-
-
Save ptpt52/45d3f1927d3107e1f580cacbf5a75279 to your computer and use it in GitHub Desktop.
Hit any key within 10s to stop dump activity...resetting ... | |
Format: Log Type - Time(microsec) - Message - Optional Info | |
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00059 | |
S - IMAGE_VARIANT_STRING=MAABANAZA | |
S - OEM_IMAGE_VERSION_STRING=CRM | |
S - Boot Config, 0x000002c1 | |
B - 128 - PBL, Start | |
B - 1562 - bootable_media_detect_entry, Start | |
B - 1739 - bootable_media_detect_success, Start | |
B - 1744 - elf_loader_entry, Start | |
B - 10164 - auth_hash_seg_entry, Start | |
B - 10525 - auth_hash_seg_exit, Start | |
B - 174921 - elf_segs_hash_verify_entry, Start | |
B - 237561 - PBL, End | |
B - 192638 - SBL1, Start | |
B - 254034 - GCC [RstStat:0x10, RstDbg:0x400100] WDog Stat : 0x4 | |
B - 262330 - clock_init, Start | |
D - 7289 - clock_init, Delta | |
B - 269803 - boot_flash_init, Start | |
D - 2775 - boot_flash_init, Delta | |
B - 273890 - boot_config_data_table_init, Start | |
D - 793 - boot_config_data_table_init, Delta - (575 Bytes) | |
B - 287035 - Boot Setting : 0x00023ecc | |
B - 289902 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4 | |
B - 300303 - sbl1_ddr_set_params, Start | |
B - 305427 - Pre_DDR_clock_init, Start | |
B - 307226 - Pre_DDR_clock_init, End | |
B - 951600 - do ddr sanity test, Start | |
D - 30 - do ddr sanity test, Delta | |
B - 956266 - Image Load, Start | |
D - 132828 - QSEE Image Loaded, Delta - (578956 Bytes) | |
B - 1090009 - Image Load, Start | |
D - 5734 - DEVCFG Image Loaded, Delta - (13592 Bytes) | |
B - 1095956 - Image Load, Start | |
D - 100528 - APPSBL Image Loaded, Delta - (417230 Bytes) | |
B - 1196576 - QSEE Execution, Start | |
D - 61 - QSEE Execution, Delta | |
B - 1203042 - SBL1, End | |
D - 1012905 - SBL1, Delta | |
S - Flash Throughput, 4764 KB/s (1011025 Bytes, 212210 us) | |
S - DDR Frequency, 666 MHz | |
S - Core 0 Frequency, 800 MHz | |
U-Boot 2016.01 (Aug 12 2021 - 09:21:56 +0000) | |
DRAM: smem ram ptable found: ver: 1 len: 4 | |
256 MiB | |
NAND: QPIC controller support serial NAND | |
ID = 41c841c8 | |
Vendor = c8 | |
Device = 41 | |
Serial Nand Device Found With ID : 0xc8 0x41 | |
Serial NAND device Manufacturer:GD5F1GQ5REYIG | |
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit | |
qpic_nand: changing oobsize to 80 from 128 bytes | |
SPI_ADDR_LEN=3 | |
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x1000000 | |
272 MiB | |
MMC: sdhci: Node Not found, skipping initialization | |
PCI Link Intialized | |
In: serial@78AF000 | |
Out: serial@78AF000 | |
Err: serial@78AF000 | |
machid: 8040004 | |
eth0 MAC Address from ART is not valid | |
eth1 MAC Address from ART is not valid | |
Hit any key to stop autoboot: 0 | |
Net: cmbblk is stable 5 | |
MAC0 addr:0:11:22:33:44:55 | |
PHY ID1: 0x4d | |
PHY ID2: 0xd0c0 | |
MAC1 addr:0:11:22:33:44:56 | |
athrs17_reg_init: complete | |
athrs17_vlan_config ...done | |
S17c init done | |
eth0, eth1 | |
IPQ5018# | |
IPQ5018# | |
IPQ5018# | |
IPQ5018# tftpboot xx.bin | |
eth0 Down Speed :10 Half duplex | |
Port1 Down Speed :10M Half duplex | |
Port2 Up Speed :1000M Full duplex | |
Using eth1 device | |
TFTP from server 192.168.10.19; our IP address is 192.168.10.10 | |
Filename 'xx.bin'. | |
Load address: 0x44000000 | |
Loading: * | |
Got TFTP_OACK: TFTP remote port: changes from 69 to 63490 | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
##################### | |
4.7 MiB/s | |
done | |
Bytes transferred = 33700092 (20238fc hex) | |
IPQ5018# imgaddr=0x44000000 && source $imgaddr:script | |
## Executing script at 44000000 | |
crc32+ SPI_ADDR_LEN=3 | |
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
soc_hw_version : Validation success | |
machid : Validation success | |
Flashing sbl1: [ done ] | |
Flashing mibib: [ done ] | |
Flashing bootconfig: [ done ] | |
Flashing bootconfig1: [ done ] | |
Flashing tz: [ done ] | |
Flashing devcfg: [ done ] | |
Flashing ddr-AP-MP03.5-C1_128M16_DDR3: [ done ] | |
Flashing u-boot: [ done ] | |
Flashing ubi: [ done ] | |
Flashing wifi_fw_ipq5018_qcn6122cs: [ done ] | |
IPQ5018# reset | |
resetting ... | |
Format: Log Type - Time(microsec) - Message - Optional Info | |
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00059 | |
S - IMAGE_VARIANT_STRING=MAABANAZA | |
S - OEM_IMAGE_VERSION_STRING=CRM | |
S - Boot Config, 0x000002c1 | |
B - 128 - PBL, Start | |
B - 1562 - bootable_media_detect_entry, Start | |
B - 1739 - bootable_media_detect_success, Start | |
B - 1744 - elf_loader_entry, Start | |
B - 10169 - auth_hash_seg_entry, Start | |
B - 10524 - auth_hash_seg_exit, Start | |
B - 174841 - elf_segs_hash_verify_entry, Start | |
B - 237477 - PBL, End | |
B - 192577 - SBL1, Start | |
B - 253973 - GCC [RstStat:0x10, RstDbg:0x500100] WDog Stat : 0x4 | |
B - 262269 - clock_init, Start | |
D - 7350 - clock_init, Delta | |
B - 269803 - boot_flash_init, Start | |
D - 2775 - boot_flash_init, Delta | |
B - 273859 - boot_config_data_table_init, Start | |
D - 762 - boot_config_data_table_init, Delta - (575 Bytes) | |
B - 287035 - Boot Setting : 0x00033ecc | |
B - 289872 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4 | |
B - 300303 - sbl1_ddr_set_params, Start | |
B - 305427 - Pre_DDR_clock_init, Start | |
B - 307226 - Pre_DDR_clock_init, End | |
B - 951569 - do ddr sanity test, Start | |
D - 61 - do ddr sanity test, Delta | |
B - 956236 - Image Load, Start | |
D - 132827 - QSEE Image Loaded, Delta - (578956 Bytes) | |
B - 1089978 - Image Load, Start | |
D - 5734 - DEVCFG Image Loaded, Delta - (13592 Bytes) | |
B - 1095956 - Image Load, Start | |
D - 100528 - APPSBL Image Loaded, Delta - (417230 Bytes) | |
B - 1196576 - QSEE Execution, Start | |
D - 30 - QSEE Execution, Delta | |
B - 1203011 - SBL1, End | |
D - 1012935 - SBL1, Delta | |
S - Flash Throughput, 4765 KB/s (1011025 Bytes, 212147 us) | |
S - DDR Frequency, 666 MHz | |
S - Core 0 Frequency, 800 MHz | |
U-Boot 2016.01 (Aug 12 2021 - 09:21:56 +0000) | |
DRAM: smem ram ptable found: ver: 1 len: 4 | |
256 MiB | |
NAND: QPIC controller support serial NAND | |
ID = 41c841c8 | |
Vendor = c8 | |
Device = 41 | |
Serial Nand Device Found With ID : 0xc8 0x41 | |
Serial NAND device Manufacturer:GD5F1GQ5REYIG | |
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit | |
qpic_nand: changing oobsize to 80 from 128 bytes | |
SPI_ADDR_LEN=3 | |
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x1000000 | |
272 MiB | |
MMC: sdhci: Node Not found, skipping initialization | |
PCI Link Intialized | |
In: serial@78AF000 | |
Out: serial@78AF000 | |
Err: serial@78AF000 | |
machid: 8040004 | |
eth0 MAC Address from ART is not valid | |
eth1 MAC Address from ART is not valid | |
Hit any key to stop autoboot: 0 | |
ubi0: attaching mtd2 | |
ubi0: scanning is finished | |
ubi0: attached mtd2 (name "mtd=0", size 62 MiB) | |
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
ubi0: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0 | |
ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | |
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 766247865 | |
ubi0: available PEBs: 0, total reserved PEBs: 496, PEBs reserved for bad PEB handling: 40 | |
Read 0 bytes from volume kernel to 44000000 | |
No size specified -> Using max size (3840744) | |
## Loading kernel from FIT Image at 44000000 ... | |
Using 'config@mp03.5-c1' configuration | |
Trying 'kernel@1' kernel subimage | |
Description: ARM OpenWrt Linux-4.4.60 | |
Type: Kernel Image | |
Compression: lzma compressed | |
Data Start: 0x440000e4 | |
Data Size: 2411168 Bytes = 2.3 MiB | |
Architecture: ARM | |
OS: Linux | |
Load Address: 0x41208000 | |
Entry Point: 0x41208000 | |
Hash algo: crc32 | |
Hash value: c1125cb7 | |
Hash algo: sha1 | |
Hash value: bb0b41b9d141e95d88ef14e757c9a832c5174695 | |
Verifying Hash Integrity ... crc32+ sha1+ OK | |
## Loading fdt from FIT Image at 44000000 ... | |
Using 'config@mp03.5-c1' configuration | |
Trying 'fdt@mp03.5-c1' fdt subimage | |
Description: ARM OpenWrt qcom-ipq50xx-mpxx device tree blob | |
Type: Flat Device Tree | |
Compression: uncompressed | |
Data Start: 0x442d01b0 | |
Data Size: 59559 Bytes = 58.2 KiB | |
Architecture: ARM | |
Hash algo: crc32 | |
Hash value: f0dc6a69 | |
Hash algo: sha1 | |
Hash value: d6df5cb5a7a6896be4124540bea198b24e848c09 | |
Verifying Hash Integrity ... crc32+ sha1+ OK | |
Booting using the fdt blob at 0x442d01b0 | |
Uncompressing Kernel Image ... OK | |
Loading Device Tree to 4a3ee000, end 4a3ff8a6 ... OK | |
Using machid 0x8040004 from environment | |
Starting kernel ... | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 4.4.60 (ptpt52@SC-GAME) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 3e1428c+r49254) ) #297 SMP PREEMPT Fri Aug 13 06:45:00 UTC 2021 | |
[ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1 | |
[ 0.000000] Reserved memory: OVERLAP DETECTED! | |
[ 0.000000] q6_mem_regions@4B000000 (0x4b000000--0x4e400000) overlaps with q6_code_data@4B000000 (0x4b000000--0x4b060000) | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.0 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] PERCPU: Embedded 11 pages/cpu @8fd7d000 s14592 r8192 d22272 u45056 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 47552 | |
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 | |
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.000000] Memory: 182428K/192512K available (4915K kernel code, 281K rwdata, 1032K rodata, 1024K init, 323K bss, 10084K reserved, 0K cma-reserved, 0K highmem) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
[ 0.000000] vmalloc : 0x90800000 - 0xff800000 (1776 MB) | |
[ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB) | |
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) | |
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) | |
[ 0.000000] .text : 0x81208000 - 0x818cef38 (6940 kB) | |
[ 0.000000] .init : 0x81900000 - 0x81a00000 (1024 kB) | |
[ 0.000000] .data : 0x81a00000 - 0x81a465d8 ( 282 kB) | |
[ 0.000000] .bss : 0x81a49000 - 0x81a99df8 ( 324 kB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 32. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
[ 0.000000] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480] | |
[ 0.000000] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512] | |
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
[ 0.000018] Switching to timer-based delay loop, resolution 41ns | |
[ 0.000505] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
[ 0.000521] pid_max: default: 32768 minimum: 301 | |
[ 0.000628] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.000640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.001297] Initializing cgroup subsys io | |
[ 0.001324] Initializing cgroup subsys memory | |
[ 0.001358] Initializing cgroup subsys devices | |
[ 0.001374] Initializing cgroup subsys freezer | |
[ 0.001395] Initializing cgroup subsys net_cls | |
[ 0.001408] Initializing cgroup subsys pids | |
[ 0.001444] CPU: Testing write buffer coherency: ok | |
[ 0.001885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.001925] Setting up static identity map for 0x41300000 - 0x41300058 | |
[ 0.050078] MSM Memory Dump base table set up | |
[ 0.050110] MSM Memory Dump apps data table set up | |
[ 0.090439] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.090570] Brought up 2 CPUs | |
[ 0.090588] SMP: Total of 2 processors activated (96.00 BogoMIPS). | |
[ 0.090595] CPU: All CPU(s) started in SVC mode. | |
[ 0.104856] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4 | |
[ 0.105192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.105216] futex hash table entries: 512 (order: 3, 32768 bytes) | |
[ 0.105414] pinctrl core: initialized pinctrl subsystem | |
[ 0.106554] NET: Registered protocol family 16 | |
[ 0.108014] DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
[ 0.130229] cpuidle: using governor ladder | |
[ 0.160253] cpuidle: using governor menu | |
[ 0.160509] NET: Registered protocol family 42 | |
[ 0.165258] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider | |
[ 0.169812] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.171326] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.184684] CPU: IPQ5018, SoC Version: 1.1 | |
[ 0.186429] IPC logging disabled | |
[ 0.186439] IPC logging disabled | |
[ 0.186444] IPC logging disabled | |
[ 0.186449] IPC logging disabled | |
[ 0.186453] IPC logging disabled | |
[ 0.186697] sps:sps is ready. | |
[ 0.222231] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.222244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.222278] PTP clock support registered | |
[ 0.224160] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.224968] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.227251] NET: Registered protocol family 2 | |
[ 0.228060] TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.228096] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
[ 0.228139] TCP: Hash tables configured (established 2048 bind 2048) | |
[ 0.228200] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.228225] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.228418] NET: Registered protocol family 1 | |
[ 0.237064] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.237078] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.241621] Key type asymmetric registered | |
[ 0.241637] Asymmetric key parser 'x509' registered | |
[ 0.241669] io scheduler noop registered | |
[ 0.241677] io scheduler deadline registered (default) | |
[ 0.250282] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set | |
[ 0.250786] bt_driver 1943008.bt: bt_parse_ipc | |
[ 0.250844] bt_driver 1943008.bt: bt_parse_mem | |
[ 0.250892] bt_driver 1943008.bt: bt_parse_dt operating in secure mode | |
[ 0.252049] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 154, base_baud = 0) is a EUD UART | |
[ 0.253525] Registered Sucessfully | |
[ 0.254093] msm_serial 78af000.serial: msm_serial: detected port #0 | |
[ 0.254151] msm_serial 78af000.serial: uartclk = 1843199 | |
[ 0.254204] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 20, base_baud = 115199) is a MSM | |
[ 0.254235] msm_serial: console setup on port #0 | |
[ 0.900107] console [ttyMSM0] enabled | |
[ 0.905325] msm_serial: driver initialized | |
[ 0.908704] msm_serial_hsl_init: driver initialized | |
[ 0.919841] loop: module loaded | |
[ 0.920285] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 | |
[ 0.923755] m25p80 spi32766.0: found gd25lb128d, expected n25q128a11 | |
[ 0.929126] m25p80 spi32766.0: gd25lb128d (16384 Kbytes) | |
[ 0.935497] 14 ofpart partitions found on MTD device spi32766.0 | |
[ 0.940706] Creating 14 MTD partitions on "spi32766.0": | |
[ 0.946373] 0x000000000000-0x000000030000 : "0:SBL1" | |
[ 0.952680] 0x000000030000-0x000000040000 : "0:MIBIB" | |
[ 0.957892] 0x000000040000-0x000000050000 : "0:BOOTCONFIG" | |
[ 0.962843] 0x000000050000-0x000000060000 : "0:BOOTCONFIG1" | |
[ 0.968232] 0x000000060000-0x000000100000 : "0:QSEE" | |
[ 0.973569] 0x000000100000-0x0000001a0000 : "0:QSEE_1" | |
[ 0.978818] 0x0000001a0000-0x0000001b0000 : "0:DEVCFG" | |
[ 0.983721] 0x0000001b0000-0x0000001c0000 : "0:DEVCFG_1" | |
[ 0.988906] 0x0000001c0000-0x0000001d0000 : "0:CDT" | |
[ 0.994366] 0x0000001d0000-0x0000001e0000 : "0:CDT_1" | |
[ 0.999032] 0x0000001e0000-0x0000001f0000 : "0:APPSBLENV" | |
[ 1.004164] 0x0000001f0000-0x000000290000 : "0:APPSBL" | |
[ 1.009667] 0x000000290000-0x000000330000 : "0:APPSBL_1" | |
[ 1.014593] 0x000000330000-0x0000003a0000 : "0:ART" | |
[ 1.021094] QPIC controller hw version Major:2, Minor:1 | |
[ 1.023603] QPIC controller support serial nand. | |
[ 1.029174] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x41 | |
[ 1.033676] nand: GigaDevice GD5F1GQ5REYIG SPI NAND 1G | |
[ 1.040044] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 | |
[ 1.045616] 3 ofpart partitions found on MTD device qcom_nand.0 | |
[ 1.052513] Creating 3 MTD partitions on "qcom_nand.0": | |
[ 1.058449] 0x000000000000-0x000000080000 : "0:TRAINING" | |
[ 1.075573] 0x000000080000-0x000003e80000 : "rootfs" | |
[ 1.120567] mtd: device 15 (rootfs) set to be root filesystem | |
[ 1.120811] mtdsplit: no squashfs found in "rootfs" | |
[ 1.125342] 0x000003e80000-0x000007c80000 : "rootfs_1" | |
[ 1.186194] libphy: Fixed MDIO Bus: probed | |
[ 1.404975] qca-mdio 88000.mdio: Could not find phy-reset-gpio | |
[ 1.405155] libphy: qca_mdio: probed | |
[ 1.425417] qca-mdio 88000.mdio: qca-mdio driver was registered | |
[ 1.864993] qca-mdio 90000.mdio: Could not find phy-reset-gpio | |
[ 1.865174] libphy: qca_mdio: probed | |
[ 1.871350] qca-mdio 90000.mdio: qca-mdio driver was registered | |
[ 1.975259] cnss: INFO: IPC Logging is disabled! | |
[ 1.975933] cnss[2]: INFO: Platform driver probed successfully. plat 8f298010 tgt 0xfffc | |
[ 1.979343] cnss[41]: INFO: Platform driver probed successfully. plat 8f2a0010 tgt 0xfffb | |
[ 1.987427] i2c /dev entries driver | |
[ 1.996327] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed | |
[ 2.000139] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz | |
[ 2.005149] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz | |
[ 2.012381] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.020940] sdhci: Copyright(c) Pierre Ossman | |
[ 2.026918] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 2.032410] | |
[ 2.032410] Version Rollback Feature Disabled | |
[ 2.039484] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss | |
[ 2.042758] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available | |
[ 2.051403] q6v5_wcss_userpd1(8fda387c) node found | |
[ 2.058921] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1 | |
[ 2.062810] remoteproc remoteproc1: q6v5_wcss_userpd1 is available | |
[ 2.070366] q6v5_wcss_userpd2(8fda3b20) node found | |
[ 2.077534] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2 | |
[ 2.081374] remoteproc remoteproc2: q6v5_wcss_userpd2 is available | |
[ 2.089367] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 | |
[ 2.095243] coresight-csr 6001000.csr: CSR initialized | |
[ 2.102869] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 | |
[ 2.107831] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 | |
[ 2.115374] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 | |
[ 2.122694] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 | |
[ 2.130114] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 | |
[ 2.137486] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 | |
[ 2.144827] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 | |
[ 2.152239] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 | |
[ 2.159622] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 | |
[ 2.166987] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 | |
[ 2.174342] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 | |
[ 2.181762] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 | |
[ 2.189148] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 | |
[ 2.196508] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 | |
[ 2.203855] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 | |
[ 2.211282] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 | |
[ 2.218660] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 | |
[ 2.226208] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 | |
[ 2.233509] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 | |
[ 2.241033] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000 | |
[ 2.247987] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000 | |
[ 2.263658] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000 | |
[ 2.278165] sps:BAM 0x06064000 is registered.[ 2.285344] coresight-tmc 6048000.tmc: TMC initialized | |
[ 2.289453] coresight-tmc 6047000.tmc: TMC initialized | |
[ 2.294549] coresight-funnel 6041000.funnel: FUNNEL initialized | |
[ 2.299636] coresight-funnel 6100000.funnel: FUNNEL initialized | |
[ 2.305439] coresight-funnel 6120000.funnel: FUNNEL initialized | |
[ 2.311269] coresight-funnel 6130000.funnel: FUNNEL initialized | |
[ 2.317249] coresight-funnel 61a1000.funnel: FUNNEL initialized | |
[ 2.323854] coresight-etm4x 619c000.etm: ETM 4.0 initialized | |
[ 2.329499] coresight-etm4x 619d000.etm: ETM 4.0 initialized | |
[ 2.335007] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized | |
[ 2.340772] coresight-stm 6002000.stm: STM initialized | |
[ 2.349595] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 | |
[ 2.352952] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized | |
[ 2.364723] NET: Registered protocol family 10 | |
[ 2.369037] NET: Registered protocol family 17 | |
[ 2.372393] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 2.376836] Bridge firewalling registered | |
[ 2.389540] 8021q: 802.1Q VLAN Support v1.8 | |
[ 2.393652] Registering SWP/SWPB emulation handler | |
[ 2.416498] ubi0: attaching mtd15 | |
[ 2.564929] random: nonblocking pool is initialized | |
[ 2.615645] ubi0: scanning is finished | |
[ 2.619845] ubi0: attached mtd15 (name "rootfs", size 62 MiB) | |
[ 2.619870] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
[ 2.624563] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
[ 2.631369] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
[ 2.638208] ubi0: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0 | |
[ 2.644972] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | |
[ 2.651213] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 766247865 | |
[ 2.658257] ubi0: available PEBs: 20, total reserved PEBs: 476, PEBs reserved for bad PEB handling: 20 | |
[ 2.667225] ubi0: background thread "ubi_bgt0d" started, PID 90 | |
[ 2.775469] hctosys: unable to open rtc device (rtc0) | |
[ 2.782249] ALSA device list: | |
[ 2.782270] No soundcards found. | |
[ 2.786712] VFS: Mounted root (squashfs filesystem) readonly on device 31:20. | |
[ 2.789142] Freeing unused kernel memory: 1024K (81900000 - 81a00000) | |
[ 3.117932] init: Console is alive | |
[ 3.118136] init: - watchdog - | |
[ 3.873969] usbcore: registered new interface driver usbfs | |
[ 3.874063] usbcore: registered new interface driver hub | |
[ 3.878534] usbcore: registered new device driver usb | |
[ 3.885826] Button Hotplug driver version 0.4.1 | |
[ 3.892977] remoteproc remoteproc3: bt_rproc_driver is available | |
[ 3.893159] bt_rproc_driver bt_rproc_driver: Probed | |
[ 4.125166] init: - preinit - | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
Before mount_root | |
[ 6.422370] UBIFS (ubi0:4): default file-system created | |
[ 6.422858] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 124 | |
[ 6.447356] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "rootfs_data" | |
[ 6.447383] UBIFS (ubi0:4): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
[ 6.454161] UBIFS (ubi0:4): FS size: 31997952 bytes (30 MiB, 252 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs) | |
[ 6.464145] UBIFS (ubi0:4): reserved for root: 1511341 bytes (1475 KiB) | |
[ 6.474322] UBIFS (ubi0:4): media format: w4/r0 (latest is w4/r0), UUID 8C38F51D-9372-4B55-8E20-D025F7446D6D, small LPT model | |
[ 6.482500] mount_root: overlay filesystem has not been fully initialized yet | |
[ 6.492542] mount_root: switching to jffs2 overlay | |
After mount_root | |
131072+0 records in | |
131072+0 records out | |
131072 bytes (128.0KB) copied, 0.589575 seconds, 217.1KB/s | |
ln: /lib/firmware/IPQ5018/caldata.bin: No such file or directory | |
131072+0 records in | |
131072+0 records out | |
131072 bytes (128.0KB) copied, 0.563794 seconds, 227.0KB/s | |
ln: /lib/firmware/qcn9100/caldata_1.bin: No such file or directory | |
ln: /lib/firmware/qcn6122/caldata_1.bin: No such file or directory | |
131072+0 records in | |
131072+0 records out | |
131072 bytes (128.0KB) copied, 0.551341 seconds, 232.2KB/s | |
ln: /lib/firmware/qcn9100/caldata_2.bin: No such file or directory | |
ln: /lib/firmware/qcn6122/caldata_2.bin: No such file or directory | |
[ 8.317395] procd: - early - | |
[ 8.317502] procd: - watchdog - | |
[ 8.975239] procd: - ubus - | |
[ 9.987939] procd: - init - | |
Please press Enter to activate this console. | |
[ 10.503635] ubi: mtd15 is already attached to ubi0BT FW mount is successful | |
[ 10.668510] ubi: mtd15 is already attached to ubi0 WIFI FW mount is successful | |
ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 2 | |
[ 13.100500] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist! | |
[ 13.105561] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus | |
[ 13.111599] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000 | |
[ 13.118815] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000 | |
[ 13.125932] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xf | |
[ 13.132864] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit! | |
[ 13.138169] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit! | |
[ 13.144774] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist! | |
[ 13.151135] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist! | |
[ 13.157451] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 1 | |
[ 13.163090] ssdk_plat_init start | |
[ 15.574975] ssdk_mp_reset_init[739]:INFO:MP reset successfully! | |
[ 15.575037] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully! | |
[ 15.580848] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded! | |
[ 15.587393] regi_init[3598]:INFO:Initializing SCOMPHY! | |
[ 16.718992] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz | |
[ 16.719103] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:0 | |
[ 16.726965] ssdk_switch_register[1710]:INFO:Chip version 0xee | |
[ 16.734958] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist | |
[ 16.740550] ssdk_switch_register[1744]:INFO:polling is selected | |
[ 16.748717] regi_init[3608]:INFO:Initializing SCOMPHY Done!! | |
[ 16.754384] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist! | |
[ 16.760272] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: mdio | |
[ 16.766254] ssdk_dt_parse_mac_mode[292]:INFO:mac mode doesn't exit! | |
[ 16.773100] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit! | |
[ 16.779099] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit! | |
[ 16.785726] ssdk_dt_parse[1061]:INFO:switch node is qca83xx! | |
[ 16.792023] ssdk_plat_init start | |
[ 16.861701] f1_phy_api_ops_init[1517]:INFO:qca probe f1 phy driver succeeded! | |
[ 16.861722] regi_init[3556]:INFO:Initializing ISISC!! | |
[ 16.867846] /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /soc/pinctrl@1000000/audio_pinmux | |
[ 17.074964] qca_ar8327_gpio_reset[3489]:INFO:GPIO39 reset switch done | |
[ 17.075144] ssdk_switch_register[1718]:INFO:Chip version 0x1302 | |
[ 17.080400] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist | |
[ 17.086120] ssdk_switch_register[1744]:INFO:polling is selected | |
[ 18.734959] regi_init[3561]:INFO:Initializing ISISC Done!! | |
[ 18.735071] regi_init[3631]:INFO:qca-ssdk module init succeeded! | |
[ 18.746703] ********************************************************** | |
[ 18.746737] * NSS Data Plane driver | |
[ 18.752122] ********************************************************** | |
[ 18.787179] qca-nss 7a00000.nss: Direct firmware load for qca-nss0.bin failed with error -2 | |
[ 18.787208] qca-nss 7a00000.nss: Falling back to user helper | |
/lib/firmware/qca-nss0.bin 33 | |
[ 19.387138] nss_driver - fw of size 759276 bytes copied to load addr: 40000000, nss_id : 0 | |
[ 19.389086] Supported Frequencies - | |
[ 19.394285] 850 MHz 1 GHz | |
[ 19.399935] | |
[ 19.400892] 7f10fc40: set sdma 8e8e6000 | |
[ 19.402667] node size 2 # items 4 | |
[ 19.407190] memory: 40000000 268435456 (avl 199741440) items 4 active_cores 1 | |
[ 19.409317] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 | |
[ 19.416485] 7f10fc40: NSS core 0 DDR from 40000000 to 40800000 | |
[ 19.423286] 7f10fc40: meminfo init succeed | |
[ 19.451941] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 19.459847] node size 2 # items 4 | |
[ 19.459872] memory: 40000000 268435456 (avl 199741440) items 4 active_cores 1 | |
[ 19.462138] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 | |
[ 19.469295] 7f10fc40: nss core 0 booted successfully | |
[ 19.482827] nf_conntrack version 0.5.0 (2866 buckets, 11464 max) | |
[ 19.489991] QCA Hy-Fi multicast installation successfully | |
[ 19.492595] PPP generic driver version 2.4.2 | |
[ 19.495494] NET: Registered protocol family 24 | |
[ 19.502344] QCA multicast snooping installed successfully | |
[ 19.515895] cannot find nss-macsec0 node | |
[ 19.515982] cannot find nss-macsec1 node | |
[ 19.518982] cannot find nss-macsec2 node | |
[ 19.522821] nss_macsec init success | |
[ 19.529257] arp_tables: (C) 2002 David S. Miller | |
[ 19.532614] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 19.630146] nf_conntrack_rtsp v0.6.21 loading | |
[ 19.728787] nf_nat_rtsp v0.6.21 loading | |
[ 19.761986] xt_time: kernel timezone is -0000 | |
qcawifi configuration is disable | |
[ 26.392495] configuring additional NSS pbufs | |
[ 26.396324] additional pbufs of size 802816 got added to NSS | |
[ 26.444309] mem_manager: module license 'Proprietary' taints kernel. | |
[ 26.444336] Disabling lock debugging due to kernel taint | |
[ 26.476846] qdf: unknown parameter 'mem_debug_disabled' ignored | |
[ 30.677580] wlan: [975:I:RPTR] qca_multi_link_init_module: | |
[ 30.677580] ******QCA Repeater Initialization Done*********** | |
[ 30.677580] | |
***** starting cnssdaemon -i integrated -i integrated1 -i integrated2 ***** | |
*****cnssdaemon pid=1043********* | |
[ 32.023637] cnss[41]: INFO: Setting daemon_support=1 for instance_id 0x41 | |
[ 32.051149] cnss: ERR: Failed to get plat_priv for instance_id 0x42 | |
[ 32.075852] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2 | |
******No cold_boot_support***** | |
[ 33.158083] wlan: [1088:I:ANY] =======ol_if_register_wifi3_0========== | |
[ 33.158083] | |
[ 33.158121] wlan: [1088:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:7f7686e0 | |
[ 33.165068] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss | |
[ 33.201793] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820 | |
[ 34.960373] Subsystem error monitoring/handling services are up | |
[ 34.960755] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up | |
[ 34.961083] rpmsg_dev_probe: No pm domain | |
[ 34.961421] rpmsg_dev_probe: No pm domain | |
[ 34.977464] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 | |
[ 34.981093] remoteproc remoteproc1: powering up q6v5_wcss_userpd1 | |
[ 34.996991] q6v5_wcss_userpd1 wcss powered up successfully | |
[ 34.998975] Subsystem error monitoring/handling services are up | |
[ 35.001570] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 | |
[ 35.001807] remoteproc remoteproc1: remote processor q6v5_wcss_userpd1 is now up | |
[ 35.001869] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 | |
[ 35.001889] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 15 seconds | |
[ 35.029792] cnss[2]: INFO: device_id : 65532 mem mode : [2] | |
[ 35.037640] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1 | |
[ 35.047441] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2502826e, fw_build_timestamp: 2021-05-05 16:28, otp_version: s | |
[ 35.051192] cnss[2]: INFO: Boardid from dts:24,FW:ff | |
[ 35.080851] cnss[2]: INFO: BDF location : 0x4c400000 | |
[ 35.080877] cnss[2]: INFO: BDF IPQ5018/bdwlan.b24 size 131072 | |
[ 35.085956] cnss[2]: INFO: per device BDF location : 0x4c420000 | |
[ 35.090708] cnss[2]: INFO: CALDATA IPQ5018/caldata.bin size 131072 offset 0x20000 | |
[ 35.105024] cnss[2]: INFO: FW ready received for device 0xfffc | |
[ 35.105427] wlan: [1088:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode | |
[ 35.110052] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 | |
[ 35.121056] wlan: [1088:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4 | |
[ 35.124300] wlan: [1088:I:ANY] __ol_ath_attach: Allocated soc 89080500 | |
[ 35.133132] wlan: [1088:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully | |
[ 35.139742] wlan: [1088:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4 | |
[ 35.150912] wlan: [1088:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc | |
[ 35.160187] wlan: [1088:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1d | |
[ 35.170555] wlan: [1088:I:ANY] __ol_ath_attach: dev name soc0 | |
[ 35.179082] wlan: [1088:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 8efa7c00 | |
[ 35.188535] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.192261] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.202203] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.212185] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.222262] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.232305] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.242392] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.252460] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.262506] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.273873] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.282827] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.292745] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.302801] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1 | |
[ 35.312858] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.322943] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7 | |
[ 35.333040] wlan: [1088:I:ANY] htc_wmi_init: HT Create . 89207000 | |
[ 35.343080] wlan: [1088:I:ANY] htc_wmi_init: Skipping BMI Done | |
[ 35.349289] wlan: [1088:I:ANY] htc_wmi_init: host_enable 0 | |
[ 35.363853] wlan: [1088:I:ANY] ol_target_init_complete: CDP soc attach success | |
[ 35.363884] wlan: [1088:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 | |
[ 35.371516] wlan: [1088:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 89207000, ep 2, value 1 | |
[ 35.379541] wlan: [81:I:TIF] HE_CAP Info = 9a08010d | |
[ 35.387392] wlan: [81:I:TIF] Num HW modes = 1 | |
[ 35.392050] wlan: [81:I:TIF] Num PHY = 1 | |
[ 35.396583] wlan: [81:I:TIF] FW Build Version (Ext.) = 0 | |
[ 35.400534] wlan: [81:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 | |
[ 35.405852] wlan: [81:I:TIF] Preferred HW Mode = 0 Num Radios = 1 | |
[ 35.412567] wlan: [81:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes | |
[ 35.418655] wlan: [81:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0 | |
[ 35.432742] wlan: [81:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success | |
[ 35.441241] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 35.448334] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 35.455432] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 35.462965] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 35.472090] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 35.477827] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 35.485378] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 35.493006] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 35.500242] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 35.507774] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1 | |
[ 35.515407] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0 | |
[ 35.522608] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9 | |
[ 35.530170] wlan: [81:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:8efa7c00 | |
[ 35.539609] wlan: [81:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9 | |
[ 35.546454] wlan: [81:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success | |
[ 35.656263] wlan: [81:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 | |
[ 35.695209] wlan: [81:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 | |
[ 35.695245] wlan: [81:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528 | |
[ 35.695245] | |
[ 35.702549] wlan: [1088:I:ANY] ol_ath_connect_htc: WMI is ready | |
[ 35.721214] wlan: [1088:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d | |
[ 35.721250] wlan: [1088:E:NSS] [nss-wifili]: pdev:87980500 radio_ifnum:28 scheme_id:1 radio_priority:0 | |
[ 35.732722] wlan: [1088:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL | |
[ 35.740620] wlan: [1088:I:ANY] ol_ath_soc_attach: connect HTC | |
[ 35.746353] wlan: [1088:I:ANY] ol_ath_soc_attach: bypasswmi : 0 | |
[ 35.752161] wlan: [1088:I:MSCS] qca_mscs_module_init: | |
[ 35.752161] ****QCA MSCS Initialization Done**** SoC 89080500 | |
[ 35.757517] wlan: [1088:I:ANY] ol_ath_soc_attach: UMAC attach | |
[ 35.769990] wlan: [1088:I:ANY] __ol_ath_attach: pdev_netdev name wifi0 | |
[ 35.774230] wlan: [1088:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target | |
[ 35.780688] wlan: [1088:I:ANY] __ol_ath_attach: BURSTING enabled by default | |
[ 35.788084] wlan: [1088:I:ANY] ol_ath_pdev_attach: interface_id 0 | |
[ 35.794584] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported | |
[ 35.800823] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 | |
[ 35.808484] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 | |
[ 35.818030] wlan: [1088:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update | |
[ 35.832166] wlan: [1088:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update | |
[ 35.840932] wlan: [1088:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case | |
[ 35.850086] wlan: [1088:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:38:38 soc: soc0 pdev: wifi0 | |
[ 35.857334] wlan: [1088:I:MBSSIE] ieee80211_mbss_attach: :> | |
[ 35.870110] wlan: [1088:I:MBSSIE] ieee80211_mbss_attach: :< | |
[ 35.874311] wlan: [1088:I:ANY] ol_resmgr_create: OL Resmgr Init-ed | |
[ 35.880196] wlan: [1088:I:ANY] acfg_attach: acfg_attach: 3323: Netlink socket created:8917d000 | |
[ 35.886178] wlan: [1088:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1 | |
[ 35.895264] wlan: [1088:I:ANY] wlan_scan_update_channel_list: num_chan: 11 | |
[ 35.901853] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:7f5b5e9c | |
[ 35.908441] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(8917c408) Enabling DBDC Repeater 0 soc_lag 8915f180 | |
[ 35.915712] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed | |
[ 35.925425] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(8917c408) is_primary 0 | |
[ 35.933649] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled | |
[ 35.941340] wlan: [1088:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty | |
[ 35.948779] wlan: [1088:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 4096 | |
[ 35.958032] wlan: [1088:I:ANY] __ol_ath_attach: needed_headroom reservation 44 | |
[ 35.968351] wlan: [1088:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 | |
[ 35.974263] wlan: [1088:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11 | |
[ 35.984641] wlan: [1088:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x87980500, wdev: 0x87997c40, wiphy: 0x87077960, netdev: 0x87980000 | |
[ 35.992677] wlan: [1088:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0 | |
[ 36.005062] wlan: [1088:E:QLD] qld_register: Handle or address is NULL | |
[ 36.013213] wlan: [1088:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = 87980500_radio_type = 2 | |
[ 36.019896] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1 | |
[ 36.029709] remoteproc remoteproc2: powering up q6v5_wcss_userpd2 | |
[ 36.040711] Subsystem error monitoring/handling services are up | |
[ 36.043607] remoteproc remoteproc2: remote processor q6v5_wcss_userpd2 is now up | |
[ 36.049667] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1 | |
[ 36.057053] cnss[41]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 15 seconds | |
[ 52.774982] cnss[41]: ERR: FW ready timed-out 15 seconds | |
[ 52.775006] qmi_history_index [27] | |
[ 52.779376] qmi_history[0]:timestamp[35023] instance_id [0x2] msg_id[0x20] err[0] resp_err[0] | |
[ 52.782587] qmi_history[1]:timestamp[35024] instance_id [0x2] msg_id[0x20] err[0] resp_err[0] | |
[ 52.791232] qmi_history[2]:timestamp[35037] instance_id [0x2] msg_id[0x34] err[0] resp_err[0] | |
[ 52.799738] qmi_history[3]:timestamp[35038] instance_id [0x2] msg_id[0x34] err[0] resp_err[0] | |
[ 52.808226] qmi_history[4]:timestamp[35040] instance_id [0x2] msg_id[0xD020] err[0] resp_err[0] | |
[ 52.816901] qmi_history[5]:timestamp[35041] instance_id [0x2] msg_id[0x35] err[0] resp_err[0] | |
[ 52.825248] qmi_history[6]:timestamp[35041] instance_id [0x2] msg_id[0x36] err[0] resp_err[0] | |
[ 52.833913] qmi_history[7]:timestamp[35041] instance_id [0x2] msg_id[0xD020] err[0] resp_err[0] | |
[ 52.842431] qmi_history[8]:timestamp[35042] instance_id [0x2] msg_id[0x36] err[0] resp_err[0] | |
[ 52.850929] qmi_history[9]:timestamp[35042] instance_id [0x2] msg_id[0xD037] err[0] resp_err[0] | |
[ 52.859618] qmi_history[10]:timestamp[35042] instance_id [0x2] msg_id[0x37] err[0] resp_err[0] | |
[ 52.869384] qmi_history[11]:timestamp[35042] instance_id [0x2] msg_id[0xD024] err[0] resp_err[0] | |
[ 52.876802] qmi_history[12]:timestamp[35042] instance_id [0x2] msg_id[0x24] err[0] resp_err[0] | |
[ 52.885752] qmi_history[13]:timestamp[35042] instance_id [0x2] msg_id[0x24] err[0] resp_err[0] | |
[ 52.894163] qmi_history[14]:timestamp[35042] instance_id [0x2] msg_id[0xD024] err[0] resp_err[0] | |
[ 52.902761] qmi_history[15]:timestamp[35042] instance_id [0x2] msg_id[0xD026] err[0] resp_err[0] | |
[ 52.911869] qmi_history[16]:timestamp[35046] instance_id [0x2] msg_id[0x25] err[0] resp_err[0] | |
[ 52.920486] qmi_history[17]:timestamp[35046] instance_id [0x2] msg_id[0xD026] err[0] resp_err[0] | |
[ 52.928876] qmi_history[18]:timestamp[35080] instance_id [0x2] msg_id[0x25] err[0] resp_err[0] | |
[ 52.937828] qmi_history[19]:timestamp[35080] instance_id [0x2] msg_id[0x25] err[0] resp_err[0] | |
[ 52.946254] qmi_history[20]:timestamp[35091] instance_id [0x2] msg_id[0x25] err[0] resp_err[0] | |
[ 52.954817] qmi_history[21]:timestamp[35091] instance_id [0x2] msg_id[0x3C] err[0] resp_err[0] | |
[ 52.963445] qmi_history[22]:timestamp[35091] instance_id [0x2] msg_id[0x3C] err[0] resp_err[0] | |
[ 52.973287] qmi_history[23]:timestamp[35091] instance_id [0x2] msg_id[0x38] err[0] resp_err[0] | |
[ 52.980620] qmi_history[24]:timestamp[35104] instance_id [0x2] msg_id[0x23] err[0] resp_err[0] | |
[ 52.989217] qmi_history[25]:timestamp[35105] instance_id [0x2] msg_id[0x23] err[0] resp_err[0] | |
[ 52.997834] qmi_history[26]:timestamp[35112] instance_id [0x2] msg_id[0x22] err[0] resp_err[0] | |
[ 53.006569] qmi_history[27]:timestamp[35115] instance_id [0x2] msg_id[0x22] err[0] resp_err[0] | |
[ 53.015010] cnss[41]: ERR: ASSERT at line 718 | |
[ 53.023613] ------------[ cut here ]------------ | |
[ 53.027960] Kernel BUG at 815f5044 [verbose debug info unavailable] | |
[ 53.032649] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM | |
[ 53.038637] Modules linked in: wifi_3_0(+) qca_ol umac asf(P) qdf mem_manager(P) iptable_nat nf_nat_pptp nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_cn | |
[ 53.179000] CPU: 0 PID: 1088 Comm: insmod Tainted: P 4.4.60 #297 | |
[ 53.179264] Hardware name: Generic DT based system | |
[ 53.186381] task: 8ef72400 ti: 88d68000 task.ti: 88d68000 | |
[ 53.191244] pc : [<815f5044>] lr : [<815f5044>] psr: 60000013 | |
[ 53.191244] sp : 88d69c30 ip : 00000000 fp : 8f94c810 | |
[ 53.196717] r10: 8efa98a8 r9 : 0000000a r8 : 81a2ef9c | |
[ 53.207995] r7 : 81a2efb4 r6 : 00000097 r5 : 8f2a0010 r4 : 8f2a2010 | |
[ 53.213204] r3 : 00000004 r2 : 00000000 r1 : 60000013 r0 : 00000021 | |
[ 53.219803] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user | |
[ 53.226313] Control: 10c0383d Table: 4922c06a DAC: 00000055 | |
[ 53.233516] Process insmod (pid: 1088, stack limit = 0x88d68210) | |
[ 53.239247] Stack: (0x88d69c30 to 0x88d6a000) | |
[ 53.245323] 9c20: 00000000 8185950c 7f68ee4c 8f94c800 | |
[ 53.249583] 9c40: 00000001 7f68ee5c 8efa98a8 7f648a84 00000001 7f68ee5c 8efa98a8 81644c80 | |
[ 53.257742] 9c60: 81a83104 7f690208 a0000013 8fda4214 00000001 81644ce4 8f94c810 00000000 | |
[ 53.265901] 9c80: 7f68ee4c 8f94c800 00000001 00000000 00000003 7f68ee4c 8f94c800 00000001 | |
[ 53.274062] 9ca0: 7f68ee5c 8efa98a8 817c17a0 7f64952c 7f68ee5c 00000003 00000001 8efa98a8 | |
[ 53.282222] 9cc0: 8185950c 7f3366ac 2e180f3f 00000008 89df4e80 7f6062bc 8f94c800 8f94c810 | |
[ 53.290380] 9ce0: 8185950c 8f2a02a8 00000000 7f6bf9a8 88d69d7c 00000000 815f528c 8efa98a8 | |
[ 53.298540] 9d00: 817c17a0 815f52b0 ffffffff 00000000 00000003 88d69d7c 00000000 81335d9c | |
[ 53.306700] 9d20: 8f2c724c 8f2c7234 00000000 00000003 88d69d7c ffffffff 8efa98a8 81336184 | |
[ 53.314859] 9d40: 00000000 00000003 88d69d7c 00000001 88d69db0 00000003 81a7bfe0 81a7bffc | |
[ 53.323020] 9d60: 8f2a5010 813361b4 00000000 00000003 88d69d7c 81566534 8f2cbb90 00000000 | |
[ 53.331179] 9d80: 00000000 00000000 8f28d000 8f297600 8f28d000 8f28d0ec 88d69dac 00000000 | |
[ 53.339339] 9da0: 00000000 81567234 8a3f3124 8f28d000 8f2a0010 00000001 7f6bf9a8 81a7d204 | |
[ 53.347499] 9dc0: 81a7d22c 815f8944 89df4e80 7f76892c 00000000 7f7687cc 00000000 7f768808 | |
[ 53.355658] 9de0: 8efa98a8 7f60641c 7f76a000 7f76892c 00000000 7f741c4c 00000001 7f7686e0 | |
[ 53.363818] 9e00: 7f76a000 7f76a044 00000000 816f5848 ff0a0004 8130be2c 00000000 8f905000 | |
[ 53.371978] 9e20: 8fef71ec 813950ac 00000000 81a05a10 8fd82b0c 8fd82b00 8fd82b00 00000000 | |
[ 53.380137] 9e40: 8fef6d00 00000001 8fef6d10 8fdb9000 8fef6d00 00000000 00040000 00000000 | |
[ 53.388297] 9e60: 81a701f4 7f7687c0 7f76892c 7f7687c0 7f76892c 89252100 7f7687cc 00000000 | |
[ 53.396458] 9e80: 7f768808 8137ad50 7f7687c0 60000013 88d69f48 7f76892c 7f7687c0 8137bff8 | |
[ 53.404617] 9ea0: 7f7687cc 00007fff 7f7687c0 81379fc0 90803000 81a02434 81303ca0 20000013 | |
[ 53.412777] 9ec0: 95495084 817c177c 7f768934 76f3a4f0 954c3d60 76ef9d84 00009220 00065d2b | |
[ 53.420936] 9ee0: 0005c968 7f742fc0 0000000a 00000000 00000000 00000000 00000000 00000000 | |
[ 53.429095] 9f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
[ 53.437256] 9f20: 00000000 000038fc 76f0690c 00000000 954d08fc 76f3a4f0 88d68000 00000000 | |
[ 53.445415] 9f40: 00000000 8137c258 953fd000 000d38fc 95494abc 9549493d 954a4794 00000000 | |
[ 53.453574] 9f60: 00000000 00000000 00000000 00000000 00000025 00000026 0000001b 00000000 | |
[ 53.461734] 9f80: 00000017 00000000 000d38fc 00000000 00000000 00000003 00000080 81301d24 | |
[ 53.469895] 9fa0: 88d68000 81301b80 00000000 00000000 76e33010 000d38fc 76f3a4f0 00001f14 | |
[ 53.478053] 9fc0: 00000000 00000000 00000003 00000080 000d38fc 00000000 54b42f20 00000000 | |
[ 53.486214] 9fe0: 7edf8d14 7edf8cf8 54b31d5c 76f73674 60000010 76e33010 0000012a 00004c58 | |
[ 53.494376] Function entered at [<815f5044>] from [<7f648a84>] | |
[ 53.502613] Function entered at [<7f648a84>] from [<7f64952c>] | |
[ 53.508257] Function entered at [<7f64952c>] from [<815f52b0>] | |
[ 53.514071] Function entered at [<815f52b0>] from [<81335d9c>] | |
[ 53.519890] Function entered at [<81335d9c>] from [<81336184>] | |
[ 53.525704] Function entered at [<81336184>] from [<813361b4>] | |
[ 53.531519] Function entered at [<813361b4>] from [<81566534>] | |
[ 53.537336] Function entered at [<81566534>] from [<81567234>] | |
[ 53.543151] Function entered at [<81567234>] from [<815f8944>] | |
[ 53.548967] Function entered at [<815f8944>] from [<7f60641c>] | |
[ 53.554784] Function entered at [<7f60641c>] from [<7f741c4c>] | |
[ 53.560629] Function entered at [<7f741c4c>] from [<7f76a044>] | |
[ 53.566430] Function entered at [<7f76a044>] from [<8130be2c>] | |
[ 53.572232] Function entered at [<8130be2c>] from [<8137ad50>] | |
[ 53.578049] Function entered at [<8137ad50>] from [<8137bff8>] | |
[ 53.583864] Function entered at [<8137bff8>] from [<8137c258>] | |
[ 53.589679] Function entered at [<8137c258>] from [<81301b80>] | |
[ 53.595499] Code: e30022ce e59411d4 e59f0040 ebf5809a (e7f001f2) | |
[ 53.601314] ---[ end trace c2f9a58808160442 ]--- | |
[ 53.607475] Kernel panic - not syncing: Fatal exception | |
[ 53.612168] CPU1: stopping | |
[ 53.617112] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.4.60 #297 | |
[ 53.619888] Hardware name: Generic DT based system | |
[ 53.627096] Function entered at [<813168dc>] from [<81313498>] | |
[ 53.631954] Function entered at [<81313498>] from [<814ec698>] | |
[ 53.637770] Function entered at [<814ec698>] from [<81315ca8>] | |
[ 53.643585] Function entered at [<81315ca8>] from [<813013a0>] | |
[ 53.649401] Function entered at [<813013a0>] from [<813024c0>] | |
[ 53.655218] Exception stack(0x8f871f98 to 0x8f871fe0) | |
[ 53.661034] 1f80: 00000001 00000000 | |
[ 53.666162] 1fa0: 00000000 81303360 00000000 8f870000 00000000 819322cc 8f871ff0 51af8014 | |
[ 53.674321] 1fc0: 00000000 00000000 00000000 8f871fe8 81310fd8 81310fdc 60000013 ffffffff | |
[ 53.682479] Function entered at [<813024c0>] from [<81310fdc>] | |
[ 53.690634] Function entered at [<81310fdc>] from [<813502fc>] | |
[ 53.696365] Function entered at [<813502fc>] from [<4130144c>] | |
[ 58.702399] bt_driver 1943008.bt: IPQ crashed, inform BT to prepare dump | |
[ 58.702419] bt_driver 1943008.bt: BT IPC not initialized, no message sent | |
[ 59.308192] Rebooting in 5 seconds.. |
Hi,I used the same flash,but it boot failed on boot.
U-Boot 2016.01 (Apr 15 2022 - 11:10:56 +0800)
DRAM: smem ram ptable found: ver: 1 len: 4
256 MiB
NAND: QPIC controller support serial NAND
ID = 41c841c8
Vendor = c8
Device = 41
Serial Nand Device Found With ID : 0xc8 0x41
Serial NAND device Manufacturer:GD5F1GQ5REYIG
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
Training data read failed @ lower frequency
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: sdhci: Node Not found, skipping initialization
*** Warning - bad CRC, using default environment
PCI Link Intialized
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040002
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Hit any key to stop autoboot: 0
ubi0: attaching mtd1
qpic_nand_read_page_scope_multi_page: ecc failure while reading from 18a0800
qpic_nand_read_page_scope_multi_page: ecc failure while reading from 18a0800
qpic_nand_read_page_scope_multi_page: ecc failure while reading from 18a0800
qpic_nand_read_page_scope_multi_page: ecc failure while reading from 18a0800
I used img_gen(./img_gen image -h -8 -O 128 -o burn_ecc.img) tool to generate a burn imgae.
But it failed to boot.
What changes did you make when using 256M DDR? I adapted 256M DDRUboot but it didn't work,Would you mind telling me? Thanks.
log:
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00066
S - IMAGE_VARIANT_STRING=MAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c1
B - 126 - PBL, Start
B - 1560 - bootable_media_detect_entry, Start
B - 1737 - bootable_media_detect_success, Start
B - 1742 - elf_loader_entry, Start
B - 10166 - auth_hash_seg_entry, Start
B - 10523 - auth_hash_seg_exit, Start
B - 174958 - elf_segs_hash_verify_entry, Start
B - 237638 - PBL, End
B - 192699 - SBL1, Start
B - 254065 - GCC [RstStat:0x10, RstDbg:0x500100] WDog Stat : 0x4
B - 262391 - clock_init, Start
D - 7228 - clock_init, Delta
B - 269803 - boot_flash_init, Start
D - 2531 - boot_flash_init, Delta
B - 274164 - boot_config_data_table_init, Start
D - 793 - boot_config_data_table_init, Delta - (575 Bytes)
B - 286273 - Boot Setting : 0x00023ecc
B - 289658 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:2
B - 299540 - sbl1_ddr_set_params, Start
B - 304146 - Pre_DDR_clock_init, Start
B - 306647 - Pre_DDR_clock_init, End
B - 950105 - do ddr sanity test, Start
D - 61 - do ddr sanity test, Delta
B - 954772 - Image Load, Start
B - 1011410 - Error code 4 at boot_error_handler.c Line 495
What changes did you make when using 256M DDR? I adapted 256M DDRUboot but it didn't work,Would you mind telling me? Thanks. log: Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00066 S - IMAGE_VARIANT_STRING=MAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x000002c1 B - 126 - PBL, Start B - 1560 - bootable_media_detect_entry, Start B - 1737 - bootable_media_detect_success, Start B - 1742 - elf_loader_entry, Start B - 10166 - auth_hash_seg_entry, Start B - 10523 - auth_hash_seg_exit, Start B - 174958 - elf_segs_hash_verify_entry, Start B - 237638 - PBL, End B - 192699 - SBL1, Start B - 254065 - GCC [RstStat:0x10, RstDbg:0x500100] WDog Stat : 0x4 B - 262391 - clock_init, Start D - 7228 - clock_init, Delta B - 269803 - boot_flash_init, Start D - 2531 - boot_flash_init, Delta B - 274164 - boot_config_data_table_init, Start D - 793 - boot_config_data_table_init, Delta - (575 Bytes) B - 286273 - Boot Setting : 0x00023ecc B - 289658 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:2 B - 299540 - sbl1_ddr_set_params, Start B - 304146 - Pre_DDR_clock_init, Start B - 306647 - Pre_DDR_clock_init, End B - 950105 - do ddr sanity test, Start D - 61 - do ddr sanity test, Delta B - 954772 - Image Load, Start B - 1011410 - Error code 4 at boot_error_handler.c Line 495
did you solve this problem? I also get this error.
HI, were you able to resolve this crash caused by [ 52.774982] cnss[41]: ERR: FW ready timed-out 15 seconds ?