A350 · June 19, 2017 14:24
diff --git a/minidlna.conf b/minidlna.conf
 # This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media
 # server.
 #
 # Unless otherwise noted, the commented out options show their default value.
 #
 # On Debian, you can also refer to the minidlna.conf(5) man page for
 # documentation about this file.

 # Specify the user name or uid to run as.
 user=exe


 # Path to the directory you want scanned for media files.
 #
 # This option can be specified more than once if you want multiple directories
 # scanned.
 #
 # If you want to restrict a media_dir to a specific content type, you can
 # prepend the directory name with a letter representing the type (A, P or V),
 # followed by a comma, as so:
 #   * "A" for audio    (eg. media_dir=A,/var/lib/minidlna/music)
 #   * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures)
 #   * "V" for video    (eg. media_dir=V,/var/lib/minidlna/videos)
 media_dir=/media/exe/datos
 media_dir=/media/exe/1TB/¹Video

 # Path to the directory that should hold the database and album art cache.
 #db_dir=/var/cache/minidlna

 # Path to the directory that should hold the log file.
 #log_dir=/var/log

 # Type and minimum level of importance of messages to be logged.
 #
 # The types are "artwork", "database", "general", "http", "inotify",
 # "metadata", "scanner", "ssdp" and "tivo".
 #
 # The levels are "off", "fatal", "error", "warn", "info" or "debug".
 # "off" turns of logging entirely, "fatal" is the highest level of importance
 # and "debug" the lowest.
 #
 # The types are comma-separated, followed by an equal sign ("="), followed by a
 # level that applies to the preceding types. This can be repeated, separating
 # each of these constructs with a comma.
 #
 # The default is to log all types of messages at the "warn" level.
 #log_level=general,artwork,database,inotify,scanner,metadata,http,ssdp,tivo=warn

 # Use a different container as the root of the directory tree presented to
 # clients. The possible values are:
 #   * "." - standard container
 #   * "B" - "Browse Directory"
 #   * "M" - "Music"
 #   * "P" - "Pictures"
 #   * "V" - "Video"
 # If you specify "B" and the client device is audio-only then "Music/Folders"
 # will be used as root.
 #root_container=.

 # Network interface(s) to bind to (e.g. eth0), comma delimited.
 # This option can be specified more than once.
 #network_interface=

 # IPv4 address to listen on (e.g. 192.0.2.1/24).
 # If omitted, the mask defaults to 24. The IPs are added to those determined
 # from the network_interface option above.
 # This option can be specified more than once.
 #listening_ip=

 # Port number for HTTP traffic (descriptions, SOAP, media transfer).
 # This option is mandatory (or it must be specified on the command-line using
 # "-p").
 port=8200

 # URL presented to clients (e.g. http://example.com:80).
 #presentation_url=/

 # Name that the DLNA server presents to clients.
 # Defaults to "hostname: username".
 friendly_name=bunsen

 # Serial number the server reports to clients.
 # Defaults to 00000000.
 serial=681019810597110

 # Model name the server reports to clients.
 #model_name=Windows Media Connect compatible (MiniDLNA)

 # Model number the server reports to clients.
 # Defaults to the version number of minidlna.
 model_number=1

 # Automatic discovery of new files in the media_dir directory.
 inotify=yes

 # List of file names to look for when searching for album art.
 # Names should be delimited with a forward slash ("/").
 # This option can be specified more than once.
 album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg
 album_art_names=AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg
 album_art_names=Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg

 # Strictly adhere to DLNA standards.
 # This allows server-side downscaling of very large JPEG images, which may
 # decrease JPEG serving performance on (at least) Sony DLNA products.
 #strict_dlna=no

 # Support for streaming .jpg and .mp3 files to a TiVo supporting HMO.
 #enable_tivo=no

 # Notify interval, in seconds.
 notify_interval=300

 # Path to the MiniSSDPd socket, for MiniSSDPd support.
 #minissdpdsocket=/run/minissdpd.sock


 #### añadir user también en etc/init.d/minidlna  ####
	# This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media
	# server.
	#
	# Unless otherwise noted, the commented out options show their default value.
	#
	# On Debian, you can also refer to the minidlna.conf(5) man page for
	# documentation about this file.

	# Specify the user name or uid to run as.
	user=exe


	# Path to the directory you want scanned for media files.
	#
	# This option can be specified more than once if you want multiple directories
	# scanned.
	#
	# If you want to restrict a media_dir to a specific content type, you can
	# prepend the directory name with a letter representing the type (A, P or V),
	# followed by a comma, as so:
	# * "A" for audio (eg. media_dir=A,/var/lib/minidlna/music)
	# * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures)
	# * "V" for video (eg. media_dir=V,/var/lib/minidlna/videos)
	media_dir=/media/exe/datos
	media_dir=/media/exe/1TB/¹Video

	# Path to the directory that should hold the database and album art cache.
	#db_dir=/var/cache/minidlna

	# Path to the directory that should hold the log file.
	#log_dir=/var/log

	# Type and minimum level of importance of messages to be logged.
	#
	# The types are "artwork", "database", "general", "http", "inotify",
	# "metadata", "scanner", "ssdp" and "tivo".
	#
	# The levels are "off", "fatal", "error", "warn", "info" or "debug".
	# "off" turns of logging entirely, "fatal" is the highest level of importance
	# and "debug" the lowest.
	#
	# The types are comma-separated, followed by an equal sign ("="), followed by a
	# level that applies to the preceding types. This can be repeated, separating
	# each of these constructs with a comma.
	#
	# The default is to log all types of messages at the "warn" level.
	#log_level=general,artwork,database,inotify,scanner,metadata,http,ssdp,tivo=warn

	# Use a different container as the root of the directory tree presented to
	# clients. The possible values are:
	# * "." - standard container
	# * "B" - "Browse Directory"
	# * "M" - "Music"
	# * "P" - "Pictures"
	# * "V" - "Video"
	# If you specify "B" and the client device is audio-only then "Music/Folders"
	# will be used as root.
	#root_container=.

	# Network interface(s) to bind to (e.g. eth0), comma delimited.
	# This option can be specified more than once.
	#network_interface=

	# IPv4 address to listen on (e.g. 192.0.2.1/24).
	# If omitted, the mask defaults to 24. The IPs are added to those determined
	# from the network_interface option above.
	# This option can be specified more than once.
	#listening_ip=

	# Port number for HTTP traffic (descriptions, SOAP, media transfer).
	# This option is mandatory (or it must be specified on the command-line using
	# "-p").
	port=8200

	# URL presented to clients (e.g. http://example.com:80).
	#presentation_url=/

	# Name that the DLNA server presents to clients.
	# Defaults to "hostname: username".
	friendly_name=bunsen

	# Serial number the server reports to clients.
	# Defaults to 00000000.
	serial=681019810597110

	# Model name the server reports to clients.
	#model_name=Windows Media Connect compatible (MiniDLNA)

	# Model number the server reports to clients.
	# Defaults to the version number of minidlna.
	model_number=1

	# Automatic discovery of new files in the media_dir directory.
	inotify=yes

	# List of file names to look for when searching for album art.
	# Names should be delimited with a forward slash ("/").
	# This option can be specified more than once.
	album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg
	album_art_names=AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg
	album_art_names=Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg

	# Strictly adhere to DLNA standards.
	# This allows server-side downscaling of very large JPEG images, which may
	# decrease JPEG serving performance on (at least) Sony DLNA products.
	#strict_dlna=no

	# Support for streaming .jpg and .mp3 files to a TiVo supporting HMO.
	#enable_tivo=no

	# Notify interval, in seconds.
	notify_interval=300

	# Path to the MiniSSDPd socket, for MiniSSDPd support.
	#minissdpdsocket=/run/minissdpd.sock


	#### añadir user también en etc/init.d/minidlna ####