All control characteristics are under Service 00001523-1212-EFDE-1523-785FEABCD124
Mode = 00001524-1212-EFDE-1523-785FEABCD124
(READ, WRITE, NOTIFY)
Identify = 00008421-1212-EFDE-1523-785FEABCD124
(WRITE)
Power State = 00001525-1212-EFDE-1523-785FEABCD124
(WRITE, newer firmware also had READ and NOTIFY)
Write 0x01
through 0x0F
(1-16) to this characteristic to change the channel
Write 0x01
to this characteristic to flash the LED on the basestation
Write 0x01
Disables lasers, but keeps power to motor - only on newer firmware where this characteristic has READ/NOTIFY flags support this
Write 0x02
Disables lasers and motor
Write 0x01
then 0x00
as a separate write command (don't ask me why, just following the logs)
0x00
= Sleeping
0x02
= Standby
0x09
= Awake, and last state was sleeping
0x0B
Awake, and last state was standby
0x01
= Sometimes occurs when awake, not sure why as of yet