Created
May 17, 2024 14:34
-
-
Save Anime4000/94613ee7f712c2e59bf1586f9edf92e3 to your computer and use it in GitHub Desktop.
D-Link DPN-FX3060V B1 UART Dump
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.05.16 21:27:47 =~=~=~=~=~=~=~=~=~=~=~= | |
NOTICE: Booting Trusted Firmware - Realtek Semiconductor Corp. | |
NOTICE: BL1: v1.5(release):TAURUS_TAPEOUT_2_0 | |
NOTICE: BL1: Built : 17:13:20, Oct 27 2021 | |
NOTICE: BL1: CPU Speed 1000 MHz | |
NOTICE: GLOBAL_STRAP 0xc0a | |
NOTICE: boot from serial NAND flash | |
NOTICE: SPI_NAND: W25N02KV 0xefaa22 | |
NOTICE: SPI_NAND: Page 0x800, Block 0x20000, Chip 256MB | |
NOTICE: Platform initialized | |
NOTICE: ROTPK undeployed | |
NOTICE: BL1: Booting BL2 | |
NOTICE: BL2: RTL9607DQ CPU Speed 1000 MHz | |
NOTICE: boot from serial NAND flash | |
NOTICE: BL2: SPI_NAND: W25N02KVZEIE 0xefaa22 | |
NOTICE: BL2: SPI_NAND: Page 0x800, Block 0x20000, Chip 256MB | |
##### DRAM driver version(TAURUS): V0.6.8 ##### | |
INFO: package = BGA 15x15 | |
INFO: dram_type = 3 | |
INFO: dram_freq = 933 | |
INFO: dram_dq = 16 | |
INFO: PLL: DRAM freq.=933 | |
INFO: RZQ: RZQ_480CODE=0x11 | |
INFO: ZQ: CK , OCD=0x128, ODT=0x028 PAD_ZCTRL_RESULT=0x170e2b1b | |
INFO: ZQ: CA , OCD=0x11e, ODT=0x010 PAD_ZCTRL_RESULT=0x0a062618 | |
INFO: ZQ: DQ , OCD=0x030, ODT=0x014 PAD_ZCTRL_RESULT=0x0b071a10 | |
INFO: ZQ: DQS , OCD=0x114, ODT=0x014 PAD_ZCTRL_RESULT=0x0c072014 | |
INFO: ZQ: DQS_H, OCD=0x11e, ODT=0x010 PAD_ZCTRL_RESULT=0x0a062618 | |
INFO: ZQ: DQS_L, OCD=0x020, ODT=0x008 PAD_ZCTRL_RESULT=0x0503120b | |
INFO: DRAM refresh time is 7800 ns | |
INFO: ===Write leveling=== | |
INFO: (TX) Write leveling CK PI right move 2 taps | |
INFO: (TX) DQS_0 PI right moves 1 | |
INFO: (TX) DQS_1 PI right moves 2 | |
INFO: ===DQS_0 gating training=== | |
INFO: TM_DQS_EN = 3 | |
INFO: ===DQS_1 gating training=== | |
INFO: TM_DQS_EN = 3 | |
INFO: ===RX DQS delay scan=== | |
INFO: (RX) DQ delay 00 rising : 05 ~ 30, set 17 taps | |
INFO: (RX) DQ delay 01 rising : 04 ~ 27, set 15 taps | |
INFO: (RX) DQ delay 02 rising : 05 ~ 31, set 18 taps | |
INFO: (RX) DQ delay 03 rising : 02 ~ 28, set 15 taps | |
INFO: (RX) DQ delay 04 rising : 04 ~ 29, set 16 taps | |
INFO: (RX) DQ delay 05 rising : 03 ~ 29, set 16 taps | |
INFO: (RX) DQ delay 06 rising : 04 ~ 28, set 16 taps | |
INFO: (RX) DQ delay 07 rising : 04 ~ 30, set 17 taps | |
INFO: (RX) DQ delay 08 rising : 01 ~ 26, set 13 taps | |
INFO: (RX) DQ delay 09 rising : 01 ~ 27, set 14 taps | |
INFO: (RX) DQ delay 10 rising : 00 ~ 27, set 13 taps | |
INFO: (RX) DQ delay 11 rising : 02 ~ 26, set 14 taps | |
INFO: (RX) DQ delay 12 rising : 02 ~ 28, set 15 taps | |
INFO: (RX) DQ delay 13 rising : 03 ~ 28, set 15 taps | |
INFO: (RX) DQ delay 14 rising : 02 ~ 28, set 15 taps | |
INFO: (RX) DQ delay 15 rising : 04 ~ 29, set 16 taps | |
INFO: (RX) DQ delay 00 falling: 07 ~ 29, set 18 taps | |
INFO: (RX) DQ delay 01 falling: 04 ~ 26, set 15 taps | |
INFO: (RX) DQ delay 02 falling: 07 ~ 29, set 18 taps | |
INFO: (RX) DQ delay 03 falling: 05 ~ 26, set 15 taps | |
INFO: (RX) DQ delay 04 falling: 07 ~ 26, set 16 taps | |
INFO: (RX) DQ delay 05 falling: 05 ~ 28, set 16 taps | |
INFO: (RX) DQ delay 06 falling: 06 ~ 27, set 16 taps | |
INFO: (RX) DQ delay 07 falling: 06 ~ 26, set 16 taps | |
INFO: (RX) DQ delay 08 falling: 05 ~ 24, set 14 taps | |
INFO: (RX) DQ delay 09 falling: 03 ~ 25, set 14 taps | |
INFO: (RX) DQ delay 10 falling: 05 ~ 24, set 14 taps | |
INFO: (RX) DQ delay 11 falling: 02 ~ 26, set 14 taps | |
INFO: (RX) DQ delay 12 falling: 05 ~ 25, set 15 taps | |
INFO: (RX) DQ delay 13 falling: 04 ~ 28, set 16 taps | |
INFO: (RX) DQ delay 14 falling: 02 ~ 26, set 14 taps | |
INFO: (RX) DQ delay 15 falling: 06 ~ 28, set 17 taps | |
INFO: ===tm_rd_fifo training=== | |
INFO: tm_rd_fifo = 4 (default=6) | |
INFO: (TX) DQ0 PI scan window from 4 to 15 taps, midpoint(-1) is 8 taps(default=9) | |
INFO: (TX) DQ1 PI scan window from 4 to 14 taps, midpoint(-1) is 8 taps(default=10) | |
INFO: (TX) DQ delay 00 max: 14, set 1 taps | |
INFO: (TX) DQ delay 01 max: 15, set 2 taps | |
INFO: (TX) DQ delay 02 max: 15, set 2 taps | |
INFO: (TX) DQ delay 03 max: 15, set 2 taps | |
INFO: (TX) DQ delay 04 max: 15, set 2 taps | |
INFO: (TX) DQ delay 05 max: 15, set 2 taps | |
INFO: (TX) DQ delay 06 max: 15, set 2 taps | |
INFO: (TX) DQ delay 07 max: 15, set 2 taps | |
INFO: (TX) DQ delay 08 max: 15, set 2 taps | |
INFO: (TX) DQ delay 09 max: 15, set 2 taps | |
INFO: (TX) DQ delay 10 max: 15, set 2 taps | |
INFO: (TX) DQ delay 11 max: 15, set 2 taps | |
INFO: (TX) DQ delay 12 max: 15, set 2 taps | |
INFO: (TX) DQ delay 13 max: 14, set 1 taps | |
INFO: (TX) DQ delay 14 max: 15, set 2 taps | |
INFO: (TX) DQ delay 15 max: 13, set 0 taps | |
INFO: DRAM size = 4Gb | |
INFO: BSTC test PASS | |
INFO: Done DDR initialization...DRAM test PASS...Address toggle PASS | |
NOTICE: BL2: v1.5(release):gd1749d05a | |
NOTICE: BL2: Built : 14:51:16, Nov 30 2022 | |
NOTICE: ROTPK undeployed | |
NOTICE: AES Key undeployed | |
NOTICE: BL1: Booting BL31 | |
NOTICE: BL31: v1.5(release):gd1749d05a | |
NOTICE: BL31: Built : 14:51:16, Nov 30 2022 | |
WARNING: Using deprecated integer interrupt arrays in gicv3_driver_data_t | |
WARNING: Please migrate to using interrupt_prop_t arrays | |
U-Boot 2020.01-00006-g383a9b08a5 (Jan 14 2024 - 18:23:09 +0800)Taurus-SoC | |
CortexA55: 1000 MHz | |
DRAM: DDR3-1866: 16-bit mode, 512 MiB | |
NAND: | |
SPI NAND: W25N02KVZEIE (0xefaa22) | |
spare: 0x80 (128B) | |
page: 0x800 (2KB) | |
block: 0x20000 (128KB) | |
chip: 0x10000000(256MB) | |
available: 0x10000000(256MB) | |
mode: S/S | |
clock: 100 MHz | |
BBL: Bbl0 from flash | |
Hidden: | |
NAND: 256 MiB | |
Loading Environment from NAND... OK | |
In: serial | |
Out: serial | |
Err: serial | |
Hit any key to stop autoboot: 1 0 | |
ca77xx_eth_initialize: auto_scan_active_port=1 | |
ca77xx_ni_auto_scan_active_port: auto scan active_port timeout, set active_port to 1. | |
Taurus-SoC | |
PHY ID 0x001CCAC4 10Mbps full duplex | |
multicast_start Using Taurus-SoC device, mcastUpgradeTimeoutMSecs(10) | |
mcast upgrade timeout.(1 0 0 0 0) | |
ubi0: attaching mtd5 | |
SPI-NAND INFO : internal ECC corrected 1 bits, status=0x10, pageid=37824 | |
SPI-NAND INFO : internal ECC corrected 1 bits, status=0x10, pageid=48384 | |
ubi0: scanning is finished | |
ubi0: attached mtd5 (name "ubi_device", size 245 MiB) | |
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
ubi0: good PEBs: 1966, bad PEBs: 0, corrupted PEBs: 0 | |
ubi0: user volume: 10, internal volumes: 1, max. volumes count: 128 | |
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1066206694 | |
ubi0: available PEBs: 788, total reserved PEBs: 1178, PEBs reserved for bad PEB handling: 40 | |
Read 6291456 bytes from volume ubi_k0 to 0000000005000000 | |
## Checking Image at 05000000 ... | |
FIT image found | |
FIT description: U-boot FitImage for RTK arm64 kernel | |
Image 0 (kernel) | |
Description: Linux Kernel | |
Type: Kernel Image | |
Compression: lzma compressed | |
Data Start: 0x050000f4 | |
Data Size: 3745878 Bytes = 3.6 MiB | |
Architecture: AArch64 | |
OS: Linux | |
Load Address: 0x00000000 | |
Entry Point: 0x00000000 | |
Image 1 (fdt-1) | |
Description: Flattened Device Tree blob | |
Type: Flat Device Tree | |
Compression: uncompressed | |
Data Start: 0x05392a00 | |
Data Size: 28457 Bytes = 27.8 KiB | |
Architecture: AArch64 | |
Load Address: 0x01000000 | |
Default Configuration: 'conf-1' | |
Configuration 0 (conf-1) | |
Description: Boot Linux kernel with FDT blob | |
Kernel: kernel | |
FDT: fdt-1 | |
## Checking hash(es) for FIT Image at 05000000 ... | |
Hash(es) for Image 0 (kernel): | |
Hash(es) for Image 1 (fdt-1): | |
## Loading kernel from FIT Image at 05000000 ... | |
Using 'conf-1' configuration | |
Trying 'kernel' kernel subimage | |
Description: Linux Kernel | |
Type: Kernel Image | |
Compression: lzma compressed | |
Data Start: 0x050000f4 | |
Data Size: 3745878 Bytes = 3.6 MiB | |
Architecture: AArch64 | |
OS: Linux | |
Load Address: 0x00000000 | |
Entry Point: 0x00000000 | |
Verifying Hash Integrity ... OK | |
## Loading fdt from FIT Image at 05000000 ... | |
Using 'conf-1' configuration | |
Trying 'fdt-1' fdt subimage | |
Description: Flattened Device Tree blob | |
Type: Flat Device Tree | |
Compression: uncompressed | |
Data Start: 0x05392a00 | |
Data Size: 28457 Bytes = 27.8 KiB | |
Architecture: AArch64 | |
Load Address: 0x01000000 | |
Verifying Hash Integrity ... OK | |
Loading fdt from 0x05392a00 to 0x01000000 | |
Booting using the fdt blob at 0x1000000 | |
Uncompressing Kernel Image | |
ERROR: reserving fdt memory region failed (addr=0 size=1000) | |
Loading Device Tree to 000000001e5dd000, end 000000001e5e6f28 ... OK | |
Starting kernel ... | |
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
[ 0.000000] Linux version 5.10.70 (knightness_peng@38dot139) (aarch64-linux-gcc (Realtek ASDK64-10.2.0 Build 3544) 10.2.0, GNU ld (Realtek ASDK64-10.2.0 Build 3544) 2.35.1.20201230) #11 SMP Sun Jan 14 18:25:02 CST 2024 | |
[ 0.000000] Machine model: Realtek Taurus ENG Board | |
[ 0.000000] earlycon: serial0 at MMIO 0x00000000f43291b0 (options '') | |
[ 0.000000] printk: bootconsole [serial0] enabled | |
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'voip_vector_buffer@0x0': base 0x0000000000000000, size 0 MiB | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] | |
[ 0.000000] node 0: [mem 0x0000000002000000-0x00000000023fffff] | |
[ 0.000000] node 0: [mem 0x0000000002400000-0x000000000eefffff] | |
[ 0.000000] node 0: [mem 0x000000000ef00000-0x000000000effffff] | |
[ 0.000000] node 0: [mem 0x000000000f000000-0x000000000ffdefff] | |
[ 0.000000] node 0: [mem 0x000000000ffdf000-0x000000000ffdffff] | |
[ 0.000000] node 0: [mem 0x000000000ffe0000-0x000000001fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.1 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] psci: SMC Calling Convention v1.1 | |
[ 0.000000] percpu: Embedded 21 pages/cpu s47064 r8192 d30760 u86016 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: detected: GIC system register CPU interface | |
[ 0.000000] CPU features: detected: Virtualization Host Extensions | |
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
[ 0.000000] alternatives: patching kernel code | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 | |
[ 0.000000] Kernel command line: earlycon=serial,0xf43291b0 console=ttyS0,115200 ubi.mtd=4 root=31:8 rootfstype=squashfs swiotlb=noforce mtdparts=ca_spinand_flash:2048K(boot),256K@0x280000(env),256K@0x2C0000(env2),256K@0x300000(static_conf),251648K@0x340000(ubi_device) | |
[ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes | |
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 393216 bytes | |
[ 0.000000] printk: log_buf_len min size: 131072 bytes | |
[ 0.000000] printk: log_buf_len: 524288 bytes | |
[ 0.000000] printk: early log buf free: 128336(97%) | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 457596K/524288K available (7614K kernel code, 1024K rwdata, 2396K rodata, 1536K init, 453K bss, 66692K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
[ 0.000000] GICv3: 128 SPIs implemented | |
[ 0.000000] GICv3: 0 Extended SPIs implemented | |
[ 0.000000] GICv3: Distributor has no Range Selector support | |
[ 0.000000] GICv3: 16 PPIs implemented | |
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000004f8040000 | |
[ 0.000000] ni_ptp_ictl@0xf430439c: unable to get resource | |
[ 0.000000] random: get_random_bytes called from start_kernel+0x298/0x3f4 with crng_init=0 | |
[ 0.000000] RTK SOC: soc_clks_setup finished. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns | |
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns | |
[ 0.008271] Console: colour dummy device 80x25 | |
[ 0.012561] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) | |
[ 0.022896] pid_max: default: 32768 minimum: 301 | |
[ 0.027612] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) | |
[ 0.034810] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) | |
[ 0.044118] rcu: Hierarchical SRCU implementation. | |
[ 0.049793] smp: Bringing up secondary CPUs ... | |
[ 0.054655] Detected VIPT I-cache on CPU1 | |
[ 0.054695] GICv3: CPU1: found redistributor 100 region 0:0x00000004f8060000 | |
[ 0.054746] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] | |
[ 0.055281] Detected VIPT I-cache on CPU2 | |
[ 0.055310] GICv3: CPU2: found redistributor 200 region 0:0x00000004f8080000 | |
[ 0.055340] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] | |
[ 0.055840] Detected VIPT I-cache on CPU3 | |
[ 0.055866] GICv3: CPU3: found redistributor 300 region 0:0x00000004f80a0000 | |
[ 0.055895] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] | |
[ 0.055990] smp: Brought up 1 node, 4 CPUs | |
[ 0.112573] SMP: Total of 4 processors activated. | |
[ 0.117272] CPU features: detected: Privileged Access Never | |
[ 0.122839] CPU features: detected: User Access Override | |
[ 0.128129] CPU features: detected: 32-bit EL0 Support | |
[ 0.133262] CPU features: detected: Common not Private translations | |
[ 0.139507] CPU features: detected: RAS Extension Support | |
[ 0.144899] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
[ 0.153499] CPU features: detected: CRC32 instructions | |
[ 0.158635] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
[ 0.165648] CPU: All CPU(s) started at EL2 | |
[ 0.170654] devtmpfs: initialized | |
[ 0.179834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.189525] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 0.196558] pinctrl core: initialized pinctrl subsystem | |
[ 0.202180] NET: Registered protocol family 16 | |
[ 0.207157] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.214750] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.215282] cpuidle: using governor ladder | |
[ 0.225247] cpuidle: using governor menu | |
[ 0.229274] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.236037] ASID allocator initialised with 65536 entries | |
[ 0.241301] SOC_VENUS: RTK_SOC_CHIP_ID = 0x6706 | |
[ 0.245817] rtk_soc.smc_buf_phy=0xffdf000, rtk_soc.smc_buf_len=0x1000, mapped at 0xffffffc010d11000 | |
[ 0.255175] | |
[ 0.255175] ### rtk_ramoops_data.mem_address=13c0000 ### | |
[ 0.261938] pstore: Registered ramoops as persistent store backend | |
[ 0.267997] ramoops: using 0x1ff8@0x13c0000, ecc: 0 | |
[ 0.284529] reg-rtk_spare f432945c.spare: resource - [mem 0xf432945c-0xf432945f flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.310275] [1;31mRTK GLOBAL_GLOBAL_CONFIG: Power down offload1 cpu clock(PE1).[0m | |
[ 0.317910] [1;31mRTK GLOBAL_GLOBAL_CONFIG: Power down PCIE2 clock.[0m | |
[ 0.324613] iommu: Default domain type: Translated | |
[ 0.329722] SCSI subsystem initialized | |
[ 0.333640] usbcore: registered new interface driver usbfs | |
[ 0.339030] usbcore: registered new interface driver hub | |
[ 0.344339] usbcore: registered new device driver usb | |
[ 0.350764] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.366856] NET: Registered protocol family 2 | |
[ 0.371302] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.379036] ==== set SPEEDTEST CA TIMER2 ===== | |
[ 0.383688] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 0.391932] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
[ 0.399624] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
[ 0.406778] TCP: Hash tables configured (established 4096 bind 4096) | |
[ 0.413166] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | |
[ 0.419571] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | |
[ 0.426674] NET: Registered protocol family 1 | |
[ 0.430910] PCI: CLS 0 bytes, default 64 | |
[ 0.436616] Initialise system trusted keyrings | |
[ 0.441063] workingset: timestamp_bits=46 max_order=17 bucket_order=0 | |
[ 0.450551] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.456349] ntfs: driver 2.1.32 [Flags: R/W]. | |
[ 0.460769] fuse: init (API version 7.32) | |
[ 0.506507] Key type asymmetric registered | |
[ 0.510442] Asymmetric key parser 'x509' registered | |
[ 0.515334] io scheduler mq-deadline registered | |
[ 0.519823] io scheduler kyber registered | |
[ 0.523952] atomic64_test: passed | |
[ 0.527390] rtk-taurus-phy f43200c4.phy: resource - [mem 0xf43200c4-0xf43200e3 flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.538127] rtk-taurus-phy f43200c4.phy: resource - [mem 0xf432036c-0xf432036f flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.550180] pinctrl-cortina f43200f0.pinctrl: pinctrl driver registration: ARCH_OFFSET=8 | |
[ 0.559008] ca77xx-gpio f43292c0.gpio-controller: resource - [mem 0xf43292c0-0xf4329373 flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.570518] ca77xx-gpio f43292c0.gpio-controller: id 0 | |
[ 0.576289] ca77xx-gpio f43292c0.gpio-controller: Setting up IRQs for GPIO bank 0 | |
[ 0.584224] ca77xx-gpio f43292c0.gpio-controller: Setting up IRQs for GPIO bank 1 | |
[ 0.592147] ca77xx-gpio f43292c0.gpio-controller: Setting up IRQs for GPIO bank 2 | |
[ 0.600030] ca77xx-gpio f43292c0.gpio-controller: Setting up IRQs for GPIO bank 3 | |
[ 0.607931] ca77xx-gpio f43292c0.gpio-controller: Setting up IRQs for GPIO bank 4 | |
[ 0.615942] Realtek GPIO Driver for Flash Reload Default | |
[ 0.621264] ----[ rtk gpio ]-------------------------------- | |
[ 0.627466] ca_soc f4320000.soc: Vendor ID: 0x8f3 | |
[ 0.632041] ca_soc f4320000.soc: Chip ID: 0x6706 | |
[ 0.636608] ca_soc f4320000.soc: Chip Rev: 66 | |
[ 0.640970] ca_soc f4320000.soc: Chip Mode: 0x41 | |
[ 0.645552] ca_soc f4320000.soc: CPLL: 1000.00 MHZ | |
[ 0.650323] ca_soc f4320000.soc: EPLL: 2000.00 MHZ | |
[ 0.655111] ca_soc f4320000.soc: FPLL: 1599.99 MHZ | |
[ 0.659872] ca_soc f4320000.soc: CPU Clock: 1000.00 MHZ | |
[ 0.665093] ca_soc f4320000.soc: Core Clock: 333.33 MHZ | |
[ 0.670292] ca_soc f4320000.soc: LSAXI Clock: 200.00 MHZ | |
[ 0.675595] ca_soc f4320000.soc: HSAXI Clock: 400.00 MHZ | |
[ 0.680887] ca_soc f4320000.soc: CCI Clock: 400.00 MHZ | |
[ 0.685997] ca_soc f4320000.soc: PE Clock: 799.99 MHZ | |
[ 0.691043] ca_soc f4320000.soc: PE AXI Clock: 399.99 MHZ | |
[ 0.696894] ca_pmx_request_gpio: offset:65 reg_off:1c bit_off:5 | |
[ 0.702769] ca_pmx_request_gpio: offset:66 reg_off:1c bit_off:6 | |
[ 0.708753] ca77xx-reset f4320098.reset-controller: resource - [mem 0xf4320098-0xf432009b flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.720529] ca77xx-reset f4320094.reset-controller: resource - [mem 0xf4320094-0xf4320097 flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.732316] ca77xx-reset f43200a0.reset-controller: resource - [mem 0xf43200a0-0xf43200a3 flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.804611] f43291b0.uart: ttyS0 at I/O 0x0 (irq = 21, base_baud = 7812500) is a Cortina UART0 | |
[ 0.813122] printk: console [ttyS0] enabled | |
[ 0.813122] printk: console [ttyS0] enabled | |
[ 0.821411] printk: bootconsole [serial0] disabled | |
[ 0.821411] printk: bootconsole [serial0] disabled | |
[ 0.831502] f43291e0.uart: ttyS1 at I/O 0x0 (irq = 22, base_baud = 7812500) is a Cortina UART1 | |
[ 0.840411] aipc: register chrdev(252,0) | |
[ 0.844378] aipc: create device successed | |
[ 0.848402] aipc: create dsp console device successed | |
[ 0.853305] aipc: init done | |
[ 0.856286] aipc_module_mem_init: mem_resource for voip ipc=[mem 0xf4329000-0xf432901f] | |
[ 0.864159] aipc_module_mem_init: ca_voip_ipc_per_int_base=(____ptrval____) | |
[ 0.871097] aipc_module_mem_init: mem_resource for voip dsp boot ins=[mem 0x80000000-0x8000000f] | |
[ 0.879856] aipc_module_mem_init: ca_voip_dsp_boot_ins_base=(____ptrval____) | |
[ 0.886911] aipc_module_mem_init: ca_voip_ipc_phy_base=0x02300000 | |
[ 0.893004] aipc_module_mem_init: ca_voip_ipc_mem_base=0x(____ptrval____) | |
[ 0.899757] aipc: start aipc irq init | |
[ 0.903424] aipc_cpu_irq_ca_init: irq = 58 | |
[ 0.907520] aipc: Request IRQ for IPC OK | |
[ 0.913091] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
[ 0.919494] mtdoops: mtd device (mtddev=name/number) must be supplied | |
[ 0.926073] ca-qspi 4f4324000.sf-ctrl: ca-qspi resource - [mem 0x4f4324000-0x4f432404f flags 0x200] mapped at 0x(____ptrval____) | |
[ 0.938142] spi-nand spi0.0: model_name: W25N02KVZEIE | |
[ 0.943049] spi-nand spi0.0: Winbond SPI NAND was found. | |
[ 0.948333] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 | |
[ 0.957333] spi nand total capacity is 256MB(0x10000000) | |
[ 0.962488] spi nand available size is 256MB(0x10000000) | |
[ 0.967776] spi nand Bbl0 from flash | |
[ 0.971347] spi nand hidden: | |
[ 0.971350] | |
[ 0.975770] spi nand Mode: S/S | |
[ 0.978833] 5 cmdlinepart partitions found on MTD device ca_spinand_flash | |
[ 0.985608] Creating 5 MTD partitions on "ca_spinand_flash": | |
[ 0.991249] 0x000000000000-0x000000200000 : "boot" | |
[ 0.998422] 0x000000280000-0x0000002c0000 : "env" | |
[ 1.004457] 0x0000002c0000-0x000000300000 : "env2" | |
[ 1.010514] 0x000000300000-0x000000340000 : "static_conf" | |
[ 1.017275] 0x000000340000-0x00000f900000 : "ubi_device" | |
[ 1.144390] ca-qspi 4f4324000.sf-ctrl: spi-flash controller probed, while mode_bits=0x0000 | |
[ 1.152846] spi-ca77xx f43290d8.spi: resource - [mem 0xf43290d8-0xf4329117 flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.163288] spi-ca77xx f43290d8.spi: irq 53 | |
[ 1.169302] libphy: Fixed MDIO Bus: probed | |
[ 1.173270] Init RTK Driver Module.... | |
[ 1.173283] OK | |
[ 1.178625] Init RTK Core Dev Module.... | |
[ 1.178636] OK | |
[ 1.184186] | |
[ 1.184186] rtdrv_init !!!! for netfilter | |
[ 1.189749] [rtdrv_init]: rtdrv_ext_igmpHook_sockopts init. | |
[ 1.195316] [rtdrv_init]: rtdrv_ext_igmpHook_sockopts success. | |
[ 1.201191] pkt_redirect_init complete | |
[ 1.204870] interrupt broadcaster init ok! | |
[ 1.208948] [FCEXT] rtk_fc_extmodule_init | |
[ 1.213050] [nic_hook_init-213] | |
[ 1.216158] PPP generic driver version 2.4.2 | |
[ 1.220640] NET: Registered protocol family 24 | |
[ 1.224964] PPTP driver version 0.8.5 | |
[ 1.229049] taurus-usb2phy f432b020.usbphy: usb2_phy resource - [mem 0xf432b020-0xf432b037 flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.240861] taurus-usb2phy f432b020.usbphy: USB2-port0 VBUS GPIO Resource Get O.K and u2port0_vbus:0 | |
[ 1.249930] taurus-usb2phy f432b020.usbphy: Chip revision is B | |
[ 1.311067] taurus-usb3phy f432b000.usbphy: usb3_phy resource - [mem 0xf432b000-0xf432b01f flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.322865] taurus-usb3phy f432b000.usbphy: usb3_phy resource - [mem 0xf432b04c-0xf432b05b flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.334784] ca_pmx_request_gpio: offset:64 reg_off:1c bit_off:4 | |
[ 1.340641] taurus-usb3phy f432b000.usbphy: USB3-port VBUS GPIO Resource Get O.K and vbus:0 | |
[ 1.348984] taurus-usb3phy f432b000.usbphy: Chip revision is B | |
[ 1.354959] taurus-usb3phy f432b000.usbphy: Enabled S2 u3port resource - [mem 0xf4337000-0xf4337fff flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.392574] taurus-usb3phy f432b000.usbphy: USB3 PHY version: revB v1.0 (2022.02.24) | |
[ 1.400281] taurus-usb3phy f432b000.usbphy: Invoke U2 PHY init | |
[ 1.406014] taurus-usb2phy f432b020.usbphy: USB2 PHY version: revB v1.1 (2022.04.20) | |
[ 1.520780] xhci-hcd f0200000.usb3-xhci: xHCI Host Controller | |
[ 1.526571] xhci-hcd f0200000.usb3-xhci: new USB bus registered, assigned bus number 1 | |
[ 1.534583] xhci-hcd f0200000.usb3-xhci: hcc params 0x0228fe65 hci version 0x110 quirks 0x0000000000010010 | |
[ 1.544136] xhci-hcd f0200000.usb3-xhci: irq 55, io mem 0xf0200000 | |
[ 1.550394] xhci-hcd f0200000.usb3-xhci: xHCI Host Controller | |
[ 1.556163] xhci-hcd f0200000.usb3-xhci: new USB bus registered, assigned bus number 2 | |
[ 1.563950] xhci-hcd f0200000.usb3-xhci: Host supports USB 3.0 SuperSpeed | |
[ 1.571393] hub 1-0:1.0: USB hub found | |
[ 1.575014] hub 1-0:1.0: 2 ports detected | |
[ 1.579463] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 1.588022] hub 2-0:1.0: USB hub found | |
[ 1.591776] hub 2-0:1.0: 1 port detected | |
[ 1.596148] usbcore: registered new interface driver cdc_acm | |
[ 1.601674] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
[ 1.609705] usbcore: registered new interface driver usblp | |
[ 1.615446] usbcore: registered new interface driver uas | |
[ 1.620680] usbcore: registered new interface driver usb-storage | |
[ 1.626730] usbcore: registered new interface driver usbserial_generic | |
[ 1.633157] usbserial: USB Serial support registered for generic | |
[ 1.639148] usbcore: registered new interface driver ch341 | |
[ 1.644624] usbserial: USB Serial support registered for ch341-uart | |
[ 1.650882] usbcore: registered new interface driver cp210x | |
[ 1.656416] usbserial: USB Serial support registered for cp210x | |
[ 1.662367] usbcore: registered new interface driver cypress_m8 | |
[ 1.668233] usbserial: USB Serial support registered for DeLorme Earthmate USB | |
[ 1.675457] usbserial: USB Serial support registered for HID->COM RS232 Adapter | |
[ 1.682754] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter | |
[ 1.690053] usbcore: registered new interface driver ftdi_sio | |
[ 1.695788] usbserial: USB Serial support registered for FTDI USB Serial Device | |
[ 1.703149] usbcore: registered new interface driver option | |
[ 1.708633] usbserial: USB Serial support registered for GSM modem (1-port) | |
[ 1.715689] usbcore: registered new interface driver pl2303 | |
[ 1.721166] usbserial: USB Serial support registered for pl2303 | |
[ 1.727032] i2c /dev entries driver | |
[ 1.730799] ca_set_mux: group:44 reg_off:18 bit_off:4 | |
[ 1.735687] ca_set_mux: group:45 reg_off:18 bit_off:5 | |
[ 1.740726] ca_set_mux: group:d4 reg_off:4 bit_off:14 | |
[ 1.745859] ca77xx-i2c f4329160.i2c: resource - [mem 0xf4329160-0xf4329187 flags 0x200] mapped at 0x(____ptrval____) | |
[ 1.756340] ca77xx-i2c f4329160.i2c: irq 51 | |
[ 2.111314] cortina_thermal f4320264.thermal: SoC Temperature= 35 | |
[ 2.119478] ca_pmx_request_gpio: offset:2 reg_off:10 bit_off:2 | |
[ 2.125343] ca_pmx_request_gpio: offset:a reg_off:10 bit_off:a | |
[ 2.131178] ca_pmx_request_gpio: offset:8e reg_off:20 bit_off:e | |
[ 2.137063] ca_pmx_request_gpio: offset:9 reg_off:10 bit_off:9 | |
[ 2.142904] ca_pmx_request_gpio: offset:b reg_off:10 bit_off:b | |
[ 2.148712] ca_pmx_request_gpio: offset:7 reg_off:10 bit_off:7 | |
[ 2.154586] ca_pmx_request_gpio: offset:4 reg_off:10 bit_off:4 | |
[ 2.160369] ca_pmx_request_gpio: offset:3 reg_off:10 bit_off:3 | |
[ 2.166208] ca_pmx_request_gpio: offset:1 reg_off:10 bit_off:1 | |
[ 2.172049] ca_pmx_request_gpio: offset:0 reg_off:10 bit_off:0 | |
[ 2.177828] ca_pmx_request_gpio: offset:6 reg_off:10 bit_off:6 | |
[ 2.183683] ca_pmx_request_gpio: offset:5 reg_off:10 bit_off:5 | |
[ 2.191023] u32 classifier | |
[ 2.193568] input device check on | |
[ 2.197684] xt_time: kernel timezone is -0000 | |
[ 2.202038] gre: GRE over IPv4 demultiplexor driver | |
[ 2.207485] NET: Registered protocol family 10 | |
[ 2.212584] Segment Routing with IPv6 | |
[ 2.216346] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 2.223371] NET: Registered protocol family 17 | |
[ 2.227727] Bridge firewalling registered | |
[ 2.231794] l2tp_core: L2TP core driver, V2.0 | |
[ 2.235991] l2tp_ppp: PPPoL2TP kernel driver, V2.0 | |
[ 2.240780] 8021q: 802.1Q VLAN Support v1.8 | |
[ 2.244947] TAPI, Version 4.17.0.7, (c) 2001-2016 Lantiq Beteiligungs-GmbH & Co.KG | |
[ 2.252794] DUSLIC XS device driver, version 1.3.1.0, (c) 2014-2016 Lantiq Beteiligungs-GmbH & Co.KG | |
[ 2.261822] ssp_pinctrl_init | |
[ 2.264948] ca_set_mux: group:46 reg_off:18 bit_off:6 | |
[ 2.269830] ca_set_mux: group:47 reg_off:18 bit_off:7 | |
[ 2.274886] ca_set_mux: group:48 reg_off:18 bit_off:8 | |
[ 2.279898] ca_set_mux: group:49 reg_off:18 bit_off:9 | |
[ 2.284948] ca_set_mux: group:4a reg_off:18 bit_off:a | |
[ 2.289967] ca_set_mux: group:4b reg_off:18 bit_off:b | |
[ 2.295014] ca_set_mux: group:c4 reg_off:4 bit_off:4 | |
[ 2.300257] spi_linux_wrapper_init() | |
[ 2.303844] ca_set_mux: group:40 reg_off:18 bit_off:0 | |
[ 2.308726] ca_set_mux: group:41 reg_off:18 bit_off:1 | |
[ 2.313783] ca_set_mux: group:42 reg_off:18 bit_off:2 | |
[ 2.318795] ca_set_mux: group:43 reg_off:18 bit_off:3 | |
[ 2.323841] ca_set_mux: group:c6 reg_off:4 bit_off:6 | |
[ 2.328819] SLIC module being probed | |
[ 2.332357] slic_spi_probe: slic_spi[ 0 ] = (____ptrval____) | |
[ 2.338298] spi_linux_wrapper_init(254): completed | |
[ 2.338707] Loading compiled-in X.509 certificates | |
[ 2.349301] pstore: Using crash dump compression: deflate | |
[ 2.354872] cortina-pcie f4325000.pcie: Adding to iommu group 0 | |
[ 2.360700] cortina-pcie f4325000.pcie: resource - [mem 0xf4325000-0xf43253ff flags 0x200] mapped at 0xffffffc010f65000 | |
[ 2.371404] cortina-pcie f4325000.pcie: id 0 | |
[ 2.375639] cortina-pcie f4325000.pcie: num-lanes 1 | |
[ 2.380520] cortina-pcie f4325000.pcie: resource - [mem 0xf4333000-0xf4334fff flags 0x200] mapped at 0xffffffc012e02000 | |
[ 2.391278] cortina-pcie f4325000.pcie: Chip revision is B | |
[ 2.396963] cortina-pcie f4325000.pcie: irq-affinity cpu: 1, nr_cpu_ids(4) | |
[ 2.403784] cortina-pcie f4325000.pcie: resource - [mem 0xa0000000-0xa0000fff flags 0x200] mapped at 0xffffffc010f6d000 | |
[ 2.414472] cortina-pcie f4325000.pcie: outbound iATU enable | |
[ 2.420087] cortina-pcie f4325000.pcie: host bridge /pcie@f4325000 ranges: | |
[ 2.426967] cortina-pcie f4325000.pcie: IO 0x00a0003000..0x00a0012fff -> 0x0000000000 | |
[ 2.435286] cortina-pcie f4325000.pcie: MEM 0x00a0400000..0x00afffffff -> 0x00a0400000 | |
[ 2.448545] cortina-pcie f4325000.pcie: PCIe Serdes CFG version: revB v1.2 (2022.04.22) | |
[ 2.565574] cortina-pcie f4325000.pcie: No BER Notify! | |
[ 2.572584] cortina-pcie f4325000.pcie: Link up | |
[ 2.576946] cortina-pcie f4325000.pcie: Speed Gen2 Lanes x1 | |
[ 2.582675] cortina-pcie f4325000.pcie: PCI host bridge to bus 0000:00 | |
[ 2.589037] pci_bus 0000:00: root bus resource [bus 00-ff] | |
[ 2.594518] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] | |
[ 2.600664] pci_bus 0000:00: root bus resource [mem 0xa0400000-0xafffffff] | |
[ 2.607567] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 | |
[ 2.613547] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
[ 2.620242] pci 0000:00:00.0: supports D1 D2 | |
[ 2.624461] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
[ 2.632313] pci 0000:01:00.0: [10ec:c852] type 00 class 0x028000 | |
[ 2.638228] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] | |
[ 2.643816] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit] | |
[ 2.650981] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold | |
[ 2.672440] pci 0000:00:00.0: BAR 8: assigned [mem 0xa0400000-0xa04fffff] | |
[ 2.679063] pci 0000:00:00.0: BAR 6: assigned [mem 0xa0500000-0xa050ffff pref] | |
[ 2.686286] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] | |
[ 2.692360] pci 0000:01:00.0: BAR 2: assigned [mem 0xa0400000-0xa04fffff 64bit] | |
[ 2.699679] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] | |
[ 2.705733] pci 0000:00:00.0: PCI bridge to [bus 01-ff] | |
[ 2.710926] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] | |
[ 2.716993] pci 0000:00:00.0: bridge window [mem 0xa0400000-0xa04fffff] | |
[ 2.724235] cortina-pcie f4326000.pcie: Adding to iommu group 1 | |
[ 2.730064] cortina-pcie f4326000.pcie: resource - [mem 0xf4326000-0xf43263ff flags 0x200] mapped at 0xffffffc010f75000 | |
[ 2.740772] cortina-pcie f4326000.pcie: id 1 | |
[ 2.745006] cortina-pcie f4326000.pcie: num-lanes 1 | |
[ 2.749885] cortina-pcie f4326000.pcie: resource - [mem 0xf4335000-0xf4336fff flags 0x200] mapped at 0xffffffc0134d6000 | |
[ 2.760645] cortina-pcie f4326000.pcie: Chip revision is B | |
[ 2.766328] cortina-pcie f4326000.pcie: irq-affinity cpu: 1, nr_cpu_ids(4) | |
[ 2.773155] cortina-pcie f4326000.pcie: resource - [mem 0xb0000000-0xb0000fff flags 0x200] mapped at 0xffffffc010f7d000 | |
[ 2.783833] cortina-pcie f4326000.pcie: outbound iATU enable | |
[ 2.789451] cortina-pcie f4326000.pcie: host bridge /pcie@f4326000 ranges: | |
[ 2.796337] cortina-pcie f4326000.pcie: IO 0x00b0003000..0x00b0012fff -> 0x0000000000 | |
[ 2.804649] cortina-pcie f4326000.pcie: MEM 0x00b0400000..0x00bfffffff -> 0x00b0400000 | |
[ 2.817912] cortina-pcie f4326000.pcie: PCIe Serdes CFG version: revB v1.2 (2022.04.22) | |
[ 2.935241] cortina-pcie f4326000.pcie: No BER Notify! | |
[ 2.942249] cortina-pcie f4326000.pcie: Link up | |
[ 2.946612] cortina-pcie f4326000.pcie: Speed Gen1 Lanes x1 | |
[ 2.952346] cortina-pcie f4326000.pcie: PCI host bridge to bus 0001:00 | |
[ 2.958708] pci_bus 0001:00: root bus resource [bus 00-ff] | |
[ 2.964192] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) | |
[ 2.973127] pci_bus 0001:00: root bus resource [mem 0xb0400000-0xbfffffff] | |
[ 2.980003] pci 0001:00:00.0: [16c3:abcd] type 01 class 0x060400 | |
[ 2.985990] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
[ 2.992707] pci 0001:00:00.0: supports D1 D2 | |
[ 2.996895] pci 0001:00:00.0: PME# supported from D0 D1 D3hot | |
[ 3.004796] pci 0001:01:00.0: [10ec:0192] type 00 class 0x028000 | |
[ 3.010738] pci 0001:01:00.0: reg 0x10: [io 0x10000-0x100ff] | |
[ 3.016490] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit] | |
[ 3.023814] pci 0001:01:00.0: supports D1 D2 | |
[ 3.027914] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ 3.052456] pci 0001:00:00.0: BAR 8: assigned [mem 0xb0400000-0xb04fffff] | |
[ 3.059081] pci 0001:00:00.0: BAR 6: assigned [mem 0xb0500000-0xb050ffff pref] | |
[ 3.066303] pci 0001:00:00.0: BAR 7: assigned [io 0x10000-0x10fff] | |
[ 3.072549] pci 0001:01:00.0: BAR 2: assigned [mem 0xb0400000-0xb04fffff 64bit] | |
[ 3.079887] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] | |
[ 3.086103] pci 0001:00:00.0: PCI bridge to [bus 01-ff] | |
[ 3.091291] pci 0001:00:00.0: bridge window [io 0x10000-0x10fff] | |
[ 3.097532] pci 0001:00:00.0: bridge window [mem 0xb0400000-0xb04fffff] | |
[ 3.106462] ubi0: attaching mtd4 | |
[ 4.561078] ubi0: scanning is finished | |
[ 4.576914] ubi0: attached mtd4 (name "ubi_device", size 245 MiB) | |
[ 4.582868] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
[ 4.589703] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
[ 4.596483] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
[ 4.603426] ubi0: good PEBs: 1966, bad PEBs: 0, corrupted PEBs: 0 | |
[ 4.609493] ubi0: user volume: 10, internal volumes: 1, max. volumes count: 128 | |
[ 4.616801] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1066206694 | |
[ 4.625907] ubi0: available PEBs: 788, total reserved PEBs: 1178, PEBs reserved for bad PEB handling: 40 | |
[ 4.635384] ubi0: background thread "ubi_bgt0d" started, PID 1270 | |
[ 4.648967] ca_pmx_request_gpio: offset:63 reg_off:1c bit_off:3 | |
[ 4.654922] ca_pmx_request_gpio: offset:67 reg_off:1c bit_off:7 | |
[ 4.660800] ca_pmx_request_gpio: offset:8 reg_off:10 bit_off:8 | |
[ 4.666726] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
[ 4.673956] VoIP control bind 1 (1) instances successfully. | |
[ 4.679367] index dsp_cpuid dsp_cch host_cch | |
[ 4.683637] ----- --------- ------- -------- | |
[ 4.687874] 0 0 0 0 | |
[ 4.691701] voip spin lock init done | |
[ 4.695344] VoIP RX netfilter hook init done! | |
[ 4.699674] VoIP RX netfilter hook for IPv6 init done! | |
[ 4.704805] =============RTK VOIP SUITE============= | |
[ 4.709741] SDK VoIP Version: VoIP-1.6-DSP-R5523-Luna-R24-Integrate_RTL_CA | |
[ 4.716695] Board CFG Model : | |
[ 4.719809] INITIAL VOIP MANAGER PROGRAM | |
[ 4.727624] VFS: Mounted root (squashfs filesystem) readonly on device 31:8. | |
[ 4.737934] devtmpfs: mounted | |
[ 4.741563] Freeing unused kernel memory: 1536K | |
[ 4.780850] Run /sbin/init as init process | |
Bad inittab entry at line 34 | |
starting pid 1326, tty '': '/etc/init.d/rcS' | |
=== Start to run rc0 / rc63 === | |
----- do_rc [/etc/init.d/rc2] ----- | |
[ 5.440682] smuxdev: loading out-of-tree module taints kernel. | |
[ 5.449638] smuxdev: loaded | |
WARN: conflicting configurations in /etc/fstab and /etc/default/rcS | |
regarding the writability of rootfs. Please fix one of them. | |
[ 5.921390] UBIFS (ubi0:0): Mounting in unauthenticated mode | |
[ 5.927087] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1358 | |
[ 5.973609] UBIFS (ubi0:0): recovery needed | |
[ 6.081547] UBIFS (ubi0:0): recovery completed | |
[ 6.085929] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubi_Config" | |
[ 6.093574] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
[ 6.103475] UBIFS (ubi0:0): FS size: 9269248 bytes (8 MiB, 73 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) | |
[ 6.113550] UBIFS (ubi0:0): reserved for root: 437809 bytes (427 KiB) | |
[ 6.119974] UBIFS (ubi0:0): media format: w5/r0 (latest is w5/r0), UUID CBC5688D-BE09-42D6-8ACF-FFD773EDDD66, small LPT model | |
[scfg.txt]Copy /etc/scfg.txt to /var/config/. | |
----- do_rc [/etc/init.d/rc3] ----- | |
WARNING: table_setting: Invalid table entry name: MIB_SMB_ANNONYMOUS | |
set_msgqueue_max_size:425> set msgqidds.msg_qbytes=36080 OK | |
set_msgqueue_max_size:425> set msgqidds.msg_qbytes=36080 OK | |
aipc: write image successful. size=2652272 rc=2652272 wc=2652272 da=0x22a0400 remain=0 | |
[ 7.640479] ifmode 2 | |
[ 7.642536] ext_clk 0 | |
[ 7.644763] clk_enhance 1 | |
[ 7.647368] divisor 24 | |
[ 7.649715] pclk 2048 | |
[ 7.651988] spi_cs 0 | |
[ 7.654145] metadata 0x2 | |
[ 7.656676] aipc: (0528)aipc_dev_ioctl boot dsp | |
[ 7.665286] aipc: (0530)aipc_dev_ioctl boot dsp done | |
Wait DSP 0/1 booting ...... | |
Wait DSP ok. wait_cnt=0 | |
DSP 0 Software Ready! | |
[ 7.762465] ca-log: init calog-ioctl-dev OK (max_level 9, default_level 4) | |
[ 7.769400] ca-pal: init ca_pal_ioctl OK | |
[ 7.823762] ca-peri:hw_timer irq 47 install | |
[ 7.838922] SCFG initialize start. | |
[ 7.845843] SCFG initialize done. | |
[ 8.265360] ca_ne:ca_ni_init_module_probe:3649: Cortina Network Interface Driver 0.0.1 | |
[ 8.273159] error: aal_pon_mac_mode_get FAIL, pon_mac_mode = 255. | |
[ 8.279224] ca_ne_reg_init: mem_resource for NI registers=[mem 0x4f4300000-0x4f430ffff] | |
[ 8.287226] ca_ne_reg_init: ca_ne_reg_base=0x(____ptrval____) | |
[ 8.292951] ca_ne_reg_init: mem_resource for GLOBAL NETWORK ENGINE INTRRUPT registers=[mem 0x4f4320164-0x4f4320173] | |
[ 8.303371] ca_ne_reg_init: ca_ne_glb_ne_intr_reg_base=0x(____ptrval____) | |
[ 8.310138] ca_ne_reg_init: mem_resource for MDIO registers=[mem 0x4f4329118-0x4f432915f] | |
[ 8.318316] ca_ne_reg_init: ca_per_mdio_reg_base=0x(____ptrval____) | |
[ 8.324571] ca_ne_reg_init: resource for XRAM=[mem 0xf4500000-0xf4501fff] | |
[ 8.331351] ca_ne_reg_init: ca_xram_reg_base=0x(____ptrval____) | |
[ 8.337246] ca_ne_reg_init: mem_resource for DMA LSO registers=[mem 0x4f7001000-0x4f7001fff] | |
[ 8.345682] ca_ne_reg_init: ca_dma_lso_reg_base=0x(____ptrval____) | |
[ 8.351854] ca_ne_reg_init: resource for SRAM=[mem 0x80000000-0x8003bfff] | |
[ 8.358611] ca_ne_reg_init: ca_ne_sram_phy_base=0x80000000 end 0x(____ptrval____) size 0x3c000 | |
[ 8.367237] ca_ne_reg_init: ca_ne_sram_base=0x(____ptrval____) | |
[ 8.373073] ca_ne_reg_init: resource for DDR=[mem 0x0bc48000-0x0bca7fff] | |
[ 8.379721] ca_ne_reg_init: ca_ne_ddr_coherent_reserved_size=0x60000 | |
[ 8.386082] ca_ne_reg_init: ca_ne_ddr_coherent_base=0x(____ptrval____), ca_ne_ddr_coherent_phy_base=0xbc48000 | |
[ 8.395985] ca_ne_reg_init: resource for DDR non-cache=[mem 0x109000000-0x10aa4ffff] | |
[ 8.403725] ca_ne_reg_init: ca_ne_ddr_noncache_reserved_size=0x1a50000 | |
[ 8.410217] ca_ne_reg_init: ca_ne_ddr_noncache_base=(____ptrval____), ca_ne_ddr_noncache_phy_base=0x109000000 | |
[ 8.420139] ca_ne_reg_init: resource for PONGLB=[mem 0x4f4320000-0x4f43202ff] | |
[ 8.427260] ca_venus_pon_glb_reg_iobase = 0x(____ptrval____) | |
[ 8.432912] ca_ne_reg_init: resource for PON=[mem 0x4f5500000-0x4f550bfff] | |
[ 8.439762] ca_venus_pon_reg_iobase = 0x(____ptrval____) | |
[ 8.445064] ca_ne_reg_init: resource for PERI=0xf4329000 | |
[ 8.450359] ca_venus_peri_reg_iobase = 0x(____ptrval____) | |
[ 8.455759] ca_ne_reg_init: mem_resource for AXI REO registers=[mem 0x4f432d000-0x4f432f0b7] | |
[ 8.464183] ca_ne_reg_init: ca_ne_axi_reo_reg_base=0x(____ptrval____) | |
[ 8.470605] ca_ne_reg_init: mem_resource for ASIC GPHY registers=[mem 0x4f4600000-0x4f46fffff] | |
[ 8.479225] ca_ne_reg_init: ca_ne_phy_reg_base=0x(____ptrval____) | |
[ 8.485298] ca_ne_reg_init: mem_resource for ASIC SGMII LP registers=[mem 0x4f433a000-0x4f433afff] | |
[ 8.494250] ca_ne_reg_init: ca_ne_sgmii_lp_reg_base=0x(____ptrval____) | |
[ 8.500764] ca_ne_reg_init: mem_resource for CA_NI_MEM_RESOURCE_QX_REGS registers=[mem 0x4f550d000-0x4f550dfff] | |
[ 8.510839] ca_ne_reg_init: ca_ne_qx_reg_base=0x(____ptrval____) | |
[ 8.516827] ca_ne_reg_init: mem_resource for CA_NI_MEM_RESOURCE_GPHY_WRAP_REGS registers=[mem 0x4f4700000-0x4f47000ff] | |
[ 8.527517] ca_ne_reg_init: ca_ne_gphy_wrap_reg_base=0x(____ptrval____) | |
[ 8.534124] ca_ne_reg_init: mem_resource for LDMA registers=[mem 0x90301000-0x90302fff] | |
[ 8.542114] ca_ne_reg_init: ca_ldma_reg_base=0x(____ptrval____) | |
[ 8.548016] ca_ne_reg_init: mem_resource for CA_NI_MEM_RESOURCE_S0_SDS_REGS registers=[mem 0x4f4333000-0x4f4338fff] | |
[ 8.558448] ca_ne_reg_init: ca_ne_s0_sds_reg_base=0x(____ptrval____) | |
[ 8.564786] Enter <ca77xx_pon_probe, 849> | |
[ 8.568873] ca-pon: proc files init OK. | |
[ 8.572696] ca-pon: load PON_MAC_MODE: IGNORED | |
[ 8.577115] ca-pon: Device Tree load start | |
[ 8.581299] ca-pon: dg interrupt is 131 | |
[ 8.585143] ca-pon: found 1 interrupts in Device Tree | |
[ 8.590155] ca-pon: interrupt 0 index is 14 | |
[ 8.594413] ca-pon: Device Tree load OK | |
[ 8.598225] End <ca77xx_pon_probe, 875> | |
[ 8.607186] ca_ni_global_reset: Port 4 connect to HSGMII | |
[ 8.612483] ca_ni_global_reset: sgmii_phy=(____ptrval____) | |
[ 8.620895] ca_ni_global_reset: Do external RESET for RTL8367SB HSGMII mode.... | |
[ 8.628057] ca-ni 4f4300000.ethernet: OF get ext_reset failed!! | |
[ 8.736727] ca_load_init: please make sure CFG_ID_NE_SRAM_PHY_BASE=0xc0000000 consistent with device tree!! | |
[ 8.746315] =================ca_ni_init_config================ | |
[ 8.752135] ca_load_init: ca_ne_sram_base=(____ptrval____), ca_ne_ddr_noncache_base=(____ptrval____) | |
[ 8.761258] ca_load_init: ca_ne_sram_phy_base=0xc0000000, ca_ne_ddr_noncache_phy_base=0x9000000, ca_ne_ddr_coherent_phy_base=0xbc48000 | |
[ 8.773332] ================================================== | |
[ 8.779144] ca_load_init: ca_ni_use_build_skb=0 | |
[ 8.783672] ca_load_init: ca_ni_napi_budget=64 | |
[ 8.788093] ca_load_init: ca_ni_tx_timer_enable=0 | |
[ 8.792795] ca_load_init: ca_ni_use_qm_eq_refill_int=0 | |
[ 8.797911] ca_load_init: ca_ni_cpu64_pool0_eq_id=4 | |
[ 8.802786] ca_load_init: ca_ni_cpu64_pool1_eq_id=15 | |
[ 8.807728] ca_load_init: ca_ni_cpu64_use_fbm=0 | |
[ 8.812256] ca_load_init: ca_ni_cpu64_pool0_fbm_pool_id=6 | |
[ 8.817632] ca_load_init: ca_ni_cpu64_pool1_fbm_pool_id=7 | |
[ 8.823029] ca_load_init: ca_ni_cpu64_pool0_buf_count=768 | |
[ 8.828406] ca_load_init: ca_ni_cpu64_pool1_buf_count=0 | |
[ 8.833628] ca_load_init: ca_ni_use_qm_eq_refill_tasklet=1 | |
[ 8.839092] ca_ni_read_drv_config: index=0 | |
[ 8.843184] ca_ni_read_drv_config: my_mac_index = 0 | |
[ 8.848039] ca_ni_read_drv_config: cpu_port_id = 0 | |
[ 8.852835] ca_ni_read_drv_config: egress_cpu_port_id = 0 | |
[ 8.858208] ca_ni_read_drv_config: i=0, num_cpu_port=1, dev_name=eth0 | |
[ 8.864646] ca_ni_load_driver_init: i=0 | |
[ 8.868457] ca_ni_read_drv_config: index=1 | |
[ 8.872550] ca_ni_read_drv_config: my_mac_index = 1 | |
[ 8.877405] ca_ni_read_drv_config: cpu_port_id = 1 | |
[ 8.882193] ca_ni_read_drv_config: egress_cpu_port_id = 1 | |
[ 8.887572] ca_ni_read_drv_config: i=1, num_cpu_port=1, dev_name=eth1 | |
[ 8.894009] ca_ni_load_driver_init: i=1 | |
[ 8.897823] ca_ni_read_drv_config: index=2 | |
[ 8.901915] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 8.906857] ca_ni_read_drv_config: cpu_port_id = 2 | |
[ 8.911645] ca_ni_read_drv_config: egress_cpu_port_id = 2 | |
[ 8.917022] ca_ni_load_driver_init: i=2 | |
[ 8.920855] ca_ni_read_drv_config: index=3 | |
[ 8.924929] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 8.929880] ca_ni_read_drv_config: cpu_port_id = 3 | |
[ 8.934669] ca_ni_read_drv_config: egress_cpu_port_id = 3 | |
[ 8.940045] ca_ni_load_driver_init: i=3 | |
[ 8.943878] ca_ni_read_drv_config: index=4 | |
[ 8.947951] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 8.952913] ca_ni_read_drv_config: cpu_port_id = 4 | |
[ 8.957682] ca_ni_read_drv_config: egress_cpu_port_id = 4 | |
[ 8.963079] ca_ni_load_driver_init: i=4 | |
[ 8.966891] ca_ni_read_drv_config: index=5 | |
[ 8.970992] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 8.975927] ca_ni_read_drv_config: cpu_port_id = 5 | |
[ 8.980705] ca_ni_read_drv_config: egress_cpu_port_id = 5 | |
[ 8.986103] ca_ni_load_driver_init: i=5 | |
[ 8.989915] ca_ni_read_drv_config: index=6 | |
[ 8.994008] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 8.998950] ca_ni_read_drv_config: cpu_port_id = 6 | |
[ 9.003739] ca_ni_read_drv_config: egress_cpu_port_id = 6 | |
[ 9.009115] ca_ni_load_driver_init: i=6 | |
[ 9.012948] ca_ni_read_drv_config: index=7 | |
[ 9.017021] ca_ni_read_drv_config: my_mac_index = -1 | |
[ 9.021983] ca_ni_read_drv_config: cpu_port_id = 7 | |
[ 9.026751] ca_ni_read_drv_config: egress_cpu_port_id = 7 | |
[ 9.032148] ca_ni_load_driver_init: i=7 | |
[ 9.035961] ca_ni_load_driver_init: ca_ni_num_intf=2 | |
[ 9.040923] ca_ni_load_driver_init: index=0 | |
[ 9.045083] ca_ni_load_driver_init: driver_startup_config.enable = 1 | |
[ 9.051436] ca_ni_load_driver_init: driver_startup_config.my_mac_index = 0 | |
[ 9.058290] ca_ni_load_driver_init: driver_startup_config.egress_cpu_port_id = 0 | |
[ 9.065684] ca_ni_load_driver_init: driver_startup_config.cpu_port_id[0] = 0 | |
[ 9.072720] ca_ni_load_driver_init: index=1 | |
[ 9.076882] ca_ni_load_driver_init: driver_startup_config.enable = 1 | |
[ 9.083234] ca_ni_load_driver_init: driver_startup_config.my_mac_index = 1 | |
[ 9.090087] ca_ni_load_driver_init: driver_startup_config.egress_cpu_port_id = 1 | |
[ 9.097489] ca_ni_load_driver_init: driver_startup_config.cpu_port_id[0] = 1 | |
[ 9.104533] aal_l3qm_init_startup_config: nic rx WITH allocate scatter(env: eq_rule 0, build_skb 0, budget 64) | |
[ 9.114630] aal_l3qm_create_sram_map: total required SRAM size 0x80 | |
[ 9.120860] aal_l3qm_dump_sram_map: Dump SRAM map... | |
[ 9.125793] [ Main hash ] | |
[ 9.128401] overflow hash fib start addr = 0xffffffc011100080 | |
[ 9.134148] overflow hash fib physical addr = 0x80000000 | |
[ 9.139434] overflow hash fib length = 48 | |
[ 9.143444] overflow hash fib count = 0 | |
[ 9.147255] default hash fib internal reg mode = 1 | |
[ 9.152043] default hash fib start addr = N/A (use internal reg) | |
[ 9.158027] default hash fib physical addr = N/A (use internal reg) | |
[ 9.164294] default hash fib length = 16 | |
[ 9.168192] default hash fib count = 16 | |
[ 9.172026] hash action cache fib internal sram mode = 1 | |
[ 9.177314] hash action cache fib start addr = N/A (use internal sram) | |
[ 9.183842] hash action cache fib physical addr = N/A (use internal sram) | |
[ 9.190607] hash action cache fib length = 48 | |
[ 9.194963] hash action cache fib count = 2048 | |
[ 9.199384] sram start vir addr = 0xffffffc011100000, used size = 0x80, cur vir addr = 0xffffffc011100080 | |
[ 9.208952] aal_l3qm_create_ddr_map: total size of DDR coherent consumed=0x10000/0x60000 | |
[ 9.217039] aal_l3qm_create_ddr_map: total size of DDR non-cache consumed=0x40000/0x1a50000 | |
[ 9.225372] aal_l3qm_dump_ddr_map: Dump DDR map... | |
[ 9.230136] [ DDR coherent ] | |
[ 9.233018] CPU pool0 buffer start addr = 0xffffffff | |
[ 9.237957] CPU pool0 buffer physical addr = 0xffffffff | |
[ 9.243181] CPU pool0 buffer count = 768 | |
[ 9.247079] CPU pool0 buffer size = 2048 | |
[ 9.251000] CPU pool0 consumed size = 0 | |
[ 9.254812] CPU pool1 buffer start addr = 0xffffffff | |
[ 9.259763] CPU pool1 buffer physical addr = 0xffffffff | |
[ 9.264989] CPU pool1 buffer count = 0 | |
[ 9.268712] CPU pool1 buffer size = 2048 | |
[ 9.272634] CPU pool1 consumed size = -553853353983 | |
[ 9.277487] CPU RX FIFO buffer start addr = 0xffffff800bc48000 | |
[ 9.283321] CPU RX FIFO buffer physical addr = 0xbc48000 | |
[ 9.288608] CPU RX FIFO count = 16384 | |
[ 9.292268] CPU RX FIFO size = 4 | |
[ 9.295471] CPU RX FIFO consumed size = 65536 | |
[ 9.299814] [ DDR non-cache ] | |
[ 9.302781] DEEPQ pool0 buffer start addr = 0xffffffc014000000 | |
[ 9.308591] DEEPQ pool0 buffer physical addr = 0x9000000 | |
[ 9.313901] DEEPQ pool0 buffer count = 4096 | |
[ 9.318060] DEEPQ pool0 buffer size = 512 | |
[ 9.322068] DEEPQ pool0 consumed size = 0 | |
[ 9.326054] DEEPQ pool1 buffer start addr = 0xffffffc014000000 | |
[ 9.331893] DEEPQ pool1 buffer physical addr = 0x9000000 | |
[ 9.337174] DEEPQ pool1 buffer count = 11808 | |
[ 9.341444] DEEPQ pool1 buffer size = 2048 | |
[ 9.345514] DEEPQ pool1 consumed size = 24182784 | |
[ 9.350118] Main Hash table entry start addr = 0xffffffc015710000 | |
[ 9.356213] Main Hash table entry physical addr = 0xa710000 | |
[ 9.361773] Main Hash tabel entry length = 4 | |
[ 9.366017] Main Hash table entry count = 65536 | |
[ 9.370536] Main Hash table consumed size = 262144 | |
[ 9.375326] Main FIB action table entry addr = 0xffffffc015750000 | |
[ 9.381407] Main FIB action table entry physical addr = 0xa750000 | |
[ 9.387477] Main FIB action table entry length = 48 | |
[ 9.392354] Main FIB action table entry count = 65536 | |
[ 9.397381] Main FIB action table consumed size = 3145856 | |
[ 9.405427] L2_QM : EQ-0(0), EQ-1(4K) - system uses 4K * 64bytes buffer configuration. | |
[ 9.413196] L2_QM : port private buffer number is 29 | |
[ 9.418148] L2_TM : enable ES for port 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 15 | |
[ 9.427051] L2_TE : initialize WRED profile & selection table ... | |
[ 9.427060] done. | |
[ 9.435154] L3_TE : initialize WRED profile & selection table ... | |
[ 9.435162] done. | |
[ 9.443158] L3_TE : initialize PIE ... | |
[ 9.443458] done. | |
[ 9.449092] L2_TM_CB : initialize VoQ based buffer profile & selection table ... | |
[ 9.449113] done. | |
[ 9.458466] done. | |
[ 9.460340] done. | |
[ 9.462255] | |
[ 9.462255] | |
[ 9.462255] end of aal_l2_tm_cb_init | |
[ 9.462255] | |
[ 9.472884] === device_id 0 === | |
[ 9.475856] === L3FE_STG0_CTRL : 0x0014787c === | |
[ 9.480373] lpb_idx_mode=0 | |
[ 9.483081] mac_fltr_fail_pkt_mru_chk_en=0 | |
[ 9.487150] mru_chk_fail_pkt_l2_lkup_dis=1 | |
[ 9.491247] other_mac_pkt_keep_lspid_en=1 | |
[ 9.495230] wan_lspid=0x07 | |
[ 9.497924] use_lspid_ovwr_o_lspid=0 | |
[ 9.501498] spcl_pkt_keep_old=1 | |
[ 9.504613] wan_lspid_1=0x07 | |
[ 9.507480] msk_my_mac_match_en_for_lspid_upd=1 | |
[ 9.512010] keep_lspid_unchange=0 | |
[ 9.515300] my_mac_fail_pkt_bypass_cls=1 | |
[ 9.519209] chk_mymac_for_lan=0 | |
[ 9.522350] === L3FE_STG0_LDPID_MAP : 0x03985907 === | |
[ 9.527289] rule_0=0x07, lpb_idx_0=0 | |
[ 9.530863] rule_1=0x19, lpb_idx_1=1 | |
[ 9.534414] rule_2=0x18, lpb_idx_2=2 | |
[ 9.537975] default, lpb_idx_3=3 | |
[ 9.541202] === L3FE_STG0_LPB_TBL_0 : 0x18100190 === | |
[ 9.546142] lspid=0x18, default_ldpid=0x19 | |
[ 9.550226] special_en=1, special_sel=0 | |
[ 9.554062] mac_da_match_en=0, mac_da_match_mask=0, t1_ctrl=0, t5_ctrl=15 | |
[ 9.560837] === L3FE_STG0_LPB_TBL_1 : 0x19180180 === | |
[ 9.565778] lspid=0x19, default_ldpid=0x18 | |
[ 9.569861] special_en=1, special_sel=1 | |
[ 9.573704] mac_da_match_en=0, mac_da_match_mask=0, t1_ctrl=1, t5_ctrl=15 | |
[ 9.580460] === L3FE_STG0_LPB_TBL_2 : 0x18100190 === | |
[ 9.585425] lspid=0x18, default_ldpid=0x19 | |
[ 9.589496] special_en=1, special_sel=0 | |
[ 9.593332] mac_da_match_en=0, mac_da_match_mask=0, t1_ctrl=0, t5_ctrl=15 | |
[ 9.600095] === L3FE_STG0_LPB_TBL_3 : 0x1a1bfd90 === | |
[ 9.605058] stg0_lpb_tbl_hi.wrd=0x1a1bfd90 | |
[ 9.609130] lspid=0x1a, default_ldpid=0x19 | |
[ 9.613225] special_en=1, special_sel=1 | |
[ 9.617037] mac_da_match_en=0, mac_da_match_mask=255, t1_ctrl=1, t5_ctrl=15 | |
[ 9.624228] _hash_tbls_init: data.chip_revision=B | |
[ 9.630074] aal_hash_hash_table_size_set: hashTbl_size = 65536, hashBucket_size = 8, hashAction_width = 256 | |
[ 9.639667] aal_hash_hash_table_size_set: hash_ini.bf.ht_size = 7 | |
[ 9.645743] aal_hash_hash_table_size_set: hash_ini.bf.hb_size = 1 | |
[ 9.651825] aal_hash_hash_table_size_set: hash_ini.bf.ha_width = 3 | |
[ 9.657983] aal_hash_cache_table_size_set: hach cache mode: INTERNAL_SRAM, cacheTbl_size = 2048, cacheAction_width = 224 | |
[ 9.668853] aal_hash_cache_table_size_set: hash_cache_ini.bf.ct_size = 4 | |
[ 9.675542] aal_hash_cache_table_size_set: hash_cache_ini.bf.ca_width = 3 | |
[ 9.682318] aal_hash_cache_table_size_set: hash_cache_ini.bf.fib_sram = 1 | |
[ 9.689082] aal_hash_cache_table_size_set: hash_cache_ini.bf.cache_half = 0 | |
[ 9.696054] aal_hash_cache_age0_hit_set: hash_cache_ini.bf.cache_age0_hit = 1 | |
[ 9.703175] _hash_misc_init: HASH default fib: internal register mode, crc_ntfy_en: enable | |
[ 9.711528] <__aal_fdb_sw_lrn_tbl_create, 1513> | |
[ 9.716021] <__aal_fdb_static_mac_create, 1637> | |
[ 9.721023] FDB init OK | |
[ 9.724304] ca-ne: init MDIO OK. | |
[ 9.727452] load CA_CFG_ID_GE_PORT_BIT_MAP: 0x1f | |
[ 9.732140] load CA_CFG_ID_XGE_PORT_BIT_MAP: 0x40. | |
[ 9.736833] Valid Ethernet ports bitmap : 0x5f | |
[ 9.741383] ethernet port 0 interface type: 0 | |
[ 9.745781] ethernet port 1 interface type: 0 | |
[ 9.750211] ethernet port 2 interface type: 0 | |
[ 9.754657] ethernet port 3 interface type: 0 | |
[ 9.759074] ethernet port 4 interface type: 10 | |
[ 9.763601] ethernet port 6 interface type: 8 | |
[ 9.768022] load Ethernet port SCFG OK | |
[ 9.771768] port_id=0 enable = 0 | |
[ 9.775060] set port 0 mac enable to 0 | |
[ 9.778971] port_id=1 enable = 0 | |
[ 9.782279] set port 1 mac enable to 0 | |
[ 9.786181] port_id=2 enable = 0 | |
[ 9.789481] set port 2 mac enable to 0 | |
[ 9.793402] port_id=3 enable = 0 | |
[ 9.796692] set port 3 mac enable to 0 | |
[ 9.800603] port_id=4 enable = 0 | |
[ 9.803912] set port 4 mac enable to 0 | |
[ 9.807814] port_id=6 enable = 0 | |
[ 9.811126] set XE port 6 mac enable to 0 | |
[ 9.815286] disalbe all ethernet ports OK | |
[ 9.819280] auto detect Ethernet PHY start ... | |
[ 9.824730] ca-ne: read Ethernet PHY 1 IDs(0x1c 0xcac4): phy_oui 0x732, phy_model 0x2c . | |
[ 9.832666] ca-ne: detect Eth PHY RTL8211 at PHY addr 1 | |
[ 9.841888] attch PHY addr 1 to port 0 driver | |
[ 9.846081] ca-ne: read Ethernet PHY 2 IDs(0x1c 0xcac4): phy_oui 0x732, phy_model 0x2c . | |
[ 9.854168] ca-ne: detect Eth PHY RTL8211 at PHY addr 2 | |
[ 9.863379] attch PHY addr 2 to port 1 driver | |
[ 9.867572] ca-ne: read Ethernet PHY 3 IDs(0x1c 0xcac4): phy_oui 0x732, phy_model 0x2c . | |
[ 9.875659] ca-ne: detect Eth PHY RTL8211 at PHY addr 3 | |
[ 9.884878] attch PHY addr 3 to port 2 driver | |
[ 9.889071] ca-ne: read Ethernet PHY 4 IDs(0x1c 0xcac4): phy_oui 0x732, phy_model 0x2c . | |
[ 9.897158] ca-ne: detect Eth PHY RTL8211 at PHY addr 4 | |
[ 9.906375] attch PHY addr 4 to port 3 driver | |
[ 9.910828] ca-ne: read Ethernet PHY 7 IDs(0x1c 0xc849): phy_oui 0x732, phy_model 0x4 . | |
[ 9.918666] ca-ne: !!!No driver support for PHY at addr 7 | |
[ 9.924171] detect Ethernet PHY done, find 4 PHYs | |
[ 9.964808] ca-ne: init intergrated PHY start | |
[ 9.969084] ca-ne: reset internal PHY for patch | |
[ 9.986650] phy_cal_load: param dev=(____ptrval____) cell=(____ptrval____) | |
[ 9.993385] phy_cal_load: buf=(____ptrval____), len=4, sizeof(phy_param)=4 | |
[ 10.000226] phy_cal_load: read phy_param buf=(____ptrval____) len=4 | |
[ 10.006502] phy_cal_load: calibration dev=(____ptrval____) cell=(____ptrval____) | |
[ 10.013879] phy_cal_load: read phy_k_data buf=(____ptrval____) len=32 | |
[ 10.020299] phy_cal_load: phy_patch dev=(____ptrval____) cell=(____ptrval____) | |
[ 10.027516] phy_cal_load: read phy_patch buf=(____ptrval____) len=16 | |
[ 10.033857] rc_cal_len_s(0): 0x8889 | |
[ 10.037321] rc_cal_len_l(0): 0x8889 | |
[ 10.040979] amp_cal(0): 0x5566 | |
[ 10.044271] r_cal(0): 0x9999 | |
[ 10.047573] r_cal_msb(0): 0x0000 | |
[ 10.051231] rc_cal_len_s(1): 0x8898 | |
[ 10.054696] rc_cal_len_l(1): 0x8898 | |
[ 10.058345] amp_cal(1): 0x5554 | |
[ 10.061655] r_cal(1): 0x9999 | |
[ 10.064948] r_cal_msb(1): 0x0000 | |
[ 10.068597] rc_cal_len_s(2): 0x9999 | |
[ 10.072092] rc_cal_len_l(2): 0x9999 | |
[ 10.075721] amp_cal(2): 0x6666 | |
[ 10.079022] r_cal(2): 0x9999 | |
[ 10.082344] r_cal_msb(2): 0x0000 | |
[ 10.085973] rc_cal_len_s(3): 0x8898 | |
[ 10.089448] rc_cal_len_l(3): 0x8898 | |
[ 10.093111] amp_cal(3): 0x6566 | |
[ 10.096399] r_cal(3): 0x9999 | |
[ 10.099700] r_cal_msb(3): 0x0000 | |
[ 10.103361] start to write eFuse data to port 0 phy_addr 1 | |
[ 10.108824] rc_l 1 rc_s 1 r 1 amp 1 500m 0 | |
[ 10.114927] start to write eFuse data to port 1 phy_addr 2 | |
[ 10.120246] rc_l 1 rc_s 1 r 1 amp 1 500m 0 | |
[ 10.126345] start to write eFuse data to port 2 phy_addr 3 | |
[ 10.131678] rc_l 1 rc_s 1 r 1 amp 1 500m 0 | |
[ 10.137753] start to write eFuse data to port 3 phy_addr 4 | |
[ 10.143083] rc_l 1 rc_s 1 r 1 amp 1 500m 0 | |
[ 10.149161] ca-ne: phy_cal_load return 0 | |
[ 10.152927] aal_phy_get_chip_revision: data.chip_revision=B | |
[ 10.306506] aal_phy_get_chip_revision: data.chip_revision=B | |
[ 10.587975] ca-ne: init intergrated PHY OK | |
[ 10.592017] aal_ni_eth_port_config_set: port_id=4, phy_intfs[port_id]=10, speed=2, port_static_cfg.wrd=0x200 | |
[ 10.603823] ca-ne: aal_ni_reset_intf init ... OK NI_HV_GLB_INTF_RST_CONFIG = 0x0 | |
[ 10.611818] start restore Ethernet ports configuration from SCFG | |
[ 10.617660] aal_eth_ports_restore: Enable port 0 OK | |
[ 10.622536] aal_eth_ports_restore: Enable port 1 OK | |
[ 10.627389] aal_eth_ports_restore: Enable port 2 OK | |
[ 10.632268] aal_eth_ports_restore: Enable port 3 OK | |
[ 10.637119] aal_eth_ports_restore: Enable port 4 OK | |
[ 10.641994] aal_eth_ports_restore: Enable port 6 OK | |
[ 10.646988] ca-ne: port scan thread create successfully. | |
[ 10.648659] init L2FE,L3FE vlan done. | |
[ 10.655856] aal_hash_mem_init: hash_overflow_fib data_len=0x0, hash_overflow_fib_virtual_addr=0x(____ptrval____) | |
[ 10.665976] aal_hash_mem_init: hash_main_fib data_len=0x300000, hash_action_table_virtual_addr=0x(____ptrval____) | |
[ 10.742470] aal_hash_mem_init: hash_main_hash data_len=0x40000, hash_table_virtual_addr=0x(____ptrval____) | |
[ 10.757495] aal_ni_reset: reset NI done! | |
[ 10.761259] aal_ni_init_tx_dma_lso: i = 0, vp_control.wrd=0xff | |
[ 10.767070] aal_ni_init_tx_dma_lso: i = 1, vp_control.wrd=0xff | |
[ 10.772901] aal_ni_init_tx_dma_lso: i = 2, vp_control.wrd=0xff | |
[ 10.778713] aal_ni_init_tx_dma_lso: i = 3, vp_control.wrd=0xff | |
[ 10.784541] aal_ni_init_tx_dma_lso: i = 4, vp_control.wrd=0xff | |
[ 10.790354] aal_ni_init_tx_dma_lso: i = 5, vp_control.wrd=0xff | |
[ 10.796182] aal_ni_init_tx_dma_lso: i = 6, vp_control.wrd=0xff | |
[ 10.802004] aal_ni_init_tx_dma_lso: i = 7, vp_control.wrd=0xff | |
[ 10.807817] aal_ni_init_tx_dma_lso: i = 8, vp_control.wrd=0xff | |
[ 10.813648] aal_ni_init_tx_dma_lso: i = 9, vp_control.wrd=0xff | |
[ 10.819459] aal_ni_init_tx_dma_lso: i = 10, vp_control.wrd=0xff | |
[ 10.825383] aal_ni_init_tx_dma_lso: i = 11, vp_control.wrd=0xff | |
[ 10.831288] Padding by DMAAFT rather than LSO | |
[ 10.835622] aal_ni_init_nirx_l3fe_demux, 699, FIXME: QM ni port not work | |
[ 10.842319] aal_ni_init_ni: ======= NI_HV_GLB_INTERNAL_PORT_ID_CFG ============== | |
[ 10.849790] aal_l3qm_init_empty_buffer_CPU: i=4, reg_off=0xf4306240, cfg2_eq.wrd=0x580d | |
[ 10.857783] aal_l3qm_init_empty_buffer_CPU: i=5, reg_off=0xf4306254, cfg2_eq.wrd=0x580d | |
[ 10.865776] aal_l3qm_init_empty_buffer_CPU: i=6, reg_off=0xf4306268, cfg2_eq.wrd=0xf80d | |
[ 10.873770] aal_l3qm_init_empty_buffer_CPU: i=7, reg_off=0xf430627c, cfg2_eq.wrd=0x580d | |
[ 10.881792] capsram size is 278528 currect used size is 128. | |
[ 10.887487] capsram reseve some mem for epp and dmalso, currect used size is 128 srvd size is 0. | |
[ 10.896275] aal_l3qm_init_DQ_pools_pool0: sram_phy_start=0x80000080 | |
[ 10.902524] aal_l3qm_init_DQ_pools_pool0: pool_id=0, bid_start=4352 | |
[ 10.908771] aal_l3qm_init_DQ_pools_pool0: cfg0_eq.wrd=0x80000081, reg_off=0xf43061e8 | |
[ 10.916513] aal_l3qm_init_DQ_pools_pool0: cfg1_eq.wrd=0xf31100, reg_off=0xf43061ec | |
[ 10.924071] aal_l3qm_init_DQ_pools_pool0: cfg2_eq.wrd=0xff03, reg_off=0xf43061f0 | |
[ 10.931458] aal_l3qm_init_DQ_pools_pool0: cfg3_eq.wrd=0x10, reg_off=0xf43061f4 | |
[ 10.938658] aal_l3qm_init_DQ_pools_pool0: cfg4_eq.wrd=0x0, reg_off=0xf43061f8 | |
[ 10.945812] aal_l3qm_init_DQ_pools_pool0: sram_phy_start=0x8001e800 | |
[ 10.952049] aal_l3qm_init_DQ_pools_pool0: pool_id=1, bid_start=4595 | |
[ 10.958293] aal_l3qm_init_DQ_pools_pool0: cfg0_eq.wrd=0x8001e801, reg_off=0xf43061fc | |
[ 10.966033] aal_l3qm_init_DQ_pools_pool0: cfg1_eq.wrd=0x4b011f3, reg_off=0xf4306200 | |
[ 10.973681] aal_l3qm_init_DQ_pools_pool0: cfg2_eq.wrd=0xff01, reg_off=0xf4306204 | |
[ 10.981064] aal_l3qm_init_DQ_pools_pool0: cfg3_eq.wrd=0x10, reg_off=0xf4306208 | |
[ 10.988267] aal_l3qm_init_DQ_pools_pool0: cfg4_eq.wrd=0x0, reg_off=0xf430620c | |
[ 10.995399] aal_l3qm_init_DQ_pools_pool1: dram_phy_start=0x9000000 | |
[ 11.001567] aal_l3qm_init_DQ_pools_pool1: pool_id=2, bid_start=5795 | |
[ 11.007814] aal_l3qm_init_DQ_pools_pool1: cfg0_eq.wrd=0x9000001, reg_off=0xf4306210 | |
[ 11.015468] aal_l3qm_init_DQ_pools_pool1: cfg1_eq.wrd=0x295d16a3, reg_off=0xf4306214 | |
[ 11.023200] aal_l3qm_init_DQ_pools_pool1: cfg2_eq.wrd=0xff05, reg_off=0xf4306218 | |
[ 11.030577] aal_l3qm_init_DQ_pools_pool1: cfg3_eq.wrd=0x10, reg_off=0xf430621c | |
[ 11.037796] aal_l3qm_init_DQ_pools_pool1: cfg4_eq.wrd=0x0, reg_off=0xf4306220 | |
[ 11.044989] aal_l3qm_init_cpu_epp: EPP is 64-bit mode | |
[ 11.049964] ca_us_rate_manager_init: g_us_rate_manager_init_done=0 | |
[ 11.056138] ca_ni_init_module_probe: ca_init() is done successfully! | |
[ 11.062514] ca_ni_init_port_configs: port_cfg_infos[0].irq[0]=31 | |
[ 11.068467] ca_ni_init_port_configs: port_cfg_infos[1].irq[0]=32 | |
[ 11.074471] ca_ni_init_port_configs: port_cfg_infos[2].irq[0]=33 | |
[ 11.080454] ca_ni_init_port_configs: port_cfg_infos[3].irq[0]=34 | |
[ 11.086459] ca_ni_init_port_configs: port_cfg_infos[4].irq[0]=35 | |
[ 11.092456] ca_ni_init_port_configs: port_cfg_infos[5].irq[0]=36 | |
[ 11.098438] ca_ni_init_port_configs: port_cfg_infos[6].irq[0]=37 | |
[ 11.104443] ca_ni_init_port_configs: port_cfg_infos[7].irq[0]=38 | |
[ 11.110421] ca_ni_init_cpu_ports: ca_ni_num_intf=2 | |
[ 11.115259] ca_ni_init_cpu_ports: port_cfg_infos[0].irq[0]=31 | |
[ 11.120961] ca_ni_init_cpu_ports: port_cfg_infos[1].irq[0]=32 | |
[ 11.126666] ca_ni_dump_intfs: ===================== interface 0 =================== | |
[ 11.134323] ni_info_data.dev[i]=0x(____ptrval____), cep=0x(____ptrval____) | |
[ 11.141184] cpu_port[0]=0, port_cfg_infos[0].irq[0]=31 | |
[ 11.146300] port_id[0]=7 | |
[ 11.148821] MAC ADDR=00:13:25:00:00:01 | |
[ 11.152567] duplex=0x1, flowctrl=0x3, tx_ldpid=7 | |
[ 11.157161] ca_ni_dump_intfs: ===================== interface 1 =================== | |
[ 11.164815] ni_info_data.dev[i]=0x(____ptrval____), cep=0x(____ptrval____) | |
[ 11.171681] cpu_port[0]=1, port_cfg_infos[1].irq[0]=32 | |
[ 11.176795] port_id[0]=0 | |
[ 11.179314] port_id[1]=1 | |
[ 11.181851] port_id[2]=2 | |
[ 11.184353] port_id[3]=3 | |
[ 11.186874] port_id[4]=4 | |
[ 11.189392] port_id[5]=6 | |
[ 11.191924] MAC ADDR=00:13:25:00:00:02 | |
[ 11.195649] duplex=0x1, flowctrl=0x3, tx_ldpid=25 | |
[ 11.212249] ni fill QM eq buffer: eqid 4 cnt 768 | |
[ 11.217059] ni fill QM eq buffer: eqid 5 cnt 768 | |
[ 11.221879] ni fill QM eq buffer: eqid 6 cnt 2048 | |
[ 11.227378] ni fill QM eq buffer: eqid 7 cnt 768 | |
[ 11.232233] ca_ni_fill_eq_buf_pool: skb alloc data size 1536, headroom 128, end offset 1664, shared info size 320, push len 64, store skb offset 2040 | |
[ 11.245473] ca_ni_init_module_probe: ======= after CPU pool bid count=768 ======= | |
[ 11.252999] ca_ni_init_module_probe: QM refill req irq num = 43 44 45 46 | |
[ 11.259621] ca_ni_get_chip_revision: data.chip_revision=66 | |
[ 11.265104] ca_ni_dma_lso_init_startup_config: ca_ni_chip_revision=66 | |
[ 11.271538] ca_ni_dma_lso_init_startup_config: aal_scfg_read(CFG_ID_DMA_LSO_ACE_TEST), dma_lso_ace_test=1 | |
[ 11.281090] ca_ni_dma_lso_init_startup_config: aal_scfg_read(CFG_ID_NE_CA_TX_BY_START_XMIT), ca_tx_by_start_xmit=1 | |
[ 11.291429] ca_ni_dma_lso_init_startup_config: aal_scfg_read(CFG_ID_PON_VOQ_MODE), puc_voq_mode=0 | |
[ 11.300780] ca_ni_init_tx_dma_lso_interrupts: irq=132 | |
[ 11.305713] ca_ni_init_tx_dma_lso_interrupts: irq=133 | |
[ 11.310764] ca_ni_init_tx_dma_lso_interrupts: irq=134 | |
[ 11.315990] ============cep->port_cfg.irq[0] = 31 name = eth0 set smp_affinity to 0x2 | |
[ 11.323676] ============cep->port_cfg.irq[0] = 32 name = nas0 set smp_affinity to 0x2 | |
[ 11.333276] ca_l2fp_init for cpu 0x12 ~ 0x17 done! | |
[ 11.338685] eth0.2: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.344846] eth0.3: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.350991] eth0.4: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.357074] eth0.5: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.363219] eth0.6: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.369349] eth0.7: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.375490] eth0.8: CA NI, 00:00:01:00:02:00, IRQ 45315340 | |
[ 11.380971] eth0.2 -> port 0 | |
[ 11.383692] eth0.3 -> port 1 | |
[ 11.386559] eth0.4 -> port 2 | |
[ 11.389425] eth0.5 -> port 3 | |
[ 11.392309] eth0.6 -> port 6 | |
[ 11.395159] eth0.7 -> port 4 | |
[ 11.398026] eth0.8 -> port 5 | |
[ 11.400914] nas0 -> port 7 | |
[ 11.403587] eth0.2 -> port 0 | |
[ 11.406453] eth0.3 -> port 1 | |
[ 11.409320] eth0.4 -> port 2 | |
[ 11.412199] eth0.5 -> port 3 | |
[ 11.415054] eth0.6 -> port 6 | |
[ 11.417921] eth0.7 -> port 4 | |
[ 11.420808] eth0.8 -> port 5 | |
[ 11.423656] nas0 -> port 7 | |
[ 11.426396] nic_rxhook_init: init nic RX Hook functions. | |
[ 11.431756] nic_rxhook_init: nic_register_rxhook=(____ptrval____) | |
[ 11.437730] nic_rxhook_init: nic_unregister_rxhook=(____ptrval____) | |
[ 11.443999] [nic_hook_rx_register-52] nicRxHook=(____ptrval____) | |
[ 11.449981] [nic_unhook_rx_register-64] nicRxUnHook=(____ptrval____) | |
[ 11.456433] [nic_register_rxhook-178] portmask=fffffff, pri:0, rx=(____ptrval____) | |
[ 11.463897] first entry: 0, portmask 268435455, rx: (____ptrval____) | |
[ 11.470226] [nic_register_rxhook-178] portmask=fffffff, pri:9, rx=(____ptrval____) | |
[ 11.477796] insert here, priority: 9, portmask 268435455, rx: (____ptrval____) | |
[ 11.485021] [nic_register_rxfunc_all_port-3187] pfunc=(____ptrval____) ca_ni_num_intf=2 | |
[ 11.493000] [nic_register_rxfunc_by_port-3173] port =0, pfunc=(____ptrval____) | |
[ 11.500199] [nic_register_rxfunc_by_port-3173] port =1, pfunc=(____ptrval____) | |
[ 11.507421] nic_txhook_init: init nic TX Hook functions. | |
[ 11.512721] [nic_register_txfunc_default-3252] txfunc=(____ptrval____) | |
[ 11.519889] ca_ni_init_module: platform_driver_register() return ret=0 | |
rtkbosa: Don’t care pon mode, use general file | |
cat: can't open '/var/config/rtkbosa_k_checksum': No such file or directory | |
rtkbosa: checksumold = | |
rtkbosa: Use general file [/var/config/rtkbosa_k.bin] | |
[1;33;46mrtkbosa: Version 2.15 (Jan 14 2024 - 18:35:07)[m | |
rtkbosa: Detecting RTL8290B ... | |
rtkbosa: Error (0x10): The chip is not found | |
rtkbosa: Detecting UX3320_S ... | |
rtkbosa: Detecting UX3360 ... | |
rtkbosa: Detecting UX3361 ... | |
rtkbosa: Detecting Semtech Series (GN2xL9x) ... | |
rtkbo[ 12.357325] random: fast init done | |
sa: Detecting Semtech Bosa ID ... | |
[1;33;46mrtkbosa: SEMTECH GN25L95 is Found[m | |
[1;33;46mrtkbosa: none EEPROM exists.[m | |
rtkbosa: Starting Init GN25L95 ... | |
rtkbosa: Open file [/var/config/rtkbosa_k.bin] | |
rtkbosa: (0) Dump A0 (Disabled) | |
rtkbosa: (1) Dump LUTs4 Data | |
rtkbosa: (2) Dump LUTs5 Data | |
rtkbosa: (3) Dump LUTs6 Data | |
rtkbosa: (4) Dump A2.table2 | |
rtkbosa: (5) Dump all slope and offsets - A2_TABLE2 | |
rtkbosa: (6) Dump all alarms and warnings levels A2-Lower | |
rtkbosa: (7) Set PON_CONTROL | |
rtkbosa: (8) Enable all alarms and warnings | |
rtkbosa: Read reg (A2T1.249): c0 | |
rtkbosa: Write reg (A2T1.249): c0 | |
rtkbosa: Read reg (A2T1.253): c0 | |
rtkbosa: Write reg (A2T1.253): c0 | |
rtkbosa: (9) Soft TX disable reset | |
rtkbosa: Read Soft TX reg (A2T1.110): c2 | |
rtkbosa: Write Soft TX reg (A2T1.110): c2 | |
rtkbosa: Write Soft TX reg (A2T1.110): 82 | |
rtkbosa: (10) Set Safe Mode Start Up | |
rtkbosa: (11) Set up the password level | |
[1;33;46mrtkbosa: 8277B/9607DA(Get): A2/0xBB = 0x1c[m | |
[1;33;46mrtkbosa: 8277B/9607DA(Set): A2/0xBB = 0x1c[m | |
[1;33;46mrtkbosa: A2.T2/0xB1 = 0x0c[m | |
[1;33;46mrtkbosa: A2.T2/0xB7 = 0x41[m | |
rtkbosa: Init done ... | |
rtkbosa: [LD] Do NOT save A0 data for Semtech BOSA | |
[1;33;46mrtkbosa: done[m | |
diable printk= 0 parameter is 1 | |
/etc/init.d/rc3: line 7: /bin/checkomci: not found | |
default CFG_ID_PON_MAC_MODE of scfg is IGNORED(0xFF) ... | |
set RT PONMAC mode=0, speed=0 | |
rt_ponmisc init | |
RTK.0> command:set RT ponmisc burstPolarityReverse state disable | |
rt_[ 12.916052] __psds_burst_polarity_set: unknown PSDS mode:255 | |
ponmisc set burstPolarityReverse state disable | |
Error (0xffffffff): General Error | |
RTK.0> command:rt_ponmisc set mode 0 speed 0 | |
RTK.0> command:Loading modules: ca-ne ca-plat-kernel ca-sdk-cb libscfg [ 13.323191] [FCMGR] module init, detect 4 cpus online @rtk_fc_mgr_init(667) | |
[ 13.330471] fc_db.controlFuc.external_switch_en = 0 external_switch_port_offset = 0 | |
[ 13.338029] fc_db.controlFuc.mem_leak_debug = 0 fc_db.controlFuc.vlan_filtering = 0 | |
[ 13.345627] fc_db.controlFuc.special_fast_forward_mode = 0 fc_db.controlFuc.hwnat_customize = 0 fc_db.controlFuc.hwnat_customize_nptv6_sram_acc_v2 = 0 | |
[ 13.361139] dal_rtl8277c_gpio_ioremap_init 106: GPIO ioremap success!!! | |
[ 13.414711] IPG_CMPS_CFG REG: 0x5500 | |
[ 13.468417] FC mirror function is not ready! | |
[ 13.474398] [HWNAT] rtk_8277c_init: #####Set keep_lspid_unchange to 1##### @rtk_8277c_init(4220) | |
[ 13.483132] [HWNAT] rtk_8277c_init: #####Set wan_rxsel to 2##### @rtk_8277c_init(4227) | |
[ 13.491117] [HWNAT] rtk_8277c_init: #####Set wan_ind to 1##### @rtk_8277c_init(4239) | |
[ 13.498923] [HWNAT] rtk_8277c_init: #####Set stg0tbl[0]mac_da_match_en to 0##### @rtk_8277c_init(4248) | |
[ 13.508317] [HWNAT] rtk_8277c_init: #####Set stg0tbl[1]mac_da_match_en to 0##### @rtk_8277c_init(4248) | |
[ 13.517699] [HWNAT] rtk_8277c_init: #####Set stg0tbl[2]mac_da_match_en to 0##### @rtk_8277c_init(4248) | |
[ 13.527082] [HWNAT] rtk_8277c_init: #####Set stg0tbl[3]mac_da_match_en to 0##### @rtk_8277c_init(4248) | |
[ 13.573681] [HWNAT] rtk_8277c_acl_init: ##### L2/L3 CLS initialization success.##### @rtk_8277c_acl_init(4084) | |
[ 13.583668] [HWNAT] rtk_8277c_init: #####Disable L2FE/L3FE QoS Decision##### @rtk_8277c_init(4313) | |
[ 13.593655] [nic_register_rxfunc_by_port-3173] port =2, pfunc=(____ptrval____) | |
[ 13.600714] ca_ni_virtual_instance_open: cep->port_cfg.irq=33 | |
[ 13.606529] [HWNAT] Enable CPU port 0x12 @rtk_8277c_cpuport_init(3472) | |
[ 13.612989] [nic_register_rxfunc_by_port-3173] port =3, pfunc=(____ptrval____) | |
[ 13.620172] ca_ni_virtual_instance_open: cep->port_cfg.irq=34 | |
[ 13.626044] [HWNAT] Enable CPU port 0x13 @rtk_8277c_cpuport_init(3472) | |
[ 13.632448] [nic_register_rxfunc_by_port-3173] port =4, pfunc=(____ptrval____) | |
[ 13.639634] ca_ni_virtual_instance_open: cep->port_cfg.irq=35 | |
[ 13.645419] [HWNAT] Enable CPU port 0x14 @rtk_8277c_cpuport_init(3472) | |
[ 13.651899] [nic_register_rxfunc_by_port-3173] port =5, pfunc=(____ptrval____) | |
[ 13.659094] ca_ni_virtual_instance_open: cep->port_cfg.irq=36 | |
[ 13.664871] [HWNAT] Enable CPU port 0x15 @rtk_8277c_cpuport_init(3472) | |
[ 13.671367] [nic_register_rxfunc_by_port-3173] port =6, pfunc=(____ptrval____) | |
[ 13.678556] ca_ni_virtual_instance_open: cep->port_cfg.irq=37 | |
[ 13.684335] [HWNAT] Enable CPU port 0x16 @rtk_8277c_cpuport_init(3472) | |
[ 13.690821] [nic_register_rxfunc_by_port-3173] port =7, pfunc=(____ptrval____) | |
[ 13.698018] ca_ni_virtual_instance_open: cep->port_cfg.irq=38 | |
[ 13.703794] [HWNAT] Enable CPU port 0x17 @rtk_8277c_cpuport_init(3472) | |
[ 13.710267] [HWNAT] Init dmalso global config @rtk_8277c_dmalso_init(3498) | |
[ 13.717364] [HWNAT] Padding by DMAAFT rather than LSO @rtk_8277c_dmalso_init(3514) | |
[ 13.724881] Padding by DMAAFT rather than LSO | |
[ 13.729208] [HWNAT] Init Per CPU port VP header by-pass l2fe @rtk_8277c_dmalso_init(3517) | |
[ 13.737474] aal_ni_set_dma_lso_headerA: port_no=0, ldpid=0, febypass=1 | |
[ 13.743988] aal_ni_set_dma_lso_headerA: port_no=1, ldpid=0, febypass=1 | |
[ 13.750492] aal_ni_set_dma_lso_headerA: port_no=2, ldpid=0, febypass=1 | |
[ 13.757020] aal_ni_set_dma_lso_headerA: port_no=3, ldpid=0, febypass=1 | |
[ 13.763535] aal_ni_set_dma_lso_headerA: port_no=4, ldpid=0, febypass=1 | |
[ 13.770040] aal_ni_set_dma_lso_headerA: port_no=5, ldpid=0, febypass=1 | |
[ 13.776567] aal_ni_set_dma_lso_headerA: port_no=6, ldpid=0, febypass=1 | |
[ 13.783084] aal_ni_set_dma_lso_headerA: port_no=7, ldpid=0, febypass=1 | |
[ 13.789588] aal_ni_set_dma_lso_headerA: port_no=8, ldpid=0, febypass=1 | |
[ 13.796116] aal_ni_set_dma_lso_headerA: port_no=9, ldpid=0, febypass=1 | |
[ 13.802631] aal_ni_set_dma_lso_headerA: port_no=10, ldpid=0, febypass=1 | |
[ 13.809223] aal_ni_set_dma_lso_headerA: port_no=11, ldpid=0, febypass=1 | |
[ 13.815837] [HWNAT] Init DMALSO done @rtk_8277c_dmalso_init(3522) | |
[ 13.822018] [HWNAT] rtk_8277c_flow_init: ##### hash fib bits width: flow(type-0) act_mask 0x140000 (224 bits), type-1 act_mask 0x0 (0 bits), default act_mask 0xd0000 (80 bits) @rtk_8277c_flow_init(3861) | |
[ 13.840106] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 0 (RTK_8277C_FLOW_PROFILE_FLOW_5TUPLE), profile 0 hash_mask_idx = 0 @rtk_8277c_flow_hash_profile_init(3660) | |
[ 13.856691] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 1 (RTK_8277C_FLOW_PROFILE_FLOW_2TUPLE), profile 0 hash_mask_idx = 1 @rtk_8277c_flow_hash_profile_init(3696) | |
[ 13.873281] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 2 (RTK_8277C_FLOW_PROFILE_FLOW_MC), profile 0 hash_mask_idx = 2 @rtk_8277c_flow_hash_profile_init(3715) | |
[ 13.889523] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 2 (RTK_8277C_FLOW_PROFILE_FLOW_MC), profile 1 hash_mask_idx = 3 @rtk_8277c_flow_hash_profile_init(3740) | |
[ 13.905769] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 3 (RTK_8277C_FLOW_PROFILE_FLOW_5TUPLE_TCP_FLAG0), profile 0 hash_mask_idx = 4 @rtk_8277c_flow_hash_profile_init(3783) | |
[ 13.923233] [HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 4 (RTK_8277C_FLOW_PROFILE_DEFAULT_DROP), profile 0 hash_mask_idx = 5 @rtk_8277c_flow_hash_profile_init(3797) | |
[ 13.950837] set dev 0 L3FE_PP_SPKTP_DATA = 0x1c, l3specpkt_priority 56 | |
[ 13.957217] set dev 0 L3FE_PP_SPKTP_DATA = 0x1d, l3specpkt_priority 55 | |
[ 14.106748] RTK FleetConntrack Driver - core module init | |
[ 14.111932] - version: dev.0.0 (00000000) 0000-00-00-0000 | |
[ 14.117376] - mem usage 12675 KB (malloc:2985184 fc_db:9994216) | |
[ 14.123479] [nic_register_rxhook-178] portmask=3ffffff, pri:1, rx=(____ptrval____) | |
[ 14.131028] insert here, priority: 1, portmask 67108863, rx: (____ptrval____) | |
[ 14.138142] [nic_register_rxhook-178] portmask=3ffffff, pri:10, rx=(____ptrval____) | |
[ 14.145794] insert here, priority: 10, portmask 67108863, rx: (____ptrval____) | |
[ 14.153009] [nic_register_txfunc-3223] txfunc=(____ptrval____) | |
[ 14.158818] RTK FleetConntrack Driver - manager module init | |
[ 14.164393] - mem usage 179 KB (db:48088 nicrx_ipi:136192) | |
[ 14.426929] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
[ 14.441024] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
[ 15.936155] rtk_wifi6 0000:01:00.0: enabling device (0000 -> 0003) | |
[ 15.942345] [rtw_dev_probe] dev_probe_num:1 padapter:0x0000000000000000 dev_id:0 | |
[ 15.950561] PHL: Use chip layer register read functions! | |
[ 15.955740] PHL: [MAC] MAC_AX_MAJOR_VER = 0 | |
[ 15.955740] MAC_AX_PROTOTYPE_VER = 27 | |
[ 15.955740] MAC_AX_SUB_VER = 75 | |
[ 15.955740] MAC_AX_SUB_INDEX = 0 | |
[ 15.970291] PHL: [MAC] [ERR]Access efuse in suspend | |
[ 15.977147] PHL: [MAC] fv = 1 | |
[ 15.979966] dbg [rtw_hal_mac_init][1065]chip_cut = 1 | |
[ 15.989056] PHL: CH[0] Alloc 8192B RX buffer, got available size 16000B | |
[ 15.995809] PHL: CH[1] Alloc 192B RX buffer, got available size 640B | |
[ 16.003342] PHL: RP agg is 121 for 640. | |
[ 16.007409] PHL: hal_cfg_fw_8852c : fw_en 1. | |
[ 16.014275] PHL: [MAC] Clear all bd index done. | |
[ 16.018716] PHL: [MAC] Downloading Chip HW ID: 2 | |
[ 16.023263] PHL: [MAC] [FWDL] Query Internal FW Chip_ID = 0x2 | |
[ 16.028978] PHL: [MAC] [FWDL] Query Internal FW Cut = 0x1 | |
[ 16.034375] PHL: [MAC] [FWDL] Query Internal FW cat = 0x2 | |
[ 16.041926] PHL: [MAC] 0x0000/0x0000 | |
[ 16.080886] eric-tx CALL alloc_txring !!!! | |
[ 16.088768] swq tasklet init padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.095800] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.104221] eric-tx CALL alloc_txring !!!! | |
[ 16.108262] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.116540] eric-tx CALL alloc_txring !!!! | |
[ 16.120580] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.128873] eric-tx CALL alloc_txring !!!! | |
[ 16.132946] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.141232] eric-tx CALL alloc_txring !!!! | |
[ 16.145285] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.153531] eric-tx CALL alloc_txring !!!! | |
[ 16.157571] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.165873] eric-tx CALL alloc_txring !!!! | |
[ 16.169922] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.175709] dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
[ 16.181574] dbg [rtw_build_he_phy_caps][794]no RX stbc | |
[ 16.186767] dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
[ 16.192773] dbg [rtw_build_he_phy_caps][794]no RX stbc | |
[ 16.197972] dbg [rtw_cfg80211_init_wiphy][10875]enable A4 | |
[ 16.206591] rtk_wifi6 0001:01:00.0: enabling device (0000 -> 0003) | |
[ 16.212903] [rtw_dev_probe] dev_probe_num:2 padapter:0x0000000000000000 dev_id:1 | |
[ 16.221321] PHL: Use chip layer register read functions! | |
[ 16.226492] PHL: [MAC] MAC_AX_MAJOR_VER = 0 | |
[ 16.226492] MAC_AX_PROTOTYPE_VER = 27 | |
[ 16.226492] MAC_AX_SUB_VER = 75 | |
[ 16.226492] MAC_AX_SUB_INDEX = 0 | |
[ 16.241105] PHL: [MAC] [ERR]Access efuse in suspend | |
[ 16.247990] PHL: [MAC] fv = 0 | |
[ 16.250834] dbg [rtw_hal_mac_init][1065]chip_cut = 0 | |
[ 16.259469] PHL: CH[0] Alloc 3584B RX buffer, got available size 3712B | |
[ 16.266157] PHL: CH[1] Alloc 192B RX buffer, got available size 640B | |
[ 16.273733] PHL: RP agg is 121 for 640. | |
[ 16.277792] PHL: hal_cfg_fw_8192xb : fw_en 1. | |
[ 16.290287] PHL: [MAC] Clear all bd index done. | |
[ 16.294754] PHL: [MAC] Downloading Chip HW ID: 3 | |
[ 16.299257] PHL: [MAC] [FWDL] Query Internal FW Chip_ID = 0x3 | |
[ 16.305010] PHL: [MAC] [FWDL] Query Internal FW Cut = 0x0 | |
[ 16.310376] PHL: [MAC] [FWDL] Query Internal FW cat = 0x2 | |
[ 16.315833] PHL: [MAC] 0x0000/0x0000 | |
[ 16.357251] eric-tx CALL alloc_txring !!!! | |
[ 16.364257] swq tasklet init padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.371332] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.379723] eric-tx CALL alloc_txring !!!! | |
[ 16.383811] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.392037] eric-tx CALL alloc_txring !!!! | |
[ 16.396081] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.404366] eric-tx CALL alloc_txring !!!! | |
[ 16.408400] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.416698] eric-tx CALL alloc_txring !!!! | |
[ 16.420826] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.428952] eric-tx CALL alloc_txring !!!! | |
[ 16.433050] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.441294] eric-tx CALL alloc_txring !!!! | |
[ 16.445343] padapter=(____ptrval____) dvobj=(____ptrval____) | |
[ 16.451082] dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
[ 16.456924] dbg [rtw_build_he_phy_caps][794]no RX stbc | |
[ 16.462181] dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
[ 16.468131] dbg [rtw_build_he_phy_caps][794]no RX stbc | |
[ 16.473377] dbg [rtw_cfg80211_init_wiphy][10875]enable A4 | |
[ 16.511878] rtl8221b: rtk_rtl8221b_moudle_init | |
[ 16.516203] ca_pmx_request_gpio: offset:e reg_off:10 bit_off:e | |
[ 16.822043] rtl8221b: Phys init. will be done by extGphy | |
[ 16.827217] rtl8221b: Creat 3 proc entry. | |
[ 16.856405] extGphy: RTK External GPHY Module Init. | |
[ 16.861353] extGphy: rtk_ext_gphy_probe with .dts | |
[ 16.865892] extGphy: Number of Port/GPHY Mapping (.dts) = 1 | |
[ 16.871740] extGphy: read Ethernet PHY 7 IDs(0x1c 0xc849): phy_oui 0x732, phy_model 0x4 | |
[ 16.879583] extGphy: detect Eth PHY RTL8226B at PHY addr 7 | |
[ 16.885092] extGphy: Set port 4 as HiSGMII/SGMII (Default 1G) | |
[ 16.890870] extGphy: External GPHY List: | |
[ 16.894703] extGphy: #0 node (ffffff800cdcf780): [Port 4] [phyAddr 7] [ST C45] [RTL8226b] | |
[ 16.902874] extGphy: Total in the list: 1 | |
[ 16.906993] extGphy: Set port 6 as XFI (10G) | |
[ 16.907078] PHY chip: RTL8221B-VB (id= 0xc849), API version: 0x20 | |
[ 16.912144] loading serders file: /etc/serdes/p6_serdes_xfi_10g_B.txt , mode=4, rev=66 | |
[ 16.917281] [1;33;46mrtl8221b: Disable phy (addr7)[m | |
[ 16.929143] loading serders file: /etc/serdes/p6_serdes_xfi_10g.txt , mode=4 | |
[ 16.930342] [1;33;46mrtl8221b: Init PHY mac4 [unit0 addr7] Done[m | |
[ 16.943532] rtl8221b: default serdes mode: 1 | |
[ 16.952015] ca-sds: load p6 SerDes configuration from SerDes file OK | |
[ 17.388538] extGphy: Creat proc entry. | |
find: /lib/modules/users/: No such file or directory | |
Unix Socket Connect to server failed!!!: No such file or directory | |
Unable to open unix socket file /var/run/systemd.usock!!! | |
[ 18.024235] pf_rt_fc: unknown parameter 'pon_speed' ignored | |
[ 18.029966] ca-pon: load PON_VOQ_MODE: 0 | |
[ 18.033751] ca-pon: load BWMP_RSP_TM: 0x1543 | |
[ 18.037979] ca-pon: load ACTP_TOZ: 0x13880 | |
[ 18.042073] ca-pon: load ACTP_TO23: 0x3e8 | |
[ 18.046059] ca-pon: load ACTP_TO4: 0x3e8 | |
[ 18.049968] ca-pon: load ACTP_TO5: 0x3e8 | |
[ 18.053887] ca-pon: load CFG_ID_PON_LASER_ALIGN: 0x20. | |
[ 18.059013] ca-pon: init PON_RX_LOS_POLARITY_INVERT as 0. | |
[ 18.064486] ca-pon: init PON Tx laser polarity as 0 | |
[ 18.069344] ca-pon: init PON SerDes (mode: GPON, reversion B) | |
[ 18.177111] loading serders file: /etc/serdes/pon_serdes_gpon_B.txt , mode=3, rev=66 | |
[ 18.184774] loading serders file: /etc/serdes/pon_serdes_gpon.txt , mode=3 | |
[ 18.199900] ca-pon: load PON SerDes configuration from SerDes file successfully | |
[ 18.207153] __psds_disable_gpon_los_rst: EPON_GLB_SPARE_CFG:0x00000000 | |
[ 18.213660] __psds_disable_gpon_los_rst: EPON_GLB_SPARE_CFG:0x80000000 | |
[ 18.220167] __psds_disable_gpon_los_rst: EPON_GLB_SPARE_CFG:0x80000000 | |
[ 19.327971] INFO: PON SERDES Rx clock status = 0x5c01. | |
[ 19.332952] aal_psds_out_of_reset: Failed to do psds_sync | |
[ 19.439341] __psds_gbox_init rx_bit_order 1, tx_bit_order 1 | |
[ 19.445929] ca-pon: init PON SerDes OK | |
[ 19.449511] ca-pon: init GPON SERDES OK | |
[ 19.553437] ca-pon: init GPON global control OK | |
[ 19.557891] ca-pon: init gpon password OK | |
[ 19.562205] ca-pon: init GPON common OK | |
[ 19.565959] ca-pon: init GPON activation FSM OK | |
[ 19.570839] ca-pon: init PDC OK | |
[ 19.587880] ca-puc: initialization was done. | |
[ 19.591994] ca-pon: init GPON DATAPATH OK | |
[ 19.596021] ca-pon: init GPON kmsg OK | |
[ 19.599718] ca-pon: init GPON interrupt OK | |
[ 19.603817] aal_xgpon_dsfp_rxmac_ctrl_set(): invalid max_pkt_size 12288 | |
[ 19.610786] ca-pon: Init gpon workqueue OK. | |
[ 19.614834] ca-pon: IRQ 14 setup successfully. | |
[ 19.619319] ca-pon: init OK. | |
[ 19.622207] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[0].phyTcontId=1 | |
[ 19.629398] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[1].phyTcontId=2 | |
[ 19.636619] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[2].phyTcontId=3 | |
[ 19.643828] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[3].phyTcontId=4 | |
[ 19.651039] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[4].phyTcontId=5 | |
[ 19.658243] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[5].phyTcontId=6 | |
[ 19.665461] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[6].phyTcontId=7 | |
[ 19.672672] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[7].phyTcontId=8 | |
[ 19.679876] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[8].phyTcontId=9 | |
[ 19.687094] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[9].phyTcontId=10 | |
[ 19.694392] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[10].phyTcontId=11 | |
[ 19.701777] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[11].phyTcontId=12 | |
[ 19.709155] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[12].phyTcontId=13 | |
[ 19.716546] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[13].phyTcontId=14 | |
[ 19.723944] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[14].phyTcontId=15 | |
[ 19.731318] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[15].phyTcontId=21 | |
[ 19.738693] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[16].phyTcontId=23 | |
[ 19.746086] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[17].phyTcontId=24 | |
[ 19.753470] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[18].phyTcontId=25 | |
[ 19.760855] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[19].phyTcontId=26 | |
[ 19.768233] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[20].phyTcontId=27 | |
[ 19.775626] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[21].phyTcontId=28 | |
[ 19.783010] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[22].phyTcontId=29 | |
[ 19.790386] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[23].phyTcontId=30 | |
[ 19.797779] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[24].phyTcontId=31 | |
[ 19.805164] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[25].phyTcontId=16 | |
[ 19.812549] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[26].phyTcontId=17 | |
[ 19.819926] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[27].phyTcontId=18 | |
[ 19.827318] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[28].phyTcontId=19 | |
[ 19.834703] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[29].phyTcontId=20 | |
[ 19.842088] [rtl8277c]: _dal_rtl8277c_gpon_db_init 368 tcontId[30].phyTcontId=22 | |
[ 19.849757] omci platform db suc! | |
[ 19.852915] ponPort:7 cpuPort:16 rgmiiPort:-1 uniPortMask:0x1007f etherPortMask:0x7f | |
[ 19.860722] omci platform attached! | |
[ 19.864213] [nic_register_rxhook-178] portmask=ffffffff, pri:9, rx=(____ptrval____) | |
[ 19.871853] insert here, priority: 9, portmask -1, rx: (____ptrval____) | |
Loading TR-142 Module... | |
[ 20.020621] Realtek TR-142 Module initialized. | |
[ 20.075198] [rtk_tr142_nl_recv_msg] rtk_tr142_nl_pid = 1689 | |
[ 20.083709] Set mapping_outermost_vlan_by_mac_from_lut to 0 OK. | |
TR142_FEATURE_API_INIT_LIB ret = 0 | |
[rtk_tr142_debug_log_set] log_enable = 0 | |
tr142_app app_log_enable = 0 | |
running GPON mode ... | |
Loading Realtek IGMP/ MLD Snooping Module... | |
[ 20.279006] multicast_moudle_init | |
----- do_rc [/etc/init.d/rc10] ----- | |
/etc/init.d/rc10: line 2: can't create /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established: nonexistent directory | |
----- do_rc [/etc/init.d/rc14] ----- | |
----- do_rc [/etc/init.d/rc18] ----- | |
----- do_rc [/etc/init.d/rc20] ----- | |
----- do_rc [/etc/init.d/rc32] ----- | |
----- do_rc [/etc/init.d/rc34] ----- | |
Start rtk_ramonitor daemon! | |
run rcm voip script... | |
----- do_rc [/etc/init.d/rc35] ----- | |
ponmode PON_MODE=1 | |
argc 1, slicinitpower 1 | |
[setup_usock_thread:6769] Create new theread for usock | |
[setup_pushbtn_thread:6064] Create new theread for pushbtn | |
Input driver version is 1.0.1 | |
Input deca_pmx_request_gpio: offset:62 reg_off:1c bit_off:2 | |
vice ID: bus 0x19Pull low GPIO 98 | |
vendor 0x1 product 0x1 version 0x100 | |
Input device name: "gpio-keys" | |
Supported events: | |
Event type 0 (Sync) | |
Event type 1 (Key) | |
Event code 238 | |
Event code 408 | |
Event code 529 | |
Event type 20 (Repeat) | |
Grab succeeded, ungrabbing. | |
Watchdog ping rate set to 6 seconds. | |
Watchdog TickiReset value to -1 | |
ng Away! | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
Reset value to -1 | |
0 | |
Pull high GPIO 98 | |
Start SLIC init.... | |
Pull low GPIO 98 | |
WLAN0 Dispatch mode: 0, cpu: 0 | |
WLAN1 Dispatch mode: 0, cpu: 0 | |
[HWNAT] rtk_8277c_flow_init: ##### hash fib bits width: flow(type-0) act_mask 0x140000 (224 bits), type-1 act_mask 0x0 (0 bits), default act_mask 0xd0000 (80 bits) @rtk_8277c_flow_init(3861) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 0 (RTK_8277C_FLOW_PROFILE_FLOW_5TUPLE), profile 0 hash_mask_idx = 0 @rtk_8277c_flow_hash_profile_init(3660) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 1 (RTK_8277C_FLOW_PROFILE_FLOW_2TUPLE), profile 0 hash_mask_idx = 1 @rtk_8277c_flow_hash_profile_init(3696) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 2 (RTK_8277C_FLOW_PROFILE_FLOW_MC), profile 0 hash_mask_idx = 2 @rtk_8277c_flow_hash_profile_init(3715) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 2 (RTK_8277C_FLOW_PROFILE_FLOW_MC), profile 1 hash_mask_idx = 3 @rtk_8277c_flow_hash_profile_init(3740) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 3 (RTK_8277C_FLOW_PROFILE_FLOW_5TUPLE_TCP_FLAG0), profile 0 hash_mask_idx = 4 @rtk_8277c_flow_hash_profile_init(3783) | |
[HWNAT] rtk_8277c_flow_hash_profile_init: ##### init hash profile 4 (RTK_8277C_FLOW_PROFILE_DEFAULT_DROP), profile 0 hash_mask_idx = 5 @rtk_8277c_flow_hash_profile_init(3797) | |
Turn on phy power... | |
diable printk= 0 parameter is 0 | |
/etc/scripts/board_init.sh: line 5: can't create /sys/class/leds/LED_USB0/device_name: nonexistent directory | |
/etc/scripts/board_init.sh: line 6: can't create /sys/class/leds/LED_USB1/device_name: nonexistent directory | |
Pull high GPIO 98 | |
Start SLIC init.... | |
[1;31mRTK GLOBAL_GLOBAL_CONFIG: Power down offload1 cpu clock(PE1).[0m | |
[1;31mRTK GLOBAL_GLOBAL_CONFIG: Power down PCIE2 clock.[0m | |
init_spi_dev(index = 0) | |
[1;33mGLOBAL_PHY_CONTROL: 0x31c0112. cfg_xfi0_10g put into reset.[0m | |
init_spi_dev(spi_dev (____ptrval____)) | |
[1;33mGLOBAL_PHY_CONTROL: 0x31c0110. cfg_xfi1_10g put into reset.[0m | |
force_skip is 0 | |
[rtk_tr142_veip_get_transparent_ifIndex] ifIndex = 0 | |
4 cpu | |
CMD: /bin/sh -c /bin/echo 7 nas0 > /proc/eth_nic/dev_port_mapping | |
port 7 | |
assign to nas0 | |
mapping root DEV=eth0 virtual DEV=nas0 to port 7 | |
nas0 -> port 7 | |
mapping root DEV=nas0 virtual DEV=nas0 to port 7 | |
nas0 -> port 7 | |
CMD: /bin/sh -c echo 0x80 > /proc/fc/ctrl/wan_port_mask | |
CMD: /bin/smuxctl --if nas0 --set-if-rsmux --set-if-rx-policy DROP --set-if-tx-policy CONTINUE --set-if-rxmc-policy DROP --set-if-rx-multi 1 | |
sh (1912): drop_caches: 3 | |
CMD: /bin/sh -c echo auto_reserve_vlan 1 > proc/rtk_smuxdev/configure | |
Set auto_reserve_vlan to 1 OK. | |
------- 8277(B) VM Turning ---------------- | |
CMD: /bin/touch /var/wan_sockmark_file | |
CMD: /bin/ifconfig eth0.2ca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=0 | |
hw ether 4086cb7ca_ni_set_mac_address: i=1, cep->port_cfg.port_id[i]=1 | |
64b4d | |
ca_ni_set_mac_address: i=2, cep->port_cfg.port_id[i]=2 | |
ca_ni_set_mac_address: i=3, cep->port_cfg.port_id[i]=3 | |
ca_ni_set_mac_address: i=4, cep->port_cfg.port_id[i]=4 | |
ca_ni_set_mac_address: i=5, cep->port_cfg.port_id[i]=6 | |
CMD: /bin/ifconfig eth0.3 hw etheca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=0 | |
r 4086cb764b4d | |
ca_ni_set_mac_address: i=1, cep->port_cfg.port_id[i]=1 | |
ca_ni_set_mac_address: i=2, cep->port_cfg.port_id[i]=2 | |
starting pid 193ca_ni_set_mac_address: i=3, cep->port_cfg.port_id[i]=3 | |
0, tty '/dev/ttySca_ni_set_mac_address: i=4, cep->port_cfg.port_id[i]=4 | |
0': '/bin/login -ca_ni_set_mac_address: i=5, cep->port_cfg.port_id[i]=6 | |
p' | |
CMD: /bin/ifconfig eth0.4 hw etheca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=0 | |
r 4086cb764b4d | |
ca_ni_set_mac_address: i=1, cep->port_cfg.port_id[i]=1 | |
starting pid 193ca_ni_set_mac_address: i=2, cep->port_cfg.port_id[i]=2 | |
2, tty '': '/bin/ca_ni_set_mac_address: i=3, cep->port_cfg.port_id[i]=3 | |
inetd'ca_ni_set_mac_address: i=4, cep->port_cfg.port_id[i]=4 | |
ca_ni_set_mac_address: i=5, cep->port_cfg.port_id[i]=6 | |
CMD: /bin/ifconfig eth0.5 hw etheca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=0 | |
r 4086cb764b4d | |
ca_ni_set_mac_address: i=1, cep->port_cfg.port_id[i]=1 | |
ca_ni_set_mac_address: i=2, cep->port_cfg.port_id[i]=2 | |
ca_ni_set_mac_address: i=3, cep->port_cfg.port_id[i]=3 | |
ca_ni_set_mac_address: i=4, cep->port_cfg.port_id[i]=4 | |
ca_ni_set_mac_address: i=5, cep->port_cfg.port_id[i]=6 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 4e | |
CMD: /bin/ifconfig wlan0 hw ether 4086cb764b4e | |
CMD: /bin/ifconfig wlan0 mtu 1500 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 4f | |
CMD: /bin/ifconfig wlan0-vap0 hw ether 4086cb764b4f | |
service /bin/dropbear port 22 tcp enabled | |
service /bin/ftpd port 21 tcp enabled | |
service /bin/telnetd port 23 tcp enabled | |
service /bin/tftpd port 69 udp enabled | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan0-vapFW dl OK | |
0 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 50 | |
CMD: /bin/ifconfig wlan0-vap1 hw ether 4086cb764b50 | |
ifconfig: SIOCSIFHWADTAPI init OK | |
DR: No such device | |
CMD: /bin/ifconfig wlan0-vap1 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 51 | |
CMD: /bin/ifconfig wlan0-vap2 hw ether 4086cb764b51 | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan0-vap2 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 52 | |
CMD: /bin/ifconfig wlan0-vap3 hw ether 4086cb764b52 | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan0-vap3 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 53 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 54 | |
CMD: /bin/ifconfig wlan1 hw ether 4086cb764b54 | |
CMD: /bin/ifconfig wlan1 mtu 1500 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 55 | |
CMD: /bin/ifconfig wlan1-vap0 hw ether 4086cb764b55 | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan1-vap0 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 56 | |
CMD: /bin/ifconfig wlan1-vap1 hw ether 4086cb764b56 | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan1-vap1 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 57 | |
CMD: /bin/ifconfig wlan1-vap2 hw ether 4086cb764b57 | |
ifconfig: SIOCSIFHWADDR: No suchport 4 | |
device | |
CMD: assign to eth0.2 | |
/bin/ifconfig wlamapping root DEV=eth0 virtual DEV=eth0.2 to port 4 | |
n1-vap2 mtu 1500 eth0.2 -> port 4 | |
ifconfig: SIOCSmapping root DEV=nas0 virtual DEV=eth0.2 to port 4 | |
IFMTU: No such deeth0.2 -> port 4 | |
vice | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 58 | |
eth0.2 opened | |
CMD: /bin/ifconfig wlan1-vap3 hw ether 4086cb764b58 | |
ifconfig: SIOCSIFHWADDR: No such device | |
CMD: /bin/ifconfig wlan1-vap3 mtu 1500 | |
ifconfig: SIOCSIFMTU: No such device | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 59 | |
CMD: /bin/ifconfig eth0 up | |
CMD: /bin/ifconfig eth0 mtu 1500 | |
CMD: /bin/sh -c /bin/echo 4 eth0.2 > /proc/eth_nic/dev_port_mapping | |
CMD: /bin/sh -c echo eth0.2.0 4 >> /var/dev_port_mapping | |
CMD: /bin/ifconfig eth0.2 up | |
CMD: /bin/ifconfig eth0.2 mtu 1500 | |
login: CMD: /bin/smuxctl --if-create-name eth0.2 eth0.2.0 --set-if-rport 1 | |
smux | |
CMD: /bassign to eth0.3 | |
in/smuxctl --if emapping root DEV=eth0 virtual DEV=eth0.3 to port 1 | |
th0.2 --rx --tagsBBD dl OK | |
0 --set-rxif etheth0.3 -> port 1 | |
0.2.0 --rule-aliach0 line feed 2 OK | |
s eth0.2-rx-defaumapping root DEV=nas0 virtual DEV=eth0.3 to port 1 | |
lt --rule-append PCM IF CFG OK | |
CMD: /bin/sheth0.3 -> port 1 | |
-c /bin/echo 1 ech0 PCM CH CFG OK | |
th0.3 > /proc/ethch0 PCM CH enable OK | |
_nic/dev_port_mapping | |
CMD: /bi[32mInitialize Intel slic(0) dxs101 successfully | |
[0m | |
n/sh -c echo eth0eth0.3 opened | |
.3.0 1 >> /var/dev_port_mapping | |
CMD: /bin/ifconfig eth0.3 up | |
All DSP Software Ready. VoIP Defer Init done. | |
start watch dog | |
CMD: /bin/ifconfig eth0.3 mtu 1500 | |
CMD: /bin/smuxctl --if-create-name eth0port 2 | |
assign to eth0.4 | |
.3 eth0.3.0 --setmapping root DEV=eth0 virtual DEV=eth0.4 to port 2 | |
-if-rsmux | |
CMeth0.4 -> port 2 | |
D: /bin/smuxctl -mapping root DEV=nas0 virtual DEV=eth0.4 to port 2 | |
-if eth0.3 --rx -eth0.4 -> port 2 | |
-tags 0 --set-rxif eth0.3.0 --rule-alias eth0.3-rx-default --rule-appeneth0.4 opened | |
d | |
CMD: /bin/sh -c /bin/echo 2 eth0.4 > /proc/eth_nic/dev_port_mapping | |
launch /bin/VoIP_maserati at 21 | |
CMD: /bin/sh -c echo eth0.4.0 2 >> /var/dev_port_mapping | |
CMD: /bin/ifconfig eth0.4 up | |
CMD: /bin/ifconfig eth0.port 3 | |
4 mtu 1500 | |
Cassign to eth0.5 | |
MD: /bin/smuxctl mapping root DEV=eth0 virtual DEV=eth0.5 to port 3 | |
--if-create-name eth0.5 -> port 3 | |
eth0.4 eth0.4.0 -mapping root DEV=nas0 virtual DEV=eth0.5 to port 3 | |
-set-if-rsmux | |
eth0.5 -> port 3 | |
CMD: /bin/smuxctl --if eth0.4 --rx --tags 0 --set-rxif eth0.4.0 --ruleth0.5 opened | |
e-alias eth0.4-rx-default --rule-append | |
CMD: /bin/sh -c /bin/echo 3 eth0.5 > /proc/eth_nic/dev_port_mapping | |
CMD: /bin/sh -c echo eth0.5.0 3 >> /var/dev_port_mapping | |
CMD: /bin/ifconfig eth0.5 up | |
CMD: /bin/ifconfig eth0.5 mtu 1500 | |
CMD: /bin/smuxctl --if-create-name eth0.5 eth0.5.0 --set-if-rsmux | |
CMD: /bin/smuxctl --if eth0.5 --rx --tags 0 --set-rxif eth0.5.0 --rule-alias eth0.5-rx-default --rule-append | |
CMD: /bin/brctl addbr br0 | |
CMD: /bin/ifconfig br0 hw ether 4086cb764b4d | |
Cca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=7 | |
MD: /bin/ifconfig br0 mtu 1500 | |
CMD: /bin/ifconfig eth0 hw ether 4086cb764b4d | |
CMD: /bin/sh -c echo 1 > /proc/sys/net/ipv4/conf/br0/rp_filter | |
voip flash client share size = 9456 | |
waiting voip flash server start... (0) | |
CMD: /bin/brctl setfd br0 10 | |
[rtk_fc_stp_clean@3448]: ERROR! No such file or directory | |
[rtk_fc_stp_clean@3460]: ERROR! No such file or directory | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --rx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --tx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --rx --tags 1 --rule-remove-alias STP-Rule+ | |
4 cpu | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --tx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --rx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.3 --tx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --rx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --tx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --rx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --tx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --rx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.4 --tx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --rx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --tx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --rx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --tx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --rx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.5 --tx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.2 --rx --tags 0 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.2 --tx --tags 0 --rule-remove-alias STP-Rule+ | |
CMbr0: port 1(eth0.2.0) entered blocking state | |
D: /bin/sh -c /bibr0: port 1(eth0.2.0) entered disabled state | |
n/smuxctl --if etdevice eth0.2.0 entered promiscuous mode | |
h0.2 --rx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.2 --tx --tags 1 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.2 --rx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/sh -c /bin/smuxctl --if eth0.2 --tx --tags 2 --rule-remove-alias STP-Rule+ | |
CMD: /bin/brctl stp br0 off | |
CMD: /bin/brctl setageing br0 7200 | |
setupUniPortCapability:947 line is 0;2;2;2;2 | |
setupUniPortCapability:951 pch is 0 | |
setupUniPortCapability:975 pch is 0, port 0, UNI_PORT_NONE | |
setupUniPortCapability:951 pch is 2 | |
setupUniPortCapability:1032 pch is 2, port 1, UNI_PORT_GE | |
setupUniPortCapability:951 pch is 2 | |
setupUniPortCapability:1032 pch is 2, port 2, UNI_PORT_GE | |
setupUniPortCapability:951 pch is 2 | |
setupUniPortCapability:1032 pch is 2, port 3, UNI_PORT_GE | |
setupUniPortCapability:951 pch is 2 | |
CMD: /bin/ifconfig eth0.2.0 mtu 1500 | |
CMD: /bin/brctl addif br0 eth0.2.0 | |
CMD: /bin/ifconfig eth0.2.0 down | |
CMD: /bin/ifconfig eth0.2 down | |
waiting voip flash server start... (1) | |
waiting voip flash server start... (2) | |
waiting voip flash server start... (3) | |
rtl8221b: Add [/sys/class/leds/LED_8221B_P4_0] | |
rtl8221b: Add [/sys/class/leds/LED_8221B_P4_1] | |
rtl8221b: Add [/sys/class/leds/LED_8221B_P4_2] | |
eth0.2 closed | |
CMD: /bin/ifconrtl8221b: rtl8221b_led_probe(874) | |
fig eth0.2.0 up | |
CMD: /bin/ifcoeth0.2 opened | |
nfig eth0.2 up | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 10 > /sys/class/net/eth0.2.0/brport/path_cost | |
CMD: /bin/sh -c echo 10 > /sys/class/net/eth0.2.0/brport/path_cost | |
[sendMessageToLanNetInfo 20757]: get lannetinfo msgqueubr0: port 2(eth0.3.0) entered blocking state | |
e error! | |
[restarbr0: port 2(eth0.3.0) entered disabled state | |
t_ethernet@18065]device eth0.3.0 entered promiscuous mode | |
eth0.2.0 is up | |
getUniPortCapability:1227 line is 0;2;2;2;2 | |
getUniPortCapability:1234 pch is 2 | |
, port is 4 | |
CMD: /bin/ifconfig eth0.3.0 mtu 1500 | |
CMD: /bin/brctl addif br0 eth0.3.0 | |
CMD: /bin/ifconfig eth0.3.0 down | |
CMD: /bin/ifcoeth0.3 closed | |
nfig eth0.3 down | |
CMD: /bin/ifconfig eth0.3.0 up | |
CMD: /bin/ifconfig eth0.3 up | |
[seth0.3 opened | |
endMessageToLanNetInfo 20757]: get lannetinfo msgqueue error! | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 10 > /sys/class/net/eth0.3.0/brport/path_cost | |
CMD: /bin/sh -c echo 10 > /sys/class/net/eth0.3.0/brport/path_cost | |
[restart_ethernet@18065] eth0.3.0 is up | |
gebr0: port 3(eth0.4.0) entered blocking state | |
tUniPortCapabilitbr0: port 3(eth0.4.0) entered disabled state | |
y:1227 line is 0;2;2;2;2 | |
getUniPdevice eth0.4.0 entered promiscuous mode | |
ortCapability:1234 pch is 2, port is 1 | |
CMD: /bin/ifconfig eth0.4.0 mtu 1500 | |
CMD:eth0.4 closed | |
/bin/brctl addif br0 eth0.4.0 | |
Testing ... (interrupt to exit) | |
CMeth0.4 opened | |
D: /bin/ifconfig eth0.4.0 down | |
CMD: /bin/ifconfig eth0.4 down | |
/var/config/omci_ignore_mib_tbl.conf meClassId:255 | |
/var/config/omci_ignore_mib_tbl.conf subType:0 | |
/var/config/omci_ignore_mib_tbl.conf meClassId:247 | |
/var/config/omci_ignore_mib_tbl.conf subType:0 | |
/var/config/omci_ignore_mib_tbl.confbr0: port 4(eth0.5.0) entered blocking state | |
meClassId:65305 | |
br0: port 4(eth0.5.0) entered disabled state | |
/var/config/omcidevice eth0.5.0 entered promiscuous mode | |
_ignore_mib_tbl.conf subType:0 | |
/var/config/omci_ignore_mib_tbl.conf meeth0.5 closed | |
ClassId:65417 | |
/var/config/omci_ignore_mib_tbl.conf subType:0 | |
/var/config/omci_ignore_mieth0.5 opened | |
b_tbl.conf meClassId:65427 | |
/var/config/omci_ignore_mib_tbl.conf subType:0 | |
CMD: /bin/ifconfig eth0.4.0 up | |
<fMgmtInit:601> is the so is not a regular file. | |
<fMgmtInit:601> is the so is not a regular file. | |
<fMgmtInit:601> is the so is not a regular file. | |
CMD: /bin/ifconfig eth0.4 up | |
[sendMessageToLanNetInfo 20757]: get lannetinfo msgqueue error! | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 10 > /sys/class/net/eth0.4.0/brport/path_cost | |
CMD: /bin/sh -c echo 10 > /sys/class/net/eth0.4.0/brport/path_cost | |
[restart_ethernet@18065] eth0.4.0 is up | |
getUniPortCapability:1227 line is 0;2;2;2;2 | |
getUniPortCapability:1234 pch is 2, port is 2 | |
Module libomcivoip.so is loaded and inited | |
[libtr142][OMCI] == rtk_tr142.so is loaded == | |
[rtk_tr142_debug_log_set] log_enable = 0 | |
Module libtr142.so is loaded and inited | |
CMD: /bin/ifconfig eth0.5.0 mtu 1500 | |
CMD: /bin/brctl addif br0 eth0.5.0 | |
CMD: /bin/ifconfig eth0.5.0 down | |
CMD: /bin/ifconfig eth0.5 down | |
stat failed: /lib/features/internal/bdp_00000002.so | |
CMD: /bin/ifconfig eth0.5.0 up | |
CMD: /bin/ifconfig eth0.5 up | |
[sendMessageToLanNetInfo 20757]: get lannetinfo msgqueue error! | |
load moduleOptInitFunc | |
Module /lib/features/internal/bdp_00000080.so is inited | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 10 > /sys/class/net/eth0.5.0/brport/path_cost | |
CMD: /bin/sh -c echo 10 > /sys/class/net/eth0.5.0/brport/path_cost | |
[restart_ethernet@18065] eth0.5.0 is up | |
getUniPortCapability:1227 line is 0;2;2;2;2 | |
getUniPortCapability:1234 pch is 2, port is 3 | |
Module /lib/features/internal/rdp_00000004.so is inited | |
Module /lib/features/internal/me_00000100.so is inited | |
CMD: /bin/sh -c echo 4 > /proc/sys/net/ipv6/conf/br0/dad_transmits | |
CMD: /bin/ifconfig br0 up | |
CMD: /bin/ifconfig br0 192.168.0.1 netmask 255.255.255.0 mtu 1500 | |
Find ATM_VC_TBL interface br0 Fail! | |
[1;33;46m<subr_net.c 13967 set_ipv4_lan_policy_route> [mSet IPv4 LAN route for ifname (br0), table(260) | |
Auto Link-Local Address for br0 | |
load moduleOptInitFunc | |
Module /lib/features/internal/me_00020000.so is inited | |
startELan fail, plz check! | |
CMD: /bin/iptables -P FORWARD DROP | |
Module /lib/features/internal/me_00040000.so is inited | |
####################### voice_rtk_init_voip_cfg() ####################### | |
voip omci line state share size = 1400 | |
codec_suporrt_list 1279 | |
### voice_rtk_init_voip_cfg()###, pFlash=0x7fa03c5c40, g_pLineState=0x7fa07a5000 | |
CMD: /bin/ebtables -P FORWARD DROP | |
[startup] 4227376 set_all_port_powerdown_state | |
rt_port_phyPowerDown_set(4, 0) failed: set_all_port_pow[1;33;46mrtl8221b: Enable phy (addr7)[m | |
erdown_state 1346 | |
rt_port_phyPowerDown_set(5, 0) failed: set_all_port_powerdown_state 1346 | |
rt_port_phyPowerDown_set(6, 0) failed: set_all_port_powerdown_state 1346 | |
rt_port_phyPowerDown_set(7, 0) failed: set_all_port_powerdown_state 1346 | |
MIB chain descriptors checking (total 101) ok ! | |
[checkWanConfbyMode 2418]itfgroup=0x3ff7 | |
[checkWanConfbyMode 2418]itfgroup=0x8 | |
[checkWanConfbyMode 2418]itfgroup=0x0 | |
[checkWanConfbyMode 2418]itfgroup=0x0 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 4e | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+2 = 4f | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+3 = 50 | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+4 = 51 | |
CMD: /bin/mkdir -p /var/network | |
>>> Disable /dev/console XON XOFF !!! | |
CMD: /bin/slogd -n -s 51200 -w (null) ... | |
/bin/slogd -n -s 51200 -w (null) ... | |
CMD: /bin/ccom_linkkit a1On8L3dX1Q cloudProductSecret HkAQAAIoQVKHHXILWP0b d0116603f18efe6a0125cd1157f1dc7a Shanghai | |
Error ioctl in SIOCETHTEST errno=19(No such device) | |
Error ioctl in SIOCETHTEST errno=19(No such device) | |
Error ioctl in SIOCETHTEST errno=19(No such device) | |
Error ioctl in SIOCETHTEST errno=19(No such device) | |
sh: can't create /proc/driver/realtek/rtk_op_mode: nonexistent directory | |
CMD: /bin/spppd | |
waiting voip flash server init...) | |
drivers/net/ethernet/realtek/rtl86900/sdk/src/rtk/pon_led.c:1821 led sw blink init complete! | |
rtk_pon_led_SpecType_set 0 | |
CMD: /bin/sh -c /bin/ip rule add from all lookup 257 pref 27900 | |
CMD: /bin/sh -c /bin/ip rule add from all lookup 260 pref 28000 | |
CMD: /bin/sh -c /bin/ip -6 rule add from all lookup 257 pref 27900 | |
CMD: /bin/sh -c /bin/ip -6 rule add from all lookup 260 pref 28000 | |
CMD: /bin/sh -c /bin/ip -6 rule add from all lookup 259 pref 27950 | |
CMD: /bin/sh -c /bin/ip -6 rule add from all lookup 258 pref 27945 | |
[1;33;46m<subr_net.c 28429 startWan> [mstartWaca_ni_set_mac_address: i=0, cep->port_cfg.port_id[i]=0 | |
n Start all WAN | |
ca_ni_set_mac_address: i=1, cep->port_cfg.port_id[i]=1 | |
CMD: /bin/ifcoca_ni_set_mac_address: i=2, cep->port_cfg.port_id[i]=2 | |
nfig nas0 hw etheca_ni_set_mac_address: i=3, cep->port_cfg.port_id[i]=3 | |
r 4086cb764b4d | |
ca_ni_set_mac_address: i=4, cep->port_cfg.port_id[i]=4 | |
aiot kv read overca_ni_set_mac_address: i=5, cep->port_cfg.port_id[i]=6 | |
step | |
aiot kv read overstep | |
CMD: /bin/ifconfig nas0 up | |
CMD: /bin/ifconfig nas0 mtu 1500 | |
CMD: /bin/ethtool -K nas0 tso on | |
[prt] log level set as: [ 2 ] | |
[prt] success to establish udp, fd=4 | |
[prt] setsockopt | |
get default routeing ifname: No such device | |
[prt] sendto | |
[1;31m[err](27841) CoAPMessage_send(552): CoAP transport write failed, send message 1 return 0 | |
[0m[prt] sendto | |
[1;31m[err](27841) CoAPMessage_send(552): CoAP transport write failed, send message 2 return 0 | |
[0m................................. | |
PK : [redacted] | |
DN : [redacted] | |
DS : [redacted] | |
PID : Your company name | |
MID : Your module name | |
URL : https://iot-auth-global.aliyuncs.com/auth/bootstrap | |
SM : TLS + Guider | |
TS : [redacted] | |
................................. | |
[prt] Loading the CA root certificate ... | |
[prt] ok (0 skipped) | |
[prt] Connecting to /iot-auth-global.aliyuncs.com/443... | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[1], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/ifconfig nas0 mtu 1500 | |
CMD: /bin/sh -c /bin/smuxctl --if-create-name nas0 nas0_0 --set-if-rsmux --carrier MANUAL | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --rx --tags 1 --filter-vid 0x1f4 1 --pop-tag --rule-priority 900 --rule-alias nas0_0-rx-default-leaf --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --rx --tags 2 --filter-vid 0x1f4 2 --pop-tag --rule-priority 900 --rule-alias nas0_0-rx-default-leaf --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_0 --tx --tags 0 --push-tag --set-vid 0x1f4 1 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --tx --tags 0 --push-tag --set-vid 0x1f4 1 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_0 --tx --tags 1 --set-vid 0x1f4 1 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
CMD: /bin/sh -c /binbr0: port 5(nas0_1) entered blocking state | |
/smuxctl --if nasbr0: port 5(nas0_1) entered disabled state | |
0_0 --tx --tags 1device nas0_1 entered promiscuous mode | |
--set-vid 0x1f4 1 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_0 --tx --tags 2 --set-vid 0x1f4 2 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --tx --tags 2 --set-vid 0x1f4 2 --target ACCEPT --rule-alias nas0_0-tx-default --rule-append | |
CMD: /bin/ifconfig nas0_0 mtu 1500 | |
cmdStr: echo 65536 1 500 -1 3 -1 0 0 > /proc/rtk_tr142/wan_info | |
[setup_vlan_tagging_intf 2052]action=1, vlanTagGrp=0x0000. | |
CMD: /bin/ifconfig nas0_0 down | |
CMD: /bin/ifconfig nas0_0 down hw ether | |
CMD: /bin/ifconfig nas0_0 txqueuelen 10 | |
CMD: /bin/ifconfig nas0_0 up | |
CMD: /bin/mkdir -p /var/network/if-up.d | |
CMD: /bin/mkdir -p /var/network/if-down.d | |
[startConnection@26303] pEntry->ifIndex = 65536, pEntry->cmode = 2 | |
PPPoE | |
CMD: /bin/iptables -t nat -N address_map_tbl | |
CMD: /bin/ip6tables -t nat -N address_map_tbl | |
CMD: /bin/iptables -t nat -A address_map_tbl -o ppp0 -j MASQUERADE | |
[restart_upnp:21827] miniupnpd parameter error! (parameter=0, 1, 65536, 0, upnpItf=65535) | |
CMD: /bin/ifconfig nas0 mtu 1500 | |
CMD: /bin/sh -c /bin/smuxctl --if-create-name nas0 nas0_1 --set-if-rsmux --carrier MANUAL | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 1 --filter-vid 0x258 1 --pop-tag --rule-priority 900 --rule-alias nas0_1-rx-default-leaf --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 2 --filter-vid 0x258 2 --pop-tag --rule-priority 900 --rule-alias nas0_1-rx-default-leaf --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_1 --tx --tags 0 --push-tag --set-vid 0x258 1 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --tx --tags 0 --push-tag --set-vid 0x258 1 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_1 --tx --tags 1 --set-vid 0x258 1 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --tx --tags 1 --set-vid 0x258 1 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_1 --tx --tags 2 --set-vid 0x258 2 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --tx --tags 2 --set-vid 0x258 2 --target ACCEPT --rule-alias nas0_1-tx-default --rule-append | |
CMD: /bin/ifconfig nas0_1 mtu 1500 | |
cmdStr: echo 130817 1 600 -1 2 600 0 0 > /proc/rtk_tr142/wan_info | |
[setup_vlan_tagging_intf 2052]action=1, vlanTagGrp=0x0000. | |
CMD: /bin/ifconfig nas0_1 down | |
CMD: /bin/ifconfig nas0_1 down hw ether | |
CMD: /bin/ifconfig nas0_1 txqueuelen 10 | |
CMD: /bin/ifconfig nas0_1 up | |
[startConnection@26303] pEntry->ifIndex = 130817, pEntry->cmode = 0 | |
1483 bridged | |
CMD: /bin/brctl addif br0 nas0_1 | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 4 > /sys/class/net/nas0_1/brport/path_cost | |
CMD: /bin/sh -c echo 4 > /sys/class/net/nas0_1/brport/path_cost | |
CMD: /bin/ip rule del fwmark 0x4000/0x7e000 prohibit | |
RTNETLINK answers: No such file or directory | |
CMD: /bin/ip rule add fwmark 0x4000/0x7e000 pref 30000 prohibit | |
CMD: /bin/ip -6 rule del fwmark 0x4000/0x7e000 prohibit | |
RTNETLINK answers: No such file or directory | |
CMD: /bin/ip -6 rule add fwmark 0x4000/0x7e000 pref 30000 prohibit | |
sh: can't create /proc/br_igmpsnoop: nonexistent directory | |
sh: can't create /proc/br_igmpquery: nonexistent directory | |
sh: can't create /proc/br_mldsnoop: nonexistent directory | |
sh: can't create /proc/br_mldquery: nonexistent directory | |
Error send: 1 Operation not permitted gCtrlSocketFd:4 | |
omci_wrapper_getTransceiverStatus ioctl failed -1 | |
omci_GetTransceiverInfo 7727 : get vendor name fail | |
IGMP Snooping: enabled | |
MLD Snooping: enabled | |
CMD: /bin/ebtables -D br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/ebtables -F BR_IGMP_MLD_DROP | |
Chain 'BR_IGMP_MLD_DROP' doesn't exist. | |
CMD: /bin/ebtables -X BR_IGMP_MLD_DROP | |
Chain 'BR_IGMP_MLD_DROP' doesn't exist. | |
CMD: /bin/ebtables -N BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -P BR_IGMP_MLD_DROP RETURN | |
sched: RT throttling activated | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o eth+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o eth+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
Chain 'br_lan_forward' doesn't exist. | |
CMD: /bin/iptables -t nat -N address_map_tbl | |
iptables: Chain already exists. | |
CMD: /bin/ip6tables -t nat -N address_map_tbl | |
ip6tables: Chain already exists. | |
[restart_upnp:21827] miniupnpd parameter error! (parameter=0, 1, 130817, 0, upnpItf=65535) | |
CMD: /bin/ifconfig nas0 mtu 1500 | |
CMD: /bin/sh -c /bin/smuxctl --if-create-name nas0 nas0_2 --set-if-rsmux --carrier MANUAL | |
CMD: /bin/sh -c /bin/smuxctl --if-create-name nas0_2 nas0_2_br | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 0 --set-rxif nas0_2_br --target ACCEPT --rule-priority 100 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 0 --filter-unicast-mac 1 --set-rxif nas0_2 --target ACCEPT --rule-priority 101 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 0 --filter-dmac 010000000000 010000000000 --duplicate-forward --set-rxif nas0_2_br --target ACCEPT --rule-priority 102 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 1 --set-rxif nas0_2_br --target ACCEPT --rule-priority 100 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 1 --filter-unicast-mac 1 --set-rxif nas0_2 --target ACCEPT --rule-priority 101 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 1 --filter-dmac 010000000000 010000000000 --duplicate-forward --set-rxif nas0_2_br --target ACCEPT --rule-priority 102 --rule-alias ipoe_passth_nas0_2 --rule-append iptables: Bad rule (does a matching rule exist in that chain?). | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 2 --set-rxif nas0_2_br --target ACCEPT --rule-priority 100 --rule-alias ipoe_passth_nas0_2 --rule-append | |
do_restart_dnsrelay:4378 no delay dns | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 2 --filter-unicast-mac 1 --set-rxif nas0_2 --target ACCEPT --rule-priority 101 --rule-alias ipoe_passth_nas0_2 --rule-append | |
[fixUpDns4_auto:2057] buf =, strlen(buf)=0 | |
[add_dnsv4_dnsmasq:1607] dnsip = | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 2 --filter-br0: port 6(nas0_2_br) entered blocking state | |
dmac 010000000000br0: port 6(nas0_2_br) entered disabled state | |
010000000000 --ddevice nas0_2_br entered promiscuous mode | |
uplicate-forward random: dnsmasq: uninitialized urandom read (128 bytes read) | |
--set-rxif nas0_2random: dnsmasq: uninitialized urandom read (48 bytes read) | |
_br --target ACCEPT --rule-priority 102 --rule-alias ipoe_passth_nas0_2 --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 1 --filter-vid 0x190 1 --pop-tag --rule-priority 900 --rule-alias nas0_2-rx-default-leaf --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 2 --filter-vid 0x190 2 --pop-tag --rule-priority 900 --rule-alias nas0_2-rx-default-leaf --rule-append | |
[fixUpDns6_other:2434] dns_file=/var/resolv6.conf.ppp0 | |
[fixUpDns4_auto:2057] buf =, strlen(buf)=0 | |
[add_dnsv4_dnsmasq:1607] dnsip = | |
==> [addEthWANdev] /bin/smuxctl --if nas0_2 --tx --tags 0 --push-tag --set-vid 0x190 1 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --tx --tags 0 --push-tag --set-vid 0x190 1 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_2 --tx --tags 1 --set-vid 0x190 1 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --tx --tags 1 --set-vid 0x190 1 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
[fixUpDns4_auto:2057] buf =, strlen(buf)=0 | |
[add_dnsv4_dnsmasq:1607] dnsip = | |
==> [addEthWANdev] /bin/smuxctl --if nas0_2 --tx --tags 2 --set-vid 0x190 2 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --tx --tags 2 --set-vid 0x190 2 --target ACCEPT --rule-alias nas0_2-tx-default --rule-append | |
CMD: /bin/ifconfig nas0_2 mtu 1500 | |
CMD: /bin/ifconfig nas0_2_br up | |
[update_monitor_list_file:25271] process_name = dnsmasq, action = 0 | |
cmdStr: echo 130818 1 400 -1 2 -1 0 0 > /proc/rtk_tr142/wan_info | |
Open file /var/tmp/hosts failed ! | |
[setup_vlan_tagging_intf 2052]action=1, vlanTagGrp=0x0000. | |
CMD: /bin/ifconfig nas0_2 down | |
CMD: /bin/ifconfig nas0_2 down hw ether | |
CMD: /bin/ifconfig nas0_2 mtu 1500 | |
CMD: /bin/ifconfig nas0_2 txqueuelen 10 | |
CMD: /bin/ifconfig nas0_2 up | |
[startConnection@26303] pEntry->ifIndex = 130818, pEntry->cmode = 1 | |
1483 MER | |
CMD: /bin/brctl addif br0 nas0_2_br | |
[1;33;46m<subr_net.c 17983 setup_port_path_cost_for_bridge> [mtmp_cmd = echo 4 > /sys/class/net/nas0_2_br/brport/path_cost | |
CMD: /bin/sh -c echo 4 > /sys/class/net/nas0_2_br/brport/path_cost | |
CMD: /bin/iptables -t nat -N address_map_tbl | |
iptables: Chain already exists. | |
CMD: /bin/ip6tables -t nat -N address_map_tbl | |
[update_monitor_list_file:25271] process_name = dnsmasq, action = 1 | |
ip6tables: Chain already exists. | |
[restart_upnp:21827] miniupnpd parameter error! (parameter=0, 1, 130818, 0, upnpItf=65535) | |
CMD: /bin/ifconfig nas0 mtu 1500 | |
CMD: /bin/sh -c /bin/smuxctl --if-create-name nas0 nas0_3 --set-if-rsmux --carrier MANUAL | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --rx --tags 1 --filter-vid 0xd1 1 --pop-tag --rule-priority 900 --rule-alias nas0_3-rx-default-leaf --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --rx --tags 2 --filter-vid 0xd1 2 --pop-tag --rule-priority 900 --rule-alias nas0_3-rx-default-leaf --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_3 --tx --tags 0 --push-tag --set-vid 0xd1 1 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --tx --tags 0 --push-tag --set-vid 0xd1 1 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_3 --tx --tags 1 --set-vid 0xd1 1 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --tx --tags 1 --set-vid 0xd1 1 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
==> [addEthWANdev] /bin/smuxctl --if nas0_3 --tx --tags 2 --set-vid 0xd1 2 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --tx --tags 2 --set-vid 0xd1 2 --target ACCEPT --rule-alias nas0_3-tx-default --rule-append | |
CMD: /bin/ifconfig nas0_3 mtu 1500 | |
cmdStr: echo 130819 1 209 -1 1 -1 0 0 > /proc/rtk_tr142/wan_info | |
[setup_vlan_tagging_intf 2052]action=1, vlanTagGrp=0x0000. | |
CMD: /bin/ifconfig nas0_3 down | |
CMD: /bin/ifconfig nas0_3 down hw ether | |
CMD: /bin/ifconfig nas0_3 mtu 1500 | |
CMD: /bin/ifconfig nas0_3 txqueuelen 10 | |
CMD: /bin/ifconfig nas0_3 up | |
[startConnection@26303] pEntry->ifIndex = 130819, pEntry->cmode = 1 | |
1483 MER | |
CMD: /bin/iptables -t nat -N address_map_tbl | |
iptables: Chain already exists. | |
CMD: /bin/ip6tables -t nat -N address_map_tbl | |
ip6tables: Chain already exists. | |
[restart_upnp:21827] miniupnpd parameter error! (parameter=0, 1, 130819, 0, upnpItf=65535) | |
CMD: /bin/iptables -P INPUT DROP | |
CMD: /bin/iptables -N telnetopen | |
CMD: /bin/iptables -I INPUT -j telnetopen | |
CMD: /bin/iptables -F telnetopen | |
[LJP][ccom_restart_telnet][4488][MIB_TELNET_TEMPORARY_OPEN=0] | |
CMD: /bin/iptables -A FORWARD -p tcp -o ppp+ --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu | |
CMD: /bin/iptables -A FORWARD -p tcp -i ppp+ --tcp-flags SYN,RST SYN -m tcpmss --mss 1452:65495 -j TCPMSS --set-mss 1452 | |
CMD: /bin/ip6tables -A FORWARD -p tcp -o ppp+ --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu | |
CMD: /bin/ip6tables -A FORWARD -p tcp -i ppp+ --tcp-flags SYN,RST SYN -m tcpmss --mss 1432:65475 -j TCPMSS --set-mss 1432 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[2], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/iptables | |
Error send: 1 Operation not permitted gCtrlSocketFd:4 | |
-A | |
INPUT -p omci_wrapper_getTransceiverStatus ioctl failed -1 | |
udp omci_GetTransceiverInfo 7738 : get vendor PN fail | |
--dport 520 -j ACCEPT | |
CMD: /bin/iptables -A INPUT ! -i br+ -d 239.255.255.250 -j DROP | |
CMD: /bin/iptables -A INPUT -d 224.0.0.0/4 -j ACCEPT | |
CMD: /bin/iptables -A INPUT -i lo -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -i lo -j ACCEPT | |
CMD: /bin/iptables -N cwmp_aclblock | |
CMD: /bin/iptables -t mangle -N cwmp_aclblock | |
CMD: /bin/iptables -F cwmp_aclblock | |
CMD: /bin/iptables -t mangle -F cwmp_aclblock | |
CMD: /bin/iptables -t mangle -A cwmp_aclblock -i nas0_3 -p TCP --dport 8082 -j MARK --set-mark 0x400000/0x400000 | |
CMD: /bin/iptables -A INPUT -j cwmp_aclblock | |
CMD: /bin/iptables -t mangle -D PREROUTING -j cwmp_aclblock | |
CMD: /bin/iptables -t mangle -A PREROUTING -j cwmp_aclblock | |
CMD: /bin/ebtables -N br_lan_forward -P RETURN | |
CMD: /bin/ebtables -A FORWARD -j br_lan_forward | |
CMD: /bin/ebtables -D br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -F BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -X BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -N BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -P BR_IGMP_MLD_DROP RETURN | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o eth+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o eth+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -N br_wan | |
CMD: /bin/ebtables -P br_wan RETURN | |
CMD: /bin/ebtables -N br_wan_out | |
CMD: /bin/ebtables -P br_wan_out RETURN | |
CMD: /bin/ebtables -N br_lan_out | |
CMD: /bin/ebtables -P br_lan_out RETURN | |
CMD: /bin/ebtables -A br_wan -i nas0_1 -j DROP | |
CMD: /bin/ebtables -A br_wan_out -o nas0_1 -j DROP | |
CMD: /bin/ebtables -A br_wan -i nas0_2_br -j DROP | |
CMD: /bin/ebtables -A br_wan_out -o nas0_2_br -j DROP | |
CMD: /bin/ebtables -A INPUT -j br_wan | |
CMD: /bin/ebtables -A OUTPUT -j br_wan_out | |
CMD: /bin/ebtables -A OUTPUT -j br_lan_out | |
CMD: /bin/ebtables -N br_wan_forward | |
CMD: /bin/ebtables -P br_wan_forward RETURN | |
[block_br_wan_forward:3434] Entry.cmode =2, Entry.IpProtocol=3 | |
[block_br_wan_forward:3434] Entry.cmode =0, Entry.IpProtocol=3 | |
CMD: /bin/ebtables -A br_wan_forward -i nas0_1 -o nas0+ -j DROP | |
[block_br_wan_forward:3434] Entry.cmode =1, Entry.IpProtocol=1 | |
[block_br_wan_forward:3434] Entry.cmode =1, Entry.IpProtocol=1 | |
CMD: /bin/ebtables -A FORWARD -j br_wan_forward | |
CMD: /bin/iptables -D INPUT -j voip_chain | |
iptables v1.4.18: Couldn't load target `voip_chain':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -F voip_chain | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X voip_chain | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -N voip_chain | |
CMD: /bin/iptables -I INPUT -j voip_chain | |
CMD: /bin/iptables -I voip_chain -i nas0_2 -p UDP --dport 5060 -j ACCEPT | |
CMD: /bin/iptables -I voip_chain -i nas0_2 -p UDP --dport 9000:9003 -j ACCEPT | |
CMD: /bin/iptables -I voip_chain -i nas0_2 -p UDP --dport 9000 -j ACCEPT | |
CMD: /bin/iptables -I voip_chain -i nas0_2 -p UDP --dport 2944 -j ACCEPT | |
CMD: /bin/ebtables -N wlan_block -P RETURN | |
CMD: /bin/ebtables -A FORWARD -j wlan_block | |
CMD: /bin/ebtables -N lan_port_isolation | |
CMD: /bin/ebtables -P lan_port_isolation RETURN | |
CMD: /bin/ebtables -A FORWARD -j lan_port_isolation | |
CMD: /bin/ebtables -N br_pppoe | |
CMD: /bin/ebtables -P br_pppoe RETURN | |
CMD: /bin/ebtables -N br_pppoe_acl | |
CMD: /bin/ebtables -P br_pppoe_acl DROP | |
CMD: /bin/ebtables -A FORWARD -j br_pppoe | |
CMD: /bin/ebtables -A br_pppoe_acl --proto 0x8100 --vlan-encap 0x8863 -j RETURN | |
CMD: /bin/ebtables -A br_pppoe_acl --proto 0x8100 --vlan-encap 0x8864 -j RETURN | |
CMD: /bin/ebtables -A br_pppoe_acl --proto 0x8863 -j RETURN | |
CMD: /bin/ebtables -A br_pppoe_acl --proto 0x8864 -j RETURN | |
CMD: /bin/ebtables -A br_pppoe_acl -p IPv4 -d 01:00:5e:00:00:00/ff:ff:ff:00:00:00 -j RETURN | |
CMD: /bin/ebtables -A br_pppoe_acl -p IPv6 -d 33:33:00:00:00:00/ff:ff:00:00:00:00 -j RETURN | |
CMD: /bin/iptables -N domainblk | |
CMD: /bin/iptables -t mangle -N mark_for_domainBLK | |
CMD: /bin/iptables -t mangle -I PREROUTING -j mark_for_domainBLK | |
CMD: /bin/ip6tables -N domainblk | |
CMD: /bin/iptables -A domainblk -p udp --dport 53 -m dns --qname example.com --rmatch -j DROP | |
CMD: /bin/ip6tables -D domainblk -p udp --dport 53 -m dns --qname example.com --rmatch -j DROP | |
ip6tables: Bad rule (does a matching rule exist in that chain?). | |
CMD: /bin/ip6tables -A domainblk -p udp --dport 53 -m dns --qname example.com --rmatch -j DROP | |
CMD: /bin/iptables -A domainblk -p udp --dport 53 -m dns --qname wpad.domain.name --rmatch -j DROP | |
CMD: /bin/ip6tables -D FORWARD -p udp --dport 53 -m dns --qname wpad.domain.name --rmatch -j DROP | |
ip6tables: Bad rule (does a matching rule exist in that chain?). | |
CMD: /bin/ip6tables -A FORWARD -p udp --dport 53 -m dns --qname wpad.domain.name --rmatch -j DROP | |
CMD: /bin/iptables -A INPUT -j domainblk | |
CMD: /bin/iptables -A FORWARD -j domainblk | |
CMD: /bin/iptables -A OUTPUT -j domainblk | |
CMD: /bin/ip6tables -A INPUT -j domainblk | |
CMD: /bin/ip6tables -A FORWARD -j domainblk | |
CMD: /bin/ip6tables -A OUTPUT -j domainblk | |
CMD: /bin/iptables -N ntpblk | |
CMD: /bin/iptables -A OUTPUT -j ntpblk | |
CMD: /bin/iptables -N tr069 | |
CMD: /bin/iptables -A INPUT -j tr069 | |
CMD: /bin/ip6tables -N ipv6_tr069 | |
CMD: /bin/ip6tables -A INPUT -j ipv6_tr069 | |
CMD: /bin/iptables -F tr069 | |
CMD: /bin/ip6tables -F ipv6_tr069 | |
CMD: /bin/iptables -A tr069 ! -i nas0_3 -p tcp --dport 8082 -j DROP | |
CMD: /bin/ip6tables -A ipv6_tr069 ! -i nas0_3 -p TCP --dport 8082 -j DROP | |
CMD: /bin/ip6tables -A ipv6_tr069 -i nas0_3 -p TCP --dport 8082 -j ACCEPT | |
CMD: /bin/iptables -t mangle -F interface_grouping_br0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t mangle -D PREROUTING -i br0 -j interface_grouping_br0 | |
iptables v1.4.18: Couldn't load target `interface_grouping_br0':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t mangle -X interface_grouping_br0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -N inacc | |
CMD: /bin/iptables -A inacc ! -i br0 -m mark --mark 0x400000/0x400000 -j ACCEPT | |
CMD: /bin/ip6tables -N inacc | |
Open file /var/run/dhcpcV6.leases.ppp0 fail ! | |
CMD: /bin/iptables -t mangle -I PREROUTING ! -i br0 -p TCP --dport 8082 -j MARK --set-mark 0x400000/0x400000 | |
CMD: /bin/iptables -I inacc -i br0 -p TCP --dport 23 -j DROP | |
CMD: /bin/ip6tables -I inacc -i br0 -p TCP --dport 23 -j DROP | |
CMD: /bin/iptables -I inacc -i br0 -p TCP --dport 21 -j DROP | |
unlink /var/interface/uptime/nas0_1 | |
CMD: /bin/ip6tables -I inacc -i br0 -p TCP --dport 21 -j DROP | |
CMD: /bin/iptables -I inacc -i br0 -p UDP --dport 69 -j DROP | |
CMD: /bin/ip6tables -I inacc -i br0 -p UDP --dport 69 -j DROP | |
CMD: /bin/ip6tables -I inacc -i br0 -p TCP --dport 80 -j DROP | |
CMD: /bin/iptables -I inacc -i br0 -p UDP --dport 161:162 -j DROP | |
CMD: /bin/ip6tables -I inacc -i br0 -p UDP --dport 161:162 -j DROP | |
CMD: /bin/iptables -I inacc -i br0 -p TCP --dport 22 -j DROP | |
unlink /var/interface/uptime/nas0_2 | |
CMD: /bin/ip6tables -I inacc -i br0 -p TCP --dport 22 -j DROP | |
CMD: /bin/ip6tables -I inacc -i br0 -p TCP --dport 22 -j DROP | |
RTNETLINK answers: No such process | |
CMD: /bin/iptables -I inacc ! -i br0 -p ICMP --icmp-type echo-request -j DROP | |
CMD: /bin/iptables -A INPUT -j inacc | |
CMD: /bin/ip6tables -A INPUT -j inacc | |
CMD: /bin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT | |
unlink /var/interface/uptime/nas0_3 | |
CMD: /bin/iptables -N dhcp_port_filter | |
CMD: /bin/iptables -A INPUT -j dhcp_port_filter | |
RTNETLINK answers: No such process | |
CMD: /bin/iptables -A INPUT -i lo -j ACCEPT | |
CMD: /bin/iptables -t mangle -D PREROUTING -j dscp_remark_pre | |
CMD: /bin/iptables -t mangle -F dscp_remark_pre | |
CMD: /bin/iptables -t mangle -X dscp_remark_pre | |
CMD: /bin/ip6tables -t mangle -D PREROUTING -j dscp_remark_pre | |
CMD: /bin/ip6tables -t mangle -F dscp_remark_pre | |
CMD: /bin/ip6tables -t mangle -X dscp_remark_pre | |
CMD: /bin/iptables -t mangle -N dscp_remark_pre | |
CMD: /bin/iptables -t mangle -A dscp_remark_pre -j CONNMARK2 --restore-mark2 --mask2 0x1fff800000 | |
CMD: /bin/iptables -t mangle -A PREROUTING -j dscp_remark_pre | |
CMD: /bin/ip6tables -t mangle -N dscp_remark_pre | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_pre -j CONNMARK2 --restore-mark2 --mask2 0x1fff800000 | |
CMD: /bin/ip6tables -t mangle -A PREROUTING -j dscp_remark_pre | |
CMD: /bin/iptables -t nat -N address_map_tbl | |
iptables: Chain already exists. | |
CMD: /bin/iptables -t nat -A POSTROUTING -j address_map_tbl | |
CMD: /bin/ip6tables -t nat -N address_map_tbl | |
ip6tables: Chain already exists. | |
CMD: /bin/ip6tables -t nat -A POSTROUTING -j address_map_tbl | |
CMD: /bin/iptables -t mangle -N voip_remarking | |
CMD: /bin/iptables -t mangle -A POSTROUTING -p udp -j voip_remarking | |
CMD: /bin/ip6tables -t mangle -N voip_remarking | |
CMD: /bin/ip6tables -t mangle -A POSTROUTING -p udp -j voip_remarking | |
CMD: /bin/iptables -N urlblock | |
CMD: /bin/iptables -A FORWARD -i br+ -p tcp --tcp-flags SYN,FIN,RST NONE -m length ! --length 0:84 -j urlblock | |
CMD: /bin/ip6tables -N urlblock | |
CMD: /bin/ip6tables -A FORWARD -i br+ -p tcp --tcp-flags SYN,FIN,RST NONE -m length ! --length 0:104 -j urlblock | |
CMD: /bin/iptables -t mangle -N urlblock_pre | |
CMD: /bin/iptables -t mangle -A PREROUTING -i br+ -p tcp -j urlblock_pre | |
CMD: /bin/iptables -t mangle -N urlblock_post | |
CMD: /bin/iptables -t mangle -A POSTROUTING ! -o br+ -p tcp -j urlblock_post | |
CMD: /bin/ip6tables -t mangle -N urlblock_pre | |
CMD: /bin/ip6tables -t mangle -A PREROUTING -i br+ -p tcp -j urlblock_pre | |
CMD: /bin/ip6tables -t mangle -N urlblock_post | |
CMD: /bin/ip6tables -t mangle -A POSTROUTING ! -o br+ -p tcp -j urlblock_post | |
CMD: /bin/iptables -F urlblock | |
CMD: /bin/iptables -t mangle -F urlblock_post | |
CMD: /bin/iptables -t mangle -F urlblock_pre | |
CMD: /bin/ip6tables -F urlblock | |
CMD: /bin/ip6tables -t mangle -F urlblock_post | |
CMD: /bin/ip6tables -t mangle -F urlblock_pre | |
CMD: /bin/sh -c /bin/ipset flush urlblk_port_filter | |
Error send: 1 Operation not permitted gCtrlSocketFd:4 | |
omci_wrapper_getTransceiverStatus ioctl failed -1 | |
omci_GetTransceiverInfo 7748 : get vendor SN fail | |
ipset v7.5: The set with the given name does not exist | |
CMD: /bin/sh -c /bin/ipset destroy urlblk_port_filter | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[3], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
ipset v7.5: The set with the given name does not exist | |
CMD: /bin/sh -c /bin/ipset create urlblk_port_filter bitmap:port range 1-65535 | |
CMD: /bin/sh -c /bin/ipset flush urlblk_mac_filter | |
ipset v7.5: The set with the given name does not exist | |
CMD: /bin/sh -c /bin/ipset destroy urlblk_mac_filter | |
ipset v7.5: The set with the given name does not exist | |
CMD: /bin/sh -c /bin/ipset create urlblk_mac_filter hash:mac counters | |
CMD: /bin/iptables -F urlblock_black | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X urlblock_black | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -N urlblock_black | |
CMD: /bin/iptables -F urlblock_white | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X urlblock_white | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -N urlblock_white | |
CMD: /bin/ip6tables -F urlblock_black | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X urlblock_black | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -N urlblock_black | |
CMD: /bin/ip6tables -F urlblock_white | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X urlblock_white | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -N urlblock_white | |
CMD: /bin/iptables -F URLBLK_ACT_REJECT_LOG | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X URLBLK_ACT_REJECT_LOG | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -F URLBLK_ACT_REJECT_LOG | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X URLBLK_ACT_REJECT_LOG | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/iptables -F URLBLK_ACT_REJECT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X URLBLK_ACT_REJECT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -F URLBLK_ACT_REJECT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X URLBLK_ACT_REJECT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/iptables -F URLBLK_ACT_ACCEPT_LOG | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X URLBLK_ACT_ACCEPT_LOG | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -F URLBLK_ACT_ACCEPT_LOG | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X URLBLK_ACT_ACCEPT_LOG | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/iptables -F URLBLK_ACT_ACCEPT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -X URLBLK_ACT_ACCEPT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -F URLBLK_ACT_ACCEPT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -X URLBLK_ACT_ACCEPT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/iptables -N portfw | |
CMD: /bin/iptables -A FORWARD -j portfw | |
CMD: /bin/iptables -t nat -N portfw | |
CMD: /bin/iptables -t nat -A PREROUTING -j portfw | |
CMD: /bin/iptables -t nat -N portfwPreNatLB | |
CMD: /bin/iptables -t nat -A PREROUTING -j portfwPreNatLB | |
CMD: /bin/iptables -t nat -N portfwPostNatLB | |
CMD: /bin/iptables -t nat -A POSTROUTING -j portfwPostNatLB | |
CMD: /bin/iptables -F portfw | |
CMD: /bin/iptables -t nat -F portfw | |
CMD: /bin/iptables -t nat -F portfwPreNatLB | |
CMD: /bin/iptables -t nat -F portfwPostNatLB | |
CMD: /bin/iptables -t nat -F portfwPreNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j portfwPreNatLB_ppp0 | |
iptables v1.4.18: Couldn't load target `portfwPreNatLB_ppp0':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPreNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F portfwPostNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j portfwPostNatLB_ppp0 | |
iptables v1.4.18: Couldn't load target `portfwPostNatLB_ppp0':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPostNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F portfwPreNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j portfwPreNatLB_nas0_2 | |
iptables v1.4.18: Couldn't load target `portfwPreNatLB_nas0_2':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPreNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F portfwPostNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j portfwPostNatLB_nas0_2 | |
iptables v1.4.18: Couldn't load target `portfwPostNatLB_nas0_2':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPostNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F portfwPreNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j portfwPreNatLB_nas0_3 | |
iptables v1.4.18: Couldn't load target `portfwPreNatLB_nas0_3':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPreNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F portfwPostNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j portfwPostNatLB_nas0_3 | |
iptables v1.4.18: Couldn't load target `portfwPostNatLB_nas0_3':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X portfwPostNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -A portfw ! -i br0 -m mark --mark 0x400000/0x400000 -j RETURN | |
CMD: /bin/iptables -N ipfilter | |
CMD: /bin/iptables -A FORWARD -j ipfilter | |
CMD: /bin/iptables -F ipfilter | |
CMD: /bin/iptables -A ipfilter -i nas+ ! -o br+ -j DROP | |
CMD: /bin/iptables -A ipfilter -i ppp+ ! -o br+ -j DROP | |
CMD: /bin/iptables -A ipfilter -d 224.0.0.0/4 -j RETURN | |
CMD: /bin/iptables -A ipfilter -m state --state ESTABLISHED,RELATED -j RETURN | |
CMD: /bin/ethctl conntrack killall | |
Error ioctl in ethctl Operation not supported 95 | |
CMD: /bin/iptables -t nat -N dmzPreNatLB | |
CMD: /bin/iptables -t nat -A PREROUTING -j dmzPreNatLB | |
CMD: /bin/iptables -t nat -N dmzPostNatLB | |
CMD: /bin/iptables -t nat -A POSTROUTING -j dmzPostNatLB | |
CMD: /bin/iptables -N dmz | |
CMD: /bin/iptables -t nat -N dmz | |
CMD: /bin/iptables -F dmz | |
CMD: /bin/iptables -t nat -F dmz | |
CMD: /bin/iptables -t nat -F dmzPreNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j dmzPreNatLB_ppp0 | |
iptables v1.4.18: Couldn't load target `dmzPreNatLB_ppp0':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPreNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPostNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j dmzPostNatLB_ppp0 | |
iptables v1.4.18: Couldn't load target `dmzPostNatLB_ppp0':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPostNatLB_ppp0 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPreNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j dmzPreNatLB_nas0_2 | |
iptables v1.4.18: Couldn't load target `dmzPreNatLB_nas0_2':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPreNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPostNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j dmzPostNatLB_nas0_2 | |
iptables v1.4.18: Couldn't load target `dmzPostNatLB_nas0_2':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPostNatLB_nas0_2 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPreNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D PREROUTING -j dmzPreNatLB_nas0_3 | |
omci_wrapper_msgHandler: devMode 1,receiveState 1,usrLogLvl 1, drvLogLvl 1,sn DLKICvKM | |
iptables v1.4.18: Couldn't load target `dmzPreNatLB_nas0_3':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPreNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPostNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -D POSTROUTING -j dmzPostNatLB_nas0_3 | |
iptables v1.4.18: Couldn't load target `dmzPostNatLB_nas0_3':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t nat -X dmzPostNatLB_nas0_3 | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t nat -F dmzPreNatLB | |
CMD: /bin/iptables -t nat -F dmzPostNatLB | |
CMD: /bin/modprobe -r nf_nat_ftp | |
CMD: /bin/iptables -A ipfilter -j dmz | |
CMD: /bin/iptables -t nat -A PREROUTING -j dmz | |
CMD: /bin/iptables -A ipfilter -i eth+ -j RETURN | |
CMD: /bin/iptables -A ipfilter -i wlan+ -j RETURN | |
CMD: /bin/iptables -A ipfilter ! -i br+ -j DROP | |
CMD: /bin/ebtables -N macfilter_forward | |
CMD: /bin/ebtables -N macfilter_local_in | |
CMD: /bin/ebtables -N macfilter_local_out | |
CMD: /bin/ebtables -t nat -N macfilter_mc | |
CMD: /bin/ebtables -t nat -P macfilter_mc RETURN | |
CMD: /bin/ebtables -F macfilter_forward | |
CMD: /bin/ebtables -F macfilter_local_in | |
CMD: /bin/ebtables -F macfilter_local_out | |
CMD: /bin/iptables -F macfilter_forward | |
Ignore classId:65417 | |
MIB_Table_Init Init mib table:mib_ExtendedIpHostCfgData_65417.so fail, error code is:1... | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ebtables -P macfilter_forward RETURN | |
CMD: /bin/ebtables -P macfilter_local_in RETURN | |
CMD: /bin/ebtables -P macfilter_local_out RETURN | |
Ignore classId:287 | |
MIB_Table_Init Init mib table:mib_ExtendedOnuGZTE.so fail, error code is:1... | |
/bin/ebtables -P macfilter_forward RETURN | |
CMD: /bin/echo 2 > /proc/fastbridge | |
sh: can't create /proc/fastbridge: nonexistent directory | |
CMD: /bin/sysconf send_unix_sock_message /var/run/systemd.usock do_flow_flush 8 | |
CMD: /bin/ebtables -I INPUT -j macfilter_local_in | |
CMD: /bin/ebtables -A OUTPUT -j macfilter_local_out | |
CMD: /bin/ebtables -I FORWARD -j macfilter_forward | |
CMD: /bin/iptables -A INPUT -i br+ -j ACCEPT | |
CMD: /bin/iptables -A INPUT -i eth+ -j ACCEPT | |
CMD: /bin/iptables -A INPUT -i wlan+ -j ACCEPT | |
CMD: /bin/ip6tables -P INPUT DROP | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type router-solicitation -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type router-advertisement -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type neighbour-solicitation -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type neighbour-advertisement -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type 130 -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p icmpv6 -i br+ -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -i br+ -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT | |
CMD: /bin/ip6tables -A INPUT -p udp --dport 546 -j ACCEPT | |
MIB_Table_Init Init mib table:mib_Me242.so fail, error code is:1... | |
CMD: /bin/ip6tables -A INPUT ! -i br0 -p udp MIB_Table_Init Init mib table:mib_Me243.so fail, error code is:1... | |
--dport 547 [prt] dns server: 223.5.5.5 | |
-j ACCEPT | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[4], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
MIB_Table_Init Init mib table:mib_Me350.so fail, error code is:1... | |
CMD: /bin/ip6tables -N ipv6filter | |
CMD: /bin/ip6tables -A FORWARD -j ipv6filter | |
MIB_Table_Init Init mib table:mib_Me370.so fail, error code is:1... | |
MIB_Table_Init Init mib table:mib_Me373.so fail, error code is:1... | |
Ignore classId:65305 | |
MIB_Table_Init Init mib table:mib_Me65305.so fail, error code is:1... | |
Ignore classId:65427 | |
MIB_Table_Init Init mib table:mib_Me65427.so fail, error code is:1... | |
Restart IPv6 Filter! | |
CMD: /bin/ip6tables -F ipv6filter | |
CMD: /bin/ip6tables -A ipv6filter -m state --state ESTABLISHED,RELATED -j RETURN | |
CMD: /bin/ip6tables -A ipv6filter ! -i br+ -j DROP | |
voip_set_rg_1p_tag | |
CMD: /bin/iptables -t mangle -F voip_remarking | |
CMD: /bin/ip6tables -t mangle -F voip_remarking | |
CMD: /bin/smuxctl --if nas0 --tx --tags 1 --rule-remove-alias voip_remark_8021p_us_+ | |
/bin/iptables -t mangle -A voip_remarking -o nas0_2 -p UDP --dport 5060 -j MARK --set-mark 0x70/0x70 | |
/bin/iptables -t mangle -A voip_remarking -o nas0_2 -p UDP --sport 9000:9010 -j MARK --set-mark 0x70/0x70 | |
CMD: /bin/iptables -N vpnPassThrough | |
CMD: /bin/iptables -A FORWARD -j vpnPassThrough | |
CMD: /bin/ip6tables -N vpnPassThrough | |
CMD: /bin/ip6tables -A FORWARD -j vpnPassThrough | |
CMD: /bin/ebtables -N ISOLATION_MAP | |
CMD: /bin/ebtables -P ISOLATION_MAP RETURN | |
CMD: /bin/ebtables -I FORWARD -j ISOLATION_MAP | |
CMD: /bin/ebtables -N ISOLATION_BRPORT | |
CMD: /bin/ebtables -P ISOLATION_BRPORT DROP | |
CMD: /bin/ebtables -A ISOLATION_BRPORT -i nas0+ -j RETURN | |
CMD: /bin/ebtables -A ISOLATION_BRPORT -o nas0+ -j RETURN | |
Ignore classId:255 SubType:0 | |
MIB_Table_Init Init mib table:mib_PrivateTellionOntStatistics.so fail, error code is:1... | |
CMD: /bin/ebtables -A ISOLATION_BRPORT -d 1:80:c2:0:0:0/ff:ff:ff:0:0:0 -j RETURN | |
CMD: /bin/ebtables -D ISOLATION_MAP --logical-out br0 -j ISOLATION_BRPORT | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -N L2_PPTP_PORT_SERVICE | |
CMD: /bin/ebtables -P L2_PPTP_PORT_SERVICE RETURN | |
CMD: /bin/ebtables -A L2_PPTP_PORT_SERVICE -p ipv4 --ip-proto udp --ip-dport 67:68 -j DROP | |
CMD: /bin/ebtables -A L2_PPTP_PORT_SERVICE -p ipv4 --ip-proto 2 -j DROP | |
CMD: /bin/ebtables -A L2_PPTP_PORT_SERVICE -p ipv6 --ip6-proto udp --ip6-dport 546:547 -j DROP | |
CMD: /bin/ebtables -A L2_PPTP_PORT_SERVICE -p ipv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:134 -j DROP | |
CMD: /bin/ebtables -N L2_PPTP_PORT_FORWARD | |
CMD: /bin/ebtables -P L2_PPTP_PORT_FORWARD DROP | |
CMD: /bin/ebtables -A L2_PPTP_PORT_FORWARD -d 01:80:C2:00:00:00/FF:FF:FF:00:00:00 -j RETURN | |
CMD: /bin/ebtables -A L2_PPTP_PORT_FORWARD -i nas+ -j RETURN | |
CMD: /bin/ebtables -N L2_PPTP_PORT_INPUT_TBL | |
CMD: /bin/ebtables -P L2_PPTP_PORT_INPUT_TBL RETURN | |
CMD: /bin/ebtables -I INPUT -j L2_PPTP_PORT_INPUT_TBL | |
CMD: /bin/ebtables -N L2_PPTP_PORT_OUTPUT_TBL | |
CMD: /bin/ebtables -P L2_PPTP_PORT_OUTPUT_TBL RETURN | |
CMD: /bin/ebtables -I OUTPUT -j L2_PPTP_PORT_OUTPUT_TBL | |
CMD: /bin/ebtables -N L2_PPTP_PORT_FORWARD_TBL | |
CMD: /bin/ebtables -P L2_PPTP_PORT_FORWARD_TBL RETURN | |
CMD: /bin/ebtables -I FORWARD -j L2_PPTP_PORT_FORWARD_TBL | |
CMD: /bin/sysconf send_unix_sock_message /var/run/systemd.usock do_flow_flush 8 | |
subr_qos_3.c: setupQosRuleMainChain 5602 | |
CMD: /bin/ebtables -t broute -N qos_eb_us_rules | |
CMD: /bin/ebtables -t broute -P qos_eb_us_rules RETURN | |
CMD: /bin/ebtables -t broute -A BROUTING -j qos_eb_us_rules | |
CMD: /bin/ebtables -t nat -N qos_eb_ds_rules | |
Ignore classId:345,only support on G.987 ONU | |
MIB_Table_Init Init mib table:mib_XgponDsMangPMHD.so fail, error code is:1... | |
CMD: /bin/ebtables -t nat -P qos_eb_ds_rules RETURN | |
Ignore classId:344,only support on G.987 ONU | |
MIB_Table_Init Init mib table:mib_XgponTcPMHD.so fail, error code is:1... | |
Ignore classId:346,only support on G.987 ONU | |
MIB_Table_Init Init mib table:mib_XgponUsMangPMHD.so fail, error code is:1... | |
CMD: /bin/ebtables -t nat -A POSTROUTING -j qos_eb_ds_rules | |
CMD: /bin/iptables -t mangle -N qos_ip_rules | |
CMD: /bin/iptables -t mangle -A FORWARD -j qos_ip_rules | |
CMD: /bin/iptables -t mangle -N qos_ip_us_rules | |
CMD: /bin/iptables -t mangle -A qos_ip_rules -m physdev --physdev-in eth+ -j qos_ip_us_rules | |
CMD: /bin/iptables -t mangle -A qos_ip_rules -m physdev --physdev-in wlan+ -j qos_ip_us_rules | |
CMD: /bin/iptables -t mangle -N qos_ip_ds_rules | |
CMD: /bin/iptables -t mangle -A qos_ip_rules -o br+ -j qos_ip_ds_rules | |
CMD: /bin/iptables -t mangle -N pvc_mark | |
CMD: /bin/iptables -t mangle -A FORWARD -j pvc_mark | |
CMD: /bin/iptables -t mangle -N qos_rule_output | |
CMD: /bin/iptables -t mangle -A OUTPUT -j qos_rule_output | |
CMD: /bin/iptables -t mangle -N pvc_mark_output | |
CMD: /bin/iptables -t mangle -A OUTPUT -j pvc_mark_output | |
CMD: /bin/iptables -t mangle -N qos_iptable_action_us_rules | |
CMD: /bin/iptables -t mangle -A POSTROUTING -j qos_iptable_action_us_rules | |
CMD: /bin/ip6tables -t mangle -N qos_ip_rules | |
CMD: /bin/ip6tables -t mangle -A FORWARD -j qos_ip_rules | |
CMD: /bin/ip6tables -t mangle -N qos_ip_us_rules | |
CMD: /bin/ip6tables -t mangle -A qos_ip_rules -m physdev --physdev-in eth+ -j qos_ip_us_rules | |
CMD: /bin/ip6tables -t mangle -A qos_ip_rules -m physdev --physdev-in wlan+ -j qos_ip_us_rules | |
CMD: /bin/ip6tables -t mangle -N qos_ip_ds_rules | |
CMD: /bin/ip6tables -t mangle -A qos_ip_rules -o br+ -j qos_ip_ds_rules | |
CMD: /bin/ip6tables -t mangle -N pvc_mark | |
CMD: /bin/ip6tables -t mangle -A FORWARD -j pvc_mark | |
CMD: /bin/ip6tables -t mangle -N qos_rule_output | |
CMD: /bin/ip6tables -t mangle -A OUTPUT -j qos_rule_output | |
CMD: /bin/ip6tables -t mangle -N pvc_mark_output | |
CMD: /bin/ip6tables -t mangle -A OUTPUT -j pvc_mark_output | |
CMD: /bin/ip6tables -t mangle -N qos_iptable_action_us_rules | |
CMD: /bin/ip6tables -t mangle -A POSTROUTING -j qos_iptable_action_us_rules | |
CMD: /bin/iptables -t mangle -D FORWARD -j dscp_remark | |
CMD: /bin/iptables -t mangle -F dscp_remark | |
CMD: /bin/iptables -t mangle -X dscp_remark | |
CMD: /bin/iptables -t mangle -F dscp_remark_UP | |
CMD: /bin/iptables -t mangle -X dscp_remark_UP | |
CMD: /bin/iptables -t mangle -F dscp_remark_DOWN | |
CMD: /bin/iptables -t mangle -X dscp_remark_DOWN | |
CMD: /bin/ip6tables -t mangle -D FORWARD -j dscp_remark | |
CMD: /bin/ip6tables -t mangle -F dscp_remark | |
CMD: /bin/ip6tables -t mangle -X dscp_remark | |
CMD: /bin/ip6tables -t mangle -F dscp_remark_UP | |
CMD: /bin/ip6tables -t mangle -X dscp_remark_UP | |
CMD: /bin/ip6tables -t mangle -F dscp_remark_DOWN | |
CMD: /bin/ip6tables -t mangle -X dscp_remark_DOWN | |
CMD: /bin/iptables -t mangle -N dscp_remark | |
CMD: /bin/iptables -t mangle -N dscp_remark_UP | |
CMD: /bin/iptables -t mangle -N dscp_remark_DOWN | |
CMD: /bin/ip6tables -t mangle -N dscp_remark | |
CMD: /bin/ip6tables -t mangle -N dscp_remark_UP | |
CMD: /bin/ip6tables -t mangle -N dscp_remark_DOWN | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x0/0x1f800000 -j DSCP --set-dscp 0x0 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x0/0x1f800000 -j DSCP --set-dscp 0x0 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x800000/0x1f800000 -j DSCP --set-dscp 0x1 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x800000/0x1f800000 -j DSCP --set-dscp 0x1 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1000000/0x1f800000 -j DSCP --set-dscp 0x2 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1000000/0x1f800000 -j DSCP --set-dscp 0x2 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1800000/0x1f800000 -j DSCP --set-dscp 0x3 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1800000/0x1f800000 -j DSCP --set-dscp 0x3 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x2000000/0x1f800000 -j DSCP --set-dscp 0x4 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x2000000/0x1f800000 -j DSCP --set-dscp 0x4 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x2800000/0x1f800000 -j DSCP --set-dscp 0x5 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x2800000/0x1f800000 -j DSCP --set-dscp 0x5 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x3000000/0x1f800000 -j DSCP --set-dscp 0x6 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x3000000/0x1f800000 -j DSCP --set-dscp 0x6 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x3800000/0x1f800000 -j DSCP --set-dscp 0x7 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x3800000/0x1f800000 -j DSCP --set-dscp 0x7 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x4000000/0x1f800000 -j DSCP --set-dscp 0x8 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x4000000/0x1f800000 -j DSCP --set-dscp 0x8 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x4800000/0x1f800000 -j DSCP --set-dscp 0x9 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x4800000/0x1f800000 -j DSCP --set-dscp 0x9 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x5000000/0x1f800000 -j DSCP --set-dscp 0xa | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x5000000/0x1f800000 -j DSCP --set-dscp 0xa | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x5800000/0x1f800000 -j DSCP --set-dscp 0xb | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x5800000/0x1f800000 -j DSCP --set-dscp 0xb | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x6000000/0x1f800000 -j DSCP --set-dscp 0xc | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x6000000/0x1f800000 -j DSCP --set-dscp 0xc | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x6800000/0x1f800000 -j DSCP --set-dscp 0xd | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x6800000/0x1f800000 -j DSCP --set-dscp 0xd | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x7000000/0x1f800000 -j DSCP --set-dscp 0xe | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x7000000/0x1f800000 -j DSCP --set-dscp 0xe | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x7800000/0x1f800000 -j DSCP --set-dscp 0xf | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x7800000/0x1f800000 -j DSCP --set-dscp 0xf | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x8000000/0x1f800000 -j DSCP --set-dscp 0x10 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x8000000/0x1f800000 -j DSCP --set-dscp 0x10 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x8800000/0x1f800000 -j DSCP --set-dscp 0x11 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x8800000/0x1f800000 -j DSCP --set-dscp 0x11 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[5], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x9000000/0x1f800000 -j DSCP --set-dscp 0x12 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x9000000/0x1f800000 -j DSCP --set-dscp 0x12 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x9800000/0x1f800000 -j DSCP --set-dscp 0x13 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x9800000/0x1f800000 -j DSCP --set-dscp 0x13 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xa000000/0x1f800000 -j DSCP --set-dscp 0x14 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xa000000/0x1f800000 -j DSCP --set-dscp 0x14 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xa800000/0x1f800000 -j DSCP --set-dscp 0x15 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xa800000/0x1f800000 -j DSCP --set-dscp 0x15 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xb000000/0x1f800000 -j DSCP --set-dscp 0x16 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xb000000/0x1f800000 -j DSCP --set-dscp 0x16 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xb800000/0x1f800000 -j DSCP --set-dscp 0x17 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xb800000/0x1f800000 -j DSCP --set-dscp 0x17 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xc000000/0x1f800000 -j DSCP --set-dscp 0x18 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xc000000/0x1f800000 -j DSCP --set-dscp 0x18 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xc800000/0x1f800000 -j DSCP --set-dscp 0x19 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xc800000/0x1f800000 -j DSCP --set-dscp 0x19 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xd000000/0x1f800000 -j DSCP --set-dscp 0x1a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xd000000/0x1f800000 -j DSCP --set-dscp 0x1a | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xd800000/0x1f800000 -j DSCP --set-dscp 0x1b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xd800000/0x1f800000 -j DSCP --set-dscp 0x1b | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xe000000/0x1f800000 -j DSCP --set-dscp 0x1c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xe000000/0x1f800000 -j DSCP --set-dscp 0x1c | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xe800000/0x1f800000 -j DSCP --set-dscp 0x1d | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xe800000/0x1f800000 -j DSCP --set-dscp 0x1d | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xf000000/0x1f800000 -j DSCP --set-dscp 0x1e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xf000000/0x1f800000 -j DSCP --set-dscp 0x1e | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xf800000/0x1f800000 -j DSCP --set-dscp 0x1f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0xf800000/0x1f800000 -j DSCP --set-dscp 0x1f | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x10000000/0x1f800000 -j DSCP --set-dscp 0x20 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x10000000/0x1f800000 -j DSCP --set-dscp 0x20 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x10800000/0x1f800000 -j DSCP --set-dscp 0x21 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x10800000/0x1f800000 -j DSCP --set-dscp 0x21 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x11000000/0x1f800000 -j DSCP --set-dscp 0x22 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x11000000/0x1f800000 -j DSCP --set-dscp 0x22 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x11800000/0x1f800000 -j DSCP --set-dscp 0x23 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x11800000/0x1f800000 -j DSCP --set-dscp 0x23 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x12000000/0x1f800000 -j DSCP --set-dscp 0x24 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x12000000/0x1f800000 -j DSCP --set-dscp 0x24 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x12800000/0x1f800000 -j DSCP --set-dscp 0x25 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x12800000/0x1f800000 -j DSCP --set-dscp 0x25 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x13000000/0x1f800000 -j DSCP --set-dscp 0x26 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x13000000/0x1f800000 -j DSCP --set-dscp 0x26 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x13800000/0x1f800000 -j DSCP --set-dscp 0x27 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x13800000/0x1f800000 -j DSCP --set-dscp 0x27 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x14000000/0x1f800000 -j DSCP --set-dscp 0x28 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x14000000/0x1f800000 -j DSCP --set-dscp 0x28 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x14800000/0x1f800000 -j DSCP --set-dscp 0x29 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x14800000/0x1f800000 -j DSCP --set-dscp 0x29 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x15000000/0x1f800000 -j DSCP --set-dscp 0x2a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x15000000/0x1f800000 -j DSCP --set-dscp 0x2a | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x15800000/0x1f800000 -j DSCP --set-dscp 0x2b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x15800000/0x1f800000 -j DSCP --set-dscp 0x2b | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x16000000/0x1f800000 -j DSCP --set-dscp 0x2c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x16000000/0x1f800000 -j DSCP --set-dscp 0x2c | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x16800000/0x1f800000 -j DSCP --set-dscp 0x2d | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x16800000/0x1f800000 -j DSCP --set-dscp 0x2d | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x17000000/0x1f800000 -j DSCP --set-dscp 0x2e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x17000000/0x1f800000 -j DSCP --set-dscp 0x2e | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x17800000/0x1f800000 -j DSCP --set-dscp 0x2f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x17800000/0x1f800000 -j DSCP --set-dscp 0x2f | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x18000000/0x1f800000 -j DSCP --set-dscp 0x30 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x18000000/0x1f800000 -j DSCP --set-dscp 0x30 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x18800000/0x1f800000 -j DSCP --set-dscp 0x31 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x18800000/0x1f800000 -j DSCP --set-dscp 0x31 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x19000000/0x1f800000 -j DSCP --set-dscp 0x32 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x19000000/0x1f800000 -j DSCP --set-dscp 0x32 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x19800000/0x1f800000 -j DSCP --set-dscp 0x33 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x19800000/0x1f800000 -j DSCP --set-dscp 0x33 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1a000000/0x1f800000 -j DSCP --set-dscp 0x34 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1a000000/0x1f800000 -j DSCP --set-dscp 0x34 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1a800000/0x1f800000 -j DSCP --set-dscp 0x35 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1a800000/0x1f800000 -j DSCP --set-dscp 0x35 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1b000000/0x1f800000 -j DSCP --set-dscp 0x36 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1b000000/0x1f800000 -j DSCP --set-dscp 0x36 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1b800000/0x1f800000 -j DSCP --set-dscp 0x37 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1b800000/0x1f800000 -j DSCP --set-dscp 0x37 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1c000000/0x1f800000 -j DSCP --set-dscp 0x38 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1c000000/0x1f800000 -j DSCP --set-dscp 0x38 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1c800000/0x1f800000 -j DSCP --set-dscp 0x39 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1c800000/0x1f800000 -j DSCP --set-dscp 0x39 | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1d000000/0x1f800000 -j DSCP --set-dscp 0x3a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1d000000/0x1f800000 -j DSCP --set-dscp 0x3a | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1d800000/0x1f800000 -j DSCP --set-dscp 0x3b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1d800000/0x1f800000 -j DSCP --set-dscp 0x3b | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1e000000/0x1f800000 -j DSCP --set-dscp 0x3c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1e000000/0x1f800000 -j DSCP --set-dscp 0x3c | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1e800000/0x1f800000 -j DSCP --set-dscp 0x3d | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1e800000/0x1f800000 -j DSCP --set-dscp 0x3d | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1f000000/0x1f800000 -j DSCP --set-dscp 0x3e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1f000000/0x1f800000 -j DSCP --set-dscp 0x3e | |
CMD: /bin/iptables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1f800000/0x1f800000 -j DSCP --set-dscp 0x3f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_UP -m mark2 --mark2 0x1f800000/0x1f800000 -j DSCP --set-dscp 0x3f | |
CMD: /bin/iptables -t mangle -A dscp_remark ! -o br+ -m mark2 --mark2 0x20000000/0x20000000 -j dscp_remark_UP | |
CMD: /bin/ip6tables -t mangle -A dscp_remark ! -o br+ -m mark2 --mark2 0x20000000/0x20000000 -j dscp_remark_UP | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x0/0xfc0000000 -j DSCP --set-dscp 0x0 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x0/0xfc0000000 -j DSCP --set-dscp 0x0 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x40000000/0xfc0000000 -j DSCP --set-dscp 0x1 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x40000000/0xfc0000000 -j DSCP --set-dscp 0x1 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x80000000/0xfc0000000 -j DSCP --set-dscp 0x2 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x80000000/0xfc0000000 -j DSCP --set-dscp 0x2 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc0000000/0xfc0000000 -j DSCP --set-dscp 0x3 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc0000000/0xfc0000000 -j DSCP --set-dscp 0x3 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x100000000/0xfc0000000 -j DSCP --set-dscp 0x4 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x100000000/0xfc0000000 -j DSCP --set-dscp 0x4 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x140000000/0xfc0000000 -j DSCP --set-dscp 0x5 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x140000000/0xfc0000000 -j DSCP --set-dscp 0x5 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x180000000/0xfc0000000 -j DSCP --set-dscp 0x6 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x180000000/0xfc0000000 -j DSCP --set-dscp 0x6 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x1c0000000/0xfc0000000 -j DSCP --set-dscp 0x7 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x1c0000000/0xfc0000000 -j DSCP --set-dscp 0x7 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x200000000/0xfc0000000 -j DSCP --set-dscp 0x8 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x200000000/0xfc0000000 -j DSCP --set-dscp 0x8 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x240000000/0xfc0000000 -j DSCP --set-dscp 0x9 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x240000000/0xfc0000000 -j DSCP --set-dscp 0x9 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x280000000/0xfc0000000 -j DSCP --set-dscp 0xa | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x280000000/0xfc0000000 -j DSCP --set-dscp 0xa | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x2c0000000/0xfc0000000 -j DSCP --set-dscp 0xb | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x2c0000000/0xfc0000000 -j DSCP --set-dscp 0xb | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x300000000/0xfc0000000 -j DSCP --set-dscp 0xc | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x300000000/0xfc0000000 -j DSCP --set-dscp 0xc | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x340000000/0xfc0000000 -j DSCP --set-dscp 0xd | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x340000000/0xfc0000000 -j DSCP --set-dscp 0xd | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x380000000/0xfc0000000 -j DSCP --set-dscp 0xe | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x380000000/0xfc0000000 -j DSCP --set-dscp 0xe | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x3c0000000/0xfc0000000 -j DSCP --set-dscp 0xf | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[6], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x3c0000000/0xfc0000000 -j DSCP --set-dscp 0xf | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x400000000/0xfc0000000 -j DSCP --set-dscp 0x10 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x400000000/0xfc0000000 -j DSCP --set-dscp 0x10 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x440000000/0xfc0000000 -j DSCP --set-dscp 0x11 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x440000000/0xfc0000000 -j DSCP --set-dscp 0x11 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x480000000/0xfc0000000 -j DSCP --set-dscp 0x12 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x480000000/0xfc0000000 -j DSCP --set-dscp 0x12 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x4c0000000/0xfc0000000 -j DSCP --set-dscp 0x13 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x4c0000000/0xfc0000000 -j DSCP --set-dscp 0x13 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x500000000/0xfc0000000 -j DSCP --set-dscp 0x14 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x500000000/0xfc0000000 -j DSCP --set-dscp 0x14 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x540000000/0xfc0000000 -j DSCP --set-dscp 0x15 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x540000000/0xfc0000000 -j DSCP --set-dscp 0x15 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x580000000/0xfc0000000 -j DSCP --set-dscp 0x16 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x580000000/0xfc0000000 -j DSCP --set-dscp 0x16 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x5c0000000/0xfc0000000 -j DSCP --set-dscp 0x17 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x5c0000000/0xfc0000000 -j DSCP --set-dscp 0x17 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x600000000/0xfc0000000 -j DSCP --set-dscp 0x18 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x600000000/0xfc0000000 -j DSCP --set-dscp 0x18 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x640000000/0xfc0000000 -j DSCP --set-dscp 0x19 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x640000000/0xfc0000000 -j DSCP --set-dscp 0x19 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x680000000/0xfc0000000 -j DSCP --set-dscp 0x1a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x680000000/0xfc0000000 -j DSCP --set-dscp 0x1a | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x6c0000000/0xfc0000000 -j DSCP --set-dscp 0x1b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x6c0000000/0xfc0000000 -j DSCP --set-dscp 0x1b | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x700000000/0xfc0000000 -j DSCP --set-dscp 0x1c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x700000000/0xfc0000000 -j DSCP --set-dscp 0x1c | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x740000000/0xfc0000000 -j DSCP --set-dscp 0x1d | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x740000000/0xfc0000000 -j DSCP --set-dscp 0x1d | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x780000000/0xfc0000000 -j DSCP --set-dscp 0x1e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x780000000/0xfc0000000 -j DSCP --set-dscp 0x1e | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x7c0000000/0xfc0000000 -j DSCP --set-dscp 0x1f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x7c0000000/0xfc0000000 -j DSCP --set-dscp 0x1f | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x800000000/0xfc0000000 -j DSCP --set-dscp 0x20 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x800000000/0xfc0000000 -j DSCP --set-dscp 0x20 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x840000000/0xfc0000000 -j DSCP --set-dscp 0x21 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x840000000/0xfc0000000 -j DSCP --set-dscp 0x21 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x880000000/0xfc0000000 -j DSCP --set-dscp 0x22 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x880000000/0xfc0000000 -j DSCP --set-dscp 0x22 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x8c0000000/0xfc0000000 -j DSCP --set-dscp 0x23 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x8c0000000/0xfc0000000 -j DSCP --set-dscp 0x23 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x900000000/0xfc0000000 -j DSCP --set-dscp 0x24 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x900000000/0xfc0000000 -j DSCP --set-dscp 0x24 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x940000000/0xfc0000000 -j DSCP --set-dscp 0x25 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x940000000/0xfc0000000 -j DSCP --set-dscp 0x25 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x980000000/0xfc0000000 -j DSCP --set-dscp 0x26 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x980000000/0xfc0000000 -j DSCP --set-dscp 0x26 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x9c0000000/0xfc0000000 -j DSCP --set-dscp 0x27 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0x9c0000000/0xfc0000000 -j DSCP --set-dscp 0x27 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa00000000/0xfc0000000 -j DSCP --set-dscp 0x28 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa00000000/0xfc0000000 -j DSCP --set-dscp 0x28 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa40000000/0xfc0000000 -j DSCP --set-dscp 0x29 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa40000000/0xfc0000000 -j DSCP --set-dscp 0x29 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa80000000/0xfc0000000 -j DSCP --set-dscp 0x2a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xa80000000/0xfc0000000 -j DSCP --set-dscp 0x2a | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xac0000000/0xfc0000000 -j DSCP --set-dscp 0x2b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xac0000000/0xfc0000000 -j DSCP --set-dscp 0x2b | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb00000000/0xfc0000000 -j DSCP --set-dscp 0x2c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb00000000/0xfc0000000 -j DSCP --set-dscp 0x2c | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb40000000/0xfc0000000 -j DSCP --set-dscp 0x2d | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb40000000/0xfc0000000 -j DSCP --set-dscp 0x2d | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb80000000/0xfc0000000 -j DSCP --set-dscp 0x2e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xb80000000/0xfc0000000 -j DSCP --set-dscp 0x2e | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xbc0000000/0xfc0000000 -j DSCP --set-dscp 0x2f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xbc0000000/0xfc0000000 -j DSCP --set-dscp 0x2f | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc00000000/0xfc0000000 -j DSCP --set-dscp 0x30 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc00000000/0xfc0000000 -j DSCP --set-dscp 0x30 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc40000000/0xfc0000000 -j DSCP --set-dscp 0x31 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc40000000/0xfc0000000 -j DSCP --set-dscp 0x31 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc80000000/0xfc0000000 -j DSCP --set-dscp 0x32 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xc80000000/0xfc0000000 -j DSCP --set-dscp 0x32 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xcc0000000/0xfc0000000 -j DSCP --set-dscp 0x33 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xcc0000000/0xfc0000000 -j DSCP --set-dscp 0x33 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd00000000/0xfc0000000 -j DSCP --set-dscp 0x34 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd00000000/0xfc0000000 -j DSCP --set-dscp 0x34 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd40000000/0xfc0000000 -j DSCP --set-dscp 0x35 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd40000000/0xfc0000000 -j DSCP --set-dscp 0x35 [prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[7], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd80000000/0xfc0000000 -j DSCP --set-dscp 0x36 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xd80000000/0xfc0000000 -j DSCP --set-dscp 0x36 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xdc0000000/0xfc0000000 -j DSCP --set-dscp 0x37 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xdc0000000/0xfc0000000 -j DSCP --set-dscp 0x37 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe00000000/0xfc0000000 -j DSCP --set-dscp 0x38 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe00000000/0xfc0000000 -j DSCP --set-dscp 0x38 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe40000000/0xfc0000000 -j DSCP --set-dscp 0x39 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe40000000/0xfc0000000 -j DSCP --set-dscp 0x39 | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe80000000/0xfc0000000 -j DSCP --set-dscp 0x3a | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xe80000000/0xfc0000000 -j DSCP --set-dscp 0x3a | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xec0000000/0xfc0000000 -j DSCP --set-dscp 0x3b | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xec0000000/0xfc0000000 -j DSCP --set-dscp 0x3b | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf00000000/0xfc0000000 -j DSCP --set-dscp 0x3c | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf00000000/0xfc0000000 -j DSCP --set-dscp 0x3c | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf40000000/0xfc0000000 -j DSCP --set-dscp 0x3d | |
CMD: /bin/ip6tabnf_conntrack_pptp: unknown parameter 'ports' ignored | |
les -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf40000000/0xfc0000000 -j DSCP --set-dscp 0x3d | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf80000000/0xfc0000000 -j DSCP --set-dscp 0x3e | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xf80000000/0xfc0000000 -j DSCP --set-dscp 0x3e | |
CMD: /bin/iptables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xfc0000000/0xfc0000000 -j DSCP --set-dscp 0x3f | |
CMD: /bin/ip6tables -t mangle -A dscp_remark_DOWN -m mark2 --mark2 0xfc000000nf_conntrack_h323: unknown parameter 'ports' ignored | |
0/0xfc0000000 -j DSCP --set-dscp 0x3f | |
CMD: /bin/iptables -t mangle -A dscp_remark -o br+ -m mark2 --manf_conntrack_rtsp v0.7 loading | |
rk2 0x1000000000/0x1000000000 -j dscp_remark_DOWN | |
nf_nat_rtsp v0.7 loading | |
CMD: /bin/ip6tables -t mangle -A dscp_remark -o br+ -m mark2 --mark2 0x1000000000/0x1000000000 -j dscp_remark_DOWN | |
CMD: /bin/iptables -t mangle -A dscp_remark -j CONNMARK2 --save-mark2 --mask2 0x1fff800000 | |
CMD: /bin/ip6tables -t mangle -A dscp_remark -j CONNMARK2 --save-mark2 --mask2 0x1fff800000 | |
CMD: /bin/iptables -t mangle -A FORWARD -j dscp_remark | |
CMD: /bin/ip6tables -t mangle -A FORWARD -j dscp_remark | |
[setTmpBlockBridgeFloodPktRule 2646]restore RA in bridge fowward! | |
CMD: /bin/ebtables -D FORWARD -d Multicast -p IPV6 --ip6-protocol ipv6-icmp --ip6-icmp-type 134 -j DROP | |
Sorry, rule does not exist. | |
CMD: /bin/iptables -P FORWARD ACCEPT | |
CMD: /bin/ebtables -P FORWARD ACCEPT | |
CMD: /bin/sh -c echo 1 > /sys/devices/virtual/net/br0/bridge/multicast_router | |
CMD: /bin/iptables -F vpnPassThrough | |
CMD: /bin/ip6tables -F vpnPassThrough | |
setupAlgOnOff:5010 ipsec_port ports=500,4500 | |
CMD: /bin/modprobe nf_conntrack_ipsec ports=500,4500 | |
modprobe: module nf_conntrack_ipsec not found in modules.dep | |
CMD: /bin/modprobe nf_nat_ipsec | |
modprobe: module nf_nat_ipsec not found in modules.dep | |
setupAlgOnOff:5054 pptp_port ports=1723 | |
CMD: /bin/modprobe nf_conntrack_pptp ports=1723 | |
CMD: /bin/modprobe nf_nat_pptp | |
setupAlgOnOff:5079 ftp_port ports=21 | |
CMD: /bin/modprobe nf_conntrack_ftp ports=21 | |
CMD: /bin/modprobe nf_nat_ftp | |
setupAlgOnOff:5103 tftp_port ports=69 | |
CMD: /bin/modprobe nf_conntrack_tftp ports=69 | |
CMD: /bin/modprobe nf_nat_tftp | |
setupAlgOnOff:5131 h323_port ports=1729,1720 | |
CMD: /bin/modprobe nf_conntrack_h323 ports=1729,1720 | |
CMD: /bin/modprobe nf_nat_h323 | |
setupAlgOnOff:5182 rtsp_port ports=554,8554 | |
CMD: /bin/modprobe nf_conntrack_rtsp ports=554,8554 | |
CMD: /bin/modprobe nf_nat_rtsp | |
setupAlgOnOff:5209 sip_port ports=5060 | |
CMD: /bin/modprobe nf_conntrack_sip ports=5060 | |
CMD: /bin/modprobe nf_nat_sip | |
CMD: /bin/ethctl conntrack killall | |
Error ioctl in ethctl Operation not supported 95 | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_0+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_0+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_0+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_0 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_0+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_1+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_1+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 1 --filter-vid 600 1 --filter-multicast --set-rxif nas0_1 --target ACCEPT --rule-priority 950 --rule-alias iptv_mvlan_nas0_1 --rule-insert | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 1 --filter-vid 600 1 --filter-multicast --set-vid 600 1 --set-skb-mark2 0x2000 0x2000 --rule-priority 950 --rule-alias iptv_mvlan_nas0_1 --rule-insert | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_1+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_1+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 2 --filter-vid 600 2 --filter-multicast --set-rxif nas0_1 --target ACCEPT --rule-priority 950 --rule-alias iptv_mvlan_nas0_1 --rule-insert | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_1 --rx --tags 2 --filter-vid 600 2 --filter-multicast --set-vid 600 2 --set-skb-mark2 0x2000 0x2000 --rule-priority 950 --rule-alias iptv_mvlan_nas0_1 --rule-insert | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_2+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_2+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_2+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_2 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_2+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_3+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --rx --tags 1 --rule-remove-alias iptv_mvlan_nas0_3+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_3+ | |
CMD: /bin/sh -c /bin/smuxctl --if nas0_3 --rx --tags 2 --rule-remove-alias iptv_mvlan_nas0_3+ | |
CMD: /bin/sh -c echo 1 > /sys/class/net/br0/bridge/multicast_snooping | |
CMD: /bin/sh -c echo 2 > sys/devices/virtual/net/br0/bridge/multicast_router | |
CMD: /bin/sh -c echo 2 > /sys/devices/virtual/net/nas0_1/brport/multicast_router | |
[setTmpBlockBridgeFloodPktRule 2641]temporarily block RA in bridge fowward! | |
CMD: /bin/ebtables -I FORWARD -d Multicast -p IPV6 --ip6-protocol ipv6-icmp --ip6-icmp-type 134 -j DROP | |
CMD: /bin/ebtables -D INPUT -j portmapping_input | |
Illegal target name 'portmapping_input'. | |
CMD: /bin/ebtables -F portmapping_input | |
Chain 'portmapping_input' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_input | |
Chain 'portmapping_input' doesn't exist. | |
CMD: /bin/ebtables -D OUTPUT -j portmapping_output | |
Illegal target name 'portmapping_output'. | |
CMD: /bin/ebtables -F portmapping_output | |
Chain 'portmapping_output' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_output | |
Chain 'portmapping_output' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_service | |
Chain 'portmapping_service' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_service | |
Chain 'portmapping_service' doesn't exist. | |
CMD: /bin/ebtables -D FORWARD -j portmapping_special_lan4 | |
Illegal target name 'portmapping_special_lan4'. | |
CMD: /bin/ebtables -F portmapping_special_lan4 | |
Chain 'portmapping_special_lan4' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_special_lan4 | |
Chain 'portmapping_special_lan4' doesn't exist. | |
CMD: /bin/ebtables -t broute -D BROUTING -j portmapping_broute_special_lan4 | |
Illegal target name 'portmapping_broute_special_lan4'. | |
CMD: /bin/ebtables -t broute -F portmapping_broute_special_lan4 | |
Chain 'portmapping_broute_special_lan4' doesn't exist. | |
CMD: /bin/ebtables -t broute -X portmapping_broute_special_lan4 | |
Chain 'portmapping_broute_special_lan4' doesn't exist. | |
CMD: /bin/ebtables -D FORWARD -j portmapping | |
Illegal target name 'portmapping'. | |
CMD: /bin/ebtables -F portmapping | |
Chain 'portmapping' doesn't exist. | |
CMD: /bin/ebtables -X portmapping | |
Chain 'portmapping' doesn't exist. | |
CMD: /bin/ebtables -t broute -D BROUTING -j portmapping_broute | |
Illegal target name 'portmapping_broute'. | |
CMD: /bin/ebtables -t broute -F portmapping_broute | |
Chain 'portmapping_broute' doesn't exist. | |
CMD: /bin/ebtables -t broute -X portmapping_broute | |
Chain 'portmapping_broute' doesn't exist. | |
CMD: /bin/iptables -t mangle -D PREROUTING -j portmapping_rt_tbl | |
iptables v1.4.18: Couldn't load target `portmapping_rt_tbl':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t mangle -F portmapping_rt_tbl | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t mangle -X portmapping_rt_tbl | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -t mangle -D PREROUTING -j portmapping_rt_tbl | |
ip6tables v1.4.18: Couldn't load target `portmapping_rt_tbl':No such file or directory | |
Try `ip6tables -h' or 'ip6tables --help' for more information. | |
CMD: /bin/ip6tables -t mangle -F portmapping_rt_tbl | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -t mangle -X portmapping_rt_tbl | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ebtables -F portmapping_nas0_0_in | |
Chain 'portmapping_nas0_0_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_0_in | |
Chain 'portmapping_nas0_0_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_0_out | |
Chain 'portmapping_nas0_0_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_0_out | |
Chain 'portmapping_nas0_0_out' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_1_in | |
Chain 'portmapping_nas0_1_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_1_in | |
Chain 'portmapping_nas0_1_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_1_out | |
Chain 'portmapping_nas0_1_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_1_out | |
Chain 'portmapping_nas0_1_out' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_2_br_in | |
Chain 'portmapping_nas0_2_br_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_2_br_in | |
Chain 'portmapping_nas0_2_br_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_2_br_out | |
Chain 'portmapping_nas0_2_br_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_2_br_out | |
Chain 'portmapping_nas0_2_br_out' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_3_in | |
Chain 'portmapping_nas0_3_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_3_in | |
Chain 'portmapping_nas0_3_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_3_out | |
Chain 'portmapping_nas0_3_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_3_out | |
Chain 'portmapping_nas0_3_out' doesn't exist. | |
CMD: /bin/ebtables -N portmapping_input | |
CMD: /bin/ebtables -P portmapping_input RETURN | |
CMD: /bin/ebtables -A INPUT -j portmapping_input | |
CMD: /bin/ebtables -N portmapping_output | |
CMD: /bin/ebtables -P portmapping_output RETURN | |
CMD: /bin/ebtables -A OUTPUT -j portmapping_output | |
CMD: /bin/ebtables -N portmapping_service | |
CMD: /bin/ebtables -P portmapping_service RETURN | |
CMD: /bin/ebtables -A portmapping_service -p ipv4 --ip-proto udp --ip-dport 67:68 -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv4 --ip-proto igmp -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv4 --pkttype-type multicast -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv6 --ip6-proto udp --ip6-dport 546:547 -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:134 -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143 -j DROP | |
CMD: /bin/ebtables -A portmapping_service -p ipv6 --ip6-proto ! ipv6-icmp --pkttype-type multicast -j DROP | |
CMD: /bin/ebtables -N portmapping_special_lan4 | |
CMD: /bin/ebtables -P portmapping_special_lan4 RETURN | |
CMD: /bin/ebtables -A FORWARD -j portmapping_special_lan4 | |
CMD: /bin/ebtables -t broute -N portmapping_broute_special_lan4 | |
CMD: /bin/ebtables -t broute -P portmapping_broute_special_lan4 RETURN | |
CMD: /bin/ebtables -t broute -A BROUTING -j portmapping_broute_special_lan4 | |
CMD: /bin/ebtables -N portmapping | |
CMD: /bin/ebtables -P portmapping RETURN | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[8], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/ebtables -A FORWARD -j portmapping | |
CMD: /bin/ebtables -t broute -N portmapping_broute | |
CMD: /bin/ebtables -t broute -P portmapping_broute RETURN | |
CMD: /bin/ebtables -t broute -I BROUTING -j portmapping_broute | |
CMD: /bin/iptables -t mangle -N portmapping_rt_tbl | |
CMD: /bin/iptables -t mangle -A PREROUTING -j portmapping_rt_tbl | |
CMD: /bin/ip6tables -t mangle -N portmapping_rt_tbl | |
CMD: /bin/ip6tables -t mangle -A PREROUTING -j portmapping_rt_tbl | |
CMD: /bin/ebtables -F portmapping_nas0_0_in | |
Chain 'portmapping_nas0_0_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_0_in | |
Chain 'portmapping_nas0_0_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_0_out | |
Chain 'portmapping_nas0_0_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_0_out | |
Chain 'portmapping_nas0_0_out' doesn't exist. | |
CMD: /bin/ebtables -N portmapping_nas0_0_in | |
CMD: /bin/ebtables -P portmapping_nas0_0_in DROP | |
CMD: /bin/ebtables -N portmapping_nas0_0_out | |
CMD: /bin/ebtables -P portmapping_nas0_0_out DROP | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o eth0.2.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i eth0.2.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o eth0.2.0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i eth0.2.0 -j mark --mark-or 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o eth0.3.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i eth0.3.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o eth0.3.0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i eth0.3.0 -j mark --mark-or 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o eth0.4.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i eth0.4.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o eth0.4.0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i eth0.4.0 -j mark --mark-or 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan0 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan0-vap0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan0-vap0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan0-vap0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan0-vap0 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan0-vap1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan0-vap1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan0-vap1 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan0-vap1 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan0-vap2 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan0-vap2 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan0-vap2 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan0-vap2 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan0-vap3 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan0-vap3 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan0-vap3 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan0-vap3 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan1 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan1 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan1-vap0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan1-vap0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan1-vap0 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan1-vap0 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan1-vap1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan1-vap1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan1-vap1 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan1-vap1 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan1-vap2 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan1-vap2 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan1-vap2 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan1-vap2 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_in -o wlan1-vap3 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out -i wlan1-vap3 -j RETURN | |
CMD: /bin/ebtables -A portmapping_output -o wlan1-vap3 -d Multicast -j portmapping_nas0_0_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i wlan1-vap3 -j mark --set-mark 0x102000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_0_out --logical-in ! br+ --mark 0x0/0x7e000 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_0_out --mark 0x2000/0x7e000 -j RETURN | |
CMD: /bin/iptables -t mangle -A portmapping_rt_tbl -i ppp0 -j MARK --set-mark 0x2000/0x7e000 | |
CMD: /bin/ip6tables -t mangle -A portmapping_rt_tbl -i ppp0 -j MARK --set-mark 0x2000/0x7e000 | |
CMD: /bin/iptables -t mangle -A portmapping_rt_tbl -i nas0_0 -j MARK --set-mark 0x2000/0x7e000 | |
CMD: /bin/ip6tables -t mangle -A portmapping_rt_tbl -i nas0_0 -j MARK --set-mark 0x2000/0x7e000 | |
CMD: /bin/ebtables -F portmapping_nas0_1_in | |
Chain 'portmapping_nas0_1_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_1_in | |
Chain 'portmapping_nas0_1_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_1_out | |
Chain 'portmapping_nas0_1_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_1_out | |
Chain 'portmapping_nas0_1_out' doesn't exist. | |
CMD: /bin/ebtables -N portmapping_nas0_1_in | |
CMD: /bin/ebtables -P portmapping_nas0_1_in DROP | |
CMD: /bin/ebtables -N portmapping_nas0_1_out | |
CMD: /bin/ebtables -P portmapping_nas0_1_out DROP | |
CMD: /bin/ebtables -A portmapping_nas0_1_in -o eth0.5.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_1_out -i eth0.5.0 -j RETURN | |
CMD: /bin/ebtables -A portmapping_input -i eth0.5.0 -j portmapping_service | |
CMD: /bin/ebtables -A portmapping_output -o eth0.5.0 -j portmapping_service | |
CMD: /bin/ebtables -A portmapping_output -o eth0.5.0 -d Multicast -j portmapping_nas0_1_out | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i eth0.5.0 -j mark --mark-or 0x104000 --mark-target CONTINUE | |
mib_info_id: get mib info id failed! (id=546) | |
CMD: /bin/ebtables -A portmapping_nas0_1_out -i nas0_1 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_1_in -o nas0_1 -j RETURN | |
CMD: /bin/ebtables -A portmapping -i nas0_1 -j portmapping_nas0_1_in | |
CMD: /bin/ebtables -A portmapping -o nas0_1 -j portmapping_nas0_1_out | |
CMD: /bin/ebtables -A portmapping_input -i nas0_1 -j portmapping_service | |
CMD: /bin/ebtables -A portmapping_output -o nas0_1 -j portmapping_service | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i nas0_1 -j mark --mark-or 0x4000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_1_out --logical-in ! br+ --mark 0x0/0x7e000 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_1_out --mark 0x4000/0x7e000 -j RETURN | |
CMD: /bin/iptables -t mangle -A portmapping_rt_tbl -i nas0_1 -j MARK --set-mark 0x4000/0x7e000 | |
CMD: /bin/ip6tables -t mangle -A portmapping_rt_tbl -i nas0_1 -j MARK --set-mark 0x4000/0x7e000 | |
CMD: /bin/ebtables -F portmapping_nas0_2_br_in | |
Chain 'portmapping_nas0_2_br_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_2_br_in | |
Chain 'portmapping_nas0_2_br_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_2_br_out | |
Chain 'portmapping_nas0_2_br_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_2_br_out | |
Chain 'portmapping_nas0_2_br_out' doesn't exist. | |
CMD: /bin/ebtables -N portmapping_nas0_2_br_in | |
CMD: /bin/ebtables -P portmapping_nas0_2_br_in DROP | |
CMD: /bin/ebtables -N portmapping_nas0_2_br_out | |
CMD: /bin/ebtables -P portmapping_nas0_2_br_out DROP | |
mib_info_id: get mib info id failed! (id=546) | |
CMD: /bin/ebtables -A portmapping_nas0_2_br_out -i nas0_2_br -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_2_br_in -o nas0_2_br -j RETURN | |
CMD: /bin/ebtables -A portmapping -i nas0_2_br -j portmapping_nas0_2_br_in | |
CMD: /bin/ebtables -A portmapping -o nas0_2_br -j portmapping_nas0_2_br_out | |
CMD: /bin/ebtables -A portmapping_input -i nas0_2_br -j portmapping_service | |
CMD: /bin/ebtables -A portmapping_output -o nas0_2_br -j portmapping_service | |
CMD: /bin/ebtables -t broute -A portmapping_broute -i nas0_2_br -j mark --mark-or 0x6000 --mark-target CONTINUE | |
CMD: /bin/ebtables -A portmapping_nas0_2_br_out --logical-in ! br+ --mark 0x0/0x7e000 -j RETURN | |
CMD: /bin/ebtables -A portmapping_nas0_2_br_out --mark 0x6000/0x7e000 -j RETURN [prt] | |
backup failed ! net_connect returned -0x0052 | |
CMD: /bin/iptables -t mangle -A portmapping_rt_tbl -i nas0_2 -j MARK --set-mark 0x6000/0x7e000 | |
CMD: /bin/ip6tables -t mangle -A portmapping_rt_tbl -i nas0_2 -j MARK --set-mark 0x6000/0x7e000 | |
CMD: /bin/ebtables -F portmapping_nas0_3_in | |
Chain 'portmapping_nas0_3_in' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_3_in | |
Chain 'portmapping_nas0_3_in' doesn't exist. | |
CMD: /bin/ebtables -F portmapping_nas0_3_out | |
Chain 'portmapping_nas0_3_out' doesn't exist. | |
CMD: /bin/ebtables -X portmapping_nas0_3_out | |
[prt] getaddrinfo error[1], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
Chain 'portmapping_nas0_3_out' doesn't exist. | |
CMD: /bin/ebtables -N portmapping_nas0_3_in | |
CMD: /bin/ebtables -P portmapping_nas0_3_in DROP | |
CMD: /bin/ebtables -N portmapping_nas0_3_out | |
CMD: /bin/ebtables -P portmapping_nas0_3_out DROP | |
CMD: /bin/ebtables -F portmapping_nas0_3_in | |
CMD: /bin/ebtables -X portmapping_nas0_3_in | |
CMD: /bin/ebtables -F portmapping_nas0_3_out | |
CMD: /bin/ebtables -X portmapping_nas0_3_out | |
CMD: /bin/iptables -t mangle -A portmapping_rt_tbl -i nas0_3 -j MARK --set-mark 0x8000/0x7e000 | |
CMD: /bin/ip6tables -t mangle -A portmapping_rt_tbl -i nas0_3 -j MARK --set-mark 0x8000/0x7e000 | |
[setTmpBlockBridgeFloodPktRule 2646]restore RA in bridge fowward! | |
CMD: /bin/ebtables -D FORWARD -d Multicast -p IPV6 --ip6-protocol ipv6-icmp --ip6-icmp-type 134 -j DROP | |
CMD: /bin/ebtables -D portmapping_input -p ipv4 --ip-proto udp --mark 0x4000/0x7e000 --ip-dport 67:68 -j DROP | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -I portmapping_input -p ipv4 --ip-proto udp --mark 0x4000/0x7e000 --ip-dport 67:68 -j DROP | |
CMD: /bin/ebtables -D FORWARD -j lan_port_isolation | |
CMD: /bin/ebtables -F lan_port_isolation | |
CMD: /bin/ebtables -X lan_port_isolation | |
CMD: /bin/ebtables -N lan_port_isolation | |
CMD: /bin/ebtables -P lan_port_isolation RETURN | |
CMD: /bin/ebtables -A FORWARD -j lan_port_isolation | |
[prt] getaddrinfo error[2], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[3], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
random: crng init done | |
Created directory: /var/net-snmp | |
snmpd: send_trap: Failure in sendto (Network is unreachable) | |
snmpd: send_trap: Failure in sendto (Network is unreachable) | |
NET-SNMP version 5.7.3 | |
CMD: /bin/udhcpd -S /var/udhcpd/udhcpd.conf | |
Start udhcpd server! | |
Run Server function only | |
dhcpd server read configfile:poolname=default | |
[update_monitor_list_file:25271] process_name = udhcpd, action = 1 | |
Listening on Socket/br0 | |
Sending on Socket/br0 | |
[41;33m ===> Do flow flush <=== [0m | |
0 | |
0 | |
[prt] getaddrinfo error[4], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
CMD: /bin/boa | |
killall lanNetInforestart lanNetInfo CMD: /bin/lanNetInfo | |
rm: can't remove '/var/localtime': No such file or directory | |
[newDevcieInfoMsgInit 4777]:not find msg. | |
[newDevcieInfoMsgInit 4795]:init msg queue successfully | |
[initLanNetInfoData 3277]:init LanNetInfoData. | |
Illegal target name 'host_mib_postroute'. | |
Chain 'host_mib_postroute' doesn't exist. | |
CMD: /bin/vsntp -s ntp1.dlink.com -s asia.pool.ntp.org | |
CMD: /bin/sh -c echo 1 > /sys/class/net/br0/bridge/multicast_snooping | |
CMD: /bin/sh -c echo 2 > sys/devices/virtual/net/br0/bridge/multicast_router | |
CMD: /bin/sh -c echo 2 > /sys/devices/virtual/net/nas0_1/brport/multicast_router | |
getaddrinfo: Temporary failure in name resolution | |
connect ntp1.dlink.com: No such file or directory | |
getaddrinfo: Temporary failure in name resolution | |
connect asia.pool.ntp.org: No such file or directory | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+6 = 53 | |
ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -16 | |
voip flash server share size = 9456 | |
rcm_voip_get_ctype_interface | |
++++++The size of voipConfig 8740 | |
voip omci line state share size = 1400 | |
codec_suporrt_list 1279 | |
[VOIP disable DEBUG] | |
watch dog pipe mode | |
<bind_web_socket:380> socket:9, ip_ver:6, port:443 | |
CMD: /bin/iwpriv wlan0 flash_set xcap=69 | |
VoIP RCM LOG is ENABLED!! | |
Reset register status... | |
wlan0 flash_set:xcap=69 | |
CMD: /bin/iwpriv wlan0 flash_set thermalA=29 | |
wlan0 flash_set:thermalA=29 | |
CMD: /bin/iwpriv wlan0 flash_set thermalB=30 | |
wlan0 flash_set:thermalB=30 | |
CMD: /bin/iwpriv wlan0 flash_set thermalC=255 | |
wlan0 flash_set:thermalC=255 | |
<bind_web_socket:380> socket:10, ip_ver:6, port:80 | |
CMD: /bin/iwpriv wlan0 flash_set thermalD=255 | |
wlan0 flash_set:thermalD=255 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_cck_tssi_A=00f9f7fb0000 | |
wlan0 flash_set:2G_cck_tssi_A=00f9f7fb0000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_cck_tssi_B=00fc00000000 | |
wlan0 flash_set:2G_cck_tssi_B=00fc00000000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_cck_tssi_C=000000000000 | |
wlan0 flash_set:2G_cck_tssi_C=000000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_cck_tssi_D=00000dbg [rtw_mib_set][2271]antdiv=0 | |
0000000 | |
Authorize success(40:86:CB:72:F3:E1--40:86:CB:78:FE:70) | |
[start_check_license][dbg [rtw_mib_set][2271]ofdma_enable=0 | |
1445][MAC License Authorized Succeeded, Welcome!] | |
[dbg [rtw_mib_set][2271]txbf=1 | |
mac_license_status_set][1382][LicChdbg [rtw_mib_set][2271]txbf_auto_snd=1 | |
eckStat=3] | |
[mac_license_status_set][1387][Mib Set License Chechk Status = (3)] | |
sh: can't create /proc/dos_syslog: nonexistent directory | |
wlan0 flash_set:2G_cck_tssi_D=000000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_bw40_1s_tssi_A=00f9f8fa00 | |
wlan0 flash_set:2G_bw40_1s_tssi_A=00f9f8fa00 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_bw40_1s_tssi_B=00fbfeff00 | |
wlan0 flash_set:2G_bw40_1s_tssi_B=00fbfeff00 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_bw40_1s_tssi_C=0000000000 | |
wlan0 flash_set:2G_bw40_1s_tssi_C=0000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_bw40_1s_tssi_D=0000000000 | |
wlan0 flash_set:2G_bw40_1s_tssi_D=0000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_bw40_1s_tssi_A=060a0b060906080402060902fef6 | |
wlan0 flash_set:5G_bw40_1s_tssi_A=060a0b060906080402060902fef6 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_bw40_1s_tssi_B=ecf8fefd0506080604060a0602fc | |
wlan0 flash_set:5G_bw40_1s_tssi_B=ecf8fefd0506080604060a0602fc | |
CMD: /bin/iwpriv wlan0 flash_set 5G_bw40_1s_tssi_C=0000000000000000000000000000 | |
wlan0 flash_set:5G_bw40_1s_tssi_C=0000000000000000000000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_bw40_1s_tssi_D=0000000000000000000000000000 | |
wlan0 flash_set:5G_bw40_1s_tssi_D=0000000000000000000000000000 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_rx_gain_cck=0 | |
wlan0 flash_set:2G_rx_gain_cck=0 | |
CMD: /bin/iwpriv wlan0 flash_set 2G_rx_gain_ofdm=0 | |
wlan0 flash_set:2G_rx_gain_ofdm=0 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_rx_gain_low=253 | |
wlan0 flash_set:5G_rx_gain_low=253 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_rx_gain_mid=224 | |
wlan0 flash_set:5G_rx_gain_mid=224 | |
CMD: /bin/iwpriv wlan0 flash_set 5G_rx_gain_high=224 | |
wlan0 flash_set:5G_rx_gain_high=224 | |
CMD: /bin/iwpriv wlan0 flash_set para_path=/etc/conf/ | |
wlan0 flash_set:para_path=/etc/conf/ | |
CMD: /bin/iwpriv wlan0 set_mib antdiv=0 | |
CMD: /bin/sh -c echo 1 > /proc/net/rtk_wifi6/wlan0/coex_2g_40m | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan0/coex_2g_40m: nonexistent directory | |
CMD: /bin/iwpriv wlan0 set_mib ofdma_enable=0 | |
CMD: /bin/iwpriv wlan0 set_mib txbf=1 | |
CMD: /bin/iwpriv wlan0 set_mib txbf_auto_snd=1 | |
gen_hapd_cfg | |
[get_wifi_conf][492][if_idx = 0] ++ | |
config->encrypt=4 psk_enable=2 authtype=2 encmode=2 psk_format=0 gk_rekey=86400 | |
password | |
wpa_cipher=0x0 wpa2_cipher=0x2 enable_1x=0 | |
dot11IEEE80211W=1 enableSHA256=0 | |
sae_pwe=0 | |
[get_wifi_vif_conf][68][1] ++ | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 4f | |
VAP0: psk_enable=10 authtype=2 encmode=2 psk_format=0 gk_rekey=86400 | |
VAP0: 4kgeo9!*;zG84oAK)N4:]#;m_VGsF~ | |
VAP0: wpa_cipher=0x0 wpa2_cipher=0x2 enable_1x=0 | |
VAP0: dot11IEEE80211W=1 enableSHA256=0 | |
VAP0: sae_pwe=2 | |
[get_wifi_vif_conf][68][2] ++ | |
[get_wifi_vif_conf][68][3] ++ | |
[get_wifi_vif_conf][68][4] ++ | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
Generating VAP1 "wlan0-vap0" configuration | |
[set_hapd_cfg][4903] config get "wpa_psk" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wpa_pairwise" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key0" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key1" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key3" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_default_key" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key_len_broadcast" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key_len_unicast" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "own_ip_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "ieee8021x" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_port" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_shared_secret" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_port" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_shared_secret" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_addr2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_port2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_shared_secret2" fail or NO need to config this item | |
dbg [cfg80211_rtw_change_iface][2887]NOT call netdev_open in cfg80211_rtw_change_iface | |
[set_hapd_cfg][49PHL: RP agg is 121 for 640. | |
03] config get "aPHL: hal_cfg_fw_8852c : fw_en 1. | |
cct_server_addr2" fail or NO need tPHL: [MAC] Clear all bd index done. | |
o config this itePHL: [MAC] Downloading Chip HW ID: 2 | |
m | |
[set_hapd_cfg]PHL: [MAC] [FWDL] Query Internal FW Chip_ID = 0x2 | |
[4903] config getPHL: [MAC] [FWDL] Query Internal FW Cut = 0x1 | |
"acct_server_porPHL: [MAC] [FWDL] Query Internal FW cat = 0x2 | |
t2" fail or NO need to config this PHL: [MAC] 0x0000/0x0000 | |
item | |
[set_hapd_cfg][4903] config get "acct_server_shared_secret2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap_backhaul_ssid" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap_backhaul_wpa_psk" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multiPHL: hal_mac_print_fw_version: FW version V0.27.77.2, Ready | |
_ap_backhaul_wpa_PHL: ERROR _hal_mac_get_ofld_cap : disable fw ofld cmd! | |
passphrase" fail PHL: Set RX packet size filter to 8192B | |
or NO need to config this item | |
wlan0 VAP2 disabled | |
wlan0 VAP3 disabled | |
wlan0 VAP4 disabled | |
CMD: /bin/hostapd /var/hostapd.conf.wlan0 -s -g /var/run/hostapd/global.wlaPHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/PHY_REG.txt" (2865/27429) OK. | |
n0 -B -P /var/run/hostapd.pid.wlan0 | |
[prt] getaddrinfo error[5], res: No address associated with hostname, host: iot-auth-glPHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/PHY_REG_GAIN.txt" (673/10171) OK. | |
obal.aliyuncs.com, port: 443 | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RadioA.txt" (4087/34285) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RadioB.txt" (4021/33455) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/TXPWR_ByRate.txt" (136/3476) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/TXPWR_TrackTSSI.txt" (671/4326) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/TXPWR_LMT.txt" (4560/29886) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/PHY_REG.txt" (81/2250) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/PHY_REG_GAIN.txt" (353/5128) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/RadioA.txt" (257/2319) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/RadioB.txt" (257/2319) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/TXPWR_ByRate.txt" (136/3353) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/TXPWR_TrackTSSI.txt" (671/4167) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8852ce/RFE54/RTK66587_BPF/TXPWR_LMT.txt" (3040/22290) OK. | |
PHL: [MAC] band_idle_ck: cnt 2199, band 0, 0x0 | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000000, comp 0x00000000, comp ext 0x00000000. | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000002, comp 0x00000000, comp ext 0x00000000. | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000002, comp 0x00000004, comp ext 0x00000000. | |
PHL: rtw_hal_start: Get MAC(0xd200) ok!!! 0x00000000 | |
PHL: WARN power limit switching is available | |
PHL: Set regular_idx:2 (REGULATION_FCC) | |
PHL: Set MAC(0xd200) ok!!! 0x00000000 | |
PHL: Config role #0 of type 2. MBSSID: 0. | |
PHL: Initializing port 0 with 0 M-BSSID. | |
mask: 0x25000000, 0x00180005, 0x00000000, 0x00600000, 0x00000002 | |
dbg [netdev_br_init][2263]CONFIG_BR_EXT_BRNAME=br0 | |
dbg [netdev_br_init][2268]br_netdev->dev_addr=40:86:cb:76:4b:4d | |
[_netdev_open] change tx_mode form 0 to 0 | |
PHL: WARN wrole type(2) not change | |
br0: port 7(wlan0) entered blocking state | |
br0: port 7(wlan0) entered disabled state | |
device wlan0 entered promiscuous mode | |
PHL: Set RX packet size filter to 8192B | |
CMD: /bin/iwpriv wlan0 set_mib adbg [rtw_mib_set][2271]a4_enable=1 | |
4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
CMD: /bin/iwpriv wlan0 set_mib mudbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
ltiap_monitor_moddbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
e_disable=0 | |
CMD: /bin/iwpridbg [rtw_mib_set][2271]multiap_bss_type=32 | |
v wlan0 set_mib mdbg [core_mib_multiap_bss_type][526]32 1 | |
ultiap_bss_type=32 | |
CMD: /bin/idbg [rtw_mib_set][2271]powerpercent=100 | |
wpriv wlan0 set_mib powerpercent=10dbg [rtw_mib_set][2271]tx_mode=2 | |
0 | |
CMD: /bin/iwpriv wlan0 set_mib tx_mode=2 | |
CMD: /bin/sh -c cmd bb dtp 1 26 24 20 | |
[dtp]===> | |
PWRCTRL TxPWR for each LV = {26, 24, 20} | |
[setupWLan 6876]apdbg [get_all_cmd_para_str][10058]type=2 buf=max_enq_len,32768 para=000000007fcae046 num=0 | |
ply patch from stdbg [get_all_cmd_para_str][10058]type=2 buf=32768 para=000000008f2a5e98 num=1 | |
anley | |
CMD: /bdbg [core_cmd_txq][6789] | |
in/sh -c iwpriv wlan0 phl_test txq,max_enq_len,32768 | |
CMD: /bin/sh dbg [rtw_mib_set][2271]force_sta_wake=1 | |
-c iwpriv wlan0 set_mib force_sta_wake=1 | |
CMD: /bin/sh -c echo 0xffff > /proc/net/rtk_wifi6/wlan0/rate_ctl | |
CMD: /bin/sh -c echo 0 > /proc/net/rtk_wifi6/wlan0/deny_legacy | |
CMD: /bin/iwpriv wlan0-vap0 set_mib a4_enable=1 | |
wlan0-vap0 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap0 set_mib multiap_monitor_mode_disable=0 | |
wlan0-vap0 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap0 set_mib multiap_bss_type=32 | |
wlan0-vap0 no private ioctls. | |
CMD: /bin/sh -c echo 0xffff > /proc/net/rtk_wifi6/wlan0-vap0/rate_ctl | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan0-vap0/rate_ctl: nonexistent directory | |
CMD: /bin/iwpriv wlan0-vap0 set_mib band=204 | |
wlan0-vap0 no private ioctls. | |
CMD: /bin/sh -c echo 0 > /proc/net/rtk_wifi6/wlan0-vap0/deny_legacy | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan0-vap0/deny_legacy: nonexistent directory | |
CMD: /bin/hostapd_cli -a /var/hostapd_general_event.sh -B -P /var/run/hostapd_cli.pid.wlan0.general -i wlan0 | |
CMD: /bin/hostapd_cli -a /var/hostapd_general_event.sh -B -P /var/run/hostapd_cli.pid.wlan0-vap0.general -i wlan0-vap0 | |
CMD: /bin/hostapd_cli -a /var/hostapd_wps.sh -B -P /var/run/hostapd_cli.pid.wlan0.wps -i wlan0 | |
CMD: /bin/hostapd_cli -a /bin/lanNetInfo_action -B -P /var/run/hostapd_cli.pid.wlan0.lannetinfo -i wlan0 | |
CMD: /bin/hostapd_cli -a /bin/lanNetInfo_action -B -P /var/run/hostapd_cli.pid.wlan0-vap0.lannetinfo -i wlan0-vap0 | |
[prt] getaddrinfo error[6], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
No pgpgin line in /proc/vmstat | |
No pgpgout line in /proc/vmstat | |
No pswpin line in /proc/vmstat | |
No pswpout line in /proc/vmstat | |
[prt] getaddrinfo error[7], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
Reset register status... | |
[prt] getaddrinfo error[8], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
dbg [rtw_build_he_phy_caps][794]no RX stbc | |
dbg [rtw_ap_chbw_decision][6909]ifbmp=0x1 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][6952]ifbmp=0x1 cur: ch=36 bw=3 off=1, dec: ch=36 bw=3 off=1 | |
dbg [rtw_ap_chbw_decision][7093]ifbmp=0x1 cur: ch=36 bw=3 off=1, dec: ch=36 bw=3 off=1 | |
dbg [rtw_ap_chbw_decision][7232]ifbmp=0x1 cur: ch=36 bw=3 off=1, dec: ch=36 bw=3 off=1 | |
PHL: [MAC] band_idle_ck: cnt 2199, band 0, 0x8 | |
rtw_phl_ru_set_ch_bw: | |
PHL: [MAC] mac_set_bcn_ignore_edcca: port(0), mbssid(0 ms), band(0), en/dis(1) | |
br0: port 7(wlan0) entered blocking state | |
br0: port 7(wlan0) entered forwarding state | |
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready | |
PHL: WARN rtw_hal_bb_ra_update mac-id:0 not register RA | |
br0: port 8(wlan0-vap0) entered blocking state | |
br0: port 8(wlan0-vap0) entered disabled state | |
device wlan0-vap0 entered promiscuous mode | |
PHL: Creating VAP with M-BSSID 1. | |
PHL: Config role #1 of type 3. MBSSID: 1. | |
4 cpu | |
dbg [netdev_br_init][2263]CONFIG_BR_EXT_BRNAME=br0 | |
dbg [netdev_br_init][2268]br_netdev->dev_addr=40:86:cb:76:4b:4d | |
PHL: WARN wrole type(3) not change | |
dbg [rtw_mib_set][2271]func_off=0 | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
dbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
dbg [rtw_mib_set][2271]multiap_bss_type=32 | |
dbg [core_mib_multiap_bss_type][526]32 1 | |
dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
dbg [rtw_build_he_phy_caps][794]no RX stbc | |
dbg [rtw_ap_chbw_decision][6909]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][6952]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7033]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7081]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7232]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
PHL: [MAC] band_idle_ck: cnt 2199, band 0, 0x8 | |
PHL: [MAC] mac_set_bcn_ignore_edcca: port(0), mbssid(1 ms), band(0), en/dis(1) | |
br0: port 8(wlan0-vap0) entered blocking state | |
br0: port 8(wlan0-vap0) entered forwarding state | |
dbg [rtw_mib_set][2271]powerpercent=100 | |
VoIP: rcm_configuPHL: WARN rtw_hal_bb_ra_update mac-id:1 not register RA | |
re_restart | |
dbg [rtw_mib_set][2271]tx_mode=2 | |
[dtp]===> | |
PWRCTRL TxPWR for each LV = {26, 24, 20} | |
[setupWLan 6876]apply patch dbg [get_all_cmd_para_str][10058]type=2 buf=max_enq_len,32768 para=000000009db255cb num=0 | |
from stanley | |
dbg [get_all_cmd_para_str][10058]type=2 buf=32768 para=0000000043e5af0e num=1 | |
dbg [core_cmd_txq][6789] | |
dbg [rtw_mib_set][2271]force_sta_wake=1 | |
4 cpu | |
4 cpu | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
dbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
dbg [rtw_mib_set][2271]multiap_bss_type=32 | |
dbg [core_mib_multiap_bss_type][526]32 1 | |
dbg [rtw_mib_set][2271]band=204 | |
CMD: /bin/iwpriv wlan1 flash_set xcap=63 | |
wlan1 flash_set:xcap=63 | |
CMD: /bin/iwpriv wlan1 flash_set thermalA=27 | |
wlan1 flash_set:thermalA=27 | |
CMD: /bin/iwpriv wlan1 flash_set thermalB=27 | |
wlan1 flash_set:thermalB=27 | |
CMD: /bin/iwpriv wlan1 flash_set thermalC=255 | |
wlan1 flash_set:thermalC=255 | |
CMD: /bin/iwpriv wlan1 flash_set thermalD=255 | |
wlan1 flash_set:thermalD=255 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_cck_tssi_A=00f9f7fb0000 | |
wlan1 flash_set:2G_cck_tssi_A=00f9f7fb0000 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_cck_tssi_B=00fc00000000 | |
wlan1 flash_set:2G_cck_tssi_B=00fc00000000 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_cck_tssi_C=000000000000 | |
wlan1 flash_set:2G_cck_tssi_C=000000000000 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_cck_tssi_D=0000000000dbg [rtw_mib_set][2271]antdiv=0 | |
00 | |
wlan1 flash_set:2G_cck_tssi_D=000000000000 | |
CMD: /bin/iwpriv wlan1 flash_set dbg [rtw_mib_set][2271]ofdma_enable=0 | |
2G_bw40_1s_tssi_A=00f9f8fa00 | |
wlandbg [rtw_mib_set][2271]txbf=1 | |
1 flash_set:2G_bw40_1s_tssi_A=0dbg [rtw_mib_set][2271]txbf_auto_snd=1 | |
0f9f8fa00 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_bw40_1s_tssi_B=00fbfeff00 | |
wlan1 flash_set:2G_bw40_1s_tssi_B=00fbfeff00 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_bw40_1s_tssi_C=0000000000 | |
wlan1 flash_set:2G_bw40_1s_tssi_C=0000000000 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_bw40_1s_tssi_D=0000000000 | |
wlan1 flash_set:2G_bw40_1s_tssi_D=0000000000 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_bw40_1s_tssi_A=060a0b060906080402060902fef6 | |
wlan1 flash_set:5G_bw40_1s_tssi_A=060a0b060906080402060902fef6 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_bw40_1s_tssi_B=ecf8fefd0506080604060a0602fc | |
[prt] failed ! net_connect returned -0x0052 | |
[prt] ssl_disconnect | |
[1;31m[err](44635) httpclient_conn(76): httpclient_conn fail | |
[0m[1;31m[err](44635) httpclient_common(887): httpclient_connect is error, ret = -8 | |
[0m[1;31m[err](44636) guider_get_conn_info(1196): Request MQTT URL failed:-1 | |
[0m[1;31m[err](44636) iotx_guider_authenticate(1422): guider auth fail | |
[0mwlan1 flash_set:5G_bw40_1s_tssi_B=ecf8fefd0506080604060a0602fc | |
CMD: /bin/iwpriv wlan1 flash_set 5G_bw40_1s_tssi_C=0000000000000000000000000000 | |
wlan1 flash_set:5G_bw40_1s_tssi_C=0000000000000000000000000000 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_bw40_1s_tssi_D=0000000000000000000000000000 | |
wlan1 flash_set:5G_bw40_1s_tssi_D=0000000000000000000000000000 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_rx_gain_cck=0 | |
wlan1 flash_set:2G_rx_gain_cck=0 | |
CMD: /bin/iwpriv wlan1 flash_set 2G_rx_gain_ofdm=0 | |
wlan1 flash_set:2G_rx_gain_ofdm=0 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_rx_gain_low=253 | |
wlan1 flash_set:5G_rx_gain_low=253 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_rx_gain_mid=224 | |
wlan1 flash_set:5G_rx_gain_mid=224 | |
CMD: /bin/iwpriv wlan1 flash_set 5G_rx_gain_high=224 | |
wlan1 flash_set:5G_rx_gain_high=224 | |
CMD: /bin/iwpriv wlan1 flash_set para_path=/etc/conf/ | |
wlan1 flash_set:para_path=/etc/conf/ | |
CMD: /bin/iwpriv wlan1 set_mib antdiv=0 | |
CMD: /bin/sh -c echo 1 > /proc/net/rtk_wifi6/wlan1/coex_2g_40m | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan1/coex_2g_40m: nonexistent directory | |
CMD: /bin/iwpriv wlan1 set_mib ofdma_enable=0 | |
CMD: /bin/iwpriv wlan1 set_mib txbf=1 | |
CMD: /bin/iwpriv wlan1 set_mib txbf_auto_snd=1 | |
gen_hapd_cfg | |
[get_wifi_conf][492][if_idx = 1] ++ | |
config->encrypt=4 psk_enable=2 authtype=2 encmode=2 psk_format=0 gk_rekey=86400 | |
password | |
wpa_cipher=0x0 wpa2_cipher=0x2 enable_1x=0 | |
dot11IEEE80211W=1 enableSHA256=0 | |
sae_pwe=0 | |
[get_wifi_vif_conf][68][1] ++ | |
[1;33;46m<utility.c 1124 setup_mac_addr> [mmacAddr[5]+1 = 55 | |
VAP0: psk_enable=10 authtype=2 encmode=2 psk_format=0 gk_rekey=86400 | |
VAP0: BsH_pC(gdBMG0OFF5BK}dN?R7Km}ib | |
VAP0: wpa_cipher=0x0 wpa2_cipher=0x2 enable_1x=0 | |
VAP0: dot11IEEE80211W=1 enableSHA256=0 | |
VAP0: sae_pwe=2 | |
[get_wifi_vif_conf][68][2] ++ | |
[get_wifi_vif_conf][68][3] ++ | |
[get_wifi_vif_conf][68][4] ++ | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
cfg_mib_update_fn:4303 delay mib commit | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
[set_hapd_cfg][4867] config get fail or NO need to config this item | |
Generating VAP1 "wlan1-vap0" configuration | |
[set_hapd_cfg][4903] config get "wpa_psk" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wpa_pairwise" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key0" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key1" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key3" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_default_key" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key_len_broadcast" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "wep_key_len_unicast" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "own_ip_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "ieee8021x" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_port" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_shared_secret" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_addr" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_port" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_shared_secret" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_addr2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_port2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "auth_server_shared_secret2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_addr2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_port2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "acct_server_shared_secret2" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap" fail or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap_backhaul_ssid" fail or NO need to config this item | |
[set_hapd_cfg][4903] config dbg [cfg80211_rtw_change_iface][2887]NOT call netdev_open in cfg80211_rtw_change_iface | |
get "multi_ap_bacPHL: RP agg is 121 for 640. | |
khaul_wpa_psk" faPHL: hal_cfg_fw_8192xb : fw_en 1. | |
il or NO need to config this item | |
[set_hapd_cfg][4903] config get "multi_ap_backhaul_wpaPHL: [MAC] Clear all bd index done. | |
_passphrase" failPHL: [MAC] Downloading Chip HW ID: 3 | |
or NO need to coPHL: [MAC] [FWDL] Query Internal FW Chip_ID = 0x3 | |
nfig this item | |
VPHL: [MAC] [FWDL] Query Internal FW Cut = 0x0 | |
oIP RCM LOG is ENPHL: [MAC] [FWDL] Query Internal FW cat = 0x2 | |
ABLED!! | |
wlan1 PHL: [MAC] 0x0000/0x0000 | |
VAP2 disabled | |
wlan1 VAP3 disabled | |
wlan1 VAP4 disabled | |
CMD: /bin/hostapd /var/hostapd.conf.wlan1 -s -g /var/run/hostapd/global.wlan1 -B -P /var/run/hostapd.pid.wlan1 | |
Reset register status... | |
PHL: hal_mac_print_fw_version: FW version V0.27.77.0, Ready | |
PHL: ERROR _hal_mac_get_ofld_cap : disable fw ofld cmd! | |
PHL: Set RX packet size filter to 4096B | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/PHY_REG.txt" (2835/27249) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/PHY_REG_GAIN.txt" (257/3558) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RadioA.txt" (975/11111) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RadioB.txt" (813/9065) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/TXPWR_ByRate.txt" (94/2329) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/TXPWR_TrackTSSI.txt" (671/2487) OK. | |
PHL: _hal_dl_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/TXPWR_LMT.txt" (4452/24931) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/PHY_REG.txt" (101/1758) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/PHY_REG_GAIN.txt" (257/3603) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/RadioA.txt" (9/118) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/RadioB.txt" (9/118) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/TXPWR_ByRate.txt" (94/2317) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/TXPWR_TrackTSSI.txt" (671/3041) OK. | |
PHL: _hal_dl_ext_para_file:: Download file "/etc/conf/rtl8192xbe/RFE54/RTK66287/TXPWR_LMT.txt" (4452/24949) OK. | |
PHL: [MAC] band_idle_ck: cnt 2199, band 0, 0x0 | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000002, comp 0x00000004, comp ext 0x00000000. | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000002, comp 0x00000004, comp ext 0x00000000. | |
PHL: rtw_hal_mac_fw_log_cfg: level 4, output 0x00000002, comp 0x00000004, comp ext 0x00000000. | |
PHL: rtw_hal_start: Get MAC(0xd200) ok!!! 0x00000000 | |
PHL: WARN power limit switching is available | |
PHL: Set regular_idx:2 (REGULATION_FCC) | |
PHL: Set MAC(0xd200) ok!!! 0x00000000 | |
PHL: Config role #0 of type 2. MBSSID: 0. | |
PHL: Initializing port 0 with 0 M-BSSID. | |
mask: 0x25000000, 0x00180005, 0x00000000, 0x00600000, 0x00000002 | |
dbg [netdev_br_init][2263]CONFIG_BR_EXT_BRNAME=br0 | |
dbg [netdev_br_init][2268]br_netdev->dev_addr=40:86:cb:76:4b:4d | |
[_netdev_open] change tx_mode form 0 to 0 | |
PHL: WARN wrole type(2) not change | |
br0: port 9(wlan1) entered blocking state | |
br0: port 9(wlan1) entered disabled state | |
device wlan1 entered promiscuous mode | |
PHL: Set RX packet size filter to 4096B | |
CMD: /bin/iwpriv wlan1 set_mib adbg [rtw_mib_set][2271]a4_enable=1 | |
4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
CMD: /bin/iwpriv wlan1 set_mib mudbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
ltiap_monitor_moddbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
e_disable=0 | |
CMD: /bin/iwpridbg [rtw_mib_set][2271]multiap_bss_type=32 | |
v wlan1 set_mib mdbg [core_mib_multiap_bss_type][526]32 1 | |
ultiap_bss_type=32 | |
CMD: /bin/iwpriv wlan1 set_midbg [rtw_mib_set][2271]powerpercent=100 | |
b powerpercent=100 | |
CMD: /bin/idbg [rtw_mib_set][2271]tx_mode=2 | |
wpriv wlan1 set_mib tx_mode=2 | |
CMD: /bin/sh -c cmd1 bb dtp 1 26 24 20 | |
[dtp]===> | |
PWRCTRL TxPWR for each LV = {26, 24, 20} | |
[setupWLan 6876]apply patch dbg [get_all_cmd_para_str][10058]type=2 buf=max_enq_len,32768 para=00000000c98c3e5a num=0 | |
from stanley | |
dbg [get_all_cmd_para_str][10058]type=2 buf=32768 para=00000000a9ddb88c num=1 | |
CMD: /bin/sh -c idbg [core_cmd_txq][6789] | |
wpriv wlan1 phl_test txq,max_enq_len,32768 | |
CMD: /bin/sh -c iwpriv dbg [rtw_mib_set][2271]force_sta_wake=1 | |
wlan1 set_mib force_sta_wake=1 | |
CMD: /bin/sh -c iwpriv wlan1 phl_tedbg [get_all_cmd_para_str][10058]type=2 buf=tcpack_merge,1 para=000000009db255cb num=0 | |
st txq,tcpack_merdbg [get_all_cmd_para_str][10058]type=2 buf=1 para=0000000043e5af0e num=1 | |
ge,1 | |
dbg [core_cmd_txq][6789] | |
CMD: /bin/sh -c iwpriv wlan1 write 1,c08c,95 | |
CMD: /bin/iwpriv wlan1 set_mib codbg [rtw_mib_set][2271]coexist=1 | |
exist=1 | |
CMD: /bin/sh -c echo 0xffff > /proc/net/rtk_wifi6/wlan1/rate_ctl | |
CMD: /bin/sh -c echo 0 > /proc/net/rtk_wifi6/wlan1/deny_legacy | |
CMD: /bin/iwpriv wlan1-vap0 set_mib a4_enable=1 | |
wlan1-vap0 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap0 set_mib multiap_monitor_mode_disable=0 | |
wlan1-vap0 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap0 set_mib multiap_bss_type=32 | |
wlan1-vap0 no private ioctls. | |
CMD: /bin/sh -c echo 0xffff > /proc/net/rtk_wifi6/wlan1-vap0/rate_ctl | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan1-vap0/rate_ctl: nonexistent directory | |
CMD: /bin/iwpriv wlan1-vap0 set_mib band=139 | |
wlan1-vap0 no private ioctls. | |
CMD: /bin/sh -c echo 0 > /proc/net/rtk_wifi6/wlan1-vap0/deny_legacy | |
/bin/sh: can't create /proc/net/rtk_wifi6/wlan1-vap0/deny_legacy: nonexistent directory | |
CMD: /bin/hostapd_cli -a /var/hostapd_general_event.sh -B -P /var/run/hostapd_cli.pid.wlan1.general -i wlan1 | |
CMD: /bin/hostapd_cli -a /var/hostapd_general_event.sh -B -P /var/run/hostapd_cli.pid.wlan1-vap0.general -i wlan1-vap0 | |
CMD: /bin/hostapd_cli -a /var/hostapd_wps.sh -B -P /var/run/hostapd_cli.pid.wlan1.wps -i wlan1 | |
CMD: /bin/hostapd_cli -a /bin/lanNetInfo_action -B -P /var/run/hostapd_cli.pid.wlan1.lannetinfo -i wlan1 | |
CMD: /bin/hostapd_cli -a /bin/lanNetInfo_action -B -P /var/run/hostapd_cli.pid.wlan1-vap0.lannetinfo -i wlan1-vap0 | |
[1;31m[err](46609) _mqtt_connect(288): mqtt connect failed | |
[0m[1;31m[err](46609) _iotx_linkkit_master_connect(1480): DM Start Failed | |
[0m[1;32;40m_linkkit_init.305: IOT_Linkkit_Connect failed, retry after 30s... | |
[0m | |
Open file /var/run/dhcpcV6.leases.ppp0 fail ! | |
dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
dbg [rtw_build_he_phy_caps][794]no RX stbc | |
dbg [rtw_ap_chbw_decision][6909]ifbmp=0x1 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][6952]ifbmp=0x1 cur: ch=1 bw=0 off=0, dec: ch=1 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7093]ifbmp=0x1 cur: ch=1 bw=0 off=0, dec: ch=1 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7232]ifbmp=0x1 cur: ch=1 bw=0 off=0, dec: ch=1 bw=0 off=0 | |
rtw_phl_ru_set_ch_bw: | |
PHL: [MAC] mac_set_bcn_ignore_edcca: port(0), mbssid(0 ms), band(0), en/dis(1) | |
br0: port 9(wlan1) entered blocking state | |
br0: port 9(wlan1) entered forwarding state | |
PHL: WARN rtw_hal_bb_ra_update mac-id:0 not register RA | |
br0: port 10(wlan1-vap0) entered blocking state | |
br0: port 10(wlan1-vap0) entered disabled state | |
device wlan1-vap0 entered promiscuous mode | |
PHL: Creating VAP with M-BSSID 1. | |
PHL: Config role #1 of type 3. MBSSID: 1. | |
4 cpu | |
dbg [netdev_br_init][2263]CONFIG_BR_EXT_BRNAME=br0 | |
dbg [netdev_br_init][2268]br_netdev->dev_addr=40:86:cb:76:4b:4d | |
PHL: WARN wrole type(3) not change | |
dbg [rtw_mib_set][2271]func_off=0 | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
dbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
dbg [rtw_mib_set][2271]multiap_bss_type=32 | |
dbg [core_mib_multiap_bss_type][526]32 1 | |
dbg [rtw_build_he_phy_caps][782]force enable RX ldpc | |
dbg [rtw_build_he_phy_caps][794]no RX stbc | |
dbg [rtw_ap_chbw_decision][6909]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][6952]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7033]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7081]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
dbg [rtw_ap_chbw_decision][7232]ifbmp=0x2 cur: ch=0 bw=0 off=0, dec: ch=0 bw=0 off=0 | |
PHL: [MAC] mac_set_bcn_ignore_edcca: port(0), mbssid(1 ms), band(0), en/dis(1) | |
br0: port 10(wlan1-vap0) entered blocking state | |
br0: port 10(wlan1-vap0) entered forwarding state | |
dbg [rtw_mib_set][2271]powerpercent=100 | |
PHL: WARN rtw_hal_bb_ra_update mac-id:1 not register RA | |
dbg [rtw_mib_set][2271]tx_mode=2 | |
[dtp]===> | |
PWRCTRL TxPWR for each LV = {26, 24, 20} | |
[setupWLan 6876]apply patch dbg [get_all_cmd_para_str][10058]type=2 buf=max_enq_len,32768 para=000000000d8dea36 num=0 | |
from stanley | |
dbg [get_all_cmd_para_str][10058]type=2 buf=32768 para=00000000388508d8 num=1 | |
dbg [core_cmd_txq][6789] | |
dbg [rtw_mib_set][2271]force_sta_wake=1 | |
dbg [get_all_cmd_para_str][10058]type=2 buf=tcpack_merge,1 para=00000000dae42d59 num=0 | |
dbg [get_all_cmd_para_str][10058]type=2 buf=1 para=000000008c6df590 num=1 | |
dbg [core_cmd_txq][6789] | |
dbg [rtw_mib_set][2271]coexist=1 | |
4 cpu | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
dbg [core_mib_a4_enable][382]oper=1 value=1 | |
dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
dbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
dbg [rtw_mib_set][2271]multiap_bss_type=32 | |
dbg [core_mib_multiap_bss_type][526]32 1 | |
dbg [rtw_mib_set][2271]band=139 | |
CMD: /bin/ebtables -F wlan_block | |
CMD: /bin/ebtables -A wlan_block -i wlan0-vxd -o wlan1-vxd -j DROP | |
CMD: /bin/ebtables -A wlan_block -i wlan1-vxd -o wlan0-vxd -j DROP | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
CMD: /bin/iwprdbg [core_mib_a4_enable][382]oper=1 value=1 | |
iv wlan0 set_mib a4_enable=1 | |
Cdbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
MD: /bin/iwpriv wdbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
lan0 set_mib multiap_monitor_mode_ddbg [rtw_mib_set][2271]multiap_bss_type=32 | |
isable=0 | |
CMDdbg [core_mib_multiap_bss_type][526]32 1 | |
: /bin/iwpriv wlan0 set_mib multiap_bss_type=32 | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
CMD: /bin/iwpriv dbg [core_mib_a4_enable][382]oper=1 value=1 | |
wlan0-vap0 set_mib a4_enable=1 | |
dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
CMD: /bin/iwprivdbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
wlan0-vap0 set_mib multiap_monitordbg [rtw_mib_set][2271]multiap_bss_type=32 | |
_mode_disable=0 | |
dbg [core_mib_multiap_bss_type][526]32 1 | |
CMD: /bin/iwpriv wlan0-vap0 set_mib multiap_bss_type=32 | |
CMD: /bin/iwpriv wlan0-vap1 set_mib a4_enable=1 | |
wlan0-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap1 set_mib multiap_monitor_mode_disable=0 | |
wlan0-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap1 set_mib multiap_bss_type=32 | |
wlan0-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap2 set_mib a4_enable=1 | |
wlan0-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap2 set_mib multiap_monitor_mode_disable=0 | |
wlan0-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap2 set_mib multiap_bss_type=32 | |
wlan0-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap3 set_mib a4_enable=1 | |
wlan0-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap3 set_mib multiap_monitor_mode_disable=0 | |
wlan0-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vap3 set_mib multiap_bss_type=32 | |
wlan0-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan0-vxd set_mib a4_enable=1 | |
wlan0-vxd no private ioctls. | |
CMD: /bin/iwpriv wlan0-vxd set_mib multiap_monitor_mode_disable=0 | |
wlan0-vxd no private ioctls. | |
CMD: /bin/iwpriv wlan0-vxd set_mib multiap_bss_type=32 | |
wlan0-vxd no private ioctls. | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
CMD: /bin/iwprdbg [core_mib_a4_enable][382]oper=1 value=1 | |
iv wlan1 set_mib a4_enable=1 | |
Cdbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
MD: /bin/iwpriv wdbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
lan1 set_mib multiap_monitor_mode_ddbg [rtw_mib_set][2271]multiap_bss_type=32 | |
isable=0 | |
CMDdbg [core_mib_multiap_bss_type][526]32 1 | |
: /bin/iwpriv wlan1 set_mib multiap_bss_type=32 | |
dbg [rtw_mib_set][2271]a4_enable=1 | |
CMD: /bin/iwpriv dbg [core_mib_a4_enable][382]oper=1 value=1 | |
wlan1-vap0 set_mib a4_enable=1 | |
CMD: /bin/iwpriv dbg [rtw_mib_set][2271]multiap_monitor_mode_disable=0 | |
wlan1-vap0 set_midbg [core_mib_multiap_monitor_mode_disable][435]oper=1 value=0 | |
b multiap_monitor_mode_disable=0 | |
dbg [rtw_mib_set][2271]multiap_bss_type=32 | |
CMD: /bin/iwprdbg [core_mib_multiap_bss_type][526]32 1 | |
iv wlan1-vap0 set_mib multiap_bss_type=32 | |
CMD: /bin/iwpriv wlan1-vap1 set_mib a4_enable=1 | |
wlan1-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap1 set_mib multiap_monitor_mode_disable=0 | |
wlan1-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap1 set_mib multiap_bss_type=32 | |
wlan1-vap1 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap2 set_mib a4_enable=1 | |
wlan1-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap2 set_mib multiap_monitor_mode_disable=0 | |
wlan1-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap2 set_mib multiap_bss_type=32 | |
wlan1-vap2 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap3 set_mib a4_enable=1 | |
wlan1-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap3 set_mib multiap_monitor_mode_disable=0 | |
wlan1-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vap3 set_mib multiap_bss_type=32 | |
wlan1-vap3 no private ioctls. | |
CMD: /bin/iwpriv wlan1-vxd set_mib a4_enable=1 | |
wlan1-vxd no private ioctls. | |
CMD: /bin/iwpriv wlan1-vxd set_mib multiap_monitor_mode_disable=0 | |
wlan1-vxd no private ioctls. | |
CMD: /bin/iwpriv wlan1-vxd set_mib multiap_bss_type=32 | |
wlan1-vxd no private ioctls. | |
Multi_AP_Service is starting, profile number is : 2 | |
dbg [rtw_mib_set][2271]multiap_ext_cmd=1 | |
dbg [core_mib_multiap_ext_cmd][497]oper=1 value=0 | |
dbg [core_mib_multiap_ext_cmd][500]set rtw_map_user_pid from 0 to 0 | |
dbg [rtw_mib_set][2271]multiap_ext_cmd=1 | |
dbg [core_mib_multiap_ext_cmd][497]oper=1 value=0 | |
dbg [core_mib_multiap_ext_cmd][500]set rtw_map_user_pid from 0 to 0 | |
CMD: /bin/ebtables -N wlan_map_block -P RETURN | |
CMD: /bin/ebtables -D FORWARD -j wlan_map_block | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -I FORWARD -j wlan_map_block | |
CMD: /bin/ebtables -N map_portmapping -P RETURN | |
CMD: /bin/ebtables -D FORWARD -j map_portmapping | |
Sorry, rule does not exist. | |
CMD: /bin/ebtables -A FORWARD -j map_portmapping | |
CMD: /bin/ebtables -F wlan_map_block | |
CMD: /bin/ebtables -A wlan_map_block -d 01:80:c2:00:00:13 -j DROP | |
CMD: /bin/wlan_manager -config_fname /var/wlan_manager.conf | |
[WLAN_MANAGER] config: /var/wlan_manager.conf. | |
[WLAN_MANAGER] v2.0. | |
CMD: /bin/iptables -F tr069 | |
CMD: /bin/ip6tables -F ipv6_tr069 | |
CMD: /bin/iptables -A tr069 ! -i nas0_3 -p tcp --dport 8082 -j DROP | |
CMD: /bin/ip6tables -A ipv6_tr069 ! -i nas0_3 -p TCP --dport 8082 -j DROP | |
CMD: /bin/ip6tables -A ipv6_tr069 -i nas0_3 -p TCP --dport 8082 -j ACCEPT | |
CMD: /bin/cwmpClient | |
sh: can't create /proc/br_igmpsnoop: nonexistent directory | |
sh: can't create /proc/br_igmpquery: nonexistent directory | |
sh: can't create /proc/br_mldsnoop: nonexistent directory | |
sh: can't create /proc/br_mldquery: nonexistent directory | |
cwmp_flag=30 | |
<main.c>Set No Debug Message! | |
IGMP Snooping: enabled | |
MLD Snooping: enabled | |
CMD: /bin/ebtables -D br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -D br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -F BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -X BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -N BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -P BR_IGMP_MLD_DROP RETURN | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o eth+ -j DROP | |
<cwmp_utility.c>Set No Debug Message[1] | |
<main.c>Set Delay! | |
<cwmp_utility.c>Set Delay[4] | |
<cwmp_utility.c>Set gUseTR-181[1] | |
<cwmp_utility.c>Set gPrintSoap[0] | |
<cwmp_utility.c>Set gsupportPOST[0] | |
<cwmp_utility.c>Set gRandomInform[0] | |
<cwmp_utility.c>Set gLibUseIpv6[1] | |
<cwmp_utility.c>Set gEnableTimeZone[1] | |
<main.c,191>[cwmp]begin handle signal thread | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i eth+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o eth+ -j DROP | |
CMD: /bin/ebtables -A BR_IGMP_MLD_DROP -i wlan+ -o wlan+ -j DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv4 --ip-proto igmp -j BR_IGMP_MLD_DROP | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 143:143/0:255 -j BR_IGMP_MLD_DROP | |
<cwmp_solarInit:24>INFO: Prepare to init maserati listener. | |
[update_monitor_list_file:25271] process_name = cwmpClient, action = 1 | |
<cwmp_solarListener:46>INFO: Start maserati event listener thread. | |
enter cwmp_main! | |
Root is Device:2. | |
Start cwmp_main() ! | |
========== CWMP library ========== | |
2a7573c4 | |
Mon Nov 20 20:23:31 2023 +0800 | |
[cwmp][stun] Fix memory leak. | |
Build time: 20240114_18:40:55 | |
================================== | |
<port_update_CWMP_diagnose_status:5032> diagnose_type = 1, status_code = 0 | |
CMD: /bin/ebtables -A br_lan_forward -p IPv6 --ip6-proto ipv6-icmp --ip6-icmp-type 130:132/0:255 -j BR_IGMP_MLD_DROP | |
subr_qos_3.c: setupIPQ 6839 | |
[setupLanItfMap:812] lan_itf_map.map[1].name:eth0.2.0 | |
[setupLanItfMap:812] lan_itf_map.map[2].name:eth0.3.0 | |
[setupLanItfMap:812] lan_itf_map.map[3].name:eth0.4.0 | |
[setupLanItfMap:812] lan_itf_map.map[4].name:eth0.5.0 | |
[setupLanItfMap:829] lan_itf_map.map[5].name:wlan0 | |
[setupLanItfMap:829] lan_itf_map.map[6].name:wlan0-vap0 | |
[setupLanItfMap:829] lan_itf_map.map[7].name:wlan1 | |
[setupLanItfMap:829] lan_itf_map.map[8].name:wlan1-vap0 | |
subr_qos_3.c: setupDefaultQdisc 6660 | |
CMD: tc qdisc add dev nas0_0 root handle 1: prio | |
CMD: tc qdisc add dev nas0_1 root handle 1: prio | |
CMD: tc qdisc add dev nas0_2 root handle 1: prio | |
CMD: tc qdisc add dev nas0_3 root handle 1: prio | |
[1;33;46m<subr_qos_3.c 6937 setupIPQ> [mConfig QoS total upstream 32767999 Kbps downstream 32767999 Kbps | |
[1;33;46m<fc_api.c 3815 rtk_fc_total_upstream_bandwidth_set> [mbandwidth=32767999 | |
[1;33;46m<fc_api.c 3851 rtk_fc_total_downstream_bandwidth_set> [mbandwidth=32767999 | |
init_maxBandwidth 21725 internetWanName=ppp0 | |
CMD: /bin/tc qdisc del dev ppp0 root | |
RTNETLINK answers: No such file or directory | |
CMD: /bin/ebtables -t nat -D PREROUTING -j lanhost_ratelimit_preroute | |
Illegal target name 'lanhost_ratelimit_preroute'. | |
CMD: /bin/ebtables -t nat -X lanhost_ratelimit_preroute | |
Chain 'lanhost_ratelimit_preroute' doesn't exist. | |
CMD: /bin/ebtables -t nat -D POSTROUTING -j lanhost_ratelimit_postroute | |
Illegal target name 'lanhost_ratelimit_postroute'. | |
CMD: /bin/ebtables -t nat -X lanhost_ratelimit_postroute | |
Chain 'lanhost_ratelimit_postroute' doesn't exist. | |
CMD: /bin/iptables -t mangle -D PREROUTING -j lanhost_ratelimit_preroute | |
iptables v1.4.18: Couldn't load target `lanhost_ratelimit_preroute':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t mangle -F lanhost_ratelimit_preroute | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t mangle -X lanhost_ratelimit_preroute | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ebtables -t nat -D PREROUTING -j lanhost_ratelimit_preroute | |
Illegal target name 'lanhost_ratelimit_preroute'. | |
CMD: /bin/ebtables -t nat -X lanhost_ratelimit_preroute | |
Chain 'lanhost_ratelimit_preroute' doesn't exist. | |
CMD: /bin/ebtables -t nat -D POSTROUTING -j lanhost_ratelimit_postroute | |
Illegal tarloop_eth_type=0xfffa | |
get name 'lanhost_ratelimit_postroute'. | |
CMD: /bin/ebtables -t nat -X lanhost_ratelimit_postroute | |
Chain 'lanhost_ratelimit_postroute' doesn't exist. | |
CMD: /bin/iptables -t mangle -D PREROUTING -j lanhost_ratelimit_preroute | |
iptables v1.4.18: Couldn't load target `lanhost_ratelimit_preroute':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t mangle -F lanhost_ratelimit_preroute | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t mangle -X lanhost_ratelimit_preroute | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ebtables -t nat -N lanhost_ratelimit_penable loopback detect | |
reroute | |
CMD: /bin/ebtables -t nat -P lanhost_ratelimit_preroute RETURN | |
CMD: /bin/ebtables -t nat -I PREROUTING -j lanhost_ratelimit_preroute | |
CMD: /bin/ebtables -t nat -N lanhost_ratelimit_postroute | |
CMD: /bin/ebtables -t nat -P lanhost_ratelimit_postroute RETURN | |
CMD: /bin/ebtables -t nat -I POSTROUTING -j lanhost_ratelimit_postroute | |
CMD: /bin/sysconf send_unix_sock_message /var/run/systemd.usock do_flow_flush 8 | |
CMD: /bin/iptables -t mangle -D POSTROUTING -p tcp --tcp-flags ALL ACK -m length --length 40:84 -m conntrack --ctstate ESTABLISHED -j TCP_SMALLACK_PROTECT | |
iptables v1.4.18: Couldn't load target `TCP_SMALLACK_PROTECT':No such file or directory | |
Try `iptables -h' or 'iptables --help' for more information. | |
CMD: /bin/iptables -t mangle -F TCP_SMALLACK_PROTECT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/iptables -t mangle -X TCP_SMALLACK_PROTECT | |
iptables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -t mangle -D POSTROUTING -p tcp --tcp-flags ALL ACK -m length --length 60:104 -m conntrack --ctstate ESTABLISHED -j TCP_SMALLACK_PROTECT | |
ip6tables v1.4.18: Couldn't load target `TCP_SMALLACK_PROTECT':No such file or directory | |
Try `ip6tables -h' or 'ip6tables --help' for more information. | |
CMD: /bin/ip6tables -t mangle -F TCP_SMALLACK_PROTECT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/ip6tables -t mangle -X TCP_SMALLACK_PROTECT | |
ip6tables: No chain/target/match by that name. | |
CMD: /bin/sh -c echo 0x0 > /proc/fc/ctrl/flow_swFwded_aclTrapPri_mask | |
CMD: /bin/sh -c echo mode kernel > /proc/fc/ctrl/flow_delay | |
CMD: /bin/sh -c echo count 10 > /proc/fc/ctrl/flow_delay | |
CMD: /bin/sysconf send_unix_sock_message /var/run/systemd.usock do_flow_flush 8 | |
[rtk_fw_dos_set 3135] ret = 13 | |
echo "4 1 2 3" > /proc/sys/loopback_detect/lan_port_remapping | |
CMD: /bin/smuxctl --if eth0.2 --rx --tags 1 --rule-remove-alias eth0.2-rx-loopdetect+ | |
CMD: /bin/smuxctl --if eth0.3 --rx --tags 1 --rule-remove-alias eth0.3-rx-loopdetect+ | |
CMD: /bin/smuxctl --if eth0.4 --rx --tags 1 --rule-remove-alias eth0.4-rx-loopdetect+ | |
CMD: /bin/smuxctl --if eth0.5 --rx --tags 1 --rule-remove-alias eth0.5-rx-loopdetect+ | |
echo 0xfffa > /proc/loopback_detect_ethtype | |
CMD: /bin/loopback | |
[stop_upnp:21759] Stop miniupnpd! (wanIf=ppp0) | |
CMD: /bin/upnpctrl down ppp0 br0 | |
loopback: LoopExistPeriod = 5 | |
loopback: LoopCancelPeriod = 300 | |
loopback: EthernetType = 0xFFFA | |
loopback: vid = untagged | |
total 1 vlan values | |
upnpctrl(down): MINIUPNPD did not start! | |
CMD: /bin/crond | |
Send signal to snmpd. | |
Subtrees for Context: | |
02 .0 - .1 | |
02 .1 - .1.3.6.1.2.1.1.1 | |
02 .1.3.6.1.2.1.1.1 - .1.3.6.1.2.1.1.2 | |
mibII/sysDescr mibII/sysDescr 0x2d2827a0 | |
CMD: /bin/sysconf send_unix_sock_message /var/run/systemd.usock 02 .1.3.6.1.2.1.1.2 - .1.3.6.1.2.1.1.3 | |
do_LanV6Server mibII/sysObjectID mibII/sysObjectID 0x2d283720 | |
restart | |
02 .1.3.6.1.2.1.1.3 - .1.3.6.1.2.1.1.4 | |
mibII/sysUpTime mibII/sysUpTime 0x2d284080 | |
02 .1.3.6.1.2.1.1.4 - .1.3.6.1.2.1.1.5 | |
mibII/sysContact mibII/sysContact 0x2d284460 | |
02 .1.3.6.1.2.1.1.5 - .1.3.6.1.2.1.1.6 | |
mibII/sysName mibII/sysName 0x2d284bc0 | |
02 .1.3.6.1.2.1.1.6 - .1.3.6.1.2.1.1.7 | |
mibII/sysLocation mibII/sysLocation 0x2d2853e0 | |
02 .1.3.6.1.2.1.1.7 - .1.3.6.1.2.1.1.8 | |
mibII/sysServices mibII/sysServices 0x2d285ca0 | |
02 .1.3.6.1.2.1.1.8 - .1.3.6.1.2.1.1.9 | |
mibII/sysORLastChange mibII/sysORLastChange 0x2d286e00 | |
02 .1.3.6.1.2.1.1.9 - .1.3.6.1.2.1.1.10 | |
mibII/sysORTable mibII/sysORTable 0x2d2875b0 | |
02 .1.3.6.1.2.1.1.10 - .1.3.6.1.2.1.2.1 | |
02 .1.3.6.1.2.1.2.1 - .1.3.6.1.2.1.2.2 | |
if number if number 0x2d2db200 | |
02 .1.3.6.1.2.1.2.2 - .1.3.6.1.2.1.2.3 | |
ifTable ifTable 0x2d2d5810 | |
02 .1.3.6.1.2.1.2.3 - .1.3.6.1.2.1.3.1.1.1 | |
02 .1.3.6.1.2.1.3.1.1.1 - .1.3.6.1.2.1.3.1.1.2 | |
mibII/at mibII/at 0x2d2b5880 | |
02 .1.3.6.1.2.1.3.1.1.2 - .1.3.6.1.2.1.3.1.1.3 | |
mibII/at mibII/at 0x2d2b61b0 | |
do_restartLanV6Server - 505 | |
4 cpu | |
do_cleanLanV6Server - 619 | |
02 .1.3.6.1.2.1.3.1.1.3 - .1.3.6.1.2.1.3.1.1.4 | |
mibII/at mibII/at 0x2d2b6850 | |
02 .1.3.6.1.2.1.3.1.1.4 - .1.3.6.1.2.1.4 | |
02 .1.3.6.1.2.1.4 - .1.3.6.1.2.1.4.20.1.1 | |
ip ip 0x2d28e800 | |
02 .1.3.6.1.2.1.4.20.1.1 - .1.3.6.1.2.1.4.20.1.2 | |
mibII/ipaddr mibII/ipaddr 0x2d28f260 | |
ip ip 0x2d28f730 | |
02 .1.3.6.1.2.1.4.20.1.2 - .1.3.6.1.2.1.4.20.1.3 | |
mibII/ipaddr mibII/ipaddr 0x2d290630 | |
ip ip 0x2d28ff40 | |
02 .1.3.6.1.2.1.4.20.1.3 - .1.3.6.1.2.1.4.20.1.4 | |
mibII/ipaddr mibII/ipaddr 0x2d291210 | |
ip ip 0x2d290b20 | |
02 .1.3.6.1.2.1.4.20.1.4 - .1.3.6.1.2.1.4.20.1.5 | |
mibII/ipaddr mibII/ipaddr 0x2d291df0 | |
ip ip 0x2d291700 | |
02 .1.3.6.1.2.1.4.20.1.5 - .1.3.6.1.2.1.4.20.1.6 | |
mibII/ipaddr mibII/ipaddr 0x2d2929d0 | |
ip ip 0x2d2922e0 | |
02 .1.3.6.1.2.1.4.20.1.6 - .1.3.6.1.2.1.4.21.1.1 | |
ip ip 0x2d292ec0 | |
02 .1.3.6.1.2.1.4.21.1.1 - .1.3.6.1.2.1.4.21.1.2 | |
mibII/iproute mibII/iproute 0x2d2935b0 | |
ip ip 0x2d293aa0 | |
02 .1.3.6.1.2.1.4.21.1.2 - .1.3.6.1.2.1.4.21.1.3 | |
mibII/iproute mibII/iproute 0x2d294980 | |
ip ip 0x2d294290 | |
02 .1.3.6.1.2.1.4.21.1.3 - .1.3.6.1.2.1.4.21.1.4 | |
mibII/iproute mibII/iproute 0x2d295560 | |
ip ip 0x2d294e70 | |
02 .1.3.6.1.2.1.4.21.1.4 - .1.3.6.1.2.1.4.21.1.5 | |
mibII/iproute mibII/iproute 0x2d296140 | |
ip ip 0x2d295a50 | |
02 .1.3.6.1.2.1.4.21.1.5 - .1.3.6.1.2.1.4.21.1.6 | |
mibII/iproute mibII/iproute 0x2d296d20 | |
ip ip 0x2d296630 | |
02 .1.3.6.1.2.1.4.21.1.6 - .1.3.6.1.2.1.4.21.1.7 | |
mibII/iproute mibII/iproute 0x2d297900 | |
ip ip 0x2d297210 | |
02 .1.3.6.1.2.1.4.21.1.7 - .1.3.6.1.2.1.4.21.1.8 | |
mibII/iproute mibII/iproute 0x2d2984e0 | |
ip ip 0x2d297df0 | |
02 .1.3.6.1.2.1.4.21.1.8 - .1.3.6.1.2.1.4.21.1.9 | |
mibII/iproute mibII/iproute 0x2d2990c0 | |
ip ip 0x2d2989d0 | |
02 .1.3.6.1.2.1.4.21.1.9 - .1.3.6.1.2.1.4.21.1.10 | |
mibII/iproute mibII/iproute 0x2d299ca0 | |
ip ip 0x2d2995b0 | |
02 .1.3.6.1.2.1.4.21.1.10 - .1.3.6.1.2.1.4.21.1.11 | |
mibII/iproute mibII/iproute 0x2d29a880 | |
ip ip 0x2d29a190 | |
02 .1.3.6.1.2.1.4.21.1.11 - .1.3.6.1.2.1.4.21.1.12 | |
mibII/iproute mibII/iproute 0x2d29b460 | |
ip ip 0x2d29ad70 | |
02 .1.3.6.1.2.1.4.21.1.12 - .1.3.6.1.2.1.4.21.1.13 | |
mibII/iproute mibII/iproute 0x2d29c040 | |
ip ip 0x2d29b950 | |
02 .1.3.6.1.2.1.4.21.1.13 - .1.3.6.1.2.1.4.21.1.14 | |
mibII/iproute mibII/iproute 0x2d29cc20 | |
ip ip 0x2d29c530 | |
02 .1.3.6.1.2.1.4.21.1.14 - .1.3.6.1.2.1.4.22.1.1 | |
ip ip 0x2d29d110 | |
02 .1.3.6.1.2.1.4.22.1.1 - .1.3.6.1.2.1.4.22.1.2 | |
mibII/ipmedia mibII/ipmedia 0x2d29d800 | |
ip ip 0x2d29dcf0 | |
02 .1.3.6.1.2.1.4.22.1.2 - .1.3.6.1.2.1.4.22.1.3 | |
mibII/ipmedia mibII/ipmedia 0x2d29ebd0 | |
ip ip 0x2d29e4e0 | |
02 .1.3.6.1.2.1.4.22.1.3 - .1.3.6.1.2.1.4.22.1.4 | |
mibII/ipmedia mibII/ipmedia 0x2d29f7b0 | |
ip ip 0x2d29f0c0 | |
02 .1.3.6.1.2.1.4.22.1.4 - .1.3.6.1.2.1.4.22.1.5 | |
mibII/ipmedia mibII/ipmedia 0x2d2a0390 | |
ip ip 0x2d29fca0 | |
02 .1.3.6.1.2.1.4.22.1.5 - .1.3.6.1.2.1.5 | |
ip ip 0x2d2a0880 | |
02 .1.3.6.1.2.1.5 - .1.3.6.1.2.1.5.29 | |
icmp icmp 0x2d2a24f0 | |
02 .1.3.6.1.2.1.5.29 - .1.3.6.1.2.1.5.30 | |
icmpStatsTable icmpStatsTable 0x2d2a2fc0 | |
icmp icmp 0x2d2a3940 | |
02 .1.3.6.1.2.1.5.30 - .1.3.6.1.2.1.5.31 | |
icmpMsgStatsTable icmpMsgStatsTable 0x2d2a52a0 | |
icmp icmp 0x2d2a4100 | |
02 .1.3.6.1.2.1.5.31 - .1.3.6.1.2.1.6 | |
icmp icmp 0x2d2a60c0 | |
02 .1.3.6.1.2.1.6 - .1.3.6.1.2.1.6.13 | |
tcp tcp 0x2d2a0fe0 | |
02 .1.3.6.1.2.1.6.13 - .1.3.6.1.2.1.6.14 | |
tcpTable tcpTable 0x2d2b8200 | |
tcp tcp 0x2d2b98c0 | |
02 .1.3.6.1.2.1.6.14 - .1.3.6.1.2.1.7 | |
tcp tcp 0x2d2ba080 | |
02 .1.3.6.1.2.1.7 - .1.3.6.1.2.1.7.5 | |
udp udp 0x2d2a1b80 | |
02 .1.3.6.1.2.1.7.5 - .1.3.6.1.2.1.7.6 | |
udpTable udpTable 0x2d2bb220 | |
udp udp 0x2d2bc030 | |
02 .1.3.6.1.2.1.7.6 - .1.3.6.1.2.1.8 | |
udp udp 0x2d2bc7f0 | |
02 .1.3.6.1.2.1.8 - .1.3.6.1.2.1.11 | |
02 .1.3.6.1.2.1.11 - .1.3.6.1.2.1.11.30.0 | |
mib_info_id: get mib info id failed! (id=217) | |
[setup_dhcpdv6_conf_with_single_br:795] | |
mibII/snmp mibII/snmp 0x2d27e440 | |
03 .1.3.6.1.2.1.11.30.0 - .1.3.6.1.2.1.11.30.1 | |
mibII/snmpEnableAuthenTraps mibII/snmpEnableAuthenTraps 0x2d280e00 | |
mibII/snmp mibII/snmp 0x2d2815b0 | |
02 .1.3.6.1.2.1.11.30.1 - .1.3.6.1.2.1.12 | |
mibII/snmp mibII/snmp 0x2d281f90 | |
02 .1.3.6.1.2.1.12 - .1.3.6.1.2.1.25.1.1 | |
02 .1.3.6.1.2.1.25.1.1 - .1.3.6.1.2.1.25.1.2 | |
host/hr_system host/hr_system 0x2d2c6d00 | |
02 .1.3.6.1.2.1.25.1.2 - .1.3.6.1.2.1.25.1.3 | |
host/hr_system host/hr_system 0x2d2c75a0 | |
02 .1.3.6.1.2.1.25.1.3 - .1.3.6.1.2.1.25.1.4 | |
host/hr_system host/hr_system 0x2d2c7be0 | |
02 .1.3.6.1.2.1.25.1.4 - .1.3.6.1.2.1.25.1.5 | |
host/hr_system host/hr_system 0x2d2c8220 | |
02 .1.3.6.1.2.1.25.1.5 - .1.3.6.1.2.1.25.1.6 | |
host/hr_system host/hr_system 0x2d2c8860 | |
02 .1.3.6.1.2.1.25.1.6 - .1.3.6.1.2.1.25.1.7 | |
host/hr_system host/hr_system 0x2d2c8ea0 | |
02 .1.3.6.1.2.1.25.1.7 - .1.3.6.1.2.1.25.1.8 | |
host/hr_system host/hr_system 0x2d2c94e0 | |
02 .1.3.6.1.2.1.25.1.8 - .1.3.6.1.2.1.25.2.2 | |
02 .1.3.6.1.2.1.25.2.2 - .1.3.6.1.2.1.25.2.3 | |
host/hrMemorySize host/hrMemorySize 0x2d2bcff0 | |
02 .1.3.6.1.2.1.25.2.3 - .1.3.6.1.2.1.25.2.3.1.1 | |
02 .1.3.6.1.2.1.25.2.3.1.1 - .1.3.6.1.2.1.25.2.3.1.2 | |
host/hr_storage host/hr_storage 0x2d2bd9b0 | |
02 .1.3.6.1.2.1.25.2.3.1.2 - .1.3.6.1.2.1.25.2.3.1.3 | |
host/hr_storage host/hr_storage 0x2d2be300 | |
02 .1.3.6.1.2.1.25.2.3.1.3 - .1.3.6.1.2.1.25.2.3.1.4 | |
host/hr_storage host/hr_storage 0x2d2be9a0 | |
02 .1.3.6.1.2.1.25.2.3.1.4 - .1.3.6.1.2.1.25.2.3.1.5 | |
host/hr_storage host/hr_storage 0x2d2bf040 | |
02 .1.3.6.1.2.1.25.2.3.1.5 - .1.3.6.1.2.1.25.2.3.1.6 | |
host/hr_storage host/hr_storage 0x2d2bf6e0 | |
02 .1.3.6.1.2.1.25.2.3.1.6 - .1.3.6.1.2.1.25.2.3.1.7 | |
host/hr_storage host/hr_storage 0x2d2bfd80 | |
02 .1.3.6.1.2.1.25.2.3.1.7 - .1.3.6.1.2.1.25.2.3.1.8 | |
host/hr_storage host/hr_storage 0x2d2c0420 | |
02 .1.3.6.1.2.1.25.2.3.1.8 - .1.3.6.1.2.1.25.3.2.1.1 | |
02 .1.3.6.1.2.1.25.3.2.1.1 - .1.3.6.1.2.1.25.3.2.1.2 | |
host/hr_device host/hr_device 0x2d2c9b20 | |
02 .1.3.6.1.2.1.25.3.2.1.2 - .1.3.6.1.2.1.25.3.2.1.3 | |
host/hr_device host/hr_device 0x2d2ca4d0 | |
02 .1.3.6.1.2.1.25.3.2.1.3 - .1.3.6.1.2.1.25.3.2.1.4 | |
host/hr_device host/hr_device 0x2d2cab70 | |
02 .1.3.6.1.2.1.25.3.2.1.4 - .1.3.6.1.2.1.25.3.2.1.5 | |
host/hr_device host/hr_device 0x2d2cb210 | |
02 .1.3.6.1.2.1.25.3.2.1.5 - .1.3.6.1.2.1.25.3.2.1.6 | |
host/hr_device host/hr_device 0x2d2cb8b0 | |
02 .1.3.6.1.2.1.25.3.2.1.6 - .1.3.6.1.2.1.25.3.2.1.7 | |
host/hr_device host/hr_device 0x2d2cbf50 | |
02 .1.3.6.1.2.1.25.3.2.1.7 - .1.3.6.1.2.1.25.3.3.1.1 | |
02 .1.3.6.1.2.1.25.3.3.1.1 - .1.3.6.1.2.1.25.3.3.1.2 | |
host/hr_proc host/hr_proc 0x2d2cc5f0 | |
02 .1.3.6.1.2.1.25.3.3.1.2 - .1.3.6.1.2.1.25.3.3.1.3 | |
host/hr_proc host/hr_proc 0x2d2ccf40 | |
02 .1.3.6.1.2.1.25.3.3.1.3 - .1.3.6.1.2.1.25.3.4.1.1 | |
02 .1.3.6.1.2.1.25.3.4.1.1 - .1.3.6.1.2.1.25.3.4.1.2 | |
host/hr_network host/hr_network 0x2d2cd5e0 | |
02 .1.3.6.1.2.1.25.3.4.1.2 - .1.3.6.1.2.1.25.3.5.1.1 | |
02 .1.3.6.1.2.1.25.3.5.1.1 - .1.3.6.1.2.1.25.3.5.1.2 | |
host/hr_print host/hr_print 0x2d2cdf30 | |
02 .1.3.6.1.2.1.25.3.5.1.2 - .1.3.6.1.2.1.25.3.5.1.3 | |
host/hr_print host/hr_print 0x2d2ce880 | |
02 .1.3.6.1.2.1.25.3.5.1.3 - .1.3.6.1.2.1.25.3.6.1.1 | |
02 .1.3.6.1.2.1.25.3.6.1.1 - .1.3.6.1.2.1.25.3.6.1.2 | |
host/hr_disk host/hr_disk 0x2d2d0310 | |
02 .1.3.6.1.2.1.25.3.6.1.2 - .1.3.6.1.2.1.25.3.6.1.3 | |
host/hr_disk host/hr_disk 0x2d2d0a10 | |
02 .1.3.6.1.2.1.25.3.6.1.3 - .1.3.6.1.2.1.25.3.6.1.4 | |
host/hr_disk host/hr_disk 0x2d2d1080 | |
02 .1.3.6.1.2.1.25.3.6.1.4 - .1.3.6.1.2.1.25.3.6.1.5 | |
host/hr_disk host/hr_disk 0x2d2d1720 | |
02 .1.3.6.1.2.1.25.3.6.1.5 - .1.3.6.1.2.1.25.3.7.1.1 | |
02 .1.3.6.1.2.1.25.3.7.1.1 - .1.3.6.1.2.1.25.3.7.1.2 | |
CMD: /bin/sh host/hr_partition host/hr_partition 0x2d2d1e40 | |
-c echo 1 > /proc/sys/net/ipv6/conf/br0/dad_transmits | |
02 .1.3.6.1.2.1.25.3.7.1.2 - .1.3.6.1.2.1.25.3.7.1.3 | |
host/hr_partition host/hr_partition 0x2d2d2790 | |
02 .1.3.6.1.2.1.25.3.7.1.3 - .1.3.6.1.2.1.25.3.7.1.4 | |
host/hr_partition host/hr_partition 0x2d2d2e30 | |
02 .1.3.6.1.2.1.25.3.7.1.4 - .1.3.6.1.2.1.25.3.7.1.5 | |
host/hr_partition host/hr_partition 0x2d2d34d0 | |
02 .1.3.6.1.2.1.25.3.7.1.5 - .1.3.6.1.2.1.25.3.7.1.6 | |
host/hr_partition host/hr_partition 0x2d2d3b70 | |
02 .1.3.6.1.2.1.25.3.7.1.6 - .1.3.6.1.2.1.25.3.8.1.1 | |
02 .1.3.6.1.2.1.25.3.8.1.1 - .1.3.6.1.2.1.25.3.8.1.2 | |
host/hr_filesys host/hr_filesys 0x2d2c0d30 | |
02 .1.3.6.1.2.1.25.3.8.1.2 - .1.3.6.1.2.1.25.3.8.1.3 | |
host/hr_filesys host/hr_filesys 0x2d2c1680 | |
02 .1.3.6.1.2.1.25.3.8.1.3 - .1.3.6.1.2.1.25.3.8.1.4 | |
host/hr_filesys host/hr_filesys 0x2d2c1d20 | |
02 .1.3.6.1.2.1.25.3.8.1.4 - .1.3.6.1.2.1.25.3.8.1.5 | |
host/hr_filesys host/hr_filesys 0x2d2c23c0 | |
02 .1.3.6.1.2.1.25.3.8.1.5 - .1.3.6.1.2.1.25.3.8.1.6 | |
host/hr_filesys host/hr_filesys 0x2d2c2a60 | |
02 .1.3.6.1.2.1.25.3.8.1.6 - .1.3.6.1.2.1.25.3.8.1.7 | |
host/hr_filesys host/hr_filesys 0x2d2c3100 | |
02 .1.3.6.1.2.1.25.3.8.1.7 - .1.3.6.1.2.1.25.3.8.1.8 | |
host/hr_filesys host/hr_filesys 0x2d2c37a0 | |
02 .1.3.6.1.2.1.25.3.8.1.8 - .1.3.6.1.2.1.25.3.8.1.9 | |
host/hr_filesys host/hr_filesys 0x2d2c3e40 | |
02 .1.3.6.1.2.1.25.3.8.1.9 - .1.3.6.1.2.1.25.3.8.1.10 | |
host/hr_filesys host/hr_filesys 0x2d2c44e0 | |
02 .1.3.6.1.2.1.25.3.8.1.10 - .1.3.6.1.2.1.25.4.2 | |
02 .1.3.6.1.2.1.25.4.2 - .1.3.6.1.2.1.25.4.3 | |
hrSWRunTable hrSWRunTable 0x2d2c5c90 | |
02 .1.3.6.1.2.1.25.4.3 - .1.3.6.1.2.1.25.5.1 | |
02 .1.3.6.1.2.1.25.5.1 - .1.3.6.1.2.1.25.5.2 | |
hrSWRunPerfTable hrSWRunPerfTable 0x2d2d4280 | |
02 .1.3.6.1.2.1.25.5.2 - .1.3.6.1.2.1.25.6.3 | |
02 .1.3.6.1.2.1.25.6.3 - .1.3.6.1.2.1.25.6.4 | |
hrSWInstalledTable hrSWInstalledTable 0x2d2c4bf0 | |
02 .1.3.6.1.2.1.25.6.4 - .1.3.6.1.2.1.31.1.5 | |
02 .1.3.6.1.2.1.31.1.5 - .1.3.6.1.2.1.31.1.6 | |
ifTableLastChanged ifTableLastChanged 0x2d2da780 | |
02 .1.3.6.1.2.1.31.1.6 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1.4194312192.64 | |
pon pon 0x2d2a6960 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2.4194312192.64 | |
pon pon 0x2d2a74d0 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3.4194312192.64 | |
pon pon 0x2d2a7f70 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4.4194312192.64 | |
pon pon 0x2d2a8a10 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5.4194312192.64 | |
pon pon 0x2d2a9510 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6.4194312192.64 | |
pon pon 0x2d2aa010 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6.4194312192.64 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7.4194312192.63 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7.4194312192.63 - .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7.4194312192.64 | |
pon pon 0x2d2aab10 | |
02 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7.4194312192.64 - .1.3.6.1.6.3.10.2.1.1 | |
hub 1-0:1.0: USB hub found | |
[resetUsbDevice]rhub 1-0:1.0: 2 ports detected | |
eset /sys/bus/usbusb usb1: authorized to connect | |
/devices/usb1/authorized | |
Internet Systems Consortium DHCP Server 4.4.1 | |
02 .1.3.6.1.6.3.10.2.1.1 - .1.3.6.1.6.3.10.2.1.2 | |
snmpv3/snmpEngine snmpv3/snmpEngine 0x2d2ace20 | |
02 .1.3.6.1.6.3.10.2.1.2 - .1.3.6.1.6.3.10.2.1.3 | |
snmpv3/snmpEngine snmpv3/snmpEngine 0x2d2ad770 | |
02 .1.3.6.1.6.3.10.2.1.3 - .1.3.6.1.6.3.10.2.1.4 | |
snmpv3/snmpEngine snmpv3/snmpEngine 0x2d2ade10 | |
02 .1.3.6.1.6.3.10.2.1.4 - .1.3.6.1.6.3.10.2.1.5 | |
snmpv3/snmpEngine snmpv3/snmpEngine 0x2d2ae4b0 | |
Copyright 2004-2018 Internet Systems Consortium. | |
02 .1.3.6.1.6.3.10.2.1.5 - .1.3.6.1.6.3.11.2.1 | |
All rights reserved.02 .1.3.6.1.6.3.11.2.1 - .1.3.6.1.6.3.11.2.2 | |
snmpMPDStats snmpMPDStats 0x2d2ab680 | |
For info, please visit https://www.isc.org/software/dhcp/ | |
02 .1.3.6.1.6.3.11.2.2 - .1.3.6.1.6.3.15.1.1 | |
02 .1.3.6.1.6.3.15.1.1 - .1.3.6.1.6.3.15.1.2 | |
usmStats usmStats 0x2d2ac200 | |
02 .1.3.6.1.6.3.15.1.2 - .1.3.6.1.6.3.15.1.2.1 | |
02 .1.3.6.1.6.3.15.1.2.1 - .1.3.6.1.6.3.15.1.2.2 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2aeb50 | |
02 .1.3.6.1.6.3.15.1.2.2 - .1.3.6.1.6.3.15.1.2.2.1.3 | |
02 .1.3.6.1.6.3.15.1.2.2.1.3 - .1.3.6.1.6.3.15.1.2.2.1.4 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2af500 | |
02 .1.3.6.1.6.3.15.1.2.2.1.4 - .1.3.6.1.6.3.15.1.2.2.1.5 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2afee0 | |
02 .1.3.6.1.6.3.15.1.2.2.1.5 - .1.3.6.1.6.3.15.1.2.2.1.6 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b05f0 | |
02 .1.3.6.1.6.3.15.1.2.2.1.6 - .1.3.6.1.6.3.15.1.2.2.1.7 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b0d00 | |
02 .1.3.6.1.6.3.15.1.2.2.1.7 - .1.3.6.1.6.3.15.1.2.2.1.8 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b1410 | |
02 .1.3.6.1.6.3.15.1.2.2.1.8 - .1.3.6.1.6.3.15.1.2.2.1.9 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b1b20 | |
02 .1.3.6.1.6.3.15.1.2.2.1.9 - .1.3.6.1.6.3.15.1.2.2.1.10 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b2230 | |
02 .1.3.6.1.6.3.15.1.2.2.1.10 - .1.3.6.1.6.3.15.1.2.2.1.11 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b2940 | |
02 .1.3.6.1.6.3.15.1.2.2.1.11 - .1.3.6.1.6.3.15.1.2.2.1.12 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b3050 | |
02 .1.3.6.1.6.3.15.1.2.2.1.12 - .1.3.6.1.6.3.15.1.2.2.1.13 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b3760 | |
02 .1.3.6.1.6.3.15.1.2.2.1.13 - .1.3.6.1.6.3.15.1.2.2.1.14 | |
snmpv3/usmUser snmpv3/usmUser 0x2d2b3e70 | |
02 .1.3.6.1.6.3.15.1.2.2.1.14 - .1.3.6.1.6.3.16.1.1 | |
02 .1.3.6.1.6.3.16.1.1 - .1.3.6.1.6.3.16.1.2 | |
vacm_context vacm_context 0x2d2b45f0 | |
02 .1.3.6.1.6.3.16.1.2 - .1.3.6.1.6.3.16.1.2.1.3 | |
02 .1.3.6.1.6.3.16.1.2.1.3 - .1.3.6.1.6.3.16.1.2.1.4 | |
mibII/vacm:sec2group mibII/vacm:sec2group 0x2d287da0 | |
02 .1.3.6.1.6.3.16.1.2.1.4 - .1.3.6.1.6.3.16.1.2.1.5 | |
mibII/vacm:sec2group mibII/vacm:sec2group 0x2d288660 | |
02 .1.3.6.1.6.3.16.1.2.1.5 - .1.3.6.1.6.3.16.1.2.1.6 | |
mibII/vacm:sec2group mibII/vacm:sec2group 0x2d288d00 | |
02 .1.3.6.1.6.3.16.1.2.1.6 - .1.3.6.1.6.3.16.1.4.1.4 | |
02 .1.3.6.1.6.3.16.1.4.1.4 - .1.3.6.1.6.3.16.1.4.1.5 | |
mibII/vacm:access mibII/vacm:access 0x2d2893a0 | |
02 .1.3.6.1.6.3.16.1.4.1.5 - .1.3.6.1.6.3.16.1.4.1.6 | |
mibII/vacm:access mibII/vacm:access 0x2d289cf0 | |
02 .1.3.6.1.6.3.16.1.4.1.6 - .1.3.6.1.6.3.16.1.4.1.7 | |
mibII/vacm:access mibII/vacm:access 0x2d28a390 | |
02 .1.3.6.1.6.3.16.1.4.1.7 - .1.3.6.1.6.3.16.1.4.1.8 | |
mibII/vacm:access mibII/vacm:access 0x2d28aa30 | |
02 .1.3.6.1.6.3.16.1.4.1.8 - .1.3.6.1.6.3.16.1.4.1.9 | |
mibII/vacm:access mibII/vacm:access 0x2d28b0d0 | |
02 .1.3.6.1.6.3.16.1.4.1.9 - .1.3.6.1.6.3.16.1.4.1.10 | |
mibII/vacm:access mibII/vacm:access 0x2d28b770 | |
02 .1.3.6.1.6.3.16.1.4.1.10 - .1.3.6.1.6.3.16.1.5.1 | |
02 .1.3.6.1.6.3.16.1.5.1 - .1.3.6.1.6.3.16.1.5.2 | |
mibII/vacm:view mibII/vacm:view 0x2d28be10 | |
02 .1.3.6.1.6.3.16.1.5.2 - .1.3.6.1.6.3.16.1.5.2.1.3 | |
02 .1.3.6.1.6.3.16.1.5.2.1.3 - .1.3.6.1.6.3.16.1.5.2.1.4 | |
Confhub 2-0:1.0: USB hub found | |
ig file: /var/dhchub 2-0:1.0: 1 port detected | |
pd6.conf[resetUsbusb usb2: authorized to connect | |
Device]reset /sys/bus/usb/devices/usb2/authorized | |
mibII/vacm:view mibII/vacm:view 0x2d28c760 | |
02 .1.3.6.1.6.3.16.1.5.2.1.4 - .1.3.6.1.6.3.16.1.5.2.1.5 | |
mibII/vacm:view mibII/vacm:view 0x2d28d170 | |
Database file: /var/dhcpd6.leases | |
02 .1.3.6.1.6.3.16.1.5.2.1.5 - .1.3.6.1.6.3.16.1.5.2.1.6 | |
mibII/vacm:view mibII/vacm:view 0x2d28d880 | |
PID file: /var/run/dhcpd6.pid | |
02 .1.3.6.1.6.3.16.1.5.2.1.6 - .1.3.6.1.6.3.16.1.5.2.1.7 | |
mibII/vacm:view mibII/vacm:view 0x2d28df90 | |
02 .1.3.6.1.6.3.16.1.5.2.1.7 - .2 | |
02 .2 - .3 | |
Wrote 0 NA, 0 TA, 0 PD leases to lease file. | |
No subnet6 declaration for br0 (fe80::4286:cbff:fe76:4b4d). | |
** Ignoring requests on br0. If this is not what | |
you want, please write a subnet6 declaration | |
in your dhcpd.conf file for the network segment | |
to which interface br0 is attached. ** | |
Not configured to listen on any interfaces! | |
If you think you have received this message due to a bug rather | |
than a configuration issue please read the section on submitting | |
bugs on either our web page at www.isc.org or in the README file | |
before submitting a bug. These pages explain the proper | |
process and the information we find helpful for debugging. | |
exiting. | |
[stop_upnp:21759] Stop miniupnpd! (wanIf=ppp0) | |
upnpctrl(down): MINIUPNPD did not start! | |
[update_monitor_list_file:25271] process_name = systemd, action = 1 | |
[update_monitor_list_file:25271] process_name = lanNetInfo, action = 1 | |
[update_monitor_list_file:25271] process_name = omci_app, action = 1 | |
CMD: /bin/monitord | |
System startup success ! | |
===== monitord ===== | |
Debug message: off | |
Monitor Timer: 15 sec. | |
cfg_mib_update_fn:4303 delay mib commit | |
[41;33m ===> Do flow flush <=== [0m | |
0 | |
0 | |
Password: | |
login: tm tmadmin | |
Password: | |
login: tmadmin | |
Password: PHL: [MAC] band_idle_ck: cnt 2199, band 0, 0x8 | |
>sh | |
# flash get LAN_SDE_[J[J[JDS_MODE | |
# | |
# flash get LAN_SDS_MODE[J[J[J[J[J[J[J[J[JSPEED_MODE | |
# cat/[J pro[J[J[J/pro | |
# cat /proc/[J la [J[J | |
1/ 31/ device-tree/ | |
10/ 317/ devices | |
1057/ 318/ diskstats | |
11/ 354/ driver/ | |
1111/ 3544/ dxsfirmware | |
1117/ 3546/ dynamic_debug/ | |
1154/ 355/ eth_nic/ | |
12/ 3557/ ethernet_dsp_info | |
1223/ 3559/ execdomains | |
1230/ 3575/ fastPassNF/ | |
1231/ 3619/ fc/ | |
1270/ 3620/ filesystems | |
13/ 3621/ fs/ | |
1325/ 3627/ gpio | |
1327/ 3660/ igmp/ | |
1329/ 3663/ internet_flag | |
1358/ 3668/ interrupts | |
1376/ 3669/ iomem | |
14/ 3670/ ioports | |
1444/ 37/ irq/ | |
1447/ 376/ kallsyms | |
1452/ 38/ key-users | |
1454/ 383/ keys | |
1455/ 3842/ kmsg | |
1484/ 3843/ led_swblink/ | |
1489/ 3844/ load_ah_default | |
15/ 3848/ load_default | |
16/ 3916/ load_reboot | |
1610/ 3919/ loadavg | |
1648/ 3924/ locks | |
1678/ 3925/ loopback_detect | |
1679/ 3926/ loopback_detect_ethtype | |
1680/ 4/ meminfo | |
1689/ 4348/ misc | |
17/ 4357/ modules | |
1749/ 4510/ mounts | |
1751/ 4516/ mptest | |
18/ 4633/ mtd | |
1810/ 4634/ net/ | |
1816/ 4636/ ni/ | |
1826/ 468/ omci/ | |
19/ 482/ pagetypeinfo | |
1930/ 49/ partitions | |
1932/ 5/ power_flag | |
1936/ 51/ realtek/ | |
2/ 520/ rt_api/ | |
20/ 6/ rtk_smuxdev/ | |
2003/ 60/ rtk_tr142/ | |
2013/ 6793/ rtl8221b/ | |
21/ 7/ self/ | |
2101/ 8/ slicinit | |
213/ 9/ softirqs | |
2168/ HostSpeedUP speedtest_dbg | |
2170/ HostSpeedUP-FLOWID stat | |
2174/ HostSpeedUP-Info sys/ | |
2187/ HostSpeedUP-STREAM sysrq-trigger | |
22/ HostSpeedUP-SkipFcBit sysvipc/ | |
23/ aipc_dev/ thread-self/ | |
24/ buddyinfo timer_list | |
2423/ bus/ tty/ | |
25/ ca_rtk/ uptime | |
26/ cgroups version | |
27/ cmdline vmallocinfo | |
28/ config.gz vmstat | |
29/ consoles voip/ | |
3/ cpuinfo zoneinfo | |
30/ crypto | |
# cat /proc/[Jrtl8221 | |
# cat /proc/rtl8221b/[J | |
help link_status phy | |
# cat /proc/rtl8221b/[Jli | |
# cat /proc/rtl8221b/link_status [J | |
-------------------------------- | |
Port 4 [Addr 7] | |
Link : DOWN | |
Speed : nolink (0) | |
Duplex : HALF | |
Serdes : DOWN / unknown (5) | |
-------------------------------- | |
# ct[J[Jcat /proc/o | |
# cat /proc/omci/[J | |
cf_map dmMode macFilter uniQos vgf | |
debugInfo f2dq mb usage wanInfo | |
devMode l2 omciMirror veip | |
# cat /proc/omci/[J................................. | |
PK : [redacted] | |
DN : [redacted] | |
DS : [redacted] | |
PID : Your company name | |
MID : Your module name | |
URL : https://iot-auth-global.aliyuncs.com/auth/bootstrap | |
SM : TLS + Guider | |
TS : [redacted] | |
................................. | |
[prt] Loading the CA root certificate ... | |
[prt] ok (0 skipped) | |
[prt] Connecting to /iot-auth-global.aliyuncs.com/443... | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[1], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[2], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[3], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[4], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[5], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[6], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[7], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] dns server: 223.5.5.5 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 223.6.6.6 | |
send dns request message failed: : Network is unreachable | |
[prt] dns server: 8.8.8.8 | |
send dns request message failed: : Network is unreachable | |
[prt] getaddrinfo error[8], res: Bad value for ai_flags, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] backup failed ! net_connect returned -0x0052 | |
[prt] getaddrinfo error[1], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[2], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[3], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[4], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[5], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[6], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[7], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] getaddrinfo error[8], res: No address associated with hostname, host: iot-auth-global.aliyuncs.com, port: 443 | |
[prt] failed ! net_connect returned -0x0052 | |
[prt] ssl_disconnect | |
[1;31m[err](182641) httpclient_conn(76): httpclient_conn fail | |
[0m[1;31m[err](182641) httpclient_common(887): httpclient_connect is error, ret = -8 | |
[0m[1;31m[err](182641) guider_get_conn_info(1196): Request MQTT URL failed:-1 | |
[0m[1;31m[err](182641) iotx_guider_authenticate(1422): guider auth fail | |
[0m[1;31m[err](183683) _mqtt_connect(288): mqtt connect failed | |
[0m[1;31m[err](183684) _iotx_linkkit_master_connect(1480): DM Start Failed | |
[0m[1;32;40m_linkkit_init.305: IOT_Linkkit_Connect failed, retry after 30s... | |
[0m | |
cat: read error: Is a directory | |
# | |
# cat /proc/omci/[J | |
cf_map dmMode macFilter uniQos vgf | |
debugInfo f2dq mb usage wanInfo | |
devMode l2 omciMirror veip | |
# cat /proc/omci/[J[J[J[J[J[J | |
1/ 31/ device-tree/ | |
10/ 317/ devices | |
1057/ 318/ diskstats | |
11/ 354/ driver/ | |
1111/ 3544/ dxsfirmware | |
1117/ 3546/ dynamic_debug/ | |
1154/ 355/ eth_nic/ | |
12/ 3557/ ethernet_dsp_info | |
1223/ 3559/ execdomains | |
1230/ 3575/ fastPassNF/ | |
1231/ 3619/ fc/ | |
1270/ 3620/ filesystems | |
13/ 3621/ fs/ | |
1325/ 3627/ gpio | |
1327/ 3660/ igmp/ | |
1329/ 3663/ internet_flag | |
1358/ 3668/ interrupts | |
1376/ 3669/ iomem | |
14/ 3670/ ioports | |
1444/ 37/ irq/ | |
1447/ 376/ kallsyms | |
1452/ 38/ key-users | |
1454/ 383/ keys | |
1455/ 3842/ kmsg | |
1484/ 3843/ led_swblink/ | |
1489/ 3844/ load_ah_default | |
15/ 3848/ load_default | |
16/ 3916/ load_reboot | |
1610/ 3919/ loadavg | |
1648/ 3924/ locks | |
1678/ 3925/ loopback_detect | |
1679/ 3926/ loopback_detect_ethtype | |
1680/ 4/ meminfo | |
1689/ 4348/ misc | |
17/ 4357/ modules | |
1749/ 4510/ mounts | |
1751/ 4516/ mptest | |
18/ 4633/ mtd | |
1810/ 4634/ net/ | |
1816/ 4636/ ni/ | |
1826/ 468/ omci/ | |
19/ 482/ pagetypeinfo | |
1930/ 49/ partitions | |
1932/ 5/ power_flag | |
1936/ 51/ realtek/ | |
2/ 520/ rt_api/ | |
20/ 6/ rtk_smuxdev/ | |
2003/ 60/ rtk_tr142/ | |
2013/ 6793/ rtl8221b/ | |
21/ 7/ self/ | |
2101/ 8/ slicinit | |
213/ 9/ softirqs | |
2168/ HostSpeedUP speedtest_dbg | |
2170/ HostSpeedUP-FLOWID stat | |
2174/ HostSpeedUP-Info sys/ | |
2187/ HostSpeedUP-STREAM sysrq-trigger | |
22/ HostSpeedUP-SkipFcBit sysvipc/ | |
23/ aipc_dev/ thread-self/ | |
24/ buddyinfo timer_list | |
2423/ bus/ tty/ | |
25/ ca_rtk/ uptime | |
26/ cgroups version | |
27/ cmdline vmallocinfo | |
28/ config.gz vmstat | |
29/ consoles voip/ | |
3/ cpuinfo zoneinfo | |
30/ crypto | |
# cat /proc/[Jnet | |
# cat /proc/net/[J | |
anycast6 ip_tables_matches raw6 | |
arp ip_tables_names route | |
dev ip_tables_targets rt6_stats | |
dev_mcast ipconfig/ rt_cache | |
dev_snmp6/ ipt_hashlimit/ rtk_wifi6/ | |
fib_trie ipv6_route snmp | |
fib_triestat mcfilter snmp6 | |
icmp mcfilter6 sockstat | |
icmp6 netfilter/ sockstat6 | |
if_inet6 netlink softnet_stat | |
igmp netstat stat/ | |
igmp6 nf_conntrack tcp | |
ip6_flowlabel nf_conntrack_expect tcp6 | |
ip6_mr_cache packet udp | |
ip6_mr_vif pnp udp6 | |
ip6_tables_matches pppoe udplite | |
ip6_tables_names pppol2tp udplite6 | |
ip6_tables_targets protocols unix | |
ip6t_hashlimit/ psched vlan/ | |
ip_mr_cache ptype wireless | |
ip_mr_vif raw xt_recent/ | |
# cat /proc/net/[Jdev | |
# cat /proc/net/dev[J | |
dev dev_mcast dev_snmp6/ | |
# cat /proc/net/dev[J | |
Inter-| Receive | Transmit | |
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed | |
lo: 31800 400 0 0 0 0 0 0 31800 400 0 0 0 0 0 0 | |
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ip6tnl0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.6: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.7: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.8: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
wlan0: 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 | |
wlan1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.2.0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.3.0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.4.0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
eth0.5.0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
br0: 0 0 0 0 0 0 0 0 2210 19 0 0 0 0 0 0 | |
ppp0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp6: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
ppp7: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0_0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0_1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0_2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0_2_br: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
nas0_3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
wlan0-vap0: 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 | |
wlan1-vap0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment