Last active
February 1, 2023 12:34
-
-
Save Bouni/40f21d99e44df3d2cbecb575bf8b7e9b to your computer and use it in GitHub Desktop.
ESPHome config for Gosund SP111 V1.4 powerplugs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- | |
substitutions: | |
devicename: "powerplug-1" | |
upper_devicename: "Powerplug 1" | |
# Higher value gives lower watt readout | |
current_res: "0.002452" | |
# Lower value gives lower voltage readout | |
voltage_div: "939" | |
# GPIO config | |
sel_pin: GPIO12 | |
cf_pin: GPIO05 | |
cf1_pin: GPIO14 | |
button_pin: GPIO13 | |
relay_pin: GPIO15 | |
red_led_pin: GPIO00 | |
blue_led_pin: GPIO01 | |
esphome: | |
name: $devicename | |
platform: ESP8266 | |
board: esp8285 | |
# Wifi settings | |
wifi: | |
networks: | |
- ssid: !secret wifi_ssid_home | |
password: !secret wifi_password_home | |
- ssid: !secret wifi_ssid_work | |
password: !secret wifi_password_work | |
# Enable logging | |
logger: | |
# Enable Home Assistant API | |
api: | |
# Enable over the air updates | |
ota: | |
# Enable Web server | |
web_server: | |
port: 80 | |
# see: https://esphome.io/components/time.html | |
time: | |
- platform: homeassistant | |
id: homeassistant_time | |
text_sensor: | |
- platform: version | |
name: "Version" | |
icon: mdi:cube-outline | |
- platform: wifi_info | |
ip_address: | |
name: ip | |
ssid: | |
name: ssid | |
bssid: | |
name: bssid | |
sensor: | |
- platform: wifi_signal | |
name: "Wifi Signal" | |
icon: mdi:wifi | |
- platform: uptime | |
name: "Uptime" | |
icon: mdi:clock-outline | |
- platform: hlw8012 | |
sel_pin: | |
number: ${sel_pin} | |
inverted: True | |
cf_pin: ${cf_pin} | |
cf1_pin: ${cf1_pin} | |
current_resistor: ${current_res} | |
voltage_divider: ${voltage_div} | |
update_interval: 3s | |
change_mode_every: 3 | |
current: | |
name: "Ampere" | |
unit_of_measurement: A | |
accuracy_decimals: 3 | |
icon: mdi:current-ac | |
voltage: | |
name: "Volt" | |
unit_of_measurement: V | |
accuracy_decimals: 1 | |
icon: mdi:flash-outline | |
power: | |
name: "Watt" | |
unit_of_measurement: W | |
id: "power_wattage" | |
icon: mdi:gauge | |
- platform: total_daily_energy | |
name: "Todays Usage" | |
power_id: "power_wattage" | |
filters: | |
# Multiplication factor from W to kW is 0.001 | |
- multiply: 0.001 | |
unit_of_measurement: kWh | |
icon: mdi:calendar-clock | |
binary_sensor: | |
# Binary sensor for the button press | |
- platform: gpio | |
name: button | |
pin: | |
number: ${button_pin} | |
inverted: true | |
on_press: | |
- switch.toggle: relay | |
switch: | |
# Switch to restart the plug | |
- platform: restart | |
name: restart | |
# Switch to toggle the relay | |
- platform: gpio | |
id: relay | |
name: switch | |
pin: ${relay_pin} | |
on_turn_on: | |
- light.turn_on: led | |
on_turn_off: | |
- light.turn_off: led | |
output: | |
# Relay state led | |
- platform: esp8266_pwm | |
id: state_led | |
pin: | |
number: ${red_led_pin} | |
inverted: true | |
light: | |
# Relay state light | |
- platform: monochromatic | |
output: state_led | |
id: led | |
status_led: | |
# Status light | |
pin: | |
number: ${blue_led_pin} | |
inverted: true |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
wifi_ssid
andwifi_password
esphome compile sp11.yml
powerplug/.pioenv/powerplug/firmware.bin
using OTA (gzip firmware.bin first if Tasmota 9.5 is running)