- Set ESXi package acceptance level to community:
esxcli software acceptance set --level=CommunitySupported
- Install the VIB:
cd /tmp
wget https://blog.rylander.io/2017/01/15/connect-a-esxi-6.5-host-to-a-ups-connected-to-a-synology-nas/NutClient-ESXi500-1.4.0.tar.gz
tar -xvzf NutClient-ESXi500-1.4.0.tar.gz
# NOTE: Modify the upsmon-install.sh file to adjust the default options (optional)
chmod +x upsmon-install.sh
./upsmon-install.sh
-
In the ESXi web UI, set the
upsmon
service policy to start and stop with host -
Reboot
If you run into further issues, remove the VIB and try again:
# NOTE: Be sure to set the acceptance level to community!
esxcli software vib remove --vibname=upsmon
Original source can be found here.
How do we know it's installed and see my UPS?