omap if <Plug>(coc-funcobj-i)
omap af <Plug>(coc-funcobj-a)
" Use <C-d> for select selections ranges, needs server support, like: coc-tsserver, coc-python
nmap <silent> <C-d> <Plug>(coc-range-select)
xmap <silent> <C-d> <Plug>(coc-range-select)
" Use `:Format` to format current buffer
command! -nargs=0 Format :call CocAction('format')
" Use `:Fold` to fold current buffer
command! -nargs=? Fold :call CocAction('fold', <f-args>)
" use `:OR` for organize import of current buffer
command! -nargs=0 OR :call CocAction('runCommand', 'editor.action.organizeImport')
" Add status line support, for integration with other plugin, checkout `:h coc-status`
set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
" Using CocList
" Show all diagnostics
nnoremap <silent> <space>a :<C-u>CocList diagnostics<cr>
" Manage extensions
nnoremap <silent> <space>e :<C-u>CocList extensions<cr>
" Show commands
nnoremap <silent> <space>c :<C-u>CocList commands<cr>
" Find symbol of current document
nnoremap <silent> <space>o :<C-u>CocList outline<cr>
" Search workspace symbols
nnoremap <silent> <space>s :<C-u>CocList -I symbols<cr>
" Do default action for next item.
nnoremap <silent> <space>j :<C-u>CocNext<CR>
" Do default action for previous item.
nnoremap <silent> <space>k :<C-u>CocPrev<CR>
" Resume latest coc list
nnoremap <silent> <space>p :<C-u>CocListResume<CR>i
set laststatus=2
let g:airline#extensions#tabline#enabled = 1
let g:airline_powerline_fonts = 1
let g:airline_statusline_ontop=0
let g:airline_theme='base16_twilight'
let g:airline#extensions#tabline#formatter = 'default'
nnoremap <M-Right> :bn<cr>
nnoremap <M-Left> :bp<cr>
nnoremap <c-x> :bp \|bd #<cr>
let g:ale_completion_enabled = 0
let g:ale_linters = {'python': ['flake8', 'pylint'], 'javascript': ['eslint']}
let g:ale_fixers = {
\ 'javascript': ['prettier'],
\ 'css': ['prettier'],
\}
" Clang
let g:clang_format#style_options = {
\ "AccessModifierOffset" : -4,
\ "AllowShortIfStatementsOnASingleLine" : "true",
\ "AlwaysBreakTemplateDeclarations" : "true",
\ "Standard" : "C++11"}
" map to <Leader>cf in C++ code
autocmd FileType c,cpp,objc nnoremap <buffer><Leader>cf :<C-u>ClangFormat<CR>
autocmd FileType c,cpp,objc vnoremap <buffer><Leader>cf :ClangFormat<CR>
" if you install vim-operator-user
autocmd FileType c,cpp,objc map <buffer><Leader>x <Plug>(operator-clang-format)
" Toggle auto formatting:
nmap <Leader>C :ClangFormatAutoToggle<CR>
autocmd FileType c,cpp ClangFormatAutoEnable
"
let g:sql_type_default = 'mysql'
let g:loaded_vimballPlugin = 1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment