Created
July 3, 2021 09:28
-
-
Save ptpt52/566dfc2cb8af35628ebcf7d0e403c469 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Port /dev/ttyUSB0, 17:24:46 | |
Press CTRL-A Z for help on special keys | |
U-Boot 2016.01 (Jun 07 2021 - 14:49:46 +0800) | |
DRAM: smem ram ptable found: ver: 1 len: 4 | |
256 MiB | |
Using default environment | |
In: serial@78AF000 | |
Out: serial@78AF000 | |
Err: serial@78AF000 | |
machid: 8040000 | |
No ART partition found | |
SPI_ADDR_LEN=3 | |
SF: Detected XM25QU128C with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
input <abort key> to stop autoboot in 500 ms | |
device 0 offset 0xe0000, size 0xd0 | |
SF: 208 bytes @ 0xe0000 Read: OK | |
verifying uboot partition... | |
copy the full partition to ram ... | |
device 0 offset 0xc0000, size 0x20000 | |
SF: 131072 bytes @ 0xc0000 Read: OK | |
ok | |
verifying kernel and romfs partition... | |
copy the full partition to ram ... | |
device 0 offset 0xe0200, size 0xc9fe00 | |
SF: 13237760 bytes @ 0xe0200 Read: OK | |
ok | |
device 0 offset 0xe0000, size 0x200 | |
SF: 512 bytes @ 0xe0000 Read: OK | |
device 0 offset 0xc0000, size 0x20000 | |
SF: 131072 bytes @ 0xc0000 Read: OK | |
U-Boot 2016.01 (Jun 07 2021 - 15:01:17 +0800) | |
DRAM: smem ram ptable found: ver: 1 len: 4 | |
256 MiB | |
Using default environment | |
In: serial@78AF000 | |
Out: serial@78AF000 | |
Err: serial@78AF000 | |
machid: 8040000 | |
No ART partition found | |
SPI_ADDR_LEN=3 | |
SF: Detected XM25QU128C with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
device 0 offset 0xe0000, size 0x200 | |
SF: 512 bytes @ 0xe0000 Read: OK | |
set_fs_bootargs flash_type = 6 | |
SPI_ADDR_LEN=3 | |
SF: Detected XM25QU128C with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
device 0 offset 0xe0200, size 0x300000 | |
SF: 3145728 bytes @ 0xe0200 Read: OK | |
## Loading kernel from FIT Image at 44000000 ... | |
Using 'config@mp02.1' configuration | |
Trying 'kernel@1' kernel subimage | |
Description: ARM OpenWrt Linux-4.4.60 | |
Type: Kernel Image | |
Compression: lzma compressed | |
Data Start: 0x440000e4 | |
Data Size: 2273273 Bytes = 2.2 MiB | |
Architecture: ARM | |
OS: Linux | |
Load Address: 0x41208000 | |
Entry Point: 0x41208000 | |
Hash algo: crc32 | |
Hash value: 9098d759 | |
Hash algo: sha1 | |
Hash value: 09ed44e559a5ebabd658d1df2d805618b5fd86ed | |
## Loading fdt from FIT Image at 44000000 ... | |
Using 'config@mp02.1' configuration | |
Trying 'fdt@mp02.1' fdt subimage | |
Description: ARM OpenWrt qcom-ipq50xx-mpxx device tree blob | |
Type: Flat Device Tree | |
Compression: uncompressed | |
Data Start: 0x44247c00 | |
Data Size: 57161 Bytes = 55.8 KiB | |
Architecture: ARM | |
Hash algo: crc32 | |
Hash value: 41901127 | |
Hash algo: sha1 | |
Hash value: 11dd4745c631571bbf7e5daeb54e48b66a74f2e9 | |
Booting using the fdt blob at 0x44247c00 | |
Uncompressing Kernel Image ... OK | |
Loading Device Tree to 497f0000, end 49800f48 ... OK | |
Using machid 0x8040000 from environment | |
Starting kernel ... | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 4.4.60 (jenkins@wlcilnx1) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 c33803bcc3c5ddda2cbdc9ce36a7bd92f6f1fdbb) ) #1 SMP PREEMPT Mon Jun 7 15:03:40 CST 2021 | |
[ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1 | |
[ 0.000000] Reserved memory: OVERLAP DETECTED! | |
[ 0.000000] q6_mem_regions@4B000000 (0x4b000000--0x4e400000) overlaps with q6_code_data@4B000000 (0x4b000000--0x4b060000) | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.0 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] PERCPU: Embedded 10 pages/cpu @8fdc3000 s11968 r8192 d20800 u40960 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 47616 | |
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=/dev/mtdblock6 rootfstype=squashfs,jffs2 rootwait swiotlb=1 | |
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Memory: 183412K/192512K available (4101K kernel code, 285K rwdata, 1540K rodata, 196K init, 891K bss, 9100K reserved, 0K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
[ 0.000000] vmalloc : 0x90800000 - 0xff800000 (1776 MB) | |
[ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB) | |
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
[ 0.000000] .text : 0x81208000 - 0x8178a73c (5642 kB) | |
[ 0.000000] .init : 0x8178b000 - 0x817bc000 ( 196 kB) | |
[ 0.000000] .data : 0x817bc000 - 0x818034c4 ( 286 kB) | |
[ 0.000000] .bss : 0x818034c4 - 0x818e2368 ( 892 kB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 32. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
[ 0.000000] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480] | |
[ 0.000000] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512] | |
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000017] Switching to timer-based delay loop, resolution 41ns | |
[ 0.000467] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
[ 0.000483] pid_max: default: 4096 minimum: 301 | |
[ 0.000566] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000577] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.001081] CPU: Testing write buffer coherency: ok | |
[ 0.001481] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.001537] Setting up static identity map for 0x41208200 - 0x41208234 | |
[ 0.052168] MSM Memory Dump base table set up | |
[ 0.052200] MSM Memory Dump apps data table set up | |
[ 0.090408] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.090519] Brought up 2 CPUs | |
[ 0.090536] SMP: Total of 2 processors activated (96.00 BogoMIPS). | |
[ 0.090543] CPU: All CPU(s) started in SVC mode. | |
[ 0.103535] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4 | |
[ 0.103726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.103757] futex hash table entries: 16 (order: -2, 1024 bytes) | |
[ 0.103873] pinctrl core: initialized pinctrl subsystem | |
[ 0.104853] NET: Registered protocol family 16 | |
[ 0.106322] DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
[ 0.107165] NET: Registered protocol family 42 | |
[ 0.111790] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider | |
[ 0.115270] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.116336] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.127067] CPU: IPQ0509, SoC Version: 1.1 | |
[ 0.164837] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.166816] NET: Registered protocol family 2 | |
[ 0.167505] TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.167544] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
[ 0.167586] TCP: Hash tables configured (established 2048 bind 2048) | |
[ 0.167646] UDP hash table entries: 128 (order: 0, 4096 bytes) | |
[ 0.167664] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) | |
[ 0.167872] NET: Registered protocol family 1 | |
[ 0.175413] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.175452] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.176860] io scheduler noop registered | |
[ 0.176880] io scheduler deadline registered (default) | |
[ 0.182708] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set | |
[ 0.183170] bt_driver 1943008.bt: bt_parse_ipc | |
[ 0.183216] bt_driver 1943008.bt: bt_parse_mem | |
[ 0.183271] bt_driver 1943008.bt: bt_parse_dt operating in secure mode | |
[ 0.184227] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 153, base_baud = 0) is a EUD UART | |
[ 0.185750] Registered Sucessfully | |
[ 0.186326] msm_serial 78af000.serial: msm_serial: detected port #0 | |
[ 0.186381] msm_serial 78af000.serial: uartclk = 1843199 | |
[ 0.186445] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 20, base_baud = 115199) is a MSM | |
[ 0.186478] msm_serial: console setup on port #0 | |
[ 0.727753] console [ttyMSM0] enabled | |
[ 0.732798] msm_serial: driver initialized | |
[ 0.736399] msm_serial_hsl_init: driver initialized | |
[ 0.740578] diag: IPC Logging disabled | |
[ 0.745572] TRACK: P[0] PMask[4] | |
[ 0.748535] TRACK: P[1] PMask[4] | |
[ 0.751920] TRACK: P[2] PMask[4] | |
[ 0.755590] TRACK: P[3] PMask[4] | |
[ 0.758409] nik 4097 info->svc_id | |
[ 0.775785] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 | |
[ 0.777239] m25p80 spi32766.0: found xm25qu128c, expected n25q128a11 | |
[ 0.781899] m25p80 spi32766.0: xm25qu128c (16384 Kbytes) | |
[ 0.788269] SLP flash nor read | |
[ 0.793748] Searching for RedBoot partition table | |
[ 0.796434] 9 RedBoot partitions found on MTD device spi32766.0 | |
[ 0.801163] Creating 9 MTD partitions on "spi32766.0": | |
[ 0.806911] 0x000000000000-0x00000009f800 : "factory_boot" | |
[ 0.825370] 0x00000009f800-0x0000000a0000 : "factory_info" | |
[ 0.845348] 0x0000000a0000-0x0000000b0000 : "art" | |
[ 0.865336] 0x0000000b0000-0x0000000c0000 : "config" | |
[ 0.885340] 0x0000000c0000-0x0000000e0000 : "normal_boot" | |
[ 0.886221] 0x0000000e0000-0x0000003360d4 : "kernel" | |
[ 0.905361] 0x0000003360d4-0x000000d80000 : "rootfs" | |
[ 0.925356] mtd: device 6 (rootfs) set to be root filesystem | |
[ 0.925396] 0x000000d80000-0x000001000000 : "rootfs_data" | |
[ 0.945377] 0x0000000e0000-0x000001000000 : "firmware" | |
[ 0.947563] libphy: Fixed MDIO Bus: probed | |
[ 1.164854] qca-mdio 88000.mdio: Could not find phy-reset-gpio | |
[ 1.164995] libphy: qca_mdio: probed | |
[ 1.170008] qca-mdio 88000.mdio: qca-mdio driver was registered | |
[ 1.384862] qca-mdio 90000.mdio: Could not find phy-reset-gpio | |
[ 1.384991] libphy: qca_mdio: probed | |
[ 1.389607] qca-mdio 90000.mdio: qca-mdio driver was registered | |
[ 1.495130] PPP generic driver version 2.4.2 | |
[ 1.495297] NET: Registered protocol family 24 | |
[ 1.498494] PPTP driver version 0.8.5 | |
[ 1.502883] cnss: INFO: IPC Logging is disabled! | |
[ 1.507051] cnss[2]: INFO: Platform driver probed successfully. plat 8f1d8010 tgt 0xfffc | |
[ 1.511452] cnss[41]: INFO: Platform driver probed successfully. plat 8f1e8010 tgt 0xfffb | |
[ 1.520813] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed | |
[ 1.529210] | |
[ 1.529210] Version Rollback Feature Disabled | |
[ 1.536119] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss | |
[ 1.539603] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available | |
[ 1.548272] q6v5_wcss_userpd1(8fde5d58) node found | |
[ 1.555807] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1 | |
[ 1.559640] remoteproc remoteproc1: q6v5_wcss_userpd1 is available | |
[ 1.567213] q6v5_wcss_userpd2(8fde5ffc) node found | |
[ 1.574304] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2 | |
[ 1.578264] remoteproc remoteproc2: q6v5_wcss_userpd2 is available | |
[ 1.586611] Mirror/redirect action on | |
[ 1.592610] u32 classifier | |
[ 1.595711] input device check on | |
[ 1.598276] Actions configured | |
[ 1.602088] nf_conntrack version 0.5.0 (2865 buckets, 11460 max) | |
[ 1.606231] xt_time: kernel timezone is -0000 | |
[ 1.611660] gre: GRE over IPv4 demultiplexor driver | |
[ 1.615782] ip_gre: GRE over IPv4 tunneling driver | |
[ 1.621731] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 1.625433] Initializing XFRM netlink socket | |
[ 1.631524] NET: Registered protocol family 10 | |
[ 1.655745] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 1.656039] NET: Registered protocol family 17 | |
[ 1.660184] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 1.664497] Bridge conntrack hooks registered | |
[ 1.677331] 8021q: 802.1Q VLAN Support v1.8 | |
[ 1.681752] Registering SWP/SWPB emulation handler | |
[ 1.706381] Registered character driver slp_flash_chrdev | |
[ 1.709579] Flash UID signiture check OK. | |
[ 1.710770] hctosys: unable to open rtc device (rtc0) | |
[ 1.722316] ps_bridge_main_init 828 path selection module init... | |
[ 1.727117] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. | |
[ 1.727696] Freeing unused kernel memory: 196K (8178b000 - 817bc000) | |
- preinit - | |
- regular preinit - | |
[ 3.385049] jffs2: notice: (206) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. | |
switching to jffs2 | |
tmp/virtual_art.bin | |
- init - | |
Please press Enter to activate this console. [ 5.378599] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 1 | |
[ 5.378642] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist! | |
[ 5.385152] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus | |
[ 5.391044] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000 | |
[ 5.398306] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000 | |
[ 5.405443] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xc | |
[ 5.412343] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit! | |
[ 5.417692] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit! | |
[ 5.424237] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist! | |
[ 5.430637] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist! | |
[ 5.436953] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 1 | |
[ 5.442561] ssdk_plat_init start | |
[ 7.595031] random: nonblocking pool is initialized | |
[ 7.854885] ssdk_mp_reset_init[739]:INFO:MP reset successfully! | |
[ 7.854947] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully! | |
[ 7.860866] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded! | |
[ 7.867362] regi_init[3604]:INFO:Initializing SCOMPHY! | |
[ 9.000952] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:bfc, ssdk_led_src_id:0 | |
[ 9.001084] ssdk_switch_register[1710]:INFO:Chip version 0xee | |
[ 9.008162] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist | |
[ 9.013743] ssdk_switch_register[1744]:INFO:polling is selected | |
[ 9.021921] regi_init[3614]:INFO:Initializing SCOMPHY Done!! | |
[ 9.027633] regi_init[3637]:INFO:qca-ssdk module init succeeded! | |
[ 10.100305] EXT_PORT0 ->SignalDetect = 0x0, Sync = 0x0, Link = 0x0 | |
[ 10.106734] EXT_PORT1 -> SignalDetect = 0x0, Sync = 0x0, Link = 0x0 | |
[ 10.110876] vlan1: mbr[0x20001] untag[0x1] pvid[1] | |
[ 10.112124] vlan2: mbr[0x20002] untag[0x2] pvid[2] | |
[ 10.116995] vlan3: mbr[0x20004] untag[0x4] pvid[3] | |
[ 10.121760] vlan4: mbr[0x20008] untag[0x8] pvid[4] | |
[ 10.126779] vlan5: mbr[0x30000] untag[0x10000] pvid[5] | |
[ 10.130974] rtl8367d(per port vlan) set wan port = -1 | |
[ 10.144161] gpio 22 request success. | |
[ 10.198024] GMAC2(8ed88480) Invalid MAC@ - using aa:2d:c0:40:22:fe | |
[ 10.199250] ********************************************************** | |
[ 10.203088] * NSS Data Plane driver | |
[ 10.209634] ********************************************************** | |
[ 10.624523] nss_driver - fw of size 759872 bytes copied to load addr: 40000000, nss_id : 0 | |
[ 10.626048] Supported Frequencies - | |
[ 10.631669] 850 MHz 1 GHz | |
[ 10.637307] | |
[ 10.638186] 7f15c680: set sdma 8f133200 | |
[ 10.639995] node size 2 # items 4 | |
[ 10.643217] memory: 40000000 268435456 (avl 193814528) items 4 active_cores 1 | |
[ 10.646721] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 | |
[ 10.653811] 7f15c680: NSS core 0 DDR from 40000000 to 40800000 | |
[ 10.660686] 7f15c680: meminfo init succeed | |
[ 10.696278] node size 2 # items 4 | |
[ 10.696303] memory: 40000000 268435456 (avl 193921024) items 4 active_cores 1 | |
[ 10.698571] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 | |
[ 10.705735] 7f15c680: nss core 0 booted successfully | |
[ 10.722962] nf_conntrack_rtsp v0.7 loading | |
[ 10.729242] nf_nat_rtsp v0.7 loading | |
[ 10.743878] QCA multicast snooping installed successfully | |
[ 10.749591] Registered character driver slp_gpio_chrdev | |
[ 12.095461] ECM init | |
[ 12.095531] ECM database jhash random seed: 0x5063b784 | |
[ 12.115176] ECM init complete | |
dev.nss.general.redirect = 1 | |
[ 12.134589] mem_manager: module license 'Proprietary' taints kernel. | |
[ 12.134615] Disabling lock debugging due to kernel taint | |
[ 19.848437] wlan: [394:I:ANY] =======ol_if_register_wifi3_0========== | |
[ 19.848437] | |
[ 19.848475] wlan: [394:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:7f83a0fc | |
[ 19.855335] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss | |
[ 19.901882] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820 | |
[ 22.655405] Subsystem error monitoring/handling services are up | |
[ 22.655758] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up | |
[ 22.656039] rpmsg_dev_probe: No pm domain | |
[ 22.668262] wlan: [394:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 | |
[ 22.672160] remoteproc remoteproc1: powering up q6v5_wcss_userpd1 | |
[ 22.680339] rpmsg_dev_probe: No pm domain | |
[ 22.694554] q6v5_wcss_userpd1 wcss powered up successfully | |
[ 22.696985] diag: Receiving feature mask length more than Apps support | |
[ 22.697013] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 8182e6ac | |
[ 22.705470] Subsystem error monitoring/handling services are up | |
[ 22.714182] remoteproc remoteproc1: remote processor q6v5_wcss_userpd1 is now up | |
[ 22.714200] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 | |
[ 22.726325] cnss[2]: INFO: device_id : 65532 mem mode : [2] | |
[ 22.727578] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1 | |
[ 22.727579] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2503ffff, fw_build_timestamp: 2021-06-07 11:35, otp_version: 0x0s | |
[ 22.727600] cnss[2]: INFO: Boardid from dts:24,FW:ff | |
[ 22.743063] cnss[2]: INFO: BDF location : 0x4c400000 | |
[ 22.743068] cnss[2]: INFO: BDF IPQ5018/bdwlan.b24 size 131072 | |
[ 22.743935] cnss[2]: INFO: per device BDF location : 0x4c420000 | |
[ 22.744073] cnss[2]: INFO: CALDATA IPQ5018/caldata.bin size 131072 offset 0x20000 | |
[ 22.788333] wlan: [394:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 | |
[ 22.795920] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 15 seconds | |
[ 22.803698] cnss[2]: INFO: FW ready received for device 0xfffc | |
[ 22.812620] wlan: [394:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode | |
[ 22.818367] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 | |
[ 22.828891] wlan: [394:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 | |
[ 22.832440] wlan: [394:I:ANY] __ol_ath_attach: Allocated soc 89980480 | |
[ 22.841208] wlan: [394:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully | |
[ 22.886889] wlan: [394:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4 | |
[ 22.887729] wlan: [394:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc | |
[ 22.895485] wlan: [394:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1d | |
[ 22.904856] wlan: [394:I:ANY] __ol_ath_attach: dev name soc0 | |
[ 22.914353] wlan: [394:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 8edf6000 | |
[ 22.919961] meshNetlinkInit | |
[ 22.930568] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.930599] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.940159] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.950154] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.960116] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.970105] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 22.980079] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 22.990064] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 23.000043] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 23.010037] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 23.020050] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 23.030010] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 23.039974] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 23.049955] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 23.059981] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 23.069978] wlan: [394:I:ANY] htc_wmi_init: HT Create . 899e9000 | |
[ 23.079912] wlan: [394:I:ANY] htc_wmi_init: Skipping BMI Done | |
[ 23.086065] wlan: [394:I:ANY] htc_wmi_init: host_enable 0 | |
[ 23.099184] wlan: [394:I:ANY] ol_target_init_complete: CDP soc attach success | |
[ 23.099214] wlan: [394:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 | |
[ 23.105456] wlan: [394:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 899e9000, ep 2, value 1 | |
[ 23.114110] wlan: [45:I:TIF] HE_CAP Info = 9a08010d | |
[ 23.122663] wlan: [45:I:TIF] Num HW modes = 1 | |
[ 23.127175] wlan: [45:I:TIF] Num PHY = 1 | |
[ 23.131633] wlan: [45:I:TIF] FW Build Version (Ext.) = 0 | |
[ 23.135651] wlan: [45:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 | |
[ 23.140901] wlan: [45:I:TIF] Preferred HW Mode = 0 Num Radios = 1 | |
[ 23.147674] wlan: [45:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes | |
[ 23.153680] wlan: [45:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0 | |
[ 23.168749] [MESH]wlan_mesh_pdev_create_handler: mesh initialized | |
[ 23.176573] [WPS]Attach WPS module to pdev=[0]. | |
[ 23.182660] wlan: [45:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success | |
[ 23.186789] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 23.193952] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 23.201362] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 23.208752] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 23.216335] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 23.223469] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 23.231083] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 23.238712] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 23.245881] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 23.253421] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 23.261088] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 23.269211] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 23.276101] wlan: [45:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:8edf6000 | |
[ 23.285404] wlan: [45:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9 | |
[ 23.292047] wlan: [45:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success | |
[ 23.402797] wlan: [45:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 | |
[ 23.446931] wlan: [45:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 | |
[ 23.446967] wlan: [45:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528 | |
[ 23.446967] | |
[ 23.454275] wlan: [394:I:ANY] ol_ath_connect_htc: WMI is ready | |
[ 23.471560] wlan: [394:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d | |
[ 23.471710] wlan: [394:E:NSS] [nss-wifili]: pdev:87ce0480 radio_ifnum:28 scheme_id:0 radio_priority:1 | |
[ 23.483527] wlan: [394:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL | |
[ 23.490447] wlan: [394:I:ANY] ol_ath_soc_attach: connect HTC | |
[ 23.497172] wlan: [394:I:ANY] ol_ath_soc_attach: bypasswmi : 0 | |
[ 23.503071] wlan: [394:I:MSCS] qca_mscs_module_init: | |
[ 23.503071] ****QCA MSCS Initialization Done**** SoC 89980480 | |
[ 23.508709] wlan: [394:I:ANY] ol_ath_soc_attach: UMAC attach | |
[ 23.519444] wlan: [394:I:ANY] __ol_ath_attach: pdev_netdev name wifi0 | |
[ 23.525293] wlan: [394:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target | |
[ 23.531598] wlan: [394:I:ANY] __ol_ath_attach: BURSTING enabled by default | |
[ 23.538502] wlan: [394:I:ANY] ol_ath_pdev_attach: interface_id 0 | |
[ 23.545356] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported | |
[ 23.551480] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 | |
[ 23.558876] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 | |
[ 23.568514] wlan: [394:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update | |
[ 23.582220] wlan: [394:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update | |
[ 23.591247] wlan: [394:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case | |
[ 23.600335] wlan: [394:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:02:02 soc: soc0 pdev: wifi0 | |
[ 23.607464] wlan: [394:I:MBSSIE] ieee80211_mbss_attach: :> | |
[ 23.618867] wlan: [394:I:MBSSIE] ieee80211_mbss_attach: :< | |
[ 23.624308] wlan: [394:I:ANY] ol_resmgr_create: OL Resmgr Init-ed | |
[ 23.630071] wlan: [394:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 | |
[ 23.636411] wlan: [394:I:ANY] wlan_scan_update_channel_list: num_chan: 11 | |
[ 23.642774] wlan: [394:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:7f54fd34 | |
[ 23.649774] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled | |
[ 23.650744] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (1) channel frequency 2417 blocked from cfg | |
[ 23.650752] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (2) channel frequency 2422 blocked from cfg | |
[ 23.650758] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (3) channel frequency 2427 blocked from cfg | |
[ 23.650764] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (4) channel frequency 2432 blocked from cfg | |
[ 23.650770] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (5) channel frequency 2442 blocked from cfg | |
[ 23.650776] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (6) channel frequency 2447 blocked from cfg | |
[ 23.650782] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (7) channel frequency 2452 blocked from cfg | |
[ 23.650788] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (8) channel frequency 2457 blocked from cfg | |
[ 23.650795] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (9) channel frequency 2467 blocked from cfg | |
[ 23.650801] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (10) channel frequency 2472 blocked from cfg | |
[ 23.650818] wlan: [394:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 4096 | |
[ 23.650880] wlan: [394:I:ANY] __ol_ath_attach: needed_headroom reservation 44 | |
[ 23.650888] wlan: [394:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 | |
[ 23.650914] wlan: [394:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 | |
[ 23.651159] wlan: [394:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x87ce0480, wdev: 0x87cf7c1c, wiphy: 0x89a2e560, netdev: 0x87ce0000 | |
[ 23.652085] wlan: [394:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0 | |
[ 23.652632] wlan: [394:E:QLD] qld_register: Handle or address is NULL | |
[ 23.652693] wlan: [394:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = 87ce0480_radio_type = 2 | |
[ 23.652754] wlan: [394:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 | |
[ 23.652779] remoteproc remoteproc2: powering up q6v5_wcss_userpd2 | |
[ 23.657026] Subsystem error monitoring/handling services are up | |
[ 23.657083] remoteproc remoteproc2: remote processor q6v5_wcss_userpd2 is now up | |
[ 23.657142] wlan: [394:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 | |
[ 23.657159] cnss[41]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 15 seconds | |
[ 23.871546] cnss[41]: INFO: QMI WLFW service connected, state: 0x1 | |
[ 23.880173] cnss[41]: INFO: device_id : 65531 mem mode : [2] | |
[ 23.885993] cnss[41]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1 | |
[ 23.892657] cnss[41]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2503ffff, fw_build_timestamp: 2021-06-07 11:35, otp_version: 0xs | |
[ 23.900052] cnss[41]: INFO: Device BAR Info pa: 0x81e00000, va: 0x97800000, size: 0x200000 | |
[ 23.920661] cnss[41]: INFO: Boardid from dts:60,FW:ff | |
[ 23.946427] cnss[41]: INFO: BDF location : 0x4d300000 | |
[ 23.946453] cnss[41]: INFO: BDF qcn6122/bdwlan.b60 size 131072 | |
[ 23.951302] cnss[41]: INFO: per device BDF location : 0x4d320000 | |
[ 23.956439] cnss[41]: INFO: CALDATA qcn6122/caldata_1.bin size 131072 offset 0x20000 | |
[ 23.984861] cnss[41]: INFO: FW ready received for device 0xfffb | |
[ 23.985035] wlan: [394:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode | |
[ 23.989900] cnss[41]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 | |
[ 24.006531] wlan: [394:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 | |
[ 24.006841] wlan: [394:I:ANY] __ol_ath_attach: Allocated soc 87600480 | |
[ 24.014491] wlan: [394:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully | |
[ 24.026127] wlan: [394:E:QDF] CONFIG creation failed | |
[ 24.031647] wlan: [394:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc | |
[ 24.036498] wlan: [394:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1e | |
[ 24.045645] wlan: [394:I:ANY] __ol_ath_attach: dev name soc1 | |
[ 24.055165] wlan: [394:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 8edffa00 | |
[ 24.060660] meshNetlinkInit | |
[ 24.071407] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.071438] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.080945] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.090894] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.100897] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.110834] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.120837] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.131539] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.141023] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.150818] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.160776] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.170766] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.180736] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 24.190717] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.200694] wlan: [394:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 24.210704] wlan: [394:I:ANY] htc_wmi_init: HT Create . 875ba000 | |
[ 24.220640] wlan: [394:I:ANY] htc_wmi_init: Skipping BMI Done | |
[ 24.226794] wlan: [394:I:ANY] htc_wmi_init: host_enable 0 | |
[ 24.242877] wlan: [394:I:ANY] ol_target_init_complete: CDP soc attach success | |
[ 24.242909] wlan: [394:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 | |
[ 24.249192] wlan: [394:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 875ba000, ep 2, value 1 | |
[ 24.257885] wlan: [45:I:TIF] HE_CAP Info = 9a08010d | |
[ 24.266259] wlan: [45:I:TIF] Num HW modes = 1 | |
[ 24.270769] wlan: [45:I:TIF] Num PHY = 1 | |
[ 24.275328] wlan: [45:I:TIF] FW Build Version (Ext.) = 0 | |
[ 24.279279] wlan: [45:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 | |
[ 24.284579] wlan: [45:I:TIF] Preferred HW Mode = 0 Num Radios = 1 | |
[ 24.291353] wlan: [45:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes | |
[ 24.297386] wlan: [45:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0 | |
[ 24.311210] [MESH]wlan_mesh_pdev_create_handler: mesh initialized | |
[ 24.320907] wlan: [45:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success | |
[ 24.326013] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 24.333103] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 24.341291] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 24.348028] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 24.355474] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 24.362617] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 24.370223] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 24.377862] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 24.385049] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 24.392563] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 24.400248] wlan: [45:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 24.407441] wlan: [45:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 24.414976] wlan: [45:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:8edffa00 | |
[ 24.423101] wlan: [45:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is disabled | |
[ 24.433536] wlan: [45:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9 | |
[ 24.440681] wlan: [45:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success | |
[ 24.551682] wlan: [45:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 | |
[ 24.738136] wlan: [45:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 | |
[ 24.738173] wlan: [45:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528 | |
[ 24.738173] | |
[ 24.745528] wlan: [394:I:ANY] ol_ath_connect_htc: WMI is ready | |
[ 24.762617] wlan: [394:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d | |
[ 24.762918] wlan: [394:E:NSS] [nss-wifili]: pdev:86fc0480 radio_ifnum:29 scheme_id:1 radio_priority:0 | |
[ 24.774856] wlan: [394:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL | |
[ 24.781389] wlan: [394:I:ANY] ol_ath_soc_attach: connect HTC | |
[ 24.788361] wlan: [394:I:ANY] ol_ath_soc_attach: bypasswmi : 0 | |
[ 24.794273] wlan: [394:I:ANY] ol_ath_soc_attach: UMAC attach | |
[ 24.799931] wlan: [394:I:ANY] __ol_ath_attach: pdev_netdev name wifi1 | |
[ 24.805717] wlan: [394:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target | |
[ 24.812042] wlan: [394:I:ANY] __ol_ath_attach: BURSTING enabled by default | |
[ 24.818932] wlan: [394:I:ANY] ol_ath_pdev_attach: interface_id 1 | |
[ 24.825780] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported | |
[ 24.831922] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 | |
[ 24.839313] wlan: [394:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 5150, hi_5g = 5895 | |
[ 24.848948] wlan: [394:I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update | |
[ 24.863004] wlan: [394:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update | |
[ 24.871778] wlan: [394:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case | |
[ 24.880901] wlan: [394:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:9b:9b soc: soc1 pdev: wifi1 | |
[ 24.888174] wlan: [394:I:MBSSIE] ieee80211_mbss_attach: :> | |
[ 24.899555] wlan: [394:I:MBSSIE] ieee80211_mbss_attach: :< | |
[ 24.905018] wlan: [394:I:ANY] ol_resmgr_create: OL Resmgr Init-ed | |
[ 24.910764] wlan: [394:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 | |
[ 24.918608] wlan: [394:I:ANY] wlan_scan_update_channel_list: num_chan: 25 | |
[ 24.923495] wlan: [394:I:ANY] ol_ath_pdev_attach: Set global_ic[2], ptr:7f54fd34 | |
[ 24.930478] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled | |
[ 24.931488] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (1) channel frequency 5260 blocked from cfg | |
[ 24.931495] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (2) channel frequency 5280 blocked from cfg | |
[ 24.931501] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (3) channel frequency 5300 blocked from cfg | |
[ 24.931507] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (4) channel frequency 5320 blocked from cfg | |
[ 24.931514] wlan: [394:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: (5) channel frequency 5825 blocked from cfg | |
[ 24.931530] wlan: [394:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 4096 | |
[ 24.931591] wlan: [394:I:ANY] __ol_ath_attach: needed_headroom reservation 44 | |
[ 24.931598] wlan: [394:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41 | |
[ 24.932391] wlan: [394:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x86fc0480, wdev: 0x86fd7c1c, wiphy: 0x87567160, netdev: 0x86fc0000 | |
[ 24.934718] wlan: [394:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0 | |
[ 24.935707] wlan: [394:E:QLD] qld_register: Handle or address is NULL | |
[ 24.935766] wlan: [394:I:ANY] wlan_pdev_operation: num_radios=2, wifi_radios[1].sc = 86fc0480_radio_type = 2 | |
[ 24.935796] wlan: [394:I:ANY] init_ath_pci_3_0: .6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) | |
[ 25.541728] configuring additional NSS pbufs | |
[ 25.545366] additional pbufs of size 802816 got added to NSS | |
mcbAlignFromPool(219). Fail to alloc 270000 bytes from mcb Generic, alloc from heap [<0x76d6b010>]. | |
mcbAlignFromPool(219). Fail to alloc 432000 bytes from mcb Generic, alloc from heap [<0x76d43010>]. | |
00.00.25.813274 MCSD plugin info : Initializing plugin manager | |
mcastds: Entering evloopRun | |
[ 26.172582] gpio 38 request success. | |
[ 26.403341] gpio 19 request success. | |
[ 26.450326] gpio 15 request success. | |
checkOrResetFactoryInfo(913). Factory Info verified | |
=========port mng register========= | |
<ucconv> usrconfPathPrepare(37). /tmp/etc/config doesn't exit, Now create it. | |
mcbAlignFromPool(219). Fail to alloc 270000 bytes from mcb Generic, alloc from heap [<0x76d13010>]. | |
[ 26.656660] mc_attach: enabled snooping on br-lan. | |
[ 26.661854] device eth0.1 entered promiscuous mode | |
[ 26.665435] device eth0.2 entered promiscuous mode | |
[ 26.670418] device eth0.3 entered promiscuous mode | |
[ 26.675119] device eth0.4 entered promiscuous mode | |
00.00.26.672347 MCSD netd ERR : netdBridgeLinkNLCB Read err[ 26.679762] device eth0.5 entered promiscuous mode | |
or, Create it again | |
[ 26.841172] lan ip is 0xc0a80101 | |
[ 26.869346] ----IGMP init begin------ | |
[ 26.869369] wan_dev_index = 255 lan_dev_name=br-lan wan_dev_name=eth0.6 | |
[ 26.872074] ----IGMP has been loaded------ | |
deviceInfoInit(785). softver:1.0.5 Build 210607 Rel.52921n | |
[ 27.163056] wlan: [452:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :34:f7:16:eb:3d:b8 ret: 0 | |
[ 27.188370] wlan: [452:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :34:f7:16:eb:3d:ba ret: 0 | |
br_scan_ifaces(47). Scanning bridge netif... | |
[ 28.138246] tp_meshing events being sent to PID:452 | |
event_sock_enable(1018). enabled netlink socket at 23 with own pid 452 | |
=========port mng init========= | |
portManageDeviceAlloc(499). add a new dev 34:f7:16:eb:3d:b8 | |
portManageDeviceDbInit(1315). init self device | |
portManageSelfNameUpdate(218). update self name :TL-XDR3060?..??.Turbo?.. | |
cfgStrParse(1183). cfg str auto,1000M,2.5G,, len :16 | |
cfgStrParse(1183). cfg str 3,2,1,0,4,, len :10 | |
cfgStrParse(1183). cfg str RJ45,RJ45,RJ45,RJ45,SFP,, len :24 | |
cfgStrParse(1183). cfg str 1000M,1000M,1000M,1000M,auto,, len :29 | |
[ 28.319107] device eth0 entered promiscuous mode | |
[ 28.321808] br-lan: port 5(eth0.5) entered forwarding state | |
[ 28.322878] br-lan: port 5(eth0.5) entered forwarding state | |
[ 28.328200] br-lan: port 4(eth0.4) entered forwarding state | |
[ 28.333700] br-lan: port 4(eth0.4) entered forwarding state | |
[ 28.339301] br-lan: port 3(eth0.3) entered forwarding state | |
[ 28.344813] br-lan: port 3(eth0.3) entered forwarding state | |
[ 28.350367] br-lan: port 2(eth0.2) entered forwarding state | |
[ 28.355965] br-lan: port 2(eth0.2) entered forwarding state | |
[ 28.361476] br-lan: port 1(eth0.1) entered forwarding state | |
[ 28.367068] br-lan: port 1(eth0.1) entered forwarding state | |
lanv6LocalIpv6: fe80::36f7:16ff:feeb:3db8 | |
[ 28.402980] vlan1: mbr[0x20001] untag[0x1] pvid[1] | |
[ 28.403333] vlan2: mbr[0x20002] untag[0x2] pvid[2] | |
[ 28.407303] vlan3: mbr[0x20004] untag[0x4] pvid[3] | |
[ 28.411757] vlan4: mbr[0x20008] untag[0x8] pvid[4] | |
[ 28.416852] vlan5: mbr[0x30000] untag[0x10000] pvid[5] | |
[ 28.420976] rtl8367d(per port vlan) set wan port = -1 | |
[ 30.295601] gpio 20 request success. | |
[ 30.500773] gpio 16 request success. | |
[ 30.516337] wlan: [452:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :34:f7:16:eb:3d:b8 ret: 0 | |
[ 30.517209] wlan: [452:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :34:f7:16:eb:3d:ba ret: 0 | |
[ 30.527493] wlan: [452:I:ANY] wlan_scan_update_channel_list: num_chan: 13 | |
[ 30.534999] wlan: [452:I:ANY] ieee80211_setctry_tryretaining_curchan: [442] Skipping current channel retention during set_country operation | |
[ 30.541577] wlan: [452:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0 | |
[ 30.553913] wlan: [452:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: CN ret: 0 | |
[ 30.561525] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 30.569986] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 34:f7:16:eb:3d:b8 | |
[ 30.577765] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x87ce0480, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 30.577765] | |
[ 30.585391] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 30.585391] | |
[ 30.596052] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 30.605297] wlan: [452:I:ANY] ieee80211_vap_setup: Disable vht SU BFEE by default in AP mode | |
[ 30.612264] wlan: [452:I:ANY] ieee80211_vap_setup: Disable HE SU BFEE by default in AP mode | |
[ 30.620657] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:0|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 30.628726] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x32 | |
[ 30.643328] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 30.649550] wlan: [452:I:ANY] MBO Initialized | |
[ 30.662912] wlan: [452:I:ANY] OCE Initialized | |
[ 30.667438] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 30 nss_id -1 | |
[ 30.671756] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28 | |
[ 30.680768] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 30.687175] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 8579b480 : if_num 30 | |
[ 30.714884] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 30.714913] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 30.723475] wlan: [452:I:ANY] VAP device ath0 created osifp: (8579b480) os_if: (850e4000) | |
[ 30.728475] [MESH]set vap:ath0 backhaul:0 | |
[ 30.736128] [WPS]Set vdev=[ath0] wpsCapable=[1] by ini | |
[ 30.740290] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 30.744993] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 30.752880] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 30.762377] 8021q: adding VLAN 0 to HW filter on device ath0 | |
[ 30.769316] device ath0 entered promiscuous mode | |
[ 30.774161] br-lan: port 6(ath0) entered forwarding state | |
[ 30.778459] br-lan: port 6(ath0) entered forwarding state | |
[ 30.784703] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 30.789301] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 3a:f7:16:eb:3d:b8 | |
[ 30.797144] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x87ce0480, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 30.797144] | |
[ 30.805016] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 30.805016] | |
[ 30.815595] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 30.824623] wlan: [452:I:ANY] ieee80211_vap_setup: Disable vht SU BFEE by default in AP mode | |
[ 30.831696] wlan: [452:I:ANY] ieee80211_vap_setup: Disable HE SU BFEE by default in AP mode | |
[ 30.840057] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:0|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 30.847990] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x32 | |
[ 30.862321] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 30.868568] wlan: [452:I:ANY] MBO Initialized | |
[ 30.881878] wlan: [452:I:ANY] OCE Initialized | |
[ 30.886420] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 31 nss_id -1 | |
[ 30.890704] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28 | |
[ 30.899665] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 30.906132] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 85798480 : if_num 31 | |
wlan_ioctl_set_dym_bdf_nf(2367). [ifname=ath0] set dym bdf nf enable=1 threshold=15. | |
[ 30.934876] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 30.934904] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 30.941809] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2417MHz) is already in the list | |
[ 30.947872] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2422MHz) is already in the list | |
[ 30.956968] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2427MHz) is already in the list | |
[ 30.966255] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2432MHz) is already in the list | |
[ 30.975543] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2442MHz) is already in the list | |
[ 30.984830] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2447MHz) is already in the list | |
[ 30.994110] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2452MHz) is already in the list | |
[ 31.003407] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2457MHz) is already in the list | |
[ 31.012700] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2467MHz) is already in the list | |
[ 31.022031] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2472MHz) is already in the list | |
[ 31.032844] wlan: [452:I:ANY] VAP device guest0 created osifp: (85798480) os_if: (850ac000) | |
[ 31.041196] [MESH]set vap:guest0 backhaul:0 | |
[ 31.049015] [WPS]Set vdev=[guest0] wpsCapable=[0] by ini | |
[ 31.053349] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 31.058560] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 31.066314] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 31.073447] 8021q: adding VLAN 0 to HW filter on device guest0 | |
[ 31.082596] device guest0 entered promiscuous mode | |
[ 31.087758] br-lan: port 7(guest0) entered forwarding state | |
[ 31.092003] br-lan: port 7(guest0) entered forwarding state | |
[ 31.098250] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 31.102988] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 3e:f7:16:eb:3d:b8 | |
[ 31.110708] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x87ce0480, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 31.110708] | |
[ 31.118400] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 31.118400] | |
[ 31.129101] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 31.138326] wlan: [452:I:ANY] ieee80211_vap_setup: Disable vht SU BFEE by default in AP mode | |
[ 31.145321] wlan: [452:I:ANY] ieee80211_vap_setup: Disable HE SU BFEE by default in AP mode | |
[ 31.153664] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:0|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 31.161763] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x32 | |
[ 31.176479] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 31.182564] wlan: [452:I:ANY] MBO Initialized | |
[ 31.196052] wlan: [452:I:ANY] OCE Initialized | |
[ 31.200468] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 32 nss_id -1 | |
[ 31.204790] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28 | |
[ 31.213841] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 31.220214] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 875bc480 : if_num 32 | |
[ 31.244885] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 31.244915] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 31.251806] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2417MHz) is already in the list | |
[ 31.257881] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2422MHz) is already in the list | |
[ 31.266980] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2427MHz) is already in the list | |
[ 31.276264] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2432MHz) is already in the list | |
[ 31.285550] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2442MHz) is already in the list | |
[ 31.294840] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2447MHz) is already in the list | |
[ 31.304119] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2452MHz) is already in the list | |
[ 31.313415] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2457MHz) is already in the list | |
[ 31.322708] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2467MHz) is already in the list | |
[ 31.331992] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2472MHz) is already in the list | |
[ 31.342452] wlan: [452:I:ANY] VAP device bhap0 created osifp: (875bc480) os_if: (8500c000) | |
[ 31.351047] [MESH]set vap:bhap0 backhaul:1 | |
[ 31.359021] [WPS]Set vdev=[bhap0] wpsCapable=[0] by ini | |
[ 31.363273] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 31.368038] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 31.376057] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 31.382867] 8021q: adding VLAN 0 to HW filter on device bhap0 | |
[ 31.391722] device bhap0 entered promiscuous mode | |
[ 31.397136] br-lan: port 8(bhap0) entered forwarding state | |
[ 31.401658] br-lan: port 8(bhap0) entered forwarding state | |
[ 31.407763] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 31.412482] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 42:f7:16:eb:3d:b8 | |
[ 31.420123] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x87ce0480, opmode=IEEE80211_M_STA, flags=0x1 | |
[ 31.420123] | |
[ 31.427986] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 31.427986] | |
[ 31.438139] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 31.447549] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:1|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 31.454386] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x7 | |
[ 31.468758] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 31.475078] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 33 nss_id -1 | |
[ 31.488263] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28 | |
[ 31.497349] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 31.503804] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 875bb480 : if_num 33 | |
[ 31.511991] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 31.519422] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 31.527441] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2417MHz) is already in the list | |
[ 31.533460] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2422MHz) is already in the list | |
[ 31.542699] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2427MHz) is already in the list | |
[ 31.551882] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2432MHz) is already in the list | |
[ 31.561182] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2442MHz) is already in the list | |
[ 31.570493] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2447MHz) is already in the list | |
[ 31.579740] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2452MHz) is already in the list | |
[ 31.589024] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2457MHz) is already in the list | |
[ 31.598312] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2467MHz) is already in the list | |
[ 31.607600] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (2472MHz) is already in the list | |
[ 31.618083] wlan: [452:I:ANY] VAP device wdscli0 created osifp: (875bb480) os_if: (85128000) | |
[ 31.626665] [MESH]set vap:wdscli0 backhaul:1 | |
[ 31.634994] [WPS]Set vdev=[wdscli0] wpsCapable=[1] by ini | |
[ 31.639724] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 31.644309] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 31.652186] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 31.659053] 8021q: adding VLAN 0 to HW filter on device wdscli0 | |
[ 31.667856] device wdscli0 entered promiscuous mode | |
[ 31.673198] br-lan: port 9(wdscli0) entered forwarding state | |
[ 31.677981] br-lan: port 9(wdscli0) entered forwarding state | |
[ 31.692156] wlan: [452:I:ANY] wlan_scan_update_channel_list: num_chan: 13 | |
[ 31.693580] wlan: [452:I:ANY] wlan_scan_update_channel_list: num_chan: 13 | |
[ 31.698430] wlan: [452:I:ANY] ieee80211_setctry_tryretaining_curchan: [442] Skipping current channel retention during set_country operation | |
[ 31.704738] wlan: [452:I:ANY] number of channels: 2G = 0 5G = 13, 6G = 0 | |
[ 31.717072] wlan: [452:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: CN ret: 0 | |
[ 31.725044] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 31.733106] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 34:f7:16:eb:3d:ba | |
[ 31.740835] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x86fc0480, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 31.740835] | |
[ 31.748774] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 31.748774] | |
[ 31.759198] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 31.768501] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 31.775376] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73 | |
[ 31.789751] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 31.795954] wlan: [452:I:ANY] MBO Initialized | |
[ 31.809386] wlan: [452:I:ANY] OCE Initialized | |
[ 31.813823] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 34 nss_id -1 | |
[ 31.818172] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29 | |
[ 31.827125] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 31.833539] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 883da480 : if_num 34 | |
[ 31.854882] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 31.854911] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 31.863016] wlan: [452:I:ANY] VAP device ath1 created osifp: (883da480) os_if: (85164000) | |
[ 31.868388] [MESH]set vap:ath1 backhaul:0 | |
[ 31.876123] [WPS]Set vdev=[ath1] wpsCapable=[1] by ini | |
[ 31.880416] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 31.885371] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 31.893069] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 31.900875] 8021q: adding VLAN 0 to HW filter on device ath1 | |
[ 31.908575] device ath1 entered promiscuous mode | |
[ 31.913937] br-lan: port 10(ath1) entered forwarding state | |
[ 31.918453] br-lan: port 10(ath1) entered forwarding state | |
[ 31.924227] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 31.929425] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 3a:f7:16:eb:3d:ba | |
[ 31.936773] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x86fc0480, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 31.936773] | |
[ 31.944409] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 31.944409] | |
[ 31.955206] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 31.964434] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 31.971361] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73 | |
[ 31.985744] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 31.991901] wlan: [452:I:ANY] MBO Initialized | |
[ 32.005289] wlan: [452:I:ANY] OCE Initialized | |
[ 32.009794] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 35 nss_id -1 | |
[ 32.014120] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29 | |
[ 32.023076] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 32.029536] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 883db480 : if_num 35 | |
[ 32.054900] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 32.054930] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 32.061863] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5260MHz) is already in the list | |
[ 32.067897] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5280MHz) is already in the list | |
[ 32.077026] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5300MHz) is already in the list | |
[ 32.086281] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5320MHz) is already in the list | |
[ 32.095622] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5825MHz) is already in the list | |
[ 32.106115] wlan: [452:I:ANY] VAP device bhap1 created osifp: (883db480) os_if: (851dc000) | |
[ 32.114594] [MESH]set vap:bhap1 backhaul:1 | |
[ 32.122584] [WPS]Set vdev=[bhap1] wpsCapable=[0] by ini | |
[ 32.127231] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 32.131581] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 32.139630] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 32.146586] 8021q: adding VLAN 0 to HW filter on device bhap1 | |
[ 32.155357] device bhap1 entered promiscuous mode | |
[ 32.160654] br-lan: port 11(bhap1) entered forwarding state | |
[ 32.165256] br-lan: port 11(bhap1) entered forwarding state | |
[ 32.171101] wlan: [452:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES | |
[ 32.176366] wlan: [452:I:ANY] osifp_create_wlan_vap: VDEV Create 3e:f7:16:eb:3d:ba | |
[ 32.183811] wlan: [452:I:ANY] wlan_vap_create: devhandle=0x86fc0480, opmode=IEEE80211_M_STA, flags=0x1 | |
[ 32.183811] | |
[ 32.191797] wlan: [452:I:ANY] ieee80211_vap_setup: [532] TP_FEATURE_MAX_STA_NUMBER=128 | |
[ 32.191797] | |
[ 32.201884] wlan: [452:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1 | |
[ 32.211286] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 32.218166] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x43 | |
[ 32.232515] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 32.238852] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 36 nss_id -1 | |
[ 32.252109] wlan: [452:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29 | |
[ 32.261233] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0 | |
[ 32.267657] wlan: [452:I:ANY] osif_nss_ol_vap_create: vap create 8577f480 : if_num 36 | |
[ 32.275754] wlan: [452:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 32.283233] wlan: [452:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 32.291323] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5260MHz) is already in the list | |
[ 32.297316] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5280MHz) is already in the list | |
[ 32.306420] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5300MHz) is already in the list | |
[ 32.315729] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5320MHz) is already in the list | |
[ 32.324995] wlan: [452:I:ANY] wlan_acs_block_channel_list: [EXT] Freq (5825MHz) is already in the list | |
[ 32.335566] wlan: [452:I:ANY] VAP device wdscli1 created osifp: (8577f480) os_if: (85124000) | |
[ 32.344024] [MESH]set vap:wdscli1 backhaul:1 | |
[ 32.352352] [WPS]Set vdev=[wdscli1] wpsCapable=[1] by ini | |
[ 32.357146] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: setting me mode 5 target type 0 | |
[ 32.361703] wlan: [452:I:ANY] osif_nss_vdev_set_cfg: Mcast command 5 | |
[ 32.369578] wlan: [452:I:ANY] ol_ath_vap_set_param: Implicitly disabling dependant feature igmp ME | |
[ 32.376459] 8021q: adding VLAN 0 to HW filter on device wdscli1 | |
[ 32.385305] device wdscli1 entered promiscuous mode | |
[ 32.390607] br-lan: port 12(wdscli1) entered forwarding state | |
[ 32.395372] br-lan: port 12(wdscli1) entered forwarding state | |
[ 32.402640] [MESH]set almac to 34:f7:16:eb:3d:b8 | |
[ 32.407487] [MESH]set almac to 34:f7:16:eb:3d:b8 | |
[wireless]ioctlCmdSetAlmac[816]Set almac 34:f7:16:eb:3d:b8 | |
[wireless]ioctlCmdSetAlmac[816]Set almac 34:f7:16:eb:3d:b8 | |
mesh_set_cap_info(112). set wan status 0, CAP AL MAC 00:00:00:0[ 32.445311] gpio 17 request success. | |
0:00:00 | |
ps_app_init 910 Path selection app init... | |
Init User_Flush_Fcache | |
=========port mng start========= | |
portManageSfpSpeedUpdate(1393). load dev 34:f7:16:eb:3d:b8 sfp speed from cfp file | |
portManageSetSfpSpeedList(1351). set dev 34:f7:16:eb:3d:b8 sfp speed, cnt:1 | |
portManageSetSfpSpeedList(1358). phy 4 set to 0 | |
port No:1 , autoState:0 | |
portManageSetSfpSpeed(1332). set port 4 to speed 0 | |
rmmod: can't unload 'br_guest_mark': unknown symbol in module, or unknown parameter | |
rmmod: can't unload 'br_guest_filter': unknown symbol in module,[ 32.593141] device guest0 left promiscuous mode | |
[ 32.598075] br-lan: port 7(guest0) entered disabled state | |
or unknown parameter | |
registerGuestFilter.68 gateway = 00000000 | |
[ 32.662333] br guest init: gateway = 00000000 | |
taskBootupPending(148). TASK 1019 finished pending and continue. | |
taskBootupPending(148). TASK 517 finished pending and continue. | |
taskBootupPending(148). TASK 519 finished pending and continue. | |
taskBootupPending(148). TASK 564 finished pending and continue. | |
taskBootupPending(148). TASK 520 finished pending and continue. | |
taskBootupPending(148). TASK 518 finished pending and continue. | |
----------enter phy_speed_set-------speed:5 | |
[ 33.027787] rtl8367sc set port = 0, speed = 10GEND | |
rtk_port_adminEnable_set.445 port:0, enable=0 | |
adSfpTxCtrl.465 gpio:34, value=1 | |
[ 33.716240] wlan: [452:I:ANY] ieee80211_ucfg_set_freq_internal: change ath0 channel, flush scan results. | |
[ 33.716961] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:0|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 33.717935] wlan: [0:I:ANY] ol_ath_twt_disable_complete_event_handler: twt disabled | |
[ 33.739607] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x22 | |
[ 33.747282] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:0|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:0|dl_muofdma_bfer:0 | |
[ 33.752933] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x2 | |
[ 33.769352] [WPS]Set role to ENROLLEE ifname=[wdscli1] | |
station_disassociate_all_event_callback(1735). <ERROR> cannot f[ 33.775392] wlan: [452:I:ANY] DES SSID SET=TP-LINK_3DB8 | |
[ 33.785488] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set ath0 pmfc=0. | |
[ 33.789485] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set ath0 pmfr=0. | |
ind ath0 in topology db | |
role_switch_handle_wan_detect_event(32[ 33.799242] wlan: [452:I:ANY] DES SSID SET=TPGuest_3DB8 | |
[ 33.808934] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set guest0 pmfc=0. | |
[ 33.812958] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set guest0 pmfr=0. | |
[ 33.821708] wlan: [452:I:ANY] DES SSID SET=zwvBGcdInZkuhtsel2vJiWLJn2ioTZ5Q | |
[ 33.827374] wlan: [452:I:ANY] ieee80211_ioctl_setparam_psk: set psksecret! | |
1). detect wan status 0, self_wan_status 0, cap_wan_status 0 | |
wlan_ioctl_set_allow_vap(701). set ifname=ath0 enable=0. | |
station_disassociate_all_event_callback(1735). <ERROR> cannot find ath0 in topology db | |
wlan_ioctl_set_allow_vap(701). set ifname=ath0 enable=1. | |
wlan_ioctl_set_allow_vap(701). set ifname=guest0 enable=0. | |
station_disassociate_all_event_callback(1735). <ERROR> cannot find guest0 in topology db | |
wlan_ioctl_set_allow_vap(701). set ifname=bhap0 enable=0. | |
station_disassociate_all_event_callback(1735). <ERROR> cannot find bhap0 in topology db | |
[ 33.950928] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set bhap0 pmfc=0. | |
[ 33.951118] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set bhap0 pmfr=0. | |
[ 33.957787] wlan: [452:I:ANY] [UNSPECIFIED] vap-2(bhap0):3e:f7:16:eb:3d:b8 WPA attach | |
[ 33.957787] | |
[ 33.963110] wlan: [452:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress | |
[ 33.972483] wlan: [452:I:ANY] osif_vap_pre_stop_sta: Stopping STA vap | |
[ 33.980961] br-lan: port 9(wdscli0) entered disabled state | |
wlan_ioctl_set_allow_vap(701). set ifname=bhap0 enable=1. | |
wla[ 33.989473] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set wdscli0 pmfc=0. | |
[ 33.998240] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set wdscli0 pmfr=0. | |
n_ioctl_set_allow_vap(701). set ifname=wdscli0 enable=0. | |
stati[ 34.007801] wlan: [452:I:ANY] ieee80211_ucfg_set_freq_internal: change ath1 channel, flush scan results. | |
[ 34.017745] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 34.019280] wlan: [0:I:ANY] ol_ath_twt_disable_complete_event_handler: twt disabled | |
[ 34.040295] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x63 | |
[ 34.048204] wlan: [452:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:0|ul_muofdma:0|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 34.054008] wlan: [452:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x43 | |
[ 34.069468] [WPS]Set role to ENROLLEE ifname=[wdscli1] | |
on_disassociate_all_event_callback(1735). <ERROR> cannot find at[ 34.076426] wlan: [452:I:ANY] DES SSID SET=TP-LINK_3DB8 | |
[ 34.086616] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set ath1 pmfc=0. | |
[ 34.090684] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set ath1 pmfr=0. | |
h1 in topology db | |
wlan_ioctl_set_allow_vap(701). set ifname=at[ 34.100373] wlan: [452:I:ANY] DES SSID SET=zwvBGcdInZkuhtsel2vJiWLJn2ioTZ5Q | |
[ 34.109850] wlan: [452:I:ANY] ieee80211_ioctl_setparam_psk: set psksecret! | |
h1 enable=0. | |
station_disassociate_all_event_callback(1735). <ERROR> cannot find ath1 in topology db | |
wlan_ioctl_set_allow_vap(701). set ifname=ath1 enable=1. | |
wlan_ioctl_set_allow_vap(701). set ifname=bhap1 enable=0. | |
station_disassociate_all_event_callback(1735). <ERROR> cannot find bhap1 in topology db | |
[ 34.233498] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set bhap1 pmfc=0. | |
[ 34.233880] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set bhap1 pmfr=0. | |
[ 34.240477] wlan: [452:I:ANY] [UNSPECIFIED] vap-1(bhap1):3a:f7:16:eb:3d:ba WPA attach | |
[ 34.240477] | |
[ 34.245787] wlan: [452:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress | |
[ 34.254895] wlan: [452:I:ANY] osif_vap_pre_stop_sta: Stopping STA vap | |
wlan_ioctl_set_allow_vap(701). set ifname=bhap1 enable=1. | |
wla[ 34.265934] wlan: [452:I:ANY] tp_cfg80211_set_pmfc: set wdscli1 pmfc=0. | |
[ 34.274813] wlan: [452:I:ANY] tp_cfg80211_set_pmfr: set wdscli1 pmfr=0. | |
[ 34.283012] [WPS]Set role to ENROLLEE ifname=[wdscli1] | |
[ 34.288409] [MESH](meshImple_CheckWlanReady): wlan driver isn't ready now!(dev_ath0) | |
[ 34.293226] [MESH](meshImple_CheckWlanReady): wlan driver isn't ready now!(dev_ath1) | |
n_ioctl_set_allow_vap(701). set ifname=wdscli1 enable=0. | |
fsLoadFinishCallback(132). JFFS LOAD: Exec file migration. | |
ctrlLoadFinishCallback(927). Exec smp.sh. | |
[ 34.974999] br-lan: port 12(wdscli1) entered disabled state | |
[ 37.978876] wlan: [368:E:ANY] ol_ath_get_chan_grade_info: RF characterization entries is empty | |
[ 37.979254] wlan: [368:E:ANY] ieee80211_acs_find_best_11ng_centerchan: ACS failed to derive the channel. Selecting random channel | |
[ 37.986467] wlan: [368:I:ANY] ******** ACS report ******** | |
[ 37.998121] wlan: [368:I:ANY] Channel | BSS | minrssi | maxrssi | NF | Ch load | spect load | sec_chan | SR bss | SR load | Ch Avil | Chan eff | NearBSS | Med BSS | Far BSS | Eff BSS | chan e | |
[ 38.003499] wlan: [368:I:ANY] ------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
[ 38.021256] wlan: [368:I:ANY] 2412( 1) 8 19 73 -94 35 0 0 1 4 19 192 1 4 3 520 100 | |
[ 38.038781] wlan: [368:I:ANY] 2417( 2) 3 35 57 -92 28 0 1 0 0 100 0 0 3 0 0 100 | |
[ 38.055903] wlan: [368:I:ANY] 2422( 3) 1 23 23 -90 26 0 1 0 0 100 0 0 0 1 0 100 | |
[ 38.073180] wlan: [368:I:ANY] 2427( 4) 1 34 34 -91 32 0 0 0 0 100 0 0 1 0 0 100 | |
[ 38.090442] wlan: [368:I:ANY] 2432( 5) 1 21 21 -91 73 0 1 0 0 100 0 0 0 1 0 100 | |
[ 38.107719] wlan: [368:I:ANY] 2437( 6) 6 23 50 -90 31 0 1 0 1 20 0 0 5 1 486 100 | |
[ 38.125003] wlan: [368:I:ANY] 2442( 7) 3 40 44 -92 26 0 1 0 0 100 0 0 3 0 0 100 | |
[ 38.142247] wlan: [368:I:ANY] 2447( 8) 1 19 19 -92 27 0 0 1 0 100 0 0 0 1 0 100 | |
[ 38.159549] wlan: [368:I:ANY] 2452( 9) 1 25 25 -93 30 0 1 0 0 100 0 0 0 1 0 100 | |
[ 38.176812] wlan: [368:I:ANY] 2457( 10) 1 22 22 -91 17 0 1 0 0 100 0 0 0 1 0 100 | |
[ 38.194085] wlan: [368:I:ANY] 2462( 11) 11 20 89 -91 36 0 0 0 0 18 183 2 1 8 545 100 | |
[ 38.211368] wlan: [368:I:ANY] 2467( 12) 0 0 0 -92 21 0 0 0 0 100 0 0 0 0 0 100 | |
[ 38.228632] wlan: [368:I:ANY] 2472( 13) 1 21 21 -93 19 0 0 0 0 100 0 0 0 1 0 100 | |
[ 38.246258] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report | |
[ 38.263698] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report | |
[ 38.272450] wlan: [368:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (293ms) | |
[ 38.281088] wlan: [368:E:ANY] ol_ath_get_chan_grade_info: RF characterization entries is empty | |
[ 38.289990] wlan: [368:E:ANY] ieee80211_acs_find_best_11na_centerchan: ACS failed to derive a channel. So selecting channel with least BSS | |
[ 38.298049] wlan: [368:I:ANY] ******** ACS report ******** | |
[ 38.310142] wlan: [368:I:ANY] Channel | BSS | minrssi | maxrssi | NF | Ch load | spect load | sec_chan | SR bss | SR load | Ch Avil | Chan eff | NearBSS | Med BSS | Far BSS | Eff BSS | chan e | |
[ 38.315708] wlan: [368:I:ANY] ------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
[ 38.333418] wlan: [368:I:ANY] 5180( 36) 8 5 17 -108 4 0 1 0 6 22 226 0 0 8 442 100 | |
[ 38.351055] wlan: [368:I:ANY] 5200( 40) 3 3 19 -108 1 0 1 0 13 21 212 0 0 3 471 100 | |
[ 38.368079] wlan: [368:I:ANY] 5220( 44) 10 5 75 -108 6 0 1 6 26 17 176 1 2 7 565 100 | |
[ 38.385551] wlan: [368:I:ANY] 5240( 48) 1 10 10 -107 12 0 1 1 16 23 238 0 0 1 419 100 | |
[ 38.402705] wlan: [368:I:ANY] 5260( 52) 4 10 70 -107 2 0 1 0 0 100 0 1 1 2 0 100 | |
[ 38.419908] wlan: [368:I:ANY] 5280( 56) 1 10 10 -107 2 0 1 0 0 100 0 0 0 1 0 100 | |
[ 38.437148] wlan: [368:I:ANY] 5300( 60) 0 0 0 -107 1 0 0 0 0 100 0 0 0 0 0 100 | |
[ 38.454474] wlan: [368:I:ANY] 5320( 64) 0 0 0 -107 1 0 0 0 0 100 0 0 0 0 0 100 | |
[ 38.471917] wlan: [368:I:ANY] 5745(149) 18 5 28 -107 8 0 1 0 0 100 0 0 0 18 0 100 | |
[ 38.489034] wlan: [368:I:ANY] 5765(153) 3 7 50 -107 1 0 1 0 0 100 0 0 1 2 0 100 | |
[ 38.506334] wlan: [368:I:ANY] 5785(157) 3 8 10 -106 5 0 1 0 0 100 0 0 0 3 0 100 | |
[ 38.523665] wlan: [0:I:ANY] mlme_vdev_start_continue_cb: phy changed, set ic_phy_changed=1 | |
[ 38.524298] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: vap(0): phymode=27, chwidth=1 | |
[ 38.524298] | |
[ 38.524298] | |
[ 38.524303] [MESH](meshImple_SetWlanReady): send wlan ready event!(dev_ath0) | |
[ 38.524338] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: clear ic_phy_changed=0, send phy change event | |
[ 38.549711] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: vap(2): phymode=27, chwidth=1 | |
[ 38.549711] | |
[ 38.549711] | |
[ 38.576947] wlan: [368:I:ANY] 5805(161) 5 5 27 -106 3 0 1 0 0 100 0 0 0 5 0 100 | |
[ 38.588981] wlan: [368:I:ANY] 5825(165) 0 0 0 -107 0 0 0 0 0 100 0 0 0 0 0 100 | |
[ 38.606481] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report | |
[ 38.623747] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report | |
[ 38.631994] wlan: [368:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (351ms) | |
[ 38.640438] wlan: [0:I:ANY] mlme_vdev_start_continue_cb: phy changed, set ic_phy_changed=1 | |
[ 38.649304] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: vap(0): phymode=31, chwidth=3 | |
[ 38.649304] | |
[ 38.649304] | |
[ 38.656739] [MESH](meshImple_SetWlanReady): send wlan ready event!(dev_ath1) | |
[ 38.668104] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: clear ic_phy_changed=0, send phy change event | |
[ 38.677092] wlan: [0:I:ANY] mlme_vdev_notify_up_complete_cb: vap(1): phymode=31, chwidth=3 | |
[ 38.677092] | |
[ 38.677092] | |
station_probe_event_callback(1670). ifname ath0 has invalid channel | |
[ 38.875141] nss_dp_do_priv_ioctl ioctl 35585 is not supported br_scan_ifaces(47). Scanning bridge netif... | |
topology_update_local_iface(3579). == Iface eth0.1 already exist... | |
topology_update_local_iface(3579). == Iface eth0.2 already exist... | |
topology_update_local_iface(3579). == Iface eth0.3 already exist... | |
topology_update_local_iface(3579). == Iface eth0.4 already exist... | |
topology_update_local_iface(3579). == Iface eth0.5 already exist... | |
topology_update_local_iface(3583). ++ Iface wdscli1 add to self device... | |
topology_update_local_iface(3583). ++ Iface wdscli0 add to self device... | |
topology_update_local_iface(3583). ++ Iface guest0 add to self device... | |
topology_update_local_iface(3583). ++ Iface bhap1 add to self device... | |
topology_update_local_iface(3583). ++ Iface ath0 add to self device... | |
topology_update_local_iface(3583). ++ Iface ath1 add to self device... | |
topology_update_local_iface(3583). ++ Iface bhap0 add to self device... | |
pair_allow_ext(1061). [mapd] allow RE with almac 34:f7:16:eb:3d:b8 to access! | |
start wss module. | |
Start wlan smart steer as g_wss_topology_status 0 Standalone. | |
wlan_bs_enable enable ath0 | |
wlan_bs_enable enable ath1 | |
role_selection_wlan_ready_handle(462). [role selection] no need to scan better ap for RE/unpaired device, return | |
lan_business_handle_wan_detect_result(1787). [lan business] Get wan status: port[-1] internet[0] state[0] | |
role_switch_handle_wan_detect_event(321). detect wan status 0, self_wan_status 0, cap_wan_status 0 | |
[ 43.364867] br-lan: port 2(eth0.2) entered forwarding state | |
[ 43.364945] br-lan: port 3(eth0.3) entered forwarding state | |
[ 43.369431] br-lan: port 4(eth0.4) entered forwarding state | |
[ 43.374988] br-lan: port 5(eth0.5) entered forwarding state | |
[ 43.404877] br-lan: port 1(eth0.1) entered forwarding state | |
[ 45.804842] br-lan: port 6(ath0) entered forwarding state | |
[ 46.404866] br-lan: port 8(bhap0) entered forwarding state | |
[ 46.964859] br-lan: port 10(ath1) entered forwarding state | |
[ 47.204867] br-lan: port 11(bhap1) entered forwarding state |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment