-
-
Save cscashby/a293f50d3a55fb51dac35d51cafd5901 to your computer and use it in GitHub Desktop.
ESPHome config for Gosund UP111 powerplugs (EDIT KEYS!)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- | |
substitutions: | |
devicename: "plug-XXX" | |
upper_devicename: "Plug XXX" | |
# Higher value gives lower watt readout | |
current_res: "0.002452" | |
# Lower value gives lower voltage readout | |
voltage_div: "939" | |
# GPIO config | |
sel_pin: GPIO12 | |
cf_pin: GPIO04 | |
cf1_pin: GPIO05 | |
button_pin: GPIO03 | |
relay_pin: GPIO14 | |
red_led_pin: GPIO13 | |
blue_led_pin: GPIO01 | |
esphome: | |
name: ${devicename} | |
esp8266: | |
board: esp01_1m | |
# Enable logging | |
logger: | |
# Enable Home Assistant API | |
api: | |
encryption: | |
key: "<INSERT KEY HERE>" | |
ota: | |
password: "<INSERT KEY HERE>" | |
wifi: | |
ssid: !secret wifi_ssid | |
password: !secret wifi_password | |
# Enable fallback hotspot (captive portal) in case wifi connection fails | |
ap: | |
ssid: "Plug-XXX Fallback Hotspot" | |
password: "lVhCyIMtpsJ4" | |
# Enable Web server | |
web_server: | |
port: 80 | |
# see: https://esphome.io/components/time.html | |
time: | |
- platform: homeassistant | |
id: homeassistant_time | |
text_sensor: | |
- platform: version | |
name: "Version" | |
icon: mdi:cube-outline | |
- platform: wifi_info | |
ip_address: | |
name: ip | |
ssid: | |
name: ssid | |
bssid: | |
name: bssid | |
sensor: | |
- platform: wifi_signal | |
name: "Wifi Signal" | |
icon: mdi:wifi | |
- platform: uptime | |
name: "Uptime" | |
icon: mdi:clock-outline | |
- platform: hlw8012 | |
sel_pin: | |
number: ${sel_pin} | |
inverted: True | |
cf_pin: ${cf_pin} | |
cf1_pin: ${cf1_pin} | |
current_resistor: ${current_res} | |
voltage_divider: ${voltage_div} | |
update_interval: 3s | |
change_mode_every: 3 | |
current: | |
name: "Ampere" | |
unit_of_measurement: A | |
accuracy_decimals: 3 | |
icon: mdi:current-ac | |
voltage: | |
name: "Volt" | |
unit_of_measurement: V | |
accuracy_decimals: 1 | |
icon: mdi:flash-outline | |
power: | |
name: "Watt" | |
unit_of_measurement: W | |
id: "power_wattage" | |
icon: mdi:gauge | |
- platform: total_daily_energy | |
name: "Todays Usage" | |
power_id: "power_wattage" | |
filters: | |
# Multiplication factor from W to kW is 0.001 | |
- multiply: 0.001 | |
unit_of_measurement: kWh | |
icon: mdi:calendar-clock | |
binary_sensor: | |
# Binary sensor for the button press | |
- platform: gpio | |
name: button | |
pin: | |
number: ${button_pin} | |
inverted: true | |
on_press: | |
- switch.toggle: relay | |
switch: | |
# Switch to restart the plug | |
- platform: restart | |
name: restart | |
# Switch to toggle the relay | |
- platform: gpio | |
id: relay | |
name: switch | |
pin: ${relay_pin} | |
on_turn_on: | |
- light.turn_on: led | |
on_turn_off: | |
- light.turn_off: led | |
output: | |
# Relay state led | |
- platform: esp8266_pwm | |
id: state_led | |
pin: | |
number: ${red_led_pin} | |
inverted: true | |
light: | |
# Relay state light | |
- platform: monochromatic | |
output: state_led | |
id: led | |
status_led: | |
# Status light | |
pin: | |
number: ${blue_led_pin} | |
inverted: true |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment